All ARM64 iommu drivers should support IOMMU_DOMAIN_DMA to enable
dma-iommu.c.
tegra is blocking dma-iommu usage, and also default_domain's, because it
wants an identity translation. This is needed for some device quirk. The
correct way to do this is to support IDENTITY domains and use
ops->def_domain_type() to return IOMMU_DOMAIN_IDENTITY for only the quirky
devices.
Add support for IOMMU_DOMAIN_DMA and force IOMMU_DOMAIN_IDENTITY mode for
everything so no behavior changes.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
What tegra-smmu does during tegra_smmu_set_platform_dma() is actually
putting the iommu into identity mode.
Move to the new core support for ARM_DMA_USE_IOMMU by defining
ops->identity_domain.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
What exynos calls exynos_iommu_detach_device is actually putting the iommu
into identity mode.
Move to the new core support for ARM_DMA_USE_IOMMU by defining
ops->identity_domain.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Even though dma-iommu.c and CONFIG_ARM_DMA_USE_IOMMU do approximately the
same stuff, the way they relate to the IOMMU core is quiet different.
dma-iommu.c expects the core code to setup an UNMANAGED domain (of type
IOMMU_DOMAIN_DMA) and then configures itself to use that domain. This
becomes the default_domain for the group.
ARM_DMA_USE_IOMMU does not use the default_domain, instead it directly
allocates an UNMANAGED domain and operates it just like an external
driver. In this case group->default_domain is NULL.
If the driver provides a global static identity_domain then automatically
use it as the default_domain when in ARM_DMA_USE_IOMMU mode.
This allows drivers that implemented default_domain == NULL as an IDENTITY
translation to trivially get a properly labeled non-NULL default_domain on
ARM32 configs.
With this arrangment when ARM_DMA_USE_IOMMU wants to disconnect from the
device the normal detach_domain flow will restore the IDENTITY domain as
the default domain. Overall this makes attach_dev() of the IDENTITY domain
called in the same places as detach_dev().
This effectively migrates these drivers to default_domain mode. For
drivers that support ARM64 they will gain support for the IDENTITY
translation mode for the dma_api and behave in a uniform way.
Drivers use this by setting ops->identity_domain to a static singleton
iommu_domain that implements the identity attach. If the core detects
ARM_DMA_USE_IOMMU mode then it automatically attaches the IDENTITY domain
during probe.
Drivers can continue to prevent the use of DMA translation by returning
IOMMU_DOMAIN_IDENTITY from def_domain_type, this will completely prevent
IOMMU_DMA from running but will not impact ARM_DMA_USE_IOMMU.
This allows removing the set_platform_dma_ops() from every remaining
driver.
Remove the set_platform_dma_ops from rockchip and mkt_v1 as all it does
is set an existing global static identity domain. mkt_v1 does not support
IOMMU_DOMAIN_DMA and it does not compile on ARM64 so this transformation
is safe.
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Except for dart (which forces IOMMU_DOMAIN_DMA) every driver returns 0 or
IDENTITY from ops->def_domain_type().
The drivers that return IDENTITY have some kind of good reason, typically
that quirky hardware really can't support anything other than IDENTITY.
Arrange things so that if the driver says it needs IDENTITY then
iommu_get_default_domain_type() either fails or returns IDENTITY. It will
not ignore the driver's override to IDENTITY.
Split the function into two steps, reducing the group device list to the
driver's def_domain_type() and the untrusted flag.
Then compute the result based on those two reduced variables. Fully reject
combining untrusted with IDENTITY.
Remove the debugging print on the iommu_group_store_type() failure path,
userspace should not be able to trigger kernel prints.
This makes the next patch cleaner that wants to force IDENTITY always for
ARM_IOMMU because there is no support for DMA.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
What mtk does during mtk_iommu_v1_set_platform_dma() is actually putting
the iommu into identity mode. Make this available as a proper IDENTITY
domain.
The mtk_iommu_v1_def_domain_type() from
commit 8bbe13f52c ("iommu/mediatek-v1: Add def_domain_type") explains
this was needed to allow probe_finalize() to be called, but now the
IDENTITY domain will do the same job so change the returned
def_domain_type.
mkt_v1 is the only driver that returns IOMMU_DOMAIN_UNMANAGED from
def_domain_type(). This allows the next patch to enforce an IDENTITY
domain policy for this driver.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Thierry says this is not used anymore, and doesn't think it makes sense as
an iommu driver. The HW it supports is about 10 years old now and newer HW
uses different IOMMU drivers.
As this is the only driver with a GART approach, and it doesn't really
meet the driver expectations from the IOMMU core, let's just remove it
so we don't have to think about how to make it fit in.
It has a number of identified problems:
- The assignment of iommu_groups doesn't match the HW behavior
- It claims to have an UNMANAGED domain but it is really an IDENTITY
domain with a translation aperture. This is inconsistent with the core
expectation for security sensitive operations
- It doesn't implement a SW page table under struct iommu_domain so
* It can't accept a map until the domain is attached
* It forgets about all maps after the domain is detached
* It doesn't clear the HW of maps once the domain is detached
(made worse by having the wrong groups)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This driver is nonsensical. To not block migrating the core API away from
NULL default_domains give it a hacky of a PLATFORM domain that keeps it
working exactly as it always did.
Leave some comments around to warn away any future people looking at this.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PLATFORM domain will be set as the default domain and attached as
normal during probe. The driver will ignore the initial attach from a NULL
domain to the PLATFORM domain.
After this, the PLATFORM domain's attach_dev will be called whenever we
detach from an UNMANAGED domain (eg for VFIO). This is the same time the
original design would have called op->detach_dev().
This is temporary until the S390 dma-iommu.c conversion is merged.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
POWER is using the set_platform_dma_ops() callback to hook up its private
dma_ops, but this is buired under some indirection and is weirdly
happening for a BLOCKED domain as well.
For better documentation create a PLATFORM domain to manage the dma_ops,
since that is what it is for, and make the BLOCKED domain an alias for
it. BLOCKED is required for VFIO.
Also removes the leaky allocation of the BLOCKED domain by using a global
static.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is used when the iommu driver is taking control of the dma_ops,
currently only on S390 and power spapr. It is designed to preserve the
original ops->detach_dev() semantic that these S390 was built around.
Provide an opaque domain type and a 'default_domain' ops value that allows
the driver to trivially force any single domain as the default domain.
Update iommufd selftest to use this instead of set_platform_dma_ops
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows a driver to set a global static to an IDENTITY domain and
the core code will automatically use it whenever an IDENTITY domain
is requested.
By making it always available it means the IDENTITY can be used in error
handling paths to force the iommu driver into a known state. Devices
implementing global static identity domains should avoid failing their
attach_dev ops.
To make global static domains simpler allow drivers to omit their free
function and update the iommufd selftest.
Convert rockchip to use the new mechanism.
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
overlayfs copies the kiocb flags when it sets up a new kiocb to handle
a write, but it doesn't properly support dealing with the deferred
caller completions of the kiocb. This means it doesn't get the final
write completion value, and hence will complete the write with '0' as
the result.
We could support the caller completions in overlayfs, but for now let's
just disable them in the generated write kiocb.
Reported-by: Zorro Lang <zlang@redhat.com>
Link: https://lore.kernel.org/io-uring/20230924142754.ejwsjen5pvyc32l4@dell-per750-06-vm-08.rhts.eng.pek2.redhat.com/
Fixes: 8c052fb300 ("iomap: support IOCB_DIO_CALLER_COMP")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <71897125-e570-46ce-946a-d4729725e28f@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit a4fdd97622 ("iommu: Use flush queue capability") hid the
IOMMU_DOMAIN_DMA_FQ domain type from domain allocation. A check was
introduced in iommu_dma_init_domain() to fall back if not supported, but
this check runs too late: by that point, devices have been attached to
the IOMMU, and apple-dart's attach_dev() callback does not expect
IOMMU_DOMAIN_DMA_FQ domains.
Change the logic so the IOMMU_DOMAIN_DMA codepath is the default,
instead of explicitly enumerating all types.
Fixes an apple-dart regression in v6.5.
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a4fdd97622 ("iommu: Use flush queue capability")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230922-iommu-type-regression-v2-1-689b2ba9b673@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmUNbgwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjND6PCACVc83E8PykHXnkffJHyBjBLG9l5wAmaA13
kPqcfevXrSUBL7BcqhskydodQ61+23I3zqgQce+6lXzvSIDwfXqZDUghQWpthYNh
5ZWeQy/R8XS90MLLMsLl0b7UzwdlZYZPZKY3VPHQJKP0otHrDVB3prz/CQb7Ccnl
WGGwz2ZgsCatqf599ALFHsE6Xw3GWCODxhrC0FBF7lnyyde/6ElhM/rgrPER4UHz
IsjF9cwlVgQ4MloWjoJb2MtSUGHnMi9fmHktTrriI07ReJYdI0LmwjJtgBv48Uzr
CcLbgOyYsHvsz0hGIJZwXR3+FfrVNuoWBo5/AiZQvAHRVxnftGrZ
=a32m
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.6 -rc
- Fix TLB range command encoding when TTL, Num and Scale are all zero
- Fix soft lockup by limiting TLB invalidation ops issued by SVA
- Fix clocks description for SDM630 platform in arm-smmu DT binding
In mt8192/mt8186, there is only one MM IOMMU that supports 16GB iova
space, which is shared by display, vcodec and camera. These two SoC use
one pgtable and have not the flag SHARE_PGTABLE, we should also keep
share pgtable for this case.
In mtk_iommu_domain_finalise, MM IOMMU always share pgtable, thus remove
the flag SHARE_PGTABLE checking. Infra IOMMU always uses independent
pgtable.
Fixes: cf69ef46db ("iommu/mediatek: Fix two IOMMU share pagetable issue")
Reported-by: Laura Nao <laura.nao@collabora.com>
Closes: https://lore.kernel.org/linux-iommu/20230818154156.314742-1-laura.nao@collabora.com/
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20230819081443.8333-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Zen 4 systems running buggy microcode can hit a WARN_ON() in the PMI
handler, as shown below, several times while perf runs. A simple
`perf top` run is enough to render the system unusable:
WARNING: CPU: 18 PID: 20608 at arch/x86/events/amd/core.c:944 amd_pmu_v2_handle_irq+0x1be/0x2b0
This happens because the Performance Counter Global Status Register
(PerfCntGlobalStatus) has one or more bits set which are considered
reserved according to the "AMD64 Architecture Programmer’s Manual,
Volume 2: System Programming, 24593":
https://www.amd.com/system/files/TechDocs/24593.pdf
To make this less intrusive, warn just once if any reserved bit is set
and prompt the user to update the microcode. Also sanitize the value to
what the code is handling, so that the overflow events continue to be
handled for the number of counters that are known to be sane.
Going forward, the following microcode patch levels are recommended
for Zen 4 processors in order to avoid such issues with reserved bits:
Family=0x19 Model=0x11 Stepping=0x01: Patch=0x0a10113e
Family=0x19 Model=0x11 Stepping=0x02: Patch=0x0a10123e
Family=0x19 Model=0xa0 Stepping=0x01: Patch=0x0aa00116
Family=0x19 Model=0xa0 Stepping=0x02: Patch=0x0aa00212
Commit f2eb058afc57 ("linux-firmware: Update AMD cpu microcode") from
the linux-firmware tree has binaries that meet the minimum required
patch levels.
[ sandipan: - add message to prompt users to update microcode
- rework commit message and call out required microcode levels ]
Fixes: 7685665c39 ("perf/x86/amd/core: Add PerfMonV2 overflow handling")
Reported-by: Jirka Hladky <jhladky@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/3540f985652f41041e54ee82aa53e7dbd55739ae.1694696888.git.sandipan.das@amd.com/
There is no syna,nosleep property in Synaptics RMI4 touchscreen:
ste-hrefprev60-tvk.dtb: synaptics@4b: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20230720115524.137944-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
According to bindings and Linux driver, there is no VDDIO but VIO
supply:
ste-hrefprev60-tvk.dtb: synaptics@4b: Unevaluated properties are not allowed ('vddio-supply' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20230720115524.137944-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Introduce new feature flags for OWE offload that driver can
advertise to indicate kernel/application space to avoid DH IE
handling. When this flag is advertised, the driver/device will
take care of DH IE inclusion and processing of peer DH IE to
generate PMK.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/f891cce4b52c939dfc6b71bb2f73e560e8cad287.1695374530.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Multiple power domains need to be handled explicitly in each driver. The
driver core can not handle it automatically since it is not aware of
power sequencing requirements the hardware might have. This is not a
problem for simpledrm since everything is expected to be powered on by
the bootloader. simpledrm has just ensure it remains powered on during
its lifetime.
This is required on Apple silicon M2 and M2 Pro/Max/Ultra desktop
systems. The HDMI output initialized by the bootloader requires keeping
the display controller and a DP phy power domain on.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912-simpledrm-multiple-power-domains-v2-1-01b66bfb1980@jannau.net
commit 101bd907b4 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
some readers no longer force #CLKREQ to low
when the system need to enter ASPM.
But some platform maybe not implement complete ASPM?
it causes some platforms can not boot
Like in the past only the platform support L1ss we release the #CLKREQ.
Move the judgment (L1ss) to probe,
we think read config space one time when the driver start is enough
Fixes: 101bd907b4 ("misc: rtsx: judge ASPM Mode to set PETXCFG Reg")
Cc: stable <stable@kernel.org>
Reported-by: Paul Grandperrin <paul.grandperrin@gmail.com>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Tested-By: Jade Lovelace <lists@jade.fyi>
Link: https://lore.kernel.org/r/37b1afb997f14946a8784c73d1f9a4f5@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian noted that the rto_push_work IRQ work can be queued for a CPU
that has an empty pushable_tasks list, which means nothing useful will be
done in the IPI other than queue the work for the next CPU on the rto_mask.
rto_push_irq_work_func() only operates on tasks in the pushable_tasks list,
but the conditions for that irq_work to be queued (and for a CPU to be
added to the rto_mask) rely on rq_rt->nr_migratory instead.
nr_migratory is increased whenever an RT task entity is enqueued and it has
nr_cpus_allowed > 1. Unlike the pushable_tasks list, nr_migratory includes a
rt_rq's current task. This means a rt_rq can have a migratible current, N
non-migratible queued tasks, and be flagged as overloaded / have its CPU
set in the rto_mask, despite having an empty pushable_tasks list.
Make an rt_rq's overload logic be driven by {enqueue,dequeue}_pushable_task().
Since rt_rq->{rt_nr_migratory,rt_nr_total} become unused, remove them.
Note that the case where the current task is pushed away to make way for a
migration-disabled task remains unchanged: the migration-disabled task has
to be in the pushable_tasks list in the first place, which means it has
nr_cpus_allowed > 1.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20230811112044.3302588-1-vschneid@redhat.com
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct linereq.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct at24_data.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the
Spansion S29GL512S CFI NOR FLASH on the RSK+RZA1 development board.
The former is mapped directly through the SPI Multi I/O Bus Controller.
The latter resides in the external address space of the Bus State
Controller (BSC).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/17a221699da14639e72264ffa39d47592d470f9a.1693481518.git.geert+renesas@glider.be
Add device nodes for the dual Spansion S25FL512S QSPI NOR FLASH and the
two Spansion S29GL512S CFI NOR FLASHes on the Genmai development board.
The former is mapped directly through the SPI Multi I/O Bus Controller.
The latter reside in the address space of the Bus State Controller
(BSC).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/53c89c70c6b010702fd9ab5247e19986857671ba.1693481518.git.geert+renesas@glider.be
Several board DTS files contain minimal device nodes that represent
on-SoC Local Bus State Controllers (LBSC), although they belong in the
SoC-specific DTS files instead. As these device nodes are incomplete
and unused, and hamper adding proper nodes later, it is better to just
remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/76ece7602045670cbb8dff684c3366ba6eb89add.1693481518.git.geert+renesas@glider.be
Pull up the injection rate control one layer, and let it
control the antenna settings as well. Since mac80211 has
already checked that enough antennas are configured, and
we only have two bits, it's enough to just copy the data
over.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110727.12ab7634dbbc.I5aa16c99864ecd7375011a8996de2564fd01fc30@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the injection and other frame TX rate handling
to always return the injection rate directly, by factoring
the legay rate portion out into a new function called in
the two relevant places (injection and non-injection).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110727.dc920357bad0.I5ee8512fb63f0423c1da35b59fea8811d60c1ad3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the NIC is already dead, as detected by the transport then
there's no point to try to grab the NIC access and time out,
we can just fail fast. This may speed up recovery.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.f3d8498c5a60.I5d0c442a731ca4c00716910d215b4bcde6963a65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new version of wolan_info_notif supports the handling
of bigtk during d3, this patch holds parsing of the new
notif version, adding new keys and updating ipn of
existing keys during the resume flow.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.4ebcd244f436.Ib507573d50fa0ac666d09ab71f5241ccbcd7cd00@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a race with runtime PM getting enabled by userspace:
- we rescan the PCI bus
- this creates the new PCI device including its sysfs
representation
- udev sees the new device, and the (OS-specific?) scripting
enables runtime PM by writing to power/control; this can
happen _before_ the next step - this will runtime-suspend
the device which saves the config space, including the BAR0
that wasn't assigned yet
- the bus rescan assigns resources to the devices and writes
them to the config space of the device
(but not the runtime-pm saved copy)
- the driver binds and this disallows runtime PM, so the device
is resumed, restoring the (incomplete!) config space
- the driver cannot work due to BAR0 not being configured
Fixing the actual race is hard and deep in the PCI layer,
though probably should be done for upstream as well; perhaps
runtime PM should only be allowed after resource assignment,
or some other TBD way.
Work around this in the driver for now by simply (re-)assigning
BAR0 when the driver initializes, if it's unset.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.5f5f782a4e97.I4b7bf5c52ba44a8c7f9878009021689bbfa9c5ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
China 2022 regulations are enabled by default. Disable only when
disabled in BIOS or the firmware don't support this capability. If the
firmware has this capability, read BIOS configuration data in
function 4 using ACPI API and send GRP_REGULATORY_LARI_CONFIG_CHANGE_CMD
to the firmware. Any error while reading BIOS data results in enablement
of china 2022 regulations.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.ba7cb3003e53.If5a180a59ee85ed4a4c9146cfeff841c25b81066@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart, STA link changes happen while the link-sta is
already allocated (had been prior to the restart). Adjust the
allocation and checks to handle that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.99b7cc754b00.Iaa0503a3100250489fed8b4bdcf60e24a96d3392@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart in eSR, links allocated in a station and links
active in the interface may differ. Use for_each_sta_active_link
to capture this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.7ee1f1a55e1c.I410c512d1fad7d1cf9b2d2a3451a312821dc816d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
set_antenna() is supported only when the device is not started in
mac80211 which translates to the firmware not being loaded in iwlwifi.
The tricky part is that iwlwifi populates the sband data during its boot
and doesn't touch this data afterwards, but if the antenna settings
forbid MIMO, we need to update the sband data.
Rework the nvm parsing code to allow to get an existing nvm_data and
modify the sband with additional constraints (tx / rx chains masks).
Suggested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.81d94d630c95.I9473da818cbeeb51b2f89dcc59b00019113e7f55@changeid
[add bugfix from Benjamin for iwl_mvm_get_valid_rx_ant()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>