Commit graph

1,233,452 commits

Author SHA1 Message Date
Jens Axboe
2e521a2064 exit: add internal include file with helpers
Move struct wait_opts and waitid_info into kernel/exit.h, and include
function declarations for the recently added helpers. Make them
non-static as well.

This is in preparation for adding a waitid operation through io_uring.
With the abtracted helpers, this is now possible.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:03:50 -06:00
Jens Axboe
eda7e9d409 exit: add kernel_waitid_prepare() helper
Move the setup logic out of kernel_waitid(), and into a separate helper.

No functional changes intended in this patch.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:03:44 -06:00
Jens Axboe
06a101ca45 exit: move core of do_wait() into helper
Rather than have a maze of gotos, put the actual logic in __do_wait()
and have do_wait() loop deal with waitqueue setup/teardown and whether
to call __do_wait() again.

No functional changes intended in this patch.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:03:38 -06:00
Jens Axboe
9d900d4ea3 exit: abstract out should_wake helper for child_wait_callback()
Abstract out the helper that decides if we should wake up following
a wake_up() callback on our internal waitqueue.

No functional changes intended in this patch.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:03:33 -06:00
Jens Axboe
fc68fcda04 io_uring/rw: add support for IORING_OP_READ_MULTISHOT
This behaves like IORING_OP_READ, except:

1) It only supports pollable files (eg pipes, sockets, etc). Note that
   for sockets, you probably want to use recv/recvmsg with multishot
   instead.

2) It supports multishot mode, meaning it will repeatedly trigger a
   read and fill a buffer when data is available. This allows similar
   use to recv/recvmsg but on non-sockets, where a single request will
   repeatedly post a CQE whenever data is read from it.

3) Because of #2, it must be used with provided buffers. This is
   uniformly true across any request type that supports multishot and
   transfers data, with the reason being that it's obviously not
   possible to pass in a single buffer for the data, as multiple reads
   may very well trigger before an application has a chance to process
   previous CQEs and the data passed from them.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:02:30 -06:00
Jens Axboe
d2d778fbf9 io_uring/rw: mark readv/writev as vectored in the opcode definition
This is cleaner than gating on the opcode type, particularly as more
read/write type opcodes may be added.

Then we can use that for the data import, and for __io_read() on
whether or not we need to copy state.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:00:46 -06:00
Jens Axboe
a08d195b58 io_uring/rw: split io_read() into a helper
Add __io_read() which does the grunt of the work, leaving the completion
side to the new io_read(). No functional changes in this patch.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-21 12:00:41 -06:00
Douglas Anderson
918ce0906d drm/hisilicon/kirin: Call drm_atomic_helper_shutdown() at shutdown/unbind time
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

I have attempted to put this in the right place at unbind time. In
most other DRM drivers the call is made right after the call to
drm_kms_helper_poll_fini(), so I've put it there. That means that this
call will also be made in the case that we hit errors in bind, since
kirin_drm_kms_cleanup() is called both in the bind error path and in
unbind. I believe this is harmless even though it's not needed in the
bind error path.

For handling shutdown, we rely on the common technique of seeing if
the drvdata is NULL to know whether we need to call
drm_atomic_helper_shutdown(). This makes it important to make sure
that the drvdata is NULL if bind failed or if unbind was called. We
don't need the actual check for NULL and we'll rely on the patch
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.6.I21e0916bbd276033f7d31979c0da171458dedd4d@changeid
2023-09-21 10:54:20 -07:00
Douglas Anderson
3c4babae3c drm: Call drm_atomic_helper_shutdown() at shutdown/remove time for misc drivers
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver remove (or unbind) time. Among other things, this means
that if a panel is in use that it won't be cleanly powered off at
system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.

A few notes about these fixes:
- I confirmed that these drivers were all DRIVER_MODESET type drivers,
  which I believe makes this relevant.
- I confirmed that these drivers were all DRIVER_ATOMIC.
- When adding drm_atomic_helper_shutdown() to the remove/unbind path,
  I added it after drm_kms_helper_poll_fini() when the driver had
  it. This seemed to be what other drivers did. If
  drm_kms_helper_poll_fini() wasn't there I added it straight after
  drm_dev_unregister().
- This patch deals with drivers using the component model in similar
  ways as the patch ("drm: Call drm_atomic_helper_shutdown() at
  shutdown time for misc drivers")
- These fixes rely on the patch ("drm/atomic-helper:
  drm_atomic_helper_shutdown(NULL) should be a noop") to simplify
  shutdown.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # tilcdc
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.5.I771eb4bd03d8772b19e7dcfaef3e2c167bce5846@changeid
2023-09-21 10:51:55 -07:00
Douglas Anderson
10c8204c8b drm/ssd130x: Call drm_atomic_helper_shutdown() at remove time
Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at remove time. Let's
add it.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS driver remove comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.4.I4752a39ad9f8fd08b32c2b78a8a3e40491bfb5eb@changeid
2023-09-21 10:50:03 -07:00
Douglas Anderson
013d382d11 drm/vc4: Call drm_atomic_helper_shutdown() at shutdown time
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.3.I10dbe099fb1059d304ba847d19fc45054f7ffe9f@changeid
2023-09-21 10:49:04 -07:00
Douglas Anderson
ce3d99c834 drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers
Based on grepping through the source code these drivers appear to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

All of the drivers in this patch were fairly straightforward to fix
since they already had a call to drm_atomic_helper_shutdown() at
remove/unbind time but were just lacking one at system shutdown. The
only hitch is that some of these drivers use the component model to
register/unregister their DRM devices. The shutdown callback is part
of the original device. The typical solution here, based on how other
DRM drivers do this, is to keep track of whether the device is bound
based on drvdata. In most cases the drvdata is the drm_device, so we
can just make sure it is NULL when the device is not bound. In some
drivers, this required minor code changes. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
2023-09-21 10:41:04 -07:00
Douglas Anderson
c478768ce8 drm/armada: Call drm_atomic_helper_shutdown() at shutdown time
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.

The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.

This driver was fairly easy to update. The drm_device is stored in the
drvdata so we just have to make sure the drvdata is NULL whenever the
device is not bound. To make things simpler,
drm_atomic_helper_shutdown() has been modified to consider a NULL
drm_device as a noop in the patch ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop").

Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.1.I3d5598bd73a59b5ded71430736c93f67dc5dea61@changeid
2023-09-21 10:38:11 -07:00
peterz@infradead.org
0f4b5f9722 futex: Add sys_futex_requeue()
Finish off the 'simple' futex2 syscall group by adding
sys_futex_requeue(). Unlike sys_futex_{wait,wake}() its arguments are
too numerous to fit into a regular syscall. As such, use struct
futex_waitv to pass the 'source' and 'destination' futexes to the
syscall.

This syscall implements what was previously known as FUTEX_CMP_REQUEUE
and uses {val, uaddr, flags} for source and {uaddr, flags} for
destination.

This design explicitly allows requeueing between different types of
futex by having a different flags word per uaddr.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.511860556@noisy.programming.kicks-ass.net
2023-09-21 19:22:10 +02:00
peterz@infradead.org
27b88f3519 futex: Add flags2 argument to futex_requeue()
In order to support mixed size requeue, add a second flags argument to
the internal futex_requeue() function.

No functional change intended.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.396780136@noisy.programming.kicks-ass.net
2023-09-21 19:22:09 +02:00
peterz@infradead.org
3b63a55f49 futex: Propagate flags into get_futex_key()
Instead of only passing FLAGS_SHARED as a boolean, pass down flags as
a whole.

No functional change intended.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.282857501@noisy.programming.kicks-ass.net
2023-09-21 19:22:09 +02:00
peterz@infradead.org
cb8c4312af futex: Add sys_futex_wait()
To complement sys_futex_waitv()/wake(), add sys_futex_wait(). This
syscall implements what was previously known as FUTEX_WAIT_BITSET
except it uses 'unsigned long' for the value and bitmask arguments,
takes timespec and clockid_t arguments for the absolute timeout and
uses FUTEX2 flags.

The 'unsigned long' allows FUTEX2_SIZE_U64 on 64bit platforms.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.164324363@noisy.programming.kicks-ass.net
2023-09-21 19:22:08 +02:00
peterz@infradead.org
43adf84495 futex: FLAGS_STRICT
The current semantics for futex_wake() are a bit loose, specifically
asking for 0 futexes to be woken actually gets you 1.

Adding a !nr check to sys_futex_wake() makes that it would return 0
for unaligned futex words, because that check comes in the shared
futex_wake() function. Adding the !nr check there, would affect the
legacy sys_futex() semantics.

Hence frob a flag :-(

Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.048643656@noisy.programming.kicks-ass.net
2023-09-21 19:22:07 +02:00
peterz@infradead.org
9f6c532f59 futex: Add sys_futex_wake()
To complement sys_futex_waitv() add sys_futex_wake(). This syscall
implements what was previously known as FUTEX_WAKE_BITSET except it
uses 'unsigned long' for the bitmask and takes FUTEX2 flags.

The 'unsigned long' allows FUTEX2_SIZE_U64 on 64bit platforms.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105247.936205525@noisy.programming.kicks-ass.net
2023-09-21 19:22:07 +02:00
peterz@infradead.org
698eb82638 futex: Validate futex value against futex size
Ensure the futex value fits in the given futex size. Since this adds a
constraint to an existing syscall, it might possibly change behaviour.

Currently the value would be truncated to a u32 and any high bits
would get silently lost.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105247.828934099@noisy.programming.kicks-ass.net
2023-09-21 19:22:06 +02:00
peterz@infradead.org
5694289ce1 futex: Flag conversion
Futex has 3 sets of flags:

 - legacy futex op bits
 - futex2 flags
 - internal flags

Add a few helpers to convert from the API flags into the internal
flags.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.722140574@noisy.programming.kicks-ass.net
2023-09-21 19:22:05 +02:00
peterz@infradead.org
d6d08d2479 futex: Extend the FUTEX2 flags
Add the definition for the missing but always intended extra sizes,
and add a NUMA flag for the planned numa extention.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.617057368@noisy.programming.kicks-ass.net
2023-09-21 19:22:05 +02:00
peterz@infradead.org
4923954bbc futex: Clarify FUTEX2 flags
sys_futex_waitv() is part of the futex2 series (the first and only so
far) of syscalls and has a flags field per futex (as opposed to flags
being encoded in the futex op).

This new flags field has a new namespace, which unfortunately isn't
super explicit. Notably it currently takes FUTEX_32 and
FUTEX_PRIVATE_FLAG.

Introduce the FUTEX2 namespace to clarify this

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net
2023-09-21 19:22:04 +02:00
Linus Torvalds
b5cbe7c00a v6.6-rc3.vfs.ctime.revert
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZQsZLQAKCRCRxhvAZXjc
 op0vAP96hkSUnmXmxTr8GHId3yfElN8ZZ3aSfePeBdljjKEZVAEA2+cbHLy4GqRi
 TpjP1HNIdmtbVSC2ZnrgqkbwGageQgg=
 =s92y
 -----END PGP SIGNATURE-----

Merge tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull finegrained timestamp reverts from Christian Brauner:
 "Earlier this week we sent a few minor fixes for the multi-grained
  timestamp work in [1]. While we were polishing those up after Linus
  realized that there might be a nicer way to fix them we received a
  regression report in [2] that fine grained timestamps break gnulib
  tests and thus possibly other tools.

  The kernel will elide fine-grain timestamp updates when no one is
  actively querying for them to avoid performance impacts. So a sequence
  like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may
  result in timestamp f1 to be older than the final f2 timestamp even
  though f1 was last written too but the second write didn't update the
  timestamp.

  Such plotholes can lead to subtle bugs when programs compare
  timestamps. For example, the nap() function in [2] will estimate that
  it needs to wait one ns on a fine-grain timestamp enabled filesytem
  between subsequent calls to observe a timestamp change. But in general
  we don't update timestamps with more than one jiffie if we think that
  no one is actively querying for fine-grain timestamps to avoid
  performance impacts.

  While discussing various fixes the decision was to go back to the
  drawing board and ultimately to explore a solution that involves only
  exposing such fine-grained timestamps to nfs internally and never to
  userspace.

  As there are multiple solutions discussed the honest thing to do here
  is not to fix this up or disable it but to cleanly revert. The general
  infrastructure will probably come back but there is no reason to keep
  this code in mainline.

  The general changes to timestamp handling are valid and a good cleanup
  that will stay. The revert is fully bisectable"

Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1]
Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2]

* tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  Revert "fs: add infrastructure for multigrain timestamps"
  Revert "btrfs: convert to multigrain timestamps"
  Revert "ext4: switch to multigrain timestamps"
  Revert "xfs: switch to multigrain timestamps"
  Revert "tmpfs: add support for multigrain timestamps"
2023-09-21 10:15:26 -07:00
Josef Bacik
b4c639f699 btrfs: initialize start_slot in btrfs_log_prealloc_extents
Jens reported a compiler warning when using
CONFIG_CC_OPTIMIZE_FOR_SIZE=y that looks like this

  fs/btrfs/tree-log.c: In function ‘btrfs_log_prealloc_extents’:
  fs/btrfs/tree-log.c:4828:23: warning: ‘start_slot’ may be used
  uninitialized [-Wmaybe-uninitialized]
   4828 |                 ret = copy_items(trans, inode, dst_path, path,
	|                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   4829 |                                  start_slot, ins_nr, 1, 0);
	|                                  ~~~~~~~~~~~~~~~~~~~~~~~~~
  fs/btrfs/tree-log.c:4725:13: note: ‘start_slot’ was declared here
   4725 |         int start_slot;
	|             ^~~~~~~~~~

The compiler is incorrect, as we only use this code when ins_len > 0,
and when ins_len > 0 we have start_slot properly initialized.  However
we generally find the -Wmaybe-uninitialized warnings valuable, so
initialize start_slot to get rid of the warning.

Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-21 18:52:23 +02:00
Josef Bacik
20218dfbaa btrfs: make sure to initialize start and len in find_free_dev_extent
Jens reported a compiler error when using CONFIG_CC_OPTIMIZE_FOR_SIZE=y
that looks like this

  In function ‘gather_device_info’,
      inlined from ‘btrfs_create_chunk’ at fs/btrfs/volumes.c:5507:8:
  fs/btrfs/volumes.c:5245:48: warning: ‘dev_offset’ may be used uninitialized [-Wmaybe-uninitialized]
   5245 |                 devices_info[ndevs].dev_offset = dev_offset;
	|                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
  fs/btrfs/volumes.c: In function ‘btrfs_create_chunk’:
  fs/btrfs/volumes.c:5196:13: note: ‘dev_offset’ was declared here
   5196 |         u64 dev_offset;

This occurs because find_free_dev_extent is responsible for setting
dev_offset, however if we get an -ENOMEM at the top of the function
we'll return without setting the value.

This isn't actually a problem because we will see the -ENOMEM in
gather_device_info() and return and not use the uninitialized value,
however we also just don't want the compiler warning so rework the code
slightly in find_free_dev_extent() to make sure it's always setting
*start and *len to avoid the compiler warning.

Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-21 18:52:20 +02:00
Mark Brown
00a6d389b8
ASoC: Add rtq9128 audio amplifier
Merge series from cy_huang@richtek.com:

This patch series adds Richtek rtq9128 automotive audio amplifier
support. It can deliver up to 4x75W into 4Ohm speaker from a 25V
supply in automotive applications.
2023-09-21 17:45:30 +01:00
Andy Shevchenko
6cb9c8637c platform/x86: think-lmi: Use strreplace() to replace a character by nul
We can replace
	p = strchrnul(str, '$OLD');
	*p = '\0';
with
	strreplace(str, '$OLD', '\0');
that does the compatible modification without a need of the temporary variable.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Andy Shevchenko
e621198016 platform/x86: think-lmi: Replace kstrdup() + strreplace() with kstrdup_and_replace()
Replace open coded functionalify of kstrdup_and_replace() with a call.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
d5e2c23366 platform/surface: hotplug: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-8-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
52f8a4b63b platform/surface: gpe: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-7-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
0c845611a2 platform/surface: dtx: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-6-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
09416e0f88 platform/surface: aggregator-registry: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-5-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
1cc995a6e4 platform/surface: aggregator-cdev: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
342d7dce2f platform/surface: acpi-notify: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:19 +02:00
Uwe Kleine-König
8d53109dd6 platform/surface: surface3-wmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:31:18 +02:00
Hans de Goede
45ae16ec3a platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
gpio_crystalcove pin 10 is already in input mode and passing GPIOD_IN
when requesting the GPIO changes its pull-up/-down settings causing
the 830F/L to get misdetected as 1050F/L.

Switch to using GPIOD_ASIS when requesting the GPIO to fix
the misdetection.

Fixes: 4014ae236b ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230915214933.62595-1-hdegoede@redhat.com
2023-09-21 18:31:18 +02:00
Mark Pearson
318d97849f platform/x86: think-lmi: Add bulk save feature
On Lenovo platforms there is a limitation in the number of times an
attribute can be saved. This is an architectural limitation and it limits
the number of attributes that can be modified to 48.
A solution for this is instead of the attribute being saved after every
modification allow a user to bulk set the attributes and then trigger a
final save. This allows unlimited attributes.

This patch introduces a save_settings attribute that can be configured to
either single or bulk mode by the user.
Single mode is the default but customers who want to avoid the 48
attribute limit can enable bulk mode.

Displaying the save_settings attribute will display the enabled mode.

When in bulk mode writing 'save' to the save_settings attribute will
trigger a save. Once this has been done a reboot is required before more
attributes can be modified.

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230919141530.4805-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:29:29 +02:00
Ilpo Järvinen
bc3b6f5946 MAINTAINERS: Add x86 platform drivers patchwork
Add x86 platform drivers patchwork which has been missing from
MAINTAINERS.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230919123948.1583-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-21 18:03:03 +02:00
Linus Torvalds
7bdfc1af0a powerpc fixes for 6.6 #2
- A fix for breakpoint handling which was using get_user() while atomic.
 
  - Fix the Power10 HASHCHK handler which was using get_user() while atomic.
 
  - A few build fixes for issues caused by recent changes.
 
 Thanks to: Benjamin Gray, Christophe Leroy, Kajol Jain, Naveen N Rao.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmUMCwITHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEfZEAC2WoEBUwJfJtNEeKczK+mBZGIu6Ih2
 pLV6rcT2GCZdrE/kFHV6ozxTEJN/oTmyuahJzqv2dmQzmw7HiHHDhjUeghhlZSqu
 1xvn+Fy6Ws08+pNi4KFP2Oo8eFMQ6fcCRGEfKQLVb8ajwSM+bvgkH7N2W73zFpJx
 fasLRqK9oSoAXyBmw8NEhTxtPpap/KBZ0HxqeGzuzRPkUy/AHTpzZnKsG+lrrf4z
 5WmhM6bceyCzDEb5Tx9zFMrsQDdZgXw/H3vNcvh9A4SaYSFjUPvj9FyUmrRzXexh
 Wmv0esV3vClDpvWia3npwvfnvyf8inZ96+0XnargETKgjnhCU9ZOjUY2sGZ9xehv
 iG5J8I6l5bu+LNKzMwAx61VTgu6V2BVcs9aFSr6qO64w3PbvmoyK9/Ob+OoLVMM/
 fMs28CPUVEj0+BkclcRBIz3m6ZvIQnuGRuOQE2Uy5Wz15UZW6e9517PNdDQK2zOw
 oDOn0XaVL02UMT1EkuptRIJC+u4F3zG6VqOScRqG2Xq+xPrqillYF0jDIqn5+JpG
 99QLZfWBshFnWbcz9+8xRs5kUIkx5oZDAaBOPWhX/FlqJulo7Yrsl4jQB1hUaGoA
 jVRaS+j2XGKuectTFAluceF9cNiuBS7jELdViX71lFwF25cPjxrgrKjihOrq/y2H
 xqITQ82Qa1xT6Q==
 =piWL
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - A fix for breakpoint handling which was using get_user() while atomic

 - Fix the Power10 HASHCHK handler which was using get_user() while
   atomic

 - A few build fixes for issues caused by recent changes

Thanks to Benjamin Gray, Christophe Leroy, Kajol Jain, and Naveen N Rao.

* tag 'powerpc-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/dexcr: Move HASHCHK trap handler
  powerpc/82xx: Select FSL_SOC
  powerpc: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION and FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
  powerpc/watchpoints: Annotate atomic context in more places
  powerpc/watchpoint: Disable pagefaults when getting user instruction
  powerpc/watchpoints: Disable preemption in thread_change_pc()
  powerpc/perf/hv-24x7: Update domain value check
2023-09-21 08:39:24 -07:00
Sudeep Holla
af78e5c309 firmware: arm_scmi: Move power-domain driver to the pmdomain dir
To simplify with maintenance let's move the Arm SCMI power-domain driver
to the new pmdomain directory.

Link: https://lore.kernel.org/all/20230921113328.3208651-1-sudeep.holla@arm.com
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:35:14 +01:00
Ulf Hansson
2af23ceb86 pmdomain: arm: Add the SCMI performance domain
To enable support for performance scaling (DVFS) for generic devices with
the SCMI performance protocol, let's add an SCMI performance domain. This
is being modelled as a genpd provider, with support for performance scaling
through genpd's ->set_performance_state() callback.

Note that, this adds the initial support that allows consumer drivers for
attached devices, to vote for a new performance state via calling the
dev_pm_genpd_set_performance_state(). However, this should be avoided as
it's in most cases preferred to use the OPP library to vote for a new OPP
instead. The support using the OPP library isn't part of this change, but
needs to be implemented from subsequent changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230919121605.7304-1-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:35:14 +01:00
Ulf Hansson
3dd91515ef PM: domains: Allow genpd providers to manage OPP tables directly by its FW
In some cases the OPP tables aren't specified in device tree, but rather
encoded in the FW. To allow a genpd provider to specify them dynamically
instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:35:14 +01:00
Ulf Hansson
92b2028b00 cpufreq: scmi: Add support to parse domain-id using #power-domain-cells
The performance domain-id can be described in DT using the power-domains
property or the clock property. The latter is already supported, so let's
add support for the power-domains too.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-12-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:35:14 +01:00
Linus Torvalds
88a174a906 xen: branch for v6.6-rc3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZQv/2QAKCRCAXGG7T9hj
 vlaAAQCsmQ0V9N9I4SW3G2JKGGIWW6+/IzsKF4RhNlSgm15MNgD9E0nHfEQpRGkL
 6qKO7wc/C3PJRrcq8RxWS8jergeT+wY=
 =vBS0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

 - remove some unused functions in the Xen event channel handling

 - fix a regression (introduced during the merge window) when booting as
   Xen PV guest

 - small cleanup removing another strncpy() instance

* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/efi: refactor deprecated strncpy
  x86/xen: allow nesting of same lazy mode
  x86/xen: move paravirt lazy code
  arm/xen: remove lazy mode related definitions
  xen: simplify evtchn_do_upcall() call maze
2023-09-21 08:27:42 -07:00
Ulf Hansson
0ead1f3e15 dt-bindings: power: Clarify performance capabilities of power-domains
The power-domains bindings has in many years been used to describe so
called performance-domains too. Rather than using a separate binding it has
been convenient to re-use the power-domain bindings, as in some cases it's
in fact a combination of the both that would be the best description.

Therefore, let's make it more clear that the power-domains bindings can be
used to describe a performance-domain too.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-11-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:25:10 +01:00
Ulf Hansson
e11c480b6d dt-bindings: firmware: arm,scmi: Extend bindings for protocol@13
The protocol@13 node is describing the performance scaling option for the
ARM SCMI interface, as a clock provider. This is unnecessary limiting, as
performance scaling is in many cases not limited to switching a clock's
frequency.

Therefore, let's extend the binding so the interface can be modelled as a
generic performance domain too. The common way to describe this, is to use
the power-domain DT bindings, so let's use that.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-10-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:25:10 +01:00
Ulf Hansson
6e429adc60 dt-bindings: arm: cpus: Add a power-domain-name for a performance-domain
When an CPU's performance domain is managed through the SCMI firmware,
let's enable us describe this as a consumer of a power-domain provider,
which is the de-facto standard to use for performance domains. In this
case, let's specify a corresponding power-domain-name, to point out the
corresponding index for it.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230825112633.236607-9-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:25:10 +01:00
Ulf Hansson
4f1f0bc8ed cpufreq: scmi: Avoid one OF parsing in scmi_get_sharing_cpus()
The domain-id for the cpu_dev has already been parsed at the point when
scmi_get_sharing_cpus() is getting called. Let's pass it as an in-parameter
to avoid the unnecessary OF parsing.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-7-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:24:27 +01:00
Ulf Hansson
9b578d8362 firmware: arm_scmi: Drop redundant ->device_domain_id() from perf ops
There are no longer any users of the ->device_domain_id() ops in the
scmi_perf_proto_ops, therefore let's remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-6-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-09-21 16:24:27 +01:00