Driver will receive exception IPC message and process it by
snd_sof_dsp_panic.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get the FW panic information from telemetry data in memory window and
dump it to kernel log. The old platforms before CAVS 2.5+ don't support
it since there is no support in FW for them.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump dsp stack with sof_ipc4_intel_dump_telemetry_state since dsp stack
information is included by telemetry data. This also supports lnl since
the mtl code is reused.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Telemetry data is decoded based on intel xtensa design and printed in
kernel log by sof debug framework.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The exception node is created when FW is ready and clear to
zero when FW post boot.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core dump includes hardware platform information, cpu registers and
exception call stack. FW saves core dump to telemetry slot in shared
memory window for host in the event of FW exception. This patch creates
exception node in debugfs for user to dump telemetry data.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently IPC4 supports GDB slot, telemetry slot and
debug slot. This helper function will be used to get
the slot offset in debug windows for further processing.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The macro definitions of debug slot can be used by gdb, telemetry
and mtrace log, so move these definitions to header.h from mtrace.
Then these macro definitions can be shared
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Xtensa platform ar0 is for caller address and ar1 is for stack
address. The ar register dump can be used to rebuild call stack with
FW elf file by debug tools.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Cirrus Logic CS42L43 using SoundWire.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919020011.1896041-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_simple_probe() is used for both "DT probe" (A) and "platform probe"
(B). It uses "goto err" when error case, but it is not needed for
"platform probe" case (B). Thus it is using "return" directly there.
static int asoc_simple_probe(...)
{
^ if (...) {
| ...
(A) if (ret < 0)
| goto err;
v } else {
^ ...
| if (ret < 0)
(B) return -Exxx;
v }
...
^ if (ret < 0)
(C) goto err;
v ...
err:
(D) simple_util_clean_reference(card);
return ret;
}
Both case are using (C) part, and it calls (D) when err case.
But (D) will do nothing for (B) case.
Because of these behavior, current code itself is not wrong,
but is confusable, and more, static analyzing tool will warning on
(B) part (should use goto err).
To avoid static analyzing tool warning, this patch uses "goto err"
on (B) part.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7hy7mlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rule for the SoundWire tables is that the platforms with more
devices need to be added first. We broke that rule with the Dell SKU
0B34, and caused the second amplifier for SKU 0AF3 to be ignored.
The fix is simple, we need to move the single-amplifier entry after
the two-amplifier one.
Fixes: b62a1a839b ("ASoC: Intel: soc-acpi: add tables for Dell SKU 0B34")
Closes: https://github.com/thesofproject/linux/issues/4559
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919083606.1920202-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in MTL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for ES83x6 codec in MTL match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use RUNTIME_PM_OPS() instead of the old SET_RUNTIME_PM_OPS().
This means we don't need __maybe_unused on the functions.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919081153.19793-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add PWM device and the corresponding clock gating device in adma subsystem.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If mbox_request_channel_byname() fails, the memory allocated a few lines
above still need to be freed before going to the error handling path.
Fixes: 046326989a ("firmware: imx: Save channel name for further use")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
power_supply_uevent() which is called to emit a udev event on device
deletion attempts to use the power_supply_battery_info structure,
which is device-managed and has been freed before this point.
Fix this by not generating all battery/charger properties when the
device is about to be removed. This also avoids generating errors
when trying to access the hardware in hot-unplug scenarios.
==================================================================
BUG: KASAN: slab-use-after-free in power_supply_battery_info_has_prop (power_supply_core.c:872)
Read of size 4 at addr 0000000062e59028 by task python3/27
Call Trace:
power_supply_battery_info_has_prop (power_supply_core.c:872)
power_supply_uevent (power_supply_sysfs.c:504)
dev_uevent (drivers/base/core.c:2590)
kobject_uevent_env (lib/kobject_uevent.c:558)
kobject_uevent (lib/kobject_uevent.c:643)
device_del (drivers/base/core.c:3266 drivers/base/core.c:3831)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
Allocated by task 27:
devm_kmalloc (drivers/base/devres.c:119 drivers/base/devres.c:829)
power_supply_get_battery_info (include/linux/device.h:316 power_supply_core.c:626)
__power_supply_register (power_supply_core.c:1408)
devm_power_supply_register (power_supply_core.c:1544)
bq256xx_probe (bq256xx_charger.c:1539 bq256xx_charger.c:1727) bq256xx_charger
i2c_device_probe (drivers/i2c/i2c-core-base.c:584)
really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658)
__driver_probe_device (drivers/base/dd.c:800)
device_driver_attach (drivers/base/dd.c:1128)
bind_store (drivers/base/bus.c:273)
...
Freed by task 27:
kfree (mm/slab_common.c:1073)
release_nodes (drivers/base/devres.c:503)
devres_release_all (drivers/base/devres.c:536)
device_del (drivers/base/core.c:3829)
device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854)
power_supply_unregister (power_supply_core.c:1608)
devm_power_supply_release (power_supply_core.c:1515)
release_nodes (drivers/base/devres.c:506)
devres_release_group (drivers/base/devres.c:669)
i2c_device_remove (drivers/i2c/i2c-core-base.c:629)
device_remove (drivers/base/dd.c:570)
device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295)
device_driver_detach (drivers/base/dd.c:1332)
unbind_store (drivers/base/bus.c:247)
...
==================================================================
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Fixes: 27a2195efa ("power: supply: core: auto-exposure of simple-battery data")
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use control register bit defines instead of plain numbers where
possible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of having only masks for specific bit locations within control
registers, also define the bit numbers and use them to define the
masks.
The bit defines can be used to convert plain numbers to defines.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use existing CR0 defines to define CR0_IRQ_SUBCLASS_MASK instead of
open-coding the defines again.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a couple of missing control register defines which otherwise would
prevent to convert other open-coded usages.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use system_ctl_load() instead of local_ctl_load() to reflect that
control register changes are supposed to be global.
Even though setup_cr() was ok, note that the usage of local_ctl_load()
would have been wrong, if it would have happened after the control
register save area was initialized: only local control register contents
would have been changed, but wouldn't be used for new CPUs.
With using system_ctl_load() the caller doesn't need to take care.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add system_ctl_load() which can be used to load a value to a control
register system wide.
Refactor system_ctl_set_clear_bit() so it can handle all different
request types, and also rename it to system_ctlreg_modify()
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use system_ctl_set_bit() instead of local_ctl_set_bit() to reflect
that the control register changes are supposed to be global. This
change is just for documentation purposes, since it still results only
in local control register contents being changed.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Allow to call system_ctl_set_bit() and system_clt_clear_bit() early, so
that users do not have to take care when the control register save area
has been initialized. Users are supposed to use system_ctl_set_bit() and
system:clt_clear_bit() for all control register changes which are supposed
to be seen globally.
Depending on the system state such calls will change:
- local control register contents
- save area and local control register contents
- save area and global control register contents
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit e1b9c2749a ("s390/smp: ensure global control register contents
are in sync") made the control register save area contained within the
lowcore at absolute address zero a resource which is used when
initializing CPUs. However this is anything but obvious from the code.
Add an ctlreg_init_save_area() function in order to make this explicit.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add type checking to __local_ctl_load() and __local_ctl_store(). For
both functions enforce to pass an array consisting of unsigned longs.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Open code struct per_regs within kprobes and ptrace code, since at both
locations a struct per_regs is passed to __local_ctl_load() and
__local_ctl_store() which prevents to implement type checking for both
functions.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change __local_ctl_load() and __local_ctl_store(), so that control
register parameters come first.
This way all control handling functions consistently have control
register(s) parameter first.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert all single control register usages of __local_ctl_load() and
__local_ctl_store() to local_ctl_load() and local_ctl_store().
This also requires to change the type of some struct lowcore members
from __u64 to unsigned long.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add local_ctl_load() and local_ctl_store() which load and store contents
for only a single control register.
This allows for easier to read code, but also better type checking,
since __local_ctl_load() and __local_ctl_store() do not come with any
type checking at all (which will be changed with subsequent patches).
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add local and system prefix to some functions to clarify they change
control register contents on either the local CPU or the on all CPUs.
This results in the following API:
Two defines which load and save multiple control registers.
The defines correlate with the following C prototypes:
void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high);
void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high);
Two functions which locally set or clear one bit for a specified
control register:
void local_ctl_set_bit(unsigned int cr, unsigned int bit);
void local_ctl_clear_bit(unsigned int cr, unsigned int bit);
Two functions which set or clear one bit for a specified control
register on all CPUs:
void system_ctl_set_bit(unsigned int cr, unsigned int bit);
void system_ctl_clear_bit(unsigend int cr, unsigned int bit);
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use symbolic names for operands, remove typedefs, and slightly
refactor the code.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rename ctl_reg.h to ctlreg.h so it matches not only ctlreg.c but also
other control register related function, union, and structure names,
which all come with a ctlreg prefix.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Control register handling has nothing to do with low level SMP code.
Move it to a separate file.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use strlcat() instead of strcat() in order to get rid of this W=1
warning:
In function ‘strlcat’,
inlined from ‘strcat’ at ./include/linux/fortify-string.h:432:6,
inlined from ‘setup_zfcpdump’ at arch/s390/kernel/setup.c:308:2,
inlined from ‘setup_arch’ at arch/s390/kernel/setup.c:1002:2:
./include/linux/fortify-string.h:406:19: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
406 | p[actual] = '\0';
| ~~~~~~~~~~^~~~~~
As stated in fortify-string.h strcat() should not be used, since
FORTIFY_SOURCE cannot figure out the size of the destination buffer.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that CPU 0 is not hotpluggable, it is not necessary to support
freeing its stacks. Delete all the code that migrates it to new stacks
and a new lowcore.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On s390, CPU 0 has special properties in comparison to other CPUs, as it
cannot be deconfigured for example. Therefore, allowing to hotplug CPU 0
introduces additional complexity when handling these properties.
Disallowing to hotplug CPU 0 allows to remove such complexities.
This follows x86 which also prevents offlining of CPU0 since commit
e59e74dc48 ("x86/topology: Remove CPU0 hotplug option").
[hca@linux.ibm.com: changed commit message]
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Both the external call as well as the emergency signal submask bits in
control register 0 are set before any interrupt handler is registered.
Change the order and first register the interrupt handler and only then
enable the interrupts by setting the corresponding bits in control
register 0.
This prevents that the second part of the machine check handler for
early machine check handling is not executed: the machine check handler
sends an IPI to the CPU it runs on. If the corresponding interrupts are
enabled, but no interrupt handler is present, the interrupt is ignored.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add additional operation mode strings into the EP11 operation mode table.
These strings are returned by sysfs entries /sys/devices/ap/cardxx/op_modes
and /sys/devices/ap/cardxx/xx.yyyy/op_modes.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Building cert_store.o with W=1 reveals this bug:
CC arch/s390/kernel/cert_store.o
arch/s390/kernel/cert_store.c:443:45: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
443 | sprintf(desc + name_len, ":%04u:%08u", vce->vce_hdr.vc_index, cs_token);
| ^
arch/s390/kernel/cert_store.c:443:9: note: ‘sprintf’ output between 15 and 18 bytes into a destination of size 15
443 | sprintf(desc + name_len, ":%04u:%08u", vce->vce_hdr.vc_index, cs_token);
Fix this by using the correct maximum width for each integer component
in both buffer length calculation and format string. Also switch to
using snprintf() to guard against potential future changes to the
integer range of each component.
Fixes: 8cf57d7217 ("s390: add support for user-defined certificates")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>