In case of hostile takeovers it must be ensured that the previous
owner cannot scribble over the output buffer of the emergency/panic
context. This is achieved by:
- Adding a global output buffer instance for the panic context.
This is the only situation where hostile takeovers can occur and
there is always at most 1 panic context.
- Allocating an output buffer per non-boot console upon console
registration. This buffer is used by the console owner when not
in panic context. (For boot consoles, the existing shared global
legacy output buffer is used instead. Boot console printing will
be synchronized with legacy console printing.)
- Choosing the appropriate buffer is handled in the acquire/release
functions.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-5-john.ogness@linutronix.de
The nbcon boot consoles also need printk buffers that are available
very early. Since the nbcon boot consoles will also be serialized
by the console_lock, they can use the same static printk buffers
that the legacy consoles are using.
Make the legacy static printk buffers available outside of printk.c
so they can be used by nbcon.c.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-4-john.ogness@linutronix.de
Add per console acquire/release functionality.
The state of the console is maintained in the "nbcon_state" atomic
variable.
The console is locked when:
- The 'prio' field contains the priority of the context that owns the
console. Only higher priority contexts are allowed to take over the
lock. A value of 0 (NBCON_PRIO_NONE) means the console is not locked.
- The 'cpu' field denotes on which CPU the console is locked. It is used
to prevent busy waiting on the same CPU. Also it informs the lock owner
that it has lost the lock in a more complex scenario when the lock was
taken over by a higher priority context, released, and taken on another
CPU with the same priority as the interrupted owner.
The acquire mechanism uses a few more fields:
- The 'req_prio' field is used by the handover approach to make the
current owner aware that there is a context with a higher priority
waiting for the friendly handover.
- The 'unsafe' field allows to take over the console in a safe way in the
middle of emitting a message. The field is set only when accessing some
shared resources or when the console device is manipulated. It can be
cleared, for example, after emitting one character when the console
device is in a consistent state.
- The 'unsafe_takeover' field is set when a hostile takeover took the
console in an unsafe state. The console will stay in the unsafe state
until re-initialized.
The acquire mechanism uses three approaches:
1) Direct acquire when the console is not owned or is owned by a lower
priority context and is in a safe state.
2) Friendly handover mechanism uses a request/grant handshake. It is used
when the current owner has lower priority and the console is in an
unsafe state.
The requesting context:
a) Sets its priority into the 'req_prio' field.
b) Waits (with a timeout) for the owning context to unlock the
console.
c) Takes the lock and clears the 'req_prio' field.
The owning context:
a) Observes the 'req_prio' field set on exit from the unsafe
console state.
b) Gives up console ownership by clearing the 'prio' field.
3) Unsafe hostile takeover allows to take over the lock even when the
console is an unsafe state. It is used only in panic() by the final
attempt to flush consoles in a try and hope mode.
Note that separate record buffers are used in panic(). As a result,
the messages can be read and formatted without any risk even after
using the hostile takeover in unsafe state.
The release function simply clears the 'prio' field.
All operations on @console::nbcon_state are atomic cmpxchg based to
handle concurrency.
The acquire/release functions implement only minimal policies:
- Preference for higher priority contexts.
- Protection of the panic CPU.
All other policy decisions must be made at the call sites:
- What is marked as an unsafe section.
- Whether to spin-wait if there is already an owner and the console is
in an unsafe state.
- Whether to attempt an unsafe hostile takeover.
The design allows to implement the well known:
acquire()
output_one_printk_record()
release()
The output of one printk record might be interrupted with a higher priority
context. The new owner is supposed to reprint the entire interrupted record
from scratch.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-3-john.ogness@linutronix.de
The current console/printk subsystem is protected by a Big Kernel Lock,
(aka console_lock) which has ill defined semantics and is more or less
stateless. This puts severe limitations on the console subsystem and
makes forced takeover and output in emergency and panic situations a
fragile endeavour that is based on try and pray.
The goal of non-BKL (nbcon) consoles is to break out of the console lock
jail and to provide a new infrastructure that avoids the pitfalls and
also allows console drivers to be gradually converted over.
The proposed infrastructure aims for the following properties:
- Per console locking instead of global locking
- Per console state that allows to make informed decisions
- Stateful handover and takeover
As a first step, state is added to struct console. The per console state
is an atomic_t using a 32bit bit field.
Reserve state bits, which will be populated later in the series. Wire
it up into the console register/unregister functionality.
It was decided to use a bitfield because using a plain u32 with
mask/shift operations resulted in uncomprehensible code.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-2-john.ogness@linutronix.de
The hid-nvidia-shield driver uses functions that are built
only when LEDS_CLASS is set, so make the driver depend on that
symbol to prevent build errors.
riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L11':
hid-nvidia-shield.c:(.text+0x192): undefined reference to `led_classdev_unregister'
riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L113':
hid-nvidia-shield.c:(.text+0xfa4): undefined reference to `led_classdev_register_ext'
Fixes: 09308562d4 ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using hidpp for the M720 adds battery info reporting and hires
scrolling support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We're using various ERR macros from linux/err.h but the include is
missing. Add it.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The hid_hw_raw_request() function returns negative error codes or the
number bytes transferred. The problem is that when it returns negative
error codes and we check if "ret < sizeof(arctis_1_battery_request)",
then the negative values are type promoted from int to high unsigned long
values and treated as success.
This was detected using Smatch:
drivers/hid/hid-steelseries.c:393 steelseries_headset_arctis_1_fetch_battery()
warn: error code type promoted to positive: 'ret'
Fixes: a0c76896c3 ("HID: steelseries: Add support for Arctis 1 XBox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
wlcore_remove() returned zero unconditionally. With that converted to
return void instead, the wl12xx and wl18xx driver can be converted to
.remove_new trivially.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230912171249.755901-1-u.kleine-koenig@pengutronix.de
According to the driver provided by EDIMAX, the device ID
0x7392:0xb722 belongs to EDIMAX EW-7722UTn V3, so add a comment about this.
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230912053614.10644-1-zenmchen@gmail.com
Using mac_gen pointer to reuse the code with WiFi 7 chips, and define
MAC ports registers for WiFi 7 chips.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-7-pkshih@realtek.com
MAC port is a design to support virtual interface on single MAC hardware.
For next generation chips, register addresses are changed but definitions
are the same, so move registers together to be easier to reuse codes.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-6-pkshih@realtek.com
For existing chips, size of TX WD info is 6 words, but upcoming WiFi 7
chips become 8 words, so add a chip_info to reuse the code.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-5-pkshih@realtek.com
The format v2 of TX descriptor contains 8-word body and 8-word info, and
fields include packet size, MAC_ID, security key ID and etc.
By design, it can possibly only fill body to reduce overhead, but this
driver keeps thing simple, so always fill body and info currently.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-4-pkshih@realtek.com
This kind of TX descriptor is used to download firmware or send firmware
command. Because we want to reduce descriptor overhead and this only needs
two fields 'size' and 'type', hardware designers choose short form of
RX descriptor for it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-3-pkshih@realtek.com
RX descriptor is used to provide meta data of received data. The WiFi 7
chips use different RX descriptor format, so add this parser along with
hardware design.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230911082049.33541-2-pkshih@realtek.com
In MCC STA+GO mode, we calculate NoA information and fill it into the
beacon of P2P GO. Since NoA uses only 32 bits to describe time things,
we need to deal with renewal when TSF[63:32] is carried. We trigger FW
to notify that. Then, we can update NoA information for new time period
once we get notification from FW.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-9-pkshih@realtek.com
When receiving request of adjusting BT slot from coex. mechanism,
we need to fetch the new BT slot and use the new one to calculate
MCC (multi-channel concurrency) pattern. Then, we update the new
MCC pattern to FW.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-8-pkshih@realtek.com
MCC fills duration limit of a role according to NoA description.
If P2P PS changes during MCC, we don't process P2P PS via normal
flow. Instead, we re-fill duration limit of the role for new NoA
description, and then we do MCC update.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-7-pkshih@realtek.com
In MCC STA+GC mode, the offset between TBTTs of remote AP and remote GO
might change. If the change is larger than tolerance, we should update
MCC after re-calculating parameters for new things. So, we track that in
rtw89_track_work() now. And, we add MCC update flow to tell FW either to
change durations of roles or to replace entire pattern according to how
MCC plans BT slot.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-6-pkshih@realtek.com
Each MCC (multi-channel concurrency) role maintains a bitmap of mac IDs.
The bitmap is supposed to contain the two points below.
* mac ID of itself
* mac ID(s) of STA(s) connecting to it
Under STA+GC mode, the bitmaps of both roles should not change. However,
under STA+GO mode, the bitmap of GO may change due to P2P clients which
connect/disconnect to/from it.
FW controls (TDMA-based) MCC things via mac IDs in bitmap of each role.
For example, mac IDs are required by FW when it wants to pause role1's
TX in role0 slot.
So, to sync between driver and FW, we update the new mac ID bitmap of GO
to FW once it's changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-5-pkshih@realtek.com
DPK is one kind of RF calibration. When MCC (multi-channel concurrency)
start/stop, DPK needs to do extra things to be off/on. We add a chanctx
callback type, RTW89_CHANCTX_CALLBACK_RFK, and register it for RTL8852C
to deal with DPK according to MCC states.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-4-pkshih@realtek.com
After MCC (multi-channel concurrency) is started, FW will control channel
changes and use the corresponding backup of RF calibration result. And,
driver RF calibration (RF-K) won't be able to keep up with the speed at
which the channels are changing. So, even if we keep tracking it in driver,
the RF-K result might not be good either. To save these unnecessary things,
we disable driver RF-K tracking during MCC.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-3-pkshih@realtek.com
RF calibration will notify FW to backup the calibration result after it
is done on a channel. For MCC (multi-channel concurrency) flow, when we
at RTW89_ENTITY_MODE_MCC_PREPARE mode, RF calibration should execute on
second channel of MCC, i.e. RTW89_SUB_ENTITY_1, and then, notify FW to
backup the result for the second one.
Originally, the RF calibration flow only fit single channel case. We are
planning to support MCC on RTL8852C, so we refine its RF calibration flow
to fit MCC case.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-2-pkshih@realtek.com
While converting struct ieee80211_tim_ie::virtual_map to be a flexible
array it was observed that the TIM IE processing in cw1200_rx_cb()
could potentially process a malformed IE in a manner that could result
in a buffer over-read. Add logic to verify that the TIM IE length is
large enough to hold a valid TIM payload before processing it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831-ieee80211_tim_ie-v3-1-e10ff584ab5d@quicinc.com
Patch eef46ab713 introduced a new gfs2 quota=quiet mount option.
Checks for the new option were added to quota.c, but a check in
gfs2_quota_lock_check() was overlooked. This patch adds the missing
check.
Fixes: eef46ab713 ("gfs2: Introduce new quota=quiet mount option")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The if-statement within the vmd_resume() function has an inconsistent
indentation that leads to a compile time warning.
Thus, correct the inconsistent indentation. While at it, remove the
if-statement completely, which will make the code simpler.
This was detected by Smatch:
drivers/pci/controller/vmd.c:1066 vmd_resume() warn: inconsistent indenting
No functional changes are intended.
[kwilczynski: use correct tags, commit log]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-pci/20230627113808.269716-1-korantwork@gmail.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Before this patch, function gfs2_scan_glock_lru would only try to free
glocks that had a reference count of 0. But if the reference count ever
got to 0, the glock should have already been freed.
Shrinker function gfs2_dispose_glock_lru checks whether glocks on the
LRU are demote_ok, and if so, tries to demote them. But that's only
possible if the reference count is at least 1.
This patch changes gfs2_scan_glock_lru so it will try to demote and/or
dispose of glocks that have a reference count of 1 and which are either
demotable, or are already unlocked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
On a thawed filesystem, the freeze glock is held in shared mode. In
order to initiate a cluster-wide freeze, the node initiating the freeze
drops the freeze glock and grabs it in exclusive mode. The other nodes
recognize this as contention on the freeze glock; function
freeze_go_callback is invoked. This indicates to them that they must
freeze the filesystem locally, drop the freeze glock, and then
re-acquire it in shared mode before being able to unfreeze the
filesystem locally.
While a node is trying to re-acquire the freeze glock in shared mode,
additional contention can occur. In that case, the node must behave in
the same way as above.
Unfortunately, freeze_go_callback() contains a check that causes it to
bail out when the freeze glock isn't held in shared mode. Fix that to
allow the glock to be unlocked or held in shared mode.
In addition, update a reference to trylock_super() which has been
renamed to super_trylock_shared() in the meantime.
Fixes: b77b4a4815 ("gfs2: Rework freeze / thaw logic")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If a sink is removed in the middle of payload addition
drm_dp_add_payload_part1() will fail as expected, either not finding the
payload's MST port or failing the payload-add AUX transaction.
Based on the above tune the error message down to a debug messge.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-4-imre.deak@intel.com
Return an error during payload addition if the payload port isn't
found. This shouldn't change the behavior since only the i915 driver
checks the return value, printing an error message in case of a failure.
While at it simplify the control flow.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-2-imre.deak@intel.com
By this patch, DAI format might be automatically selected
(Depends on paired DAI, and/or Sound Card).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linh Phung <linh.phung.jy@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://lore.kernel.org/r/87y1hdh4f1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use P/C instead of M/S for SND_SOC_DAIFMT_CBx_CFx.
We should use SND_SOC_DAIFMT_xxx instead of SND_SOC_DAI_FORMAT_xxx
This patch tidyup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg1th4f8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8782 can safely support rates higher than 48kHz by changing the
value of the FSAMPEN pin.
Allow specifying the FSAMPEN pin value in the device tree.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-4-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8782 supports rates 96kHz and 192kHz as long as the hardware
is configured properly. Allow this to be specified in the device tree.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-3-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8782 supports up to 192kHz audio when pins are set correctly.
Instead of hardcoding which rates are supported constrain them at
runtime based on a max_rate variable.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-2-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hans has been asking for another person to help as the maintainer of
the x86 platform driver because Mark has not been able to find time to
do that. I got asked for the task and have been reviewing the relevant
patches for a while now but lets make it more official by adding the
MAINTAINERS entries.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918102901.17669-2-ilpo.jarvinen@linux.intel.com
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit 2d47c6956a ("ubsan: Tighten UBSAN_BOUNDS on GCC"),
UBSAN_BOUNDS no longer pretends 1-element arrays are unbounded. Walking
'element' and 'channel_list' will trigger warnings, so make them proper
flexible arrays.
False positive warnings were:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:6984:20
index 1 is out of range for type '__le32 [1]'
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1126:27
index 1 is out of range for type '__le16 [1]'
for these lines of code:
6884 ch.chspec = (u16)le32_to_cpu(list->element[i]);
1126 params_le->channel_list[i] = cpu_to_le16(chanspec);
Cc: stable@vger.kernel.org # 6.5+
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230914070227.12028-1-juerg.haefliger@canonical.com
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes: 1195852816 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org
The MAC address is stored at offset 0x107 in the EEPROM, like correctly
stated in the comment. Add a two bytes reserved field right before the
MAC address to shift it from offset 0x105 to 0x107.
With this the MAC address returned from my RTL8723du wifi stick can be
correctly decoded as "Shenzhen Four Seas Global Link Network Technology
Co., Ltd."
Fixes: 87caeef032 ("wifi: rtw88: Add rtw8723du chipset support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Yanik Fuchs <Yanik.fuchs@mbv.ch>
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230907071614.2032404-1-s.hauer@pengutronix.de
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes: 38831eaf7d ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bf ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bf ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Walleij modified AB8500 to use the generic simple-battery
and samsung,battery bindings. This is an unused leftover that
can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230917190124.1012316-1-sebastian.reichel@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently the bcm2835 SPI driver uses functions that are available
exclusively to GPIO providers as a way to handle a platform quirk. Let's
use a slightly better alternative that avoids poking around in GPIOLIB's
internals and use GPIO lookup tables.
Link: https://www.spinics.net/lists/linux-gpio/msg36218.html
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911161553.24313-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Both callers of spi_stop_queue() (i.e. spi_destroy_queue() and
spi_controller_suspend()) already emit an error message if
spi_stop_queue() fails. Another warning in this case isn't helpful, so
drop it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230916161235.1050176-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>