Commit graph

1,233,452 commits

Author SHA1 Message Date
Tomi Valkeinen
6985c5efc4
drm/bridge: lt8912b: Manually disable HPD only if it was enabled
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.

Add the check to avoid wrongly calling drm_bridge_hpd_disable().

Fixes: 3b0a01a6a5 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com
2023-09-05 16:43:36 +02:00
Tomi Valkeinen
4428399314
drm/bridge: lt8912b: Fix crash on bridge detach
The lt8912b driver, in its bridge detach function, calls
drm_connector_unregister() and drm_connector_cleanup().

drm_connector_unregister() should be called only for connectors
explicitly registered with drm_connector_register(), which is not the
case in lt8912b.

The driver's drm_connector_funcs.destroy hook is set to
drm_connector_cleanup().

Thus the driver should not call either drm_connector_unregister() nor
drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a
crash on bridge detach:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
  ESR = 0x0000000096000006
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x06: level 2 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
  CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000
[0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks
CPU: 3 PID: 462 Comm: rmmod Tainted: G        W          6.5.0-rc2+ #2
Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_connector_cleanup+0x78/0x2d4 [drm]
lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
sp : ffff800082ed3a90
x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000
x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122
x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000
x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8
x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038
x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e
x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48
x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0
x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 drm_connector_cleanup+0x78/0x2d4 [drm]
 lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
 drm_bridge_detach+0x44/0x84 [drm]
 drm_encoder_cleanup+0x40/0xb8 [drm]
 drmm_encoder_alloc_release+0x1c/0x30 [drm]
 drm_managed_release+0xac/0x148 [drm]
 drm_dev_put.part.0+0x88/0xb8 [drm]
 devm_drm_dev_init_release+0x14/0x24 [drm]
 devm_action_release+0x14/0x20
 release_nodes+0x5c/0x90
 devres_release_all+0x8c/0xe0
 device_unbind_cleanup+0x18/0x68
 device_release_driver_internal+0x208/0x23c
 driver_detach+0x4c/0x94
 bus_remove_driver+0x70/0xf4
 driver_unregister+0x30/0x60
 platform_driver_unregister+0x14/0x20
 tidss_platform_driver_exit+0x18/0xb2c [tidss]
 __arm64_sys_delete_module+0x1a0/0x2b4
 invoke_syscall+0x48/0x110
 el0_svc_common.constprop.0+0x60/0x10c
 do_el0_svc_compat+0x1c/0x40
 el0_svc_compat+0x40/0xac
 el0t_32_sync_handler+0xb0/0x138
 el0t_32_sync+0x194/0x198
Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420)

Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-2-c542692c6a2f@ideasonboard.com
2023-09-05 16:43:36 +02:00
Tomi Valkeinen
941882a0e9
drm/bridge: lt8912b: Fix bridge_detach
The driver calls lt8912_bridge_detach() from its lt8912_remove()
function. As the DRM core detaches bridges automatically, this leads to
calling lt8912_bridge_detach() twice. The code probably has tried to
manage the double-call with the 'is_attached' variable, but the driver
never sets the variable to false, so its of no help.

Fix the issue by dropping the call to lt8912_bridge_detach() from
lt8912_remove(), as the DRM core will handle the detach call for us,
and also drop the useless is_attached field.

Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-1-c542692c6a2f@ideasonboard.com
2023-09-05 16:43:11 +02:00
Matteo Rizzo
76d3ccecfa io_uring: add a sysctl to disable io_uring system-wide
Introduce a new sysctl (io_uring_disabled) which can be either 0, 1, or
2. When 0 (the default), all processes are allowed to create io_uring
instances, which is the current behavior.  When 1, io_uring creation is
disabled (io_uring_setup() will fail with -EPERM) for unprivileged
processes not in the kernel.io_uring_group group.  When 2, calls to
io_uring_setup() fail with -EPERM regardless of privilege.

Signed-off-by: Matteo Rizzo <matteorizzo@google.com>
[JEM: modified to add io_uring_group]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/x49y1i42j1z.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-05 08:34:07 -06:00
Jai Luthra
d0375f6858
drm: bridge: it66121: Fix invalid connector dereference
Fix the NULL pointer dereference when no monitor is connected, and the
sound card is opened from userspace.

Instead return an empty buffer (of zeroes) as the EDID information to
the sound framework if there is no connector attached.

Fixes: e0fd83dbe9 ("drm: bridge: it66121: Add audio support")
Reported-by: Nishanth Menon <nm@ti.com>
Closes: https://lore.kernel.org/all/20230825105849.crhon42qndxqif4i@gondola/
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901-it66121_edid-v2-1-aa59605336b9@ti.com
2023-09-05 16:23:58 +02:00
Biju Das
29ff3b7e23
drm: bridge: it66121: Simplify probe()
Simplify probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data by i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818191817.340360-3-biju.das.jz@bp.renesas.com
2023-09-05 16:16:16 +02:00
Biju Das
c11c1a5057
drm: bridge: it66121: Extend match support for OF tables
The driver has OF match table, still it uses ID lookup table for
retrieving match data. Currently the driver is working on the
assumption that a I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using of_device_match_data() if the devices are registered via OF.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818191817.340360-2-biju.das.jz@bp.renesas.com
2023-09-05 16:16:15 +02:00
Bob Peterson
0e072cac92 gfs2: change qd_slot_count to qd_slot_ref
Variable qd_slot_count is a reference count, not a count of slots. This
patch renames it to qd_slot_ref to make that more clear.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
06aa6fd31a gfs2: check for no eligible quota changes
Before this patch, function gfs2_quota_sync would always allocate a page
full of memory and increment its quota sync generation number. This
happened even when the system was completely idle or if no blocks were
allocated or quota changes made. This patch adds function qd_changed
to determine if any changes have been made that qualify for a
quota sync. If not, it avoids the memory allocation and bumping the
generation number, along with all the additional work it would do.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
36a740916a gfs2: Remove useless assignment
This assignment is unnecessary because if error was not already 0, it
would have branched to an error label already.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
9ab7b78a13 gfs2: simplify slot_get
Simplify function slot_get and get rid of the goto that jumps into the
middle of an else branch.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
8f190c97a4 gfs2: Simplify qd2offset
This is a minor cleanup of function qd2offset.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
7dbc6ae60d gfs2: introduce qd_bh_get_or_undo
This patch is an attempt to force some consistency in quota sync
processing. Two functions (qd_fish and gfs2_quota_unlock) called
qd_check_sync, after which they both called bh_get, and if that failed,
they took the same steps to undo the actions of qd_check_sync.

This patch introduces a new function, qd_bh_get_or_undo, which performs
the same steps, reducing code redundancy.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
3932e50730 gfs2: Remove quota allocation info from quota file
Function do_sync called gfs2_qa_get and put for quota allocation data.
But the inode in question is the system master quota file, which is
never subject to quotas. Therefore, a qa structure should be unnecessary
and if anything accesses it, it's probably a bug.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
c9ff3c65c2 gfs2: use constant for array size
Function gfs2_quota_unlock declared an array of 4 qd elements. We have a
constant for that, we should be using it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
fce17cb0ee gfs2: Set qd_sync_gen in do_sync
Func do_sync was called in two places: gfs2_quota_unlock and
gfs2_quota_sync. In gfs2_quota_sync it updated qd_sync_gen to the latest
superblock sync gen, if do_sync was successful. In gfs2_quota_unlock it
didn't update the value. That can only lead to extra work, for example,
if the value is synced by gfs2_quota_unlock but still has the old value.

This patch moves the setting of qd_sync_gen inside do_sync so we are
guaranteed consistency.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
dec64ae37b gfs2: Remove useless err set
Function gfs2_adjust_quota set variable err, then set it again to a
different value. This patch removes the redundant set.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
f511e60a55 gfs2: Small gfs2_quota_lock cleanup
No need to set error = 0 since it's set further down.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
a4d22e337d gfs2: move qdsb_put and reduce redundancy
This patch looks more invasive than it is. It simply moves function
qdsb_put before qd_unlock, then changes qd_unlock to call it rather than
open coding it. Again, this reduces redundancy.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
03d468f1c0 gfs2: improvements to sysfs status
This patch adds some new fields to the gfs2 status file in sysfs to aid
in debugging.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
9f494e9bdc gfs2: Don't try to sync non-changes
Function need_sync is supposed to determine if a qd element needs to be
synced. If the "change" (qd_change) is zero, it does not need to be
synced because there's literally no change in the value. Before this
patch need_sync returned false if value < 0. That should be <= 0.
This patch changes the check to <=.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
2a4f651167 gfs2: Simplify function need_sync
This patch simplifies function need_sync by eliminating a variable in
favor of just returning the appropriate value as soon as we know it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:18 +02:00
Bob Peterson
e34c16c9c6 gfs2: remove unneeded pg_oflow variable
Function gfs2_write_disk_quota checks if its write overflows onto
another page, and if so, does a second write. Before this patch it kept
two variables for this, but only one is needed. This patch simplifies
it by eliminating pg_oflow.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
f0418e4b56 gfs2: remove unneeded variable done
Function gfs2_write_buf_to_page uses variable done to exit its loop, but
it's unnecessary if we just code an infinite loop and exit when we need.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
d96dad2715 gfs2: pass sdp to gfs2_write_buf_to_page
This patch passes the superblock pointer to gfs2_write_buf_to_page so it
becomes more apparent it's dealing with the system quota file.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
adfd2b5e4f gfs2: pass sdp in to gfs2_write_disk_quota
Like the previous patch, we now pass the superblock pointer to function
gfs2_write_disk_quota. This makes the code more understandable, since it
only operates on the quota inode.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
ee1768e467 gfs2: Pass sdp to gfs2_adjust_quota
Before this change function gfs2_adjust_quota's first parameter was an
gfs2_inode pointer. But it always pointed to the quota inode. Here we
switch that to pass the superblock pointer, sdp, so it is easier to read
the code and understand that it's only dealing with the quota inode.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
768963ab07 gfs2: remove dead code for quota writes
Since patch 845802b112 function gfs2_write_buf_to_page checks if the
target inode is jdata or ordered. This function only operates on the
system quota file, which is always jdata, so the check for jdata is
useless. This patch removes it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Bob Peterson
eef46ab713 gfs2: Introduce new quota=quiet mount option
This patch adds a new mount option quota=quiet which is the same as
quota=on but it suppresses gfs2 quota error messages.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
267d1a011e gfs2: Add device name to gfs2_logd and gfs2_quotad
Add the device name to the names of the gfs2_logd and gfs2_quotad kernel
threads to allow for easier identification.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
ab8eecf5d0 gfs2: Rename "freeze_workqueue" to "gfs2_freeze"
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
5c0dc371a2 gfs2: Rename "gfs_recovery" workqueue to "gfs2_recovery"
Rename the "gfs_recovery" workqueue to "gfs2_recovery", and
gfs_recovery_wq to gfs2_recovery_wq.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
e3da6be3d7 gfs2: Fix withdraw race
Function gfs2_withdraw() tries to synchronize concurrent callers by
atomically setting the SDF_WITHDRAWN flag in the first caller, setting
the SDF_WITHDRAW_IN_PROG flag to indicate that a withdraw is in
progress, performing the actual withdraw, and clearing the
SDF_WITHDRAW_IN_PROG flag when done.  All other callers wait for the
SDF_WITHDRAW_IN_PROG flag to be cleared before returning.

This leaves a small window in which callers can find the SDF_WITHDRAWN
flag set before the SDF_WITHDRAW_IN_PROG flag has been set, causing them
to return prematurely, before the withdraw has been completed.

Fix that by setting the SDF_WITHDRAWN and SDF_WITHDRAW_IN_PROG flags
atomically.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
fe0690f0a6 gfs2: Sanitize kthread stopping
Immediately stop the logd and quotad kernel threads when a filesystem
withdraw is detected: those threads aren't doing anything useful after a
withdraw.  (Depends on the extra logd and quotad task struct references
held since commit 7a109f383fa3 ("gfs2: Fix asynchronous thread
destruction").)

In addition, check for kthread_should_stop() in the wait condition in
gfs2_quotad() to stop immediately when kthread_stop() is called.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
e4a8b5481c gfs2: Switch to wait_event in gfs2_quotad
In gfs2_quotad(), switch from an open-coded wait loop to
wait_event_interruptible_timeout().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
fe4f7940d2 gfs2: Fix asynchronous thread destruction
The kernel threads are currently stopped and destroyed synchronously by
gfs2_make_fs_ro() and gfs2_put_super(), and asynchronously by
signal_our_withdraw(), with no synchronization, so the synchronous and
asynchronous contexts can race with each other.

First, when creating the kernel threads, take an extra task struct
reference so that the task struct won't go away immediately when they
terminate.  This allows those kthreads to terminate immediately when
they're done rather than hanging around as zombies until they are reaped
by kthread_stop().  When kthread_stop() is called on a terminated
kthread, it will return immediately.

Second, in signal_our_withdraw(), once the SDF_JOURNAL_LIVE flag has
been cleared, wake up the logd and quotad wait queues instead of
stopping the logd and quotad kthreads.  The kthreads are then expected
to terminate automatically within short time, but if they cannot, they
will not block the withdraw.

For example, if a user process and one of the kthread decide to withdraw
at the same time, only one of them will perform the actual withdraw and
the other will wait for it to be done.  If the kthread ends up being the
one to wait, the withdrawing user process won't be able to stop it.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
f66af88e33 gfs2: Stop using gfs2_make_fs_ro for withdraw
[   81.372851][ T5532] CPU: 1 PID: 5532 Comm: syz-executor.0 Not tainted 6.2.0-rc1-syzkaller-dirty #0
[   81.382080][ T5532] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
[   81.392343][ T5532] Call Trace:
[   81.395654][ T5532]  <TASK>
[   81.398603][ T5532]  dump_stack_lvl+0x1b1/0x290
[   81.418421][ T5532]  gfs2_assert_warn_i+0x19a/0x2e0
[   81.423480][ T5532]  gfs2_quota_cleanup+0x4c6/0x6b0
[   81.428611][ T5532]  gfs2_make_fs_ro+0x517/0x610
[   81.457802][ T5532]  gfs2_withdraw+0x609/0x1540
[   81.481452][ T5532]  gfs2_inode_refresh+0xb2d/0xf60
[   81.506658][ T5532]  gfs2_instantiate+0x15e/0x220
[   81.511504][ T5532]  gfs2_glock_wait+0x1d9/0x2a0
[   81.516352][ T5532]  do_sync+0x485/0xc80
[   81.554943][ T5532]  gfs2_quota_sync+0x3da/0x8b0
[   81.559738][ T5532]  gfs2_sync_fs+0x49/0xb0
[   81.564063][ T5532]  sync_filesystem+0xe8/0x220
[   81.568740][ T5532]  generic_shutdown_super+0x6b/0x310
[   81.574112][ T5532]  kill_block_super+0x79/0xd0
[   81.578779][ T5532]  deactivate_locked_super+0xa7/0xf0
[   81.584064][ T5532]  cleanup_mnt+0x494/0x520
[   81.593753][ T5532]  task_work_run+0x243/0x300
[   81.608837][ T5532]  exit_to_user_mode_loop+0x124/0x150
[   81.614232][ T5532]  exit_to_user_mode_prepare+0xb2/0x140
[   81.619820][ T5532]  syscall_exit_to_user_mode+0x26/0x60
[   81.625287][ T5532]  do_syscall_64+0x49/0xb0
[   81.629710][ T5532]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

In this backtrace, gfs2_quota_sync() takes quota data references and
then calls do_sync().  Function do_sync() encounters filesystem
corruption and withdraws the filesystem, which (among other things) calls
gfs2_quota_cleanup().  Function gfs2_quota_cleanup() wrongly assumes
that nobody is holding any quota data references anymore, and destroys
all quota data objects.  When gfs2_quota_sync() then resumes and
dereferences the quota data objects it is holding, those objects are no
longer there.

Function gfs2_quota_cleanup() deals with resource deallocation and can
easily be delayed until gfs2_put_super() in the case of a filesystem
withdraw.  In fact, most of the other work gfs2_make_fs_ro() does is
unnecessary during a withdraw as well, so change signal_our_withdraw()
to skip gfs2_make_fs_ro() and perform the necessary steps directly
instead.

Thanks to Edward Adam Davis <eadavis@sina.com> for the initial patches.

Link: https://lore.kernel.org/all/0000000000002b5e2405f14e860f@google.com
Reported-by: syzbot+3f6a670108ce43356017@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
a475c5dd16 gfs2: Free quota data objects synchronously
In gfs2_quota_cleanup(), wait for the quota data objects to be freed
before returning.  Otherwise, there is no guarantee that the quota data
objects will be gone when their kmem cache is destroyed.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
bb73ae8ff3 gfs2: Fix initial quota data refcount
Fix the refcount of quota data objects created directly by
gfs2_quota_init(): those are placed into the in-memory quota "database"
for eventual syncing to the main quota file, but they are not actively
held and should thus have an initial refcount of 0.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:17 +02:00
Andreas Gruenbacher
fae2e73a55 gfs2: No more quota complaints after withdraw
Once a filesystem is withdrawn, don't complain about quota changes
that can't be synced to the main quota file anymore.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
faada74a90 gfs2: Factor out duplicate quota data disposal code
Rename gfs2_qd_dispose() to gfs2_qd_dispose_list().  Move some code
duplicated in gfs2_qd_dispose_list() and gfs2_quota_cleanup() into a
new gfs2_qd_dispose() function.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
961fe3422e gfs2: Use gfs2_qd_dispose in gfs2_quota_cleanup
Change gfs2_quota_cleanup() to move the quota data objects to dispose of
on a dispose list and call gfs2_qd_dispose() on that list, like
gfs2_qd_shrink_scan() does, instead of disposing of the quota data
objects directly.

This may look a bit pointless by itself, but it will make more sense in
combination with a fix that follows.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
6b0e9a5f1e gfs2: Fix wrong quota shrinker return value
Function gfs2_qd_isolate must only return LRU_REMOVED when removing the
item from the lru list; otherwise, the number of items on the list will
go wrong.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
e7beb8b6de gfs2: Rename SDF_DEACTIVATING to SDF_KILL
Rename the SDF_DEACTIVATING flag to SDF_KILL to make it more obvious
that this relates to the kill_sb filesystem operation.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
3c69c437bf gfs2: Rename sd_{ glock => kill }_wait
Rename sd_glock_wait to sd_kill_wait: we'll use it for other things
related to "killing" a filesystem on unmount soon (kill_sb).

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Bob Peterson
481f6e7d73 gfs2: Use qd_sbd more consequently
Before this patch many of the functions in quota.c got their superblock
pointer, sdp, from the quota_data's glock pointer. That's silly because
the qd already has its own pointer to the superblock (qd_sbd).

This patch changes references to use that instead, eliminating a level
of indirection.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
db77789bae gfs2: journal flush threshold fixes and cleanup
Commit f07b352021 ("GFS2: Made logd daemon take into account log
demand") changed gfs2_ail_flush_reqd() and gfs2_jrnl_flush_reqd() to
take sd_log_blks_needed into account, but the checks in
gfs2_log_commit() were not updated correspondingly.

Once that is fixed, gfs2_jrnl_flush_reqd() and gfs2_ail_flush_reqd() can
be used in gfs2_log_commit().  Make those two helpers available to
gfs2_log_commit() by defining them above gfs2_log_commit().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
b6b8f72a11 gfs2: Fix logd wakeup on I/O error
When quotad detects an I/O error, it sets sd_log_error and then it wakes
up logd to withdraw the filesystem.  However, logd doesn't wake up when
sd_log_error is set.  Fix that.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
b74cd55aa9 gfs2: low-memory forced flush fixes
First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost.  Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.

Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written.  If enough pages could be
written, flushing the AIL is unnecessary, though.

Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.

Fixes: b066a4eebd ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00
Andreas Gruenbacher
6df373b09b gfs2: Switch to wait_event in gfs2_logd
In gfs2_logd(), switch from an open-coded wait loop to
wait_event_interruptible_timeout().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-09-05 15:58:16 +02:00