Commit graph

1,233,452 commits

Author SHA1 Message Date
Linus Torvalds
0e8860d212 Including fixes from ipsec and netfilter.
No known outstanding regressions.
 
 Fixes to fixes:
 
  - virtio-net: set queues after driver_ok, avoid a potential race
    added by recent fix
 
  - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
    when VLAN 0 is registered explicitly
 
  - nf_tables:
    - fix false-positive lockdep splat in recent fixes
    - don't fail inserts if duplicate has expired (fix test failures)
    - fix races between garbage collection and netns dismantle
 
 Current release - new code bugs:
 
  - mlx5: Fix mlx5_cmd_update_root_ft() error flow
 
 Previous releases - regressions:
 
  - phy: fix IRQ-based wake-on-lan over hibernate / power off
 
 Previous releases - always broken:
 
  - sock: fix misuse of sk_under_memory_pressure() preventing system
    from exiting global TCP memory pressure if a single cgroup is under
    pressure
 
  - fix the RTO timer retransmitting skb every 1ms if linear option
    is enabled
 
  - af_key: fix sadb_x_filter validation, amment netlink policy
 
  - ipsec: fix slab-use-after-free in decode_session6()
 
  - macb: in ZynqMP resume always configure PS GTR for non-wakeup source
 
 Misc:
 
  - netfilter: set default timeout to 3 secs for sctp shutdown send and
    recv state (from 300ms), align with protocol timers
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmTemA4ACgkQMUZtbf5S
 IrtCThAAj+t35QM5BgGZowmrx9U4yF+kacDkdPztxlT8a/b+famrTtnZJ8USW+PF
 VCk3Eu8JXheuyAOMArHyM84/crS6wim6mzGcXaucusA3981PFzoqdgCLLf9emAJ2
 j9vzKrnHBtdd5fj8Exwq70KN4CzXyrzRgqwr2EXBK9lH59HjX0+J7o+trbDxNmFK
 RZJE2oDCqf939iRGG3PhJryKYBmrQaMtdonNpSU5PiiRT0HnVYcEtdWcOXK7d53D
 onpoaPdawcsqsns5c5Qj01E1OdyM8X54BEGkl/S4FmSw5jF9Bp6btmTcxYYtdb7E
 M3CeYROZ0Kt8KcKKje/o1AzdGqWq8Hnxfwy+2WulZAHMucshg0JPm6Ev74WRondw
 NGYriKJSdORSO8idK9K/i7pnjZXYr9gU50lpPUFU+QzSdd+zv+U11arjAodwI9Wi
 pW+dFi3UR7J01LidaxclvHmWnZ7d5sSzE2khpqb0xd0+PagRGesl8qnKyoDJNS1P
 IHsOrRh9aXLzEZjud/rVG+sUobQvc1oiHW+hvbJ04GLKoli9U5poGT2fcaa4O67M
 T7JcN5oGDF+PIHJKgTEN7pfX2epY33gmofKUhbt/OPOqnvZOVbTu7/ojjuJZ8Lc5
 SF8AvTe+lECcX8Htjq30PoVfai+FT6AhnZzK0H9K4HMfUB9O32Q=
 =Ze13
 -----END PGP SIGNATURE-----

Merge tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec and netfilter.

  No known outstanding regressions.

  Fixes to fixes:

   - virtio-net: set queues after driver_ok, avoid a potential race
     added by recent fix

   - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
     when VLAN 0 is registered explicitly

   - nf_tables:
      - fix false-positive lockdep splat in recent fixes
      - don't fail inserts if duplicate has expired (fix test failures)
      - fix races between garbage collection and netns dismantle

  Current release - new code bugs:

   - mlx5: Fix mlx5_cmd_update_root_ft() error flow

  Previous releases - regressions:

   - phy: fix IRQ-based wake-on-lan over hibernate / power off

  Previous releases - always broken:

   - sock: fix misuse of sk_under_memory_pressure() preventing system
     from exiting global TCP memory pressure if a single cgroup is under
     pressure

   - fix the RTO timer retransmitting skb every 1ms if linear option is
     enabled

   - af_key: fix sadb_x_filter validation, amment netlink policy

   - ipsec: fix slab-use-after-free in decode_session6()

   - macb: in ZynqMP resume always configure PS GTR for non-wakeup
     source

  Misc:

   - netfilter: set default timeout to 3 secs for sctp shutdown send and
     recv state (from 300ms), align with protocol timers"

* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
  ice: Block switchdev mode when ADQ is active and vice versa
  qede: fix firmware halt over suspend and resume
  net: do not allow gso_size to be set to GSO_BY_FRAGS
  sock: Fix misuse of sk_under_memory_pressure()
  sfc: don't fail probe if MAE/TC setup fails
  sfc: don't unregister flow_indr if it was never registered
  net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
  net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
  net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
  i40e: fix misleading debug logs
  iavf: fix FDIR rule fields masks validation
  ipv6: fix indentation of a config attribute
  mailmap: add entries for Simon Horman
  broadcom: b44: Use b44_writephy() return value
  net: openvswitch: reject negative ifindex
  team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
  net: phy: broadcom: stub c45 read/write for 54810
  netfilter: nft_dynset: disallow object maps
  netfilter: nf_tables: GC transaction race with netns dismantle
  netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
  ...
2023-08-18 06:52:23 +02:00
Linus Torvalds
1ada9c0740 drm fixes for 6.5-rc7
edid:
 - revert mode parsing fix that had side effects.
 
 i915:
 - Fix the flow for ignoring GuC SLPC efficient frequency selection
 - Fix SDVO panel_type initialization
 - Fix display probe for IVB Q and IVB D GT2 server
 
 nouveau:
 - fix use-after-free in connector code
 
 qaic:
 - integer overflow check fix
 - fix slicing memory leak
 
 panel:
 - fix JDI LT070ME05000 probing
 - fix AUO G121EAN01 timings
 
 amdgpu:
 - SMU 13.x fixes
 - Fix mcbp parameter for gfx9
 - SMU 11.x fixes
 - Temporary fix for large numbers of XCP partitions
 - S0ix fixes
 - DCN 2.0 fix
 
 qxl:
 - fix use after free race in dumb object allocation
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTekjgACgkQDHTzWXnE
 hr7Dtw/+Lmf8Puh9RIgqLFA6sThkRI3jaj5mr/0arFzCXhQKeVUFhDgbVMndQX2B
 JajuMYY/tz1ok5dDgUbFkY7P2v+JrDMEpADGbdv1F9OjzimBimydD0fyfY92NTPL
 LrugeBOQrgw2BQkY12GW010ThrzEYvapF0NTAgMXY10xsVfDkT1OkUS45TrM3KM8
 rX7Vwkd48DD+N+c6wjvPP6cIKQHxktOrziCmn2ggsklGUD0anIyVpZ5mk+YC2HV+
 fQKt8FihyWzdqRUEjpDn1p4HuLiaKYOBxy1Kwz8jJooqf9dA+SGA+AzXYP3wfUKs
 SmX7OpwWB22yhOA027oFm4y696EVg7Al4BqyblohWwwpY/hpTMxSReNQAAogTc13
 TFQ1QqDM84QDzaLG58jydxh/6gmvLuCZt4Wy/Ho+qHw+n0RGiqt29DkWcGfx0ETu
 a/t5NANMO+lInmDELi8ns/ZL3m9+uXvl3VDA49VhMk1mZv1Wt+UKz8wJg83tz9SQ
 7k9jpEntGGgqarF2X5hwIkTeZZtsnY3bdHaOmr2ed6OJ6Gq64r7gSfVaYx/EL5IN
 qF6s8Kbow9Y/5LGIkNry0KIrv6C6+XMQSYH0+F0TaeZFh55FPdPakJvxj8lkwGRT
 gWEhL1bKYeEHk7GgshztCgJl1lc47Dcbg4A7rVAH/Iyqgkqn/Hc=
 =P1rE
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular enough week, mostly the usual amdgpu and i915 fixes.  Also
  qaic, nouveau, qxl and a revert for an EDID patch that had some side
  effects, along with a couple of panel fixes.

  edid:
   - revert mode parsing fix that had side effects.

  i915:
   - Fix the flow for ignoring GuC SLPC efficient frequency selection
   - Fix SDVO panel_type initialization
   - Fix display probe for IVB Q and IVB D GT2 server

  nouveau:
   - fix use-after-free in connector code

  qaic:
   - integer overflow check fix
   - fix slicing memory leak

  panel:
   - fix JDI LT070ME05000 probing
   - fix AUO G121EAN01 timings

  amdgpu:
   - SMU 13.x fixes
   - Fix mcbp parameter for gfx9
   - SMU 11.x fixes
   - Temporary fix for large numbers of XCP partitions
   - S0ix fixes
   - DCN 2.0 fix

  qxl:
   - fix use after free race in dumb object allocation"

* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
  drm/qxl: fix UAF on handle creation
  Revert "drm/edid: Fix csync detailed mode parsing"
  drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: skip xcp drm device allocation when out of drm resource
  drm/amd/pm: Update pci link width for smu v13.0.6
  drm/amd/pm: Fix temperature unit of SMU v13.0.6
  drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
  drm/amdgpu: disable mcbp if parameter zero is set
  drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
  accel/qaic: Clean up integer overflow checking in map_user_pages()
  accel/qaic: Fix slicing memory leak
  drm/i915: fix display probe for IVB Q and IVB D GT2 server
  drm/i915/sdvo: fix panel_type initialization
  drm/i915/guc/slpc: Restore efficient freq earlier
  drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
  drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
2023-08-18 06:37:34 +02:00
Ankit Nautiyal
7adfec8c33 drm/i915/dp: Check if force_dsc_output_format is possible
Currently for testing an output format with DSC, we just force the
output format, without checking if it can be supported.
This also creates an issue where there is a PCON which might need to
convert from forced output format to the format to sink format.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-19-ankit.k.nautiyal@intel.com
2023-08-18 09:42:26 +05:30
Ankit Nautiyal
61d340faaa drm/i915/dp: Check src/sink compressed bpp limit for edp
Use checks for src and sink limits before computing compressed bpp for
eDP.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-18-ankit.k.nautiyal@intel.com
2023-08-18 09:42:25 +05:30
Ankit Nautiyal
1c56e9a398 drm/i915/dp: Get optimal link config to have best compressed bpp
Currently, we take the max lane, rate and pipe bpp, to get the maximum
compressed bpp possible. We then set the output bpp to this value.
This patch provides support to have max bpp, min rate and min lanes,
that can support the min compressed bpp.

v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
-Fix the checks for limits->max/min_bpp while iterating over list of
 valid DSC bpcs. (Stan)

v3:
-Refactor the code to have pipe bpp/compressed bpp computation and slice
count calculation separately for different cases.

v4:
-Separate the pipe_bpp calculation for eDP and DP.

v5:
-Get rid of magic numbers for max and min bpp,
and improve documentation. (Stan).
-Use functions for {src_sink}_{min_max}_compressed_bpp (Ville).

v6:
-Remove lines to set link config to max.

v7:
-Split the part to separate edp and dp functions for computing DSC BPP
into separate patch.

v8:
-Separate mechanism to get compressed bpp for ICL,TGL and XELPD+.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-17-ankit.k.nautiyal@intel.com
2023-08-18 09:42:24 +05:30
Ankit Nautiyal
a4d30841de drm/i915/dp: Separate out function to get compressed bpp with joiner
Pull the code to get joiner constraints on maximum compressed bpp into
separate function.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-16-ankit.k.nautiyal@intel.com
2023-08-18 09:42:24 +05:30
Ankit Nautiyal
874aa4a3ff drm/i915/dp: Add DSC BPC/BPP constraints while selecting pipe bpp with DSC
Currently we check if the pipe_bpp selected is >= the
min DSC bpc/bpp requirement. We do not check if it is <= the max DSC
bpc/bpp requirement.

Add checks for max DSC BPC/BPP constraints while computing the
pipe_bpp when DSC is in use.

v2: Fix the commit message.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-15-ankit.k.nautiyal@intel.com
2023-08-18 09:42:23 +05:30
Ankit Nautiyal
9c8160a343 drm/i915/dp: Separate out functions for edp/DP for computing DSC bpp
Refactor code to separate functions for eDP and DP for computing
pipe_bpp/compressed bpp when DSC is involved.

This will help to optimize the link configuration for DP later.

v2: Fix checkpatch warning.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-14-ankit.k.nautiyal@intel.com
2023-08-18 09:42:22 +05:30
Ankit Nautiyal
b9a7efcd99 drm/i915/dp: Rename helper to get DSC max pipe_bpp
The helper intel_dp_dsc_compute_bpp gives the maximum
pipe bpp that is allowed with DSC.

Rename the this to reflect that it returns max pipe bpp supported
with DSC.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-13-ankit.k.nautiyal@intel.com
2023-08-18 09:42:22 +05:30
Ankit Nautiyal
51dda14868 drm/i915/dp: Avoid left shift of DSC output bpp by 4
To make way for fractional bpp support, avoid left shifting the
output_bpp by 4 in helper intel_dp_dsc_get_output_bpp.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-12-ankit.k.nautiyal@intel.com
2023-08-18 09:42:21 +05:30
Ankit Nautiyal
2f4761c665 drm/i915/dp: Check min bpc DSC limits for dsc_force_bpc also
For DSC the min BPC is 8 for ICL+ and so the min pipe_bpp is 24.
Check this condition for cases where bpc is forced by debugfs flag
dsc_force_bpc. If the check fails, then WARN and ignore the debugfs
flag.

For MST case the pipe_bpp is already computed (hardcoded to be 24),
and this check is not required.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-11-ankit.k.nautiyal@intel.com
2023-08-18 09:42:20 +05:30
Ankit Nautiyal
8a969033ce drm/i915/dp: Add functions to get min/max src input bpc with DSC
Separate out functions for getting maximum and minimum input BPC based
on platforms, when DSC is used.

v2: Use HAS_DSC macro instead of platform check while getting min input
bpc. (Stan)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-10-ankit.k.nautiyal@intel.com
2023-08-18 09:42:20 +05:30
Ankit Nautiyal
e1a211e316 drm/i915/dp: Avoid forcing DSC BPC for MST case
For MST the bpc is hardcoded to 8, and pipe bpp to 24.
So avoid forcing DSC bpc for MST case.

v2: Warn and ignore the debug flag than to bail out. (Jani)

v3: Fix dbg message to mention forced bpc instead of bpp.

v4: Fix checkpatch longline warning.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-9-ankit.k.nautiyal@intel.com
2023-08-18 09:42:19 +05:30
Ankit Nautiyal
90bba71a1a drm/i915/dp: Remove extra logs for printing DSC info
DSC compressed bpp and slice counts are already getting printed at the
end of dsc compute config. Remove extra logs.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-8-ankit.k.nautiyal@intel.com
2023-08-18 09:42:18 +05:30
Ankit Nautiyal
7f5ac36526 drm/i915/intel_cdclk: Add vdsc with bigjoiner constraints on min_cdlck
As per Bsepc:49259, Bigjoiner BW check puts restriction on the
compressed bpp for a given CDCLK, pixelclock in cases where
Bigjoiner + DSC are used.

Currently compressed bpp is computed first, and it is ensured that
the bpp will work at least with the max CDCLK freq.

Since the CDCLK is computed later, lets account for Bigjoiner BW
check while calculating Min CDCLK.

v2: Use pixel clock in the bw calculations. (Ville)

v3: Use helper to account for FEC overhead. (Stan)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-7-ankit.k.nautiyal@intel.com
2023-08-18 09:42:17 +05:30
Ankit Nautiyal
d9f864efb9 drm/i915/dp: Update Bigjoiner interface bits for computing compressed bpp
In Bigjoiner check for DSC, bigjoiner interface bits for DP for
DISPLAY > 13 is 36 (Bspec: 49259).

v2: Corrected Display ver to 13.

v3: Follow convention for conditional statement. (Ville)

v4: Fix check for display ver. (Ville)

v5: Added note for 2 PPC. (Stan)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-6-ankit.k.nautiyal@intel.com
2023-08-18 09:42:17 +05:30
Ankit Nautiyal
8d5284765a drm/i915/dp: Use consistent name for link bpp and compressed bpp
Currently there are many places where we use output_bpp for link bpp and
compressed bpp.
Lets use consistent naming:
output_bpp : The intermediate value taking into account the
output_format chroma subsampling.
compressed_bpp : target bpp for the DSC encoder.
link_bpp : final bpp used in the link.

For 444 sampling without DSC:
link_bpp = output_bpp = pipe_bpp

For 420 sampling without DSC:
output_bpp = pipe_bpp / 2
link_bpp = output_bpp

For 444 sampling with DSC:
output_bpp = pipe_bpp
link_bpp = compressed_bpp, computed with output_bpp (i.e. pipe_bpp in
this case)

For 420 sampling with DSC:
output_bpp = pipe_bpp/2
link_bpp = compressed_bpp, computed with output_bpp

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-5-ankit.k.nautiyal@intel.com
2023-08-18 09:42:16 +05:30
Ankit Nautiyal
fd279d21ed drm/i915/dp_mst: Use output_format to get the final link bpp
The final link bpp used to calculate the m_n values depend on the
output_format. Though the output_format is set to RGB for MST case and
the link bpp will be same as the pipe bpp, for the sake of semantics,
lets calculate the m_n values with the link bpp, instead of pipe_bpp.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-4-ankit.k.nautiyal@intel.com
2023-08-18 09:42:15 +05:30
Ankit Nautiyal
3a4b4809c8 drm/i915/dp: Move compressed bpp check with 420 format inside the helper
Move the check for limiting compressed bits_per_pixel for 420,422
formats in the helper to compute bits_per_pixel.

v2: Fix typo in commit message. (Ankit)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-3-ankit.k.nautiyal@intel.com
2023-08-18 09:42:14 +05:30
Ankit Nautiyal
a1476c2a97 drm/i915/dp: Consider output_format while computing dsc bpp
While using DSC the compressed bpp is computed assuming RGB output
format. Consider the output_format and compute the compressed bpp
during mode valid and compute config steps.

For DP-MST we currently use RGB output format only, so continue
using RGB while computing compressed bpp for MST case.

v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-2-ankit.k.nautiyal@intel.com
2023-08-18 09:42:13 +05:30
David Jeffery
cc22b5407e md: raid0: account for split bio in iostat accounting
When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.

md_account_bio() needs to be called for all bio generated by the bio split.

A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:

Device             tps    kB_read/s    kB_wrtn/s    kB_dscd/s    kB_read
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0
md2            1364.00    411496.00         0.00         0.00     411496
sde            1734.00    646144.00         0.00         0.00     646144
md2            1699.00    510680.00         0.00         0.00     510680
sde            2155.00    802784.00         0.00         0.00     802784
md2             803.00    241480.00         0.00         0.00     241480
sde            1016.00    377888.00         0.00         0.00     377888
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0

I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.

The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.

Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
2023-08-17 21:11:31 -07:00
Jan Kara
319ff40a54 md/raid0: Fix performance regression for large sequential writes
Commit f00d7c85be ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:

  9,0   18     1181     0.525037895 15995  Q  WS 1479315464 + 63392

  Split off chunk-sized (1024 sectors) request:

  9,0   18     1182     0.629019647 15995  X  WS 1479315464 / 1479316488

  Request is unaligned to the chunk so it's split in
  raid0_make_request().  This is the first part mapped and punted to
  bio_list:

  8,0   18     7053     0.629020455 15995  A  WS 739921928 + 1016 <- (9,0) 1479315464

  Now raid0_make_request() returns, second part is postponed on
  bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
  is submitted to the underlying device:

  8,0   18     7054     0.629022782 15995  G  WS 739921928 + 1016

  Now we take another request from the bio_list which is the remainder
  of the original huge request. Split off another chunk-sized bit from
  it and the situation repeats:

  9,0   18     1183     0.629024499 15995  X  WS 1479316488 / 1479317512
  8,16  18     6998     0.629025110 15995  A  WS 739921928 + 1016 <- (9,0) 1479316488
  8,16  18     6999     0.629026728 15995  G  WS 739921928 + 1016
  ...
  9,0   18     1184     0.629032940 15995  X  WS 1479317512 / 1479318536 [libnetacq-write]
  8,0   18     7059     0.629033294 15995  A  WS 739922952 + 1016 <- (9,0) 1479317512
  8,0   18     7060     0.629033902 15995  G  WS 739922952 + 1016
  ...

  This repeats until we consume the whole original huge request. Now we
  finally get to processing the second parts of the split off requests
  (in reverse order):

  8,16  18     7181     0.629161384 15995  A  WS 739952640 + 8 <- (9,0) 1479377920
  8,0   18     7239     0.629162140 15995  A  WS 739952640 + 8 <- (9,0) 1479376896
  8,16  18     7186     0.629163881 15995  A  WS 739951616 + 8 <- (9,0) 1479375872
  8,0   18     7242     0.629164421 15995  A  WS 739951616 + 8 <- (9,0) 1479374848
  ...

I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.

Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.

Fixes: f00d7c85be ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:31 -07:00
Jan Kara
af50e20afb md/raid0: Factor out helper for mapping and submitting a bio
Factor out helper function for mapping and submitting a bio out of
raid0_make_request(). We will use it later for submitting both parts of
a split bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-1-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:31 -07:00
Heinz Mauelshagen
6b2460e66c md raid1: allow writebehind to work on any leg device set WriteMostly
As the WriteMostly flag can be set on any component device of a RAID1
array, remove the constraint that it only works if set on the first one.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/2a9592bf3340f34bf588eec984b23ee219f3985e.1692013451.git.heinzm@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:31 -07:00
Xueshi Hu
c069da449a md/raid1: hold the barrier until handle_read_error() finishes
handle_read_error() will call allow_barrier() to match the former barrier
raising. However, it should put the allow_barrier() at the end to avoid a
concurrent raid reshape.

Fixes: 689389a06c ("md/raid1: simplify handle_read_error().")
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-4-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:30 -07:00
Xueshi Hu
992db13a4a md/raid1: free the r1bio before waiting for blocked rdev
Raid1 reshape will change mempool and r1conf::raid_disks which are
needed to free r1bio. allow_barrier() make a concurrent raid1_reshape()
possible. So, free the in-flight r1bio before waiting blocked rdev.

Fixes: 6bfe0b4990 ("md: support blocking writes to an array on device failure")
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-3-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:30 -07:00
Xueshi Hu
c5d736f548 md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
After allow_barrier, a concurrent raid1_reshape() will replace old mempool
and r1conf::raid_disks. Move allow_barrier() to the end of raid_end_bio_io(),
so that r1bio can be freed safely.

Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-2-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
2023-08-17 21:11:30 -07:00
Vineet Gupta
0e93ecaeeb ARC: entry: EV_MachineCheck dont re-read ECR
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
6b606c8d66 ARC: entry: ARcompact EV_ProtV to use r10 directly
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
c505b0da76 ARC: entry: rework (non-functional)
- comments update
 - rename syscall_trace_entry
 - use PT_xxx in entry code

Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
fd476197c6 ARC: __switch_to: move ksp to thread_info from thread_struct
task's arch specific bits are carried in 2 places
 - embedded thread_struct in task_struct
 - associated thread_info (hoisted in task's stack page) and
   syntactically: (thread_info *)(task_struct->stack)

ksp (dynamic kernel stack top) currently lives in thread_struct but
given its deep location in task struct likely to cache miss when
accessed from  __switch_to(). Moving it to thread_info would be more
efficient given proximity to frequently accessed items such as
preempt_count thus very likely to be in cache, specially in schedular
code.

Note however that currently tsk.thread.ksp takes 1 memory access (off
of tsk pointer) while new code tsk->stack.ksp would take 2, but likely
to be in cache. Moreover if task is current the 2nd reference can be
elided and instead derived from SP as (SP & ~(THREAD_SIZE - 1))

All of this also makes __switch_to() code simpler and we can see the 2
ways of retirving ksp (descrobed above) in new code.

Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
b060b7d0c1 ARC: __switch_to: asm with dwarf ops (vs. inline asm)
__switch_to() is final step of context switch, swapping kernel modes
stack (and callee regs) of outgoing task with next task.

It is also the starting point of stack unwinging of a sleeping task and
captures SP, FP, BLINK and the corresponding dwarf info. Back when
dinosaurs still roamed around, ARC gas didn't support CFI pseudo ops and
gcc was responsible for generating dwarf info. Thus it had to be written
in "C" with inline asm to do the hand crafting of stack. The function
prologue (and crucial saving of blink etc) was still gcc generated but
not visible in code. Likewise dwarf info was missing.

Now with modern tools, we can make things more obvious by writing the
code in asm and adding approproate dwarf cfi pseudo ops.

This is mostly non functional change, except for slight chnages to asm

 - ARCompact doesn't support MOV_S fp, sp, so we use MOV

Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
d1d1569e89 ARC: kernel stack: INIT_THREAD need not setup @init_stack in @ksp
There are 2 pointers to kernel mode stack of a task
 - task_struct.stack: base address of stack page (max possible stack top)
 - thread_info.ksp  : runtime stack top in __switch_to

INIT_THREAD was setting up ksp to stack base which was not really needed
 - it would get overwritten with dynamic value on first call to
   __switch_to when init is switched out for the very first time.
 - generic code already does
      init_task.stack = init_stack
   and ARC code uses that to retrieve task's stack base.

Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
cfca4b5abe ARC: entry: use gp to cache task pointer (vs. r25)
The motivation is eventual ABI considerations for ARCv3 but even without
it this change us worthwhile as diffstat reduces 100 net lines

r25 is a callee saved register, normally not saved by entry code in
pt_regs. However because of its usage in CONFIG_ARC_CURR_IN_REG it needs
to be. This in turn requires a whole bunch of special casing when we
need to access r25. Then there is distinction between user mode r25 vs.
kernel mode r25 - hence distinct SAVE_CALLEE_SAVED_{USER,KERNEL}

Instead use gp which is a scratch register and thus saved already in entry
code. This cleans things up significantly and much nocer on eyes:

 - SAVE_CALLEE_SAVED_{USER,KERNEL} are now exactly same
 - no special user_r25 slot in pt_reggs

Note that typical global asm registers are callee-saved (r25), but gp is
not callee-saved thus needs additional -ffixed-<reg> toggle

Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
fad84e39f1 ARC: boot log: eliminate struct cpuinfo_arc #4: boot log per ISA
- boot log now clearly per ISA
 - global struct cpuinfo_arc[] elimiated
 - local struct struct arcinfo kept for passing info
   between functions

Tested-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308162101.Ve5jBg80-lkp@intel.com
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
c5b678b379 ARC: boot log: eliminate struct cpuinfo_arc #3: don't export
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
17a5ed563a ARC: boot log: eliminate struct cpuinfo_arc #2: cache
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:59 -07:00
Vineet Gupta
72d861f2d2 ARC: boot log: eliminate struct cpuinfo_arc #1: mm
This is first step in eliminating struct cpuinfo_arc[NR_CPUS]

Back when we had just ARCompact ISA, the idea was to read/bit-fiddle
the BCRs once and and cache decoded information in a global struct ready
to use.

With ARCv2 it was modified to contained abstract / ISA agnostic
information.

However with ARCv3 there 's too much disparity to abstract in common
structures. So drop the entire decode once and store paradigm. Afterall
there's only 2 users of this machinery anyways:  boot printing and
cat /proc/cpuinfo. None is performance critical to warrant locking away
resident memory per cpu.

This patch is first step in that direction
 - decouples struct cpuinfo_arc_mmu from global struct cpuinfo_arc
 - mmu code still has a trimmed down static version of
   struct cpuinfo_arc_mmu to cache information needed in performance
   critical code such as tlb flush routines
 - folds read_decode_mmu_bcr() into arc_mmu_mumbojumbo()
 - setup_processor() directly calls arc_mmu_init() and not via
   arc_cpu_init()

Tested-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151213.qKZPMiyz-lkp@intel.com/
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2023-08-17 20:31:57 -07:00
Konrad Dybcio
e1cd74b6dc clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
On all supported SoCs to date, the PCNoC (a.k.a CNoC_PERIPH) clock must
be always-on as long as the APSS is online and only has to run
at 19.2 MHz. Define it to be as such in the ACTIVE domain.

Some SoCs use that clock for bus scaling, while others just need it for
reaching the hardware. This commit will hurt neither.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-2-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-17 20:09:11 -07:00
Konrad Dybcio
2db8dc7bf4 clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
Some clocks, at least PCNoC (a.k.a CNoC_PERIPH) need to be always on,
at least on the ACTIVE side, regardless of whether they're used for bus
scaling or not.

Introduce a new macro to preset non-INT_MAX rates and clk flags to make
it easy and work implicitly through the CCF.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-1-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-17 20:09:11 -07:00
Yang Yingliang
a7bea084fb clk: qcom: gcc-ipq5018: change some variable static
lpass_axim_clk_src and lpass_sway_clk_src are only
used in gcc-ipq5018.c now, change them to static.

Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230816080113.1222352-1-yangyingliang@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-17 20:07:54 -07:00
Amit Pundir
110e70fccc arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).

It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y.

Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-17 19:50:45 -07:00
David Heidelberg
3cfa5569ce ARM: dts: qcom: apq8064: add support to gsbi4 uart
This patch adds support to gsbi4 uart which is used in LG Mako.

Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230814150040.64133-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-17 19:40:23 -07:00
Jakub Kicinski
c2e5f4fd11 Merge branch 'netconsole-enable-compile-time-configuration'
Breno Leitao says:

====================
netconsole: Enable compile time configuration

Enable netconsole features to be set at compilation time. Create two
Kconfig options that allow users to set extended logs and release
prepending features at compilation time.

The first patch de-duplicates the initialization code, and the second
patch adds the support in the de-duplicated code, avoiding touching two
different functions with the same change.
====================

Link: https://lore.kernel.org/r/20230811093158.1678322-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:25:44 -07:00
Breno Leitao
fad361a2ee netconsole: Enable compile time configuration
Enable netconsole features to be set at compilation time. Create two
Kconfig options that allow users to set extended logs and release
prepending features at compilation time.

Right now, the user needs to pass command line parameters to netconsole,
such as "+"/"r" to enable extended logs and version prepending features.

With these two options, the user could set the default values for the
features at compile time, and don't need to pass it in the command line
to get them enabled, simplifying the command line.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230811093158.1678322-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:25:42 -07:00
Breno Leitao
b0a9e2c9a9 netconsole: Create a allocation helper
De-duplicate the initialization and allocation code for struct
netconsole_target.

The same allocation and initialization code is duplicated in two
different places in the netconsole subsystem, when the netconsole target
is initialized by command line parameters (alloc_param_target()), and
dynamically by sysfs (make_netconsole_target()).

Create a helper function, and call it from the two different functions.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230811093158.1678322-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:25:42 -07:00
Justin Stitt
f3add6dec3 net: mdio: fix -Wvoid-pointer-to-enum-cast warning
When building with clang 18 I see the following warning:
|       drivers/net/mdio/mdio-xgene.c:338:13: warning: cast to smaller integer
|               type 'enum xgene_mdio_id' from 'const void *' [-Wvoid-pointer-to-enum-cast]
|         338 |                 mdio_id = (enum xgene_mdio_id)of_id->data;

This is due to the fact that `of_id->data` is a void* while `enum
xgene_mdio_id` has the size of an int. This leads to truncation and
possible data loss.

Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230815-void-drivers-net-mdio-mdio-xgene-v1-1-5304342e0659@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:25:40 -07:00
Jakub Kicinski
0c2d8227ba Merge branch 'netem-use-a-seeded-prng-for-loss-and-corruption-events'
François Michel says:

====================
netem: use a seeded PRNG for loss and corruption events

In order to reproduce bugs or performance evaluation of
network protocols and applications, it is useful to have
reproducible test suites and tools. This patch adds
a way to specify a PRNG seed through the
TCA_NETEM_PRNG_SEED attribute for generating netem
loss and corruption events. Initializing the qdisc
with the same seed leads to the exact same loss
and corruption patterns. If no seed is explicitly
specified, the qdisc generates a random seed using
get_random_u64().

This patch can be and has been tested using tc from
the following iproute2-next fork:
https://github.com/francoismichel/iproute2-next

For instance, setting the seed 42424242 on the loopback
with a loss rate of 10% will systematically drop the 5th,
12th and 24th packet when sending 25 packets.
====================

Link: https://lore.kernel.org/r/20230815092348.1449179-1-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:15:08 -07:00
François Michel
3cad70bc74 netem: use seeded PRNG for correlated loss events
Use prandom_u32_state() instead of get_random_u32() to generate
the correlated loss events of netem.

Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-4-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:15:06 -07:00
François Michel
9c87b2aecc netem: use a seeded PRNG for generating random losses
Use prandom_u32_state() instead of get_random_u32() to generate
the random loss events of netem. The state of the prng is part
of the prng attribute of struct netem_sched_data.

Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-3-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17 19:15:05 -07:00