Commit graph

1,233,452 commits

Author SHA1 Message Date
Rob Herring
b8678ca577
ARM: sti: Drop unused includes
Several includes are not needed, so drop them.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-2-d8de2cc88bff@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12 10:30:59 +02:00
Rob Herring
c0b736d3b5
ARM: l2x0: Add explicit includes for init and types
The cache-l2x0.h header uses u32 type and the __init and __iomem
attributes, so it should have explicit includes for those.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-1-d8de2cc88bff@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12 10:30:54 +02:00
Lin Yujun
42ff49a196
ARM: dts: integrator: fix PCI bus dtc warnings
An warning is reported when allmodconfig is used to compile the kernel of the ARM architecture:

arch/arm/boot/dts/arm/integratorap.dts:161.22-206.4: Warning (pci_bridge): /pciv3@62000000: node name is not "pci" or "pcie"

Change the node name to pci to clear the build warning.

Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230811-versatile-dts-v6-6-v1-1-d8cb9d1947ed@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12 10:14:16 +02:00
Arnd Bergmann
d842f4dc68 ARM: Zynq SoC changes for v6.6
- Sort out OF headers in pm.c
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZMzcuAAKCRDKSWXLKUoM
 IeNlAJ9ZxrC2yUdxxev+51vmVMHs32xbzwCfaLkDev0tR1XXUpQdEdzs52z3Dws=
 =QVnR
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTXPxgACgkQYKtH/8kJ
 UifuHg/6Aso7qoXlCW377qH7JK5q6opqH24O5sE6uAm4SJ9BKYP/eCuzO54LGMaO
 fsls0pIV19zL/kyjoKGYsZYCjWOagNnP2hHhF4MGaj+coV6SnDyL//xwa2GSDe3i
 7wybMUDG3+2f1dnBuoZz4+vZXOs4Z7fzA9q/Vh4AhaGVPRSwfYjwMpiK2T7KWgc/
 WdxvaYywCArhpS6MgWEh1eYAdXlePI3dal+ogqzhl67+9El5UtSGX86EuszIPaOi
 OBrN9XCkuHMkcBN9zrfxeHWLfybFR5VbZXCZYyNEnGppifPDlH1aSrJ5v4oR3iiz
 eWdDpPbhRoe+t6N1GpXpyH+WobRmYHbxdf+y/KG7RIUNswEzGIY2VT/1+C8EcuVx
 3bmhqBumH6w3Th6MA7FEUSzHo3sMO2O5ngT0Uj4J1sHnxzn6SnHVRibsp8d1Ua+P
 0Jb0oYFM3Sg638sV62BHD18dKXPwlRowIad0zMCyLFBScTIJT+mWqHHVc5/NDZIV
 8pjyjfRnX16CevBTF0cRdS6ynCuf1UavwqBW1kCpXwd/2Tv8iUrmA2IHi+J7/X5K
 FYOb22hs4qdqnN8znMB0MWsUwNeduTsn1HKisRmDh3+IXuTXumTOzBqIZIz6mxa8
 3d0tAD4dU1U8/MAyBtMuAYdKC8exFqjzHo2Amjz4ESk2e9f6ZS8=
 =QcvG
 -----END PGP SIGNATURE-----

Merge tag 'zynq-soc-for-6.6' of https://github.com/Xilinx/linux-xlnx into arm/fixes

ARM: Zynq SoC changes for v6.6

- Sort out OF headers in pm.c

* tag 'zynq-soc-for-6.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Explicitly include correct DT includes

Link: https://lore.kernel.org/r/a56457a0-7e5a-df46-2c86-3f2ace578984@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12 10:13:12 +02:00
Arnd Bergmann
991e0d9dbb i.MX fixes for 6.5, 2nd round:
- Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU
   memory area.
 - Fix RTC interrupt level on imx6qdl-phytec-mira board.
 - Remove LDB endpoint from from the common imx6sx.dtsi as it causes
   regression for boards that has the LCDIF connected directly to
   a parallel display.
 - Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree
   to avoid overclocking.
 - Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix
   a tuning failure seen with some SD cards.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmTTYzIUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5THQf/bDZP+YPT8RxUdxVdL6jT2GGHR3t8
 wq3+vM1KVgg+1E9nMBcG0aT1fUTvPM22N5Ae72bGYd69HGbqS64UJ37JlvrSXfwW
 QtJHPb9mbDPsdyoLbWBuJq3bdY6NgdbzeKEEGRWlZAkJqvB5a1S63g3riJO89inp
 mMsm0dFGn7IZFkhflMtMFL9T0FOz4IwbJGBCm5WvRCR/5nH82MJe5w9JfWBGoRPY
 Y0+vm8bS8A/hjQrYVWyAxe1sRAjxNNPWEsjelY/F89gpqOcuBrTTFVmMhEVKX6sd
 BjgCQFFWzds4ezmTNloMTyB4dSnW/q2Nsg87A9MXVECW6eIzAeO9p2dINA==
 =pxhp
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTXPu4ACgkQYKtH/8kJ
 UieZnRAAnbxsC6/NT7qOwo/d6+hfX2Nh7Tgy9MDLBwIGtzdR822SD0WKwYRIb0K/
 iMQMt+6ItPcYDKOLUXKv1MY3QX3BcirvE4yDyPGVxgcnkmL1egeUlYJ4R2U8QnOq
 Vwn+cqAcA6RSQIYEV0w32gXHjeDBMdsToT+DlV7id5C6QyreQEkSRzrqf0zm1CTF
 zNWCXeaaLkTV+j7W4fb3yPhSMhnnfkwmZB3lVVd5K/vwt7x3OQc7WaSQVNPAcGTC
 jiWsbW5KF4HbcukUpb16hyxyyJlt94FxrqqUyN86mj/ONBS55Hf7ilgZX4x/KphG
 PJ2V7fnCDnrhIWVEUlknMxLZmPUXTMqaSVsXrx0JOOz+y3KSq6lZudswXPK5fvbV
 WGZw9YpC/Hm3hN7Xi+BBUZVJGB7r9pyjcZUcUZBqK1EOxDSRiDMogyC55cC6C6Z2
 uX4AfntpeDskj1nUtAgXK38bM1NLQ/jQnkZPVV69qpSkRQK/zLBwNuTSDUtW42vM
 ftbbSIyN4tEBQD5bmXy01ug7qxFJaeRQ9dW44UH03zYvDlH5QTrRM64tmySKIRZ+
 urab1ShoN0UNA7t9PFpj45bbLb9sndeI6EOh0Vi8RozQ+dCEq1I6HFt54K886qar
 sjcsnrJxMZysZnoGGf3q1REe3NjuQ1gRd2nwg4Rbj7VkytuInWI=
 =3ZEY
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.5, 2nd round:

- Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU
  memory area.
- Fix RTC interrupt level on imx6qdl-phytec-mira board.
- Remove LDB endpoint from from the common imx6sx.dtsi as it causes
  regression for boards that has the LCDIF connected directly to
  a parallel display.
- Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree
  to avoid overclocking.
- Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix
  a tuning failure seen with some SD cards.

* tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx93: Fix anatop node size
  ARM: dts: imx: Set default tuning step for imx6sx usdhc
  arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
  arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
  ARM: dts: imx: Set default tuning step for imx7d usdhc
  ARM: dts: imx6: phytec: fix RTC interrupt level
  ARM: dts: imx6sx: Remove LDB endpoint

Link: https://lore.kernel.org/r/20230809100034.GS151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12 10:12:29 +02:00
Alan Stern
55c3e571d2 USB: gadget: f_mass_storage: Fix unused variable warning
Fix a "variable set but not used" warning in f_mass_storage.c.  rc is
used if	verbose debugging is enabled but not otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: d5e2b67aae ("USB: g_mass_storage: template f_mass_storage.c file created")
Link: https://lore.kernel.org/r/cfed16c7-aa46-494b-ba84-b0e0dc99be3a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:06:12 +02:00
Alan Stern
159a98afc8 USB: gadget: core: Add missing kerneldoc for vbus_work
Add a missing kerneldoc description of the vbus_work field in struct usb_udc.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 50966da807 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
Link: https://lore.kernel.org/r/1e5e7cda-b2c8-4917-9952-4354f365ede0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:06:05 +02:00
Alan Stern
59cf445754 USB: core: Fix oversight in SuperSpeed initialization
Commit 85d07c5562 ("USB: core: Unite old scheme and new scheme
descriptor reads") altered the way USB devices are enumerated
following detection, and in the process it messed up the
initialization of SuperSpeed (or faster) devices:

[   31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[   31.663107] usb 2-1: device descriptor read/8, error -71
[   31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[   31.965122] usb 2-1: device descriptor read/8, error -71
[   32.080991] usb usb2-port1: attempt power cycle
...

The problem was caused by the commit forgetting that in SuperSpeed or
faster devices, the device descriptor uses a logarithmic encoding of
the bMaxPacketSize0 value.  (For some reason I thought the 255 case in
the switch statement was meant for these devices, but it isn't -- it
was meant for Wireless USB and is no longer needed.)

We can fix the oversight by testing for buf->bMaxPacketSize0 = 9
(meaning 512, the actual maxpacket size for ep0 on all SuperSpeed
devices) and straightening out the logic that checks and adjusts our
initial guesses of the maxpacket value.

Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 85d07c5562 ("USB: core: Unite old scheme and new scheme descriptor reads")
Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:06:01 +02:00
Alan Stern
5198c0eeb8 USB: core: Fix unused variable warning in usb_alloc_dev()
The kernel test robot reported that a recent commit caused a "variable
set but not used" warning.  As a result of that commit, the variable
no longer serves any purpose; it should be removed.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308092350.HR4PVHUt-lkp@intel.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 1e4c574225 ("USB: Remove remnants of Wireless USB and UWB")
Link: https://lore.kernel.org/r/7223cc66-f006-42ae-9f30-a6c546bf97a7@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:03:37 +02:00
Xu Yang
c272dabf2d usb: host: ehci-sched: try to turn on io watchdog as long as periodic_count > 0
If initially isoc_count = 0, periodic_count > 0 and the io watchdog is
not started (e.g. just timed out), then the io watchdog may not run after
submitting isoc urbs and enable_periodic(). The isoc urbs may not complete
forever if the controller had already stopped periodic schedule.

This will try to call turn_on_io_watchdog() for each enable_periodic() to
ensure the io watchdog functions properly.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230809065327.952368-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:03:22 +02:00
Yang Yingliang
3ddde5aa43 USB: ohci-sm501: remove unnecessary check of mem
The resource is checked in probe function, so there is
no need do this check in remove function.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230809085348.2761782-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:03:16 +02:00
Ruan Jinjie
bb8dc3df68 usb: gadget/snps_udc_plat: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. Remove of_match_ptr() and CONFIG_OF.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230809084849.2410477-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12 10:03:13 +02:00
Daniel T. Lee
6da4fea89d bpftool: fix perf help message
Currently, bpftool perf subcommand has typo with the help message.

    $ tools/bpf/bpftool/bpftool perf help
    Usage: bpftool perf { show | list }
           bpftool perf help }

Since this bpftool perf subcommand help message has the extra bracket,
this commit fix the typo by removing the extra bracket.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230811121603.17429-1-danieltimlee@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-11 20:54:29 -07:00
Yue Haibing
01b8539655 bpf: Remove unused declaration bpf_link_new_file()
Commit a3b80e1078 ("bpf: Allocate ID for bpf_link")
removed the implementation but not the declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230809140556.45836-1-yuehaibing@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-08-11 20:39:40 -07:00
Linus Torvalds
f8de32cc06 Hi,
These change the probing and enabling of interrupts advertised by the
 platform firmware (i.e. ACPI, Device Tree) to tpm_tis as an opt-in,
 which can be set from the kernel command-line.
 
 BR, Jarkko
 -----BEGIN PGP SIGNATURE-----
 
 iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZNbL6RIcamFya2tvQGtl
 cm5lbC5vcmcACgkQGnq6IXRrq9LMaQEAtHmqTq4TjuKPFBy3R3WC883KCkE0Dd9Z
 Lm2hXwVjjj0A/2i9ucqQbDoPoFOBS4B/mH9NN/7M2K50tn0Ia35csQgA
 =YQ5W
 -----END PGP SIGNATURE-----

Merge tag 'tpmdd-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm irq fixes from Jarkko Sakkinen:
 "These change the probing and enabling of interrupts advertised by the
  platform firmware (i.e. ACPI, Device Tree) to be an opt-in for tpm_tis,
  which can be set from the kernel command-line.

  Note that the opt-in change is only for the PC MMIO tpm_tis module. It
  does not affect other similar drivers using IRQs, like tpm_tis_spi and
  synquacer"

* tag 'tpmdd-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm_tis: Opt-in interrupts
  tpm: tpm_tis: Fix UPX-i11 DMI_MATCH condition
2023-08-11 19:46:04 -07:00
Linus Torvalds
9a20704fb4 v6.5 second rc RDMA pull request
Few small bugs:
 
 - Fix longstanding mlx5 bug where ODP would fail with certain MR alignments
 
 - cancel work to prevent a hfi1 UAF
 
 - MAINTAINERS update
 
 - UAF, missing mutex_init and an error unwind bug in bnxt_re
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZNU9zQAKCRCFwuHvBreF
 YaG/AQDZqytJ6FtlTowtsVbv87h+xPF8qmiVlqJs+bQnO9hc+gD/TtaavpYHpafY
 2yvZUKkoukoRo5w+3Kzz4ZMSStSXwgY=
 =0p9M
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "A few small bugs:

   - Fix longstanding mlx5 bug where ODP would fail with certain MR
     alignments

   - cancel work to prevent a hfi1 UAF

   - MAINTAINERS update

   - UAF, missing mutex_init and an error unwind bug in bnxt_re"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/bnxt_re: Initialize dpi_tbl_lock mutex
  RDMA/bnxt_re: Fix error handling in probe failure path
  RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF
  MAINTAINERS: Remove maintainer of HiSilicon RoCE
  IB/hfi1: Fix possible panic during hotplug remove
  RDMA/umem: Set iova in ODP flow
2023-08-11 19:39:01 -07:00
Guido Günther
95afa02c9e arm64: defconfig: Enable Redpine 91X wlan driver
The Librem 5 and it's devkit have it connected via SDIO.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 10:00:25 +08:00
Guido Günther
60ac8a775a arm64: dts: imx8mq-librem5-devkit: Drop power-supply
It's not a valid binding. Instead move the sdio_rst line to the power
sequence and use w_disable1 as the vmmc-supply bringing it more in line
with other SDIO M2 cards.

Resolves following warning:

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: mmc@30b50000: Unevaluated properties are not allowed ('power-supply' was unexpected)
        from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#

Reported-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 10:00:05 +08:00
Guido Günther
74cec60c0e arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
Otherwise the A53 cores are shut down which doesn't end well.

Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 09:59:28 +08:00
Harshit Mogalapalli
5976a28b34 drm/loongson: Fix error handling in lsdc_pixel_pll_setup()
There are two problems in lsdc_pixel_pll_setup()
1. If kzalloc() fails then call iounmap() to release the resources.
2. Both kzalloc and ioremap does not return error pointers on failure, so
   using IS_ERR_OR_NULL() checks is a bit confusing and not very right,
   fix this by changing those to NULL checks instead.

Fixes: f39db26c54 ("drm: Add kms driver for loongson display controller")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
2023-08-12 09:58:07 +08:00
Alexander Stein
db92a8d917 ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
Numbers are separated by dashes. Fixes the warnings:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: gpio-buttons: 'button1',
 'button2', 'button3' do not match any of the regexes:
 '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
 from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 09:45:11 +08:00
Alexander Stein
1d6500cd39 ARM: dts: imx6ul: Fix nand-controller #size-cells
nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dtb:
 nand-controller@1806000: #size-cells:0:0: 0 was expected
 from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 09:43:26 +08:00
Alexander Stein
ce0bc19e50 ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
interrupt-controller is only valid for gpio subnode, remove it.
Rename touchscreen subnode according to bindings.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12 09:42:43 +08:00
Linus Torvalds
0725a70411 zonefs fixes for 6.5-rc6
- The switch to using iomap for executing direct synchronous write to
    sequential files using zone append BIO overlooked cases where the BIO
    built by iomap is too large and needs splitting, which is not allowed
    with zone append. Fix this by using regular write commands instead.
    The use of zone append commands will be reintroduces later with
    proper support from iomap.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZNbIugAKCRDdoc3SxdoY
 dgGZAQCJWVBGXP/FAB4o7ifuqZ9xDjcf0RyrYrcS1N+kV1REqgD/ZnHXxAbNJNtx
 A3A5W7bFQJogNp/gWR7K7/jt1cRNwgo=
 =nlBY
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull zonefs fix from Damien Le Moal:

 - The switch to using iomap for executing a direct synchronous write to
   sequential files using a zone append BIO overlooked cases where the
   BIO built by iomap is too large and needs splitting, which is not
   allowed with zone append.

   Fix this by using regular write commands instead. The use of zone
   append commands will be reintroduced later with proper support from
   iomap.

* tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix synchronous direct writes to sequential files
2023-08-11 18:35:56 -07:00
Linus Torvalds
5512c33c7b hwmon fixes for v6.5-rc6
* Fix sporadic comunication errors in pmbus/bel-pfe and
   aquacomputer_d5next drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmTWvZUACgkQyx8mb86f
 mYGwjA/+OsXkdz90jsZ+JdJSUuqWsr5kGwEEWHZzPFizxnHw8/EeMiEdhwPwN8Wm
 SBlqXPWs0FiAZaQ/oWJEXPg0Lw6hQ8uIAds99USUpYWu0uQMyg6GeIq+14u+EbR0
 LpvjVr/TY4x4v6KeQBHxUfhc2b7x9Tk+XfUFs2m21nnv+TmrvWONqKVCXCYmKXTQ
 f0wrErxcznwguj6aD7CrYQRdXfXk2LX6kgxPqFAlsbBLALceA0OpgnWZrAM00de+
 ChnoOxZ+kSfNeZvDk6eXGMJDcR/N7z98y2/qWZNqtGNxhzMUoGKROQlbyovVLbVw
 dmmThs2IKWLa8CUcQG4tyAYHQr7KoZN+uMdwoMII9+eB5fCC48Po0vqZz993Fxo0
 tX5FGZnifigLKL30dpU2q7wfPzdIC/xmbibTjS5klnEFD5zrPPRf1bgsa4EnaPsh
 2ZlpiMJLtEM8b1LjjYydhdLoi+EerpHr9wilaiYnhKTnraeD4lQAPCU4yeBYZHza
 R9mfqgXtfoUzKkiY3odGTfhjsahkUxPn5C0+Dt29ON4hQcLig08UqByDaM2S5PVb
 qPjBinLaD3/RYPADxMRWJwZvwUkoq7bIWu62mxnPBwmvURz211T4s9Hnfrxo8/fc
 pUVXlqM2s+5TUuCv3l/Wj8BLtBIPzxOskVdANOw3RlTT2+ymKG0=
 =z7ER
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix sporadic comunication errors in pmbus/bel-pfe and
   aquacomputer_d5next drivers

* tag 'hwmon-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl report
  hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100
2023-08-11 18:30:29 -07:00
Jakub Kicinski
3e6860ec3a Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
i40e: Replace one-element arrays with flexible-array members

Replace one-element arrays with flexible-array members in multiple
structures.

This results in no differences in binary output.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  i40e: Replace one-element array with flex-array member in struct i40e_profile_aq_section
  i40e: Replace one-element array with flex-array member in struct i40e_section_table
  i40e: Replace one-element array with flex-array member in struct i40e_profile_segment
  i40e: Replace one-element array with flex-array member in struct i40e_package_header
====================

Link: https://lore.kernel.org/r/20230810175302.1964182-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11 18:24:14 -07:00
Arnd Bergmann
7191c140fa ethernet: atarilance: mark init function static
The init function is only referenced locally, so it should be static to
avoid this warning:

drivers/net/ethernet/amd/atarilance.c:370:28: error: no previous prototype for 'atarilance_probe' [-Werror=missing-prototypes]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230810122528.1220434-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11 18:24:02 -07:00
Arnd Bergmann
ea6f782fe5 ethernet: ldmvsw: mark ldmvsw_open() static
The function is exported for no reason and should just be static:

drivers/net/ethernet/sun/ldmvsw.c:127:5: error: no previous prototype for 'ldmvsw_open' [-Werror=missing-prototypes]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230810122528.1220434-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11 18:24:02 -07:00
Jarkko Sakkinen
6aaf663ee0 tpm_tis: Opt-in interrupts
Cc: stable@vger.kernel.org # v6.4+
Link: https://lore.kernel.org/linux-integrity/CAHk-=whRVp4h8uWOX1YO+Y99+44u4s=XxMK4v00B6F1mOfqPLg@mail.gmail.com/
Fixes: e644b2f498 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-08-12 02:36:28 +03:00
Peter Ujfalusi
51e5e551af tpm: tpm_tis: Fix UPX-i11 DMI_MATCH condition
The patch which made it to the kernel somehow changed the
match condition from
DMI_MATCH(DMI_PRODUCT_NAME, "UPX-TGL01")
to
DMI_MATCH(DMI_PRODUCT_VERSION, "UPX-TGL")

Revert back to the correct match condition to disable the
interrupt mode on the board.

Cc: stable@vger.kernel.org # v6.4+
Fixes: edb13d7bb0 ("tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11")
Link: https://lore.kernel.org/lkml/20230524085844.11580-1-peter.ujfalusi@linux.intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-08-12 02:36:28 +03:00
Ruan Jinjie
656ae4f48a staging: fieldbus: arcx-anybus: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230811024945.2256437-2-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11 23:28:04 +02:00
Alexon Oliveira
6a889dc7d8 staging: vme_user: fix alignment of open parenthesis
Fixed all CHECK: Alignment should match open parenthesis
as reported by checkpatch to adhere to the Linux kernel
coding-style guidelines.

Signed-off-by: Alexon Oliveira <alexondunkan@gmail.com>
Link: https://lore.kernel.org/r/ZNO6HohffQlbh7jn@alolivei-thinkpadt480s.gru.csb
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11 23:27:19 +02:00
Linus Torvalds
190bf7b14b 14 hotfixes. 11 of these are cc:stable and the remainder address post-6.4
issues, or are not considered suitable for -stable backporting.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZNad/gAKCRDdBJ7gKXxA
 jmw6AP9u6k8XcS8ec3/u0IUEuh7ckHx5Vvjfmo5YgWlIJDeWegD9G2fh3ZJgcjMO
 jMssklfXmP+QSijCIxUva1TlzwtPDAQ=
 =MqiN
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes. 11 of these are cc:stable and the remainder address
  post-6.4 issues, or are not considered suitable for -stable
  backporting"

* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/damon/core: initialize damo_filter->list from damos_new_filter()
  nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
  selftests: cgroup: fix test_kmem_basic false positives
  fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
  MAINTAINERS: add maple tree mailing list
  mm: compaction: fix endless looping over same migrate block
  selftests: mm: ksm: fix incorrect evaluation of parameter
  hugetlb: do not clear hugetlb dtor until allocating vmemmap
  mm: memory-failure: avoid false hwpoison page mapped error info
  mm: memory-failure: fix potential unexpected return value from unpoison_memory()
  mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
  radix tree test suite: fix incorrect allocation size for pthreads
  crypto, cifs: fix error handling in extract_iter_to_sg()
  zsmalloc: fix races between modifications of fullness and isolated
2023-08-11 14:19:20 -07:00
Mitchell Levy
4f74fb30ea hv_balloon: Update the balloon driver to use the SBRM API
This patch is intended as a proof-of-concept for the new SBRM
machinery[1]. For some brief background, the idea behind SBRM is using
the __cleanup__ attribute to automatically unlock locks (or otherwise
release resources) when they go out of scope, similar to C++ style RAII.
This promises some benefits such as making code simpler (particularly
where you have lots of goto fail; type constructs) as well as reducing
the surface area for certain kinds of bugs.

The changes in this patch should not result in any difference in how the
code actually runs (i.e., it's purely an exercise in this new syntax
sugar). In one instance SBRM was not appropriate, so I left that part
alone, but all other locking/unlocking is handled automatically in this
patch.

[1] https://lore.kernel.org/all/20230626125726.GU4253@hirez.programming.kicks-ass.net/

Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: "Mitchell Levy (Microsoft)" <levymitchell0@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230807-sbrm-hyperv-v2-1-9d2ac15305bd@gmail.com
2023-08-11 21:04:42 +00:00
Bryan Brattlof
935c4047d4 arm64: dts: ti: Add support for the AM62P5 Starter Kit
Add basic support for the AM62P5 SK with UART console and
ramdisk as rootfs.

Schematics is at https://www.ti.com/lit/zip/sprr487

Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230811184432.732215-4-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 16:04:24 -05:00
Bryan Brattlof
29075cc09f arm64: dts: ti: Introduce AM62P5 family of SoCs
The AM62Px is an extension of the existing Sitara AM62x low-cost family
of application processors built for Automotive and Linux Application
development. Scalable Arm Cortex-A53 performance and embedded features,
such as: multi high-definition display support, 3D-graphics
acceleration, 4K video acceleration, and extensive peripherals make the
AM62Px well-suited for a broad range of automation and industrial
application, including automotive digital instrumentation, automotive
displays, industrial HMI, and more.

Some highlights of AM62P SoC are:
* Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster.
  Dual/Single core variants are provided in the same package to allow HW
  compatible designs.
* One Device manager Cortext-R5F for system power and resource
  management, and one Cortex-R5F for Functional Safety or
  general-purpose usage.
* One 3D GPU up to 50 GLFOPS
* H.264/H.265 Video Encode/Decode.
* Display support: 3x display support over OLDI/LVDS (1x OLDI-DL, 1x or
  2x OLDI-SL), DSI, or DPI. Up to 3840x1080@60fps resolution
* Integrated Giga-bit Ethernet switch supporting up to a total of two
  external ports (TSN capable).
* 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3xMMC and SD, GPMC for
  NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio,
  1xCSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals.
* Dedicated Centralized Hardware Security Module with support for secure
  boot, debug security and crypto acceleration and trusted execution
  environment.
* One 32-bit DDR Subsystem that supports LPDDR4, DDR4 memory types.
* Multiple low power modes support, ex: Deep sleep, Standby, MCU-only,
  enabling battery powered system design.

For those interested, more details about this SoC can be found in the
Technical Reference Manual here:

    https://www.ti.com/lit/pdf/spruj83

Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230811184432.732215-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 16:02:37 -05:00
Bryan Brattlof
b57fc5cbdb dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
Add bindings for TI's AM62P5 family of devices.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230811184432.732215-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 16:02:37 -05:00
Vignesh Raghavendra
443012dd31 soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
This adds JTAG ID info for the AM62PX so as to enable SoC detection in
kernel.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230811170127.250733-1-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 16:01:09 -05:00
Apurva Nandan
68501d3cc1 arm64: dts: ti: k3-am69-sk: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

wkup_i2c0, mcu_uart0, main_uart8, main_sdhci0 and main_sdhci1 are required
for bootloader operation on TI K3 AM69-SK EVM. These IPs along with
pinmuxes need to be marked for all bootloader phases, hence add bootph-all
to these nodes in kernel dts.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-4-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:54:18 -05:00
Apurva Nandan
c74d8de338 arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

wkup_i2c0, mcu_uart0, main_uart8, fss, ospi0, ospi1, main_sdhci0 and
main_sdhci1 are required for bootloader operation on TI K3 J784S4 EVM.
These IPs along with pinmuxes need to be marked for all bootloader phases,
hence add bootph-all to these nodes in kernel dts.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-3-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:54:18 -05:00
Apurva Nandan
3a40869856 arm64: dts: ti: k3-j784s4: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

On TI K3 J784S4 SoC, only secure_proxy_mcu and secure_proxy_sa3 nodes are
exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are
used by later boot stages also.

And secure_proxy_mcu and secure_proxy_sa3 are disabled in kernel device
tree, and will be only enabled in R5 bootloader device tree.
So, bootph-pre-ram for secure_proxy_mcu and secure_proxy_sa3 will be
added in R5 bootloader device tree only.

Add bootph-all for all other nodes that are used in the bootloader on
K3 J784S4 SoC, and bootph-pre-ram is not needed specifically for any node
in kernel dts.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-2-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:54:18 -05:00
Cristian Ciocaltea
6dbef74aeb x86/cpu/amd: Enable Zenbleed fix for AMD Custom APU 0405
Commit

  522b1d6921 ("x86/cpu/amd: Add a Zenbleed fix")

provided a fix for the Zen2 VZEROUPPER data corruption bug affecting
a range of CPU models, but the AMD Custom APU 0405 found on SteamDeck
was not listed, although it is clearly affected by the vulnerability.

Add this CPU variant to the Zenbleed erratum list, in order to
unconditionally enable the fallback fix until a proper microcode update
is available.

Fixes: 522b1d6921 ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230811203705.1699914-1-cristian.ciocaltea@collabora.com
2023-08-11 22:52:29 +02:00
Aradhya Bhatia
d5c988b437 arm64: defconfig: Enable ITE_IT66121 HDMI transmitter
Enable CONFIG_DRM_ITE_IT66121.

ILITEK ITE-IT66121 is an HDMI transmitter, which takes parallel video
signals (DPI) as input. It is being used on TI's AM625 SoC based
BeaglePlay platform[0].

[0]: https://beagleboard.org/play

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-7-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:47:15 -05:00
Nishanth Menon
1f7226a5e5 arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
The DSS outputs DPI signals via its second video port (VP2). The DPI
output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
transmitter (ITE-IT66121) on the BeaglePlay platform. For audio output,
BeaglePlay uses mcasp1.

Add pinmux info for DSS DPI signals.

Further, add support for HDMI audio and video output.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-6-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:31:51 -05:00
Jai Luthra
b50ccab9e0 arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
Enable audio output over HDMI instead of the 3.5mm jack.

A FET switch (U65) on the EVM muxes serial audio lines coming from McASP
between the codec (tlv320aic3106) and the HDMI bridge (sii9022).

By default it uses the codec, but it can be toggled to use the HDMI
bridge by shorting a (J24) header on the board.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
[a-bhatia1: Cosmetic changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-5-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:31:51 -05:00
Aradhya Bhatia
db6e8237cf arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
The DSS outputs DPI signals via its second video port (VP2). The DPI
output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
transmitter (SIL9022) on the board.

Add pinmux info for DSS DPI output.

Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector
on the AM625 SK and AM62-LP SK platforms.

Additionally, connect the output of DSS (VP2) with input of the HDMI TX,
and the output of HDMI TX to the input of the HDMI connector.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-4-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:31:51 -05:00
Aradhya Bhatia
8ccc1073c7 arm64: dts: ti: k3-am62-main: Add node for DSS
Add Display SubSystem (DSS) DT node for the AM625 SoC.

The DSS supports one each of video pipeline (vid) and video-lite
pipeline (vidl1). It outputs OLDI signals on one video port (VP1) and
DPI signals on another (VP2). The video ports are connected to the
pipelines via 2 identical overlay managers (ovr1 and ovr2).

Also add the DT node for DSS clock divider. This is a fixed-factor-clock
and does not have any register. This comes into effect whenenver OLDI
display is used. The input to this divider is a serial clock used by
OLDI TXes. The divider divides the input clock by 7, and provides the
pixel clock to VP1.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-3-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:31:51 -05:00
Aradhya Bhatia
73387da70f arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
The Display Data Channel (DDC) transactions between an HDMI transmitter
(SIL9022A in this case) and an HDMI monitor, occur at a maximum of
100KHz. That's the maximum supported frequency within DDC standards.

While the SIL9022A can transact with the core at 400KHz, it needs to
drop the frequency to 100KHz when communicating with the monitor,
otherwise, the i2c controller times out and shows warning like this.

[  985.773431] omap_i2c 20010000.i2c: controller timed out

That feature, however, has not been enabled in the SIL9022 driver.

Since, dropping the frequency doesn't affect any other devices on the
bus, drop the main-i2c1 frequency from 400KHz to 100KHz.

Fixes: a841581451 ("arm64: dts: ti: Refractor AM625 SK dts")
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-2-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11 15:31:51 -05:00
Linus Walleij
232ba1630c openrisc: Make pfn accessors statics inlines
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.

For symmetry, do the same with pfn_to_virt().

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-11 21:27:02 +01:00
Gokul krishna Krishnakumar
f9eac7e029 dt-bindings: firmware: qcom: scm: Updating VMID list
Adding the full list of VMID's, which are used by different clients to
pass to the secure world.

Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230403204455.6758-1-quic_gokukris@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11 13:10:59 -07:00