Since commit 2e45528930 ("iommu/vt-d: Unify the way to process DMAR
device scope array") this is not used anymore, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230802133934.19712-1-yuehaibing@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the case that VT-d page is smaller than mm page, converting dma pfn
should be handled in two cases which are for start pfn and for end pfn.
Currently the calculation of end dma pfn is incorrect and the result is
less than real page frame number which is causing the mapping of iova
always misses some page frames.
Rename the mm_to_dma_pfn() to mm_to_dma_pfn_start() and add a new helper
for converting end dma pfn named mm_to_dma_pfn_end().
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230625082046.979742-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Even the PCI devices don't support pasid capability, PASID table is
mandatory for a PCI device in scalable mode. However flushing cache
of pasid directory table for these devices are not taken after pasid
table is allocated as the "size" of table is zero. Fix it by
calculating the size by page order.
Found this when reading the code, no real problem encountered for now.
Fixes: 194b3348bd ("iommu/vt-d: Fix PASID directory pointer coherency")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230616081045.721873-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The core code now prevents devices with RMRR regions from being assigned
to user space. There is no need to check for this condition in individual
drivers. Remove it to avoid duplicate code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230724060352.113458-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU_RESV_DIRECT flag indicates that a memory region must be mapped
1:1 at all times. This means that the region must always be accessible to
the device, even if the device is attached to a blocking domain. This is
equal to saying that IOMMU_RESV_DIRECT flag prevents devices from being
attached to blocking domains.
This also implies that devices that implement RESV_DIRECT regions will be
prevented from being assigned to user space since taking the DMA ownership
immediately switches to a blocking domain.
The rule of preventing devices with the IOMMU_RESV_DIRECT regions from
being assigned to user space has existed in the Intel IOMMU driver for
a long time. Now, this rule is being lifted up to a general core rule,
as other architectures like AMD and ARM also have RMRR-like reserved
regions. This has been discussed in the community mailing list and refer
to below link for more details.
Other places using unmanaged domains for kernel DMA must follow the
iommu_get_resv_regions() and setup IOMMU_RESV_DIRECT - we do not restrict
them in the core code.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/linux-iommu/BN9PR11MB5276E84229B5BD952D78E9598C639@BN9PR11MB5276.namprd11.prod.outlook.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20230724060352.113458-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Kernel workqueues were disabled due to flawed use of kernel VA and SVA
API. Now that we have the support for attaching PASID to the device's
default domain and the ability to reserve global PASIDs from SVA APIs,
we can re-enable the kernel work queues and use them under DMA API.
We also use non-privileged access for in-kernel DMA to be consistent
with the IOMMU settings. Consequently, interrupt for user privilege is
enabled for work completion IRQs.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Tested-by: Tony Zhu <tony.zhu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-9-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the upper layers to set a domain to a PASID of a device
if the PASID feature is supported by the IOMMU hardware. The typical
use cases are, for example, kernel DMA with PASID and hardware
assisted mediated device drivers.
The attaching device and pasid information is tracked in a per-domain
list and is used for IOTLB and devTLB invalidation.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-8-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain_flush_pasid_iotlb() helper function is used to flush the IOTLB
entries for a given PASID. Previously, this function assumed that
RID2PASID was only used for the first-level DMA translation. However, with
the introduction of the set_dev_pasid callback, this assumption is no
longer valid.
Add a check before using the RID2PASID for PASID invalidation. This check
ensures that the domain has been attached to a physical device before
using RID2PASID.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-7-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently draining page requests and responses for a pasid is part of SVA
implementation. This is because the driver only supports attaching an SVA
domain to a device pasid. As we are about to support attaching other types
of domains to a device pasid, the prq draining code becomes generic.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-6-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid_mutex was used to protect the paths of set/remove_dev_pasid().
It's duplicate with iommu_sva_lock. Remove it to avoid duplicate code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-5-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d spec requires to use PASID-based-IOTLB invalidation descriptor
to invalidate IOTLB and the paging-structure caches for a first-stage
page table. Add a generic helper to do this.
RID2PASID is used if the domain has been attached to a physical device,
otherwise real PASIDs that the domain has been attached to will be used.
The 'real' PASID attachment is handled in the subsequent change.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-4-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel ENQCMD requires a single PASID to be shared between multiple
devices, as the PASID is stored in a single MSR register per-process
and userspace can use only that one PASID.
This means that the PASID allocation for any ENQCMD using device driver
must always come from a shared global pool, regardless of what kind of
domain the PASID will be used with.
Split the code for the global PASID allocator into
iommu_alloc/free_global_pasid() so that drivers can attach non-SVA
domains to PASIDs as well.
This patch moves global PASID allocation APIs from SVA to IOMMU APIs.
Reserved PASIDs, currently only RID_PASID, are excluded from the global
PASID allocation.
It is expected that device drivers will use the allocated PASIDs to
attach to appropriate IOMMU domains for use.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-3-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).
For each device/RID, 0 is a special PASID for the normal DMA (no
PASID). This is universal across all architectures that supports PASID,
therefore warranted to be reserved globally and declared in the common
header. Consequently, we can avoid the conflict between different PASID
use cases in the generic code. e.g. SVA and DMA API with PASIDs.
This paved away for device drivers to choose global PASID policy while
continue doing normal DMA.
Noting that VT-d could support none-zero RID/NO_PASID, but currently not
used.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-2-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to ccu_mp, if the current parent rate allows getting the ideal
rate, prefer to not change the parent clock's rate.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-11-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Selecting the closest rate for pll-video0 instead of the closest rate
that is less than the requested rate has no downside for this clock,
while allowing for selecting a more suitable rate, e.g. for the
connected panels.
Furthermore, the algorithm that sets an NKM clock's parent benefits from
the closest rate. Without it, the NKM clock's rate might drift away from
the requested rate in the multiple successive calls to
ccu_nkm_determine_rate that the clk framework performs when setting a
clock rate.
Therefore, configure pll-video0 and, in consequence, all of its
descendents to select the closest rate.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-10-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add initalization macros for divisor clocks with mux
(SUNXI_CCU_M_WITH_MUX) to support finding the closest rate. This clock
type requires the appropriate flags to be set in the .common structure
(for the mux part of the clock) and the .div part.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-9-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When finding the best rate for a mux clock, consider rates that are
higher than the requested rate when CCU_FEATURE_ROUND_CLOSEST is used.
Furthermore, introduce an initialization macro that sets this flag.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-8-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When finding the best rate for a NKM clock, consider rates that are
higher than the requested rate, if the CCU_FEATURE_CLOSEST_RATE flag is
set by using the helper function ccu_is_better_rate().
Accommodate ccu_mux_helper_determine_rate to this change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-7-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Use the helper function ccu_is_better_rate() to determine the rate that
is closest to the requested rate, thereby supporting rates that are
higher than the requested rate if the clock uses the
CCU_FEATURE_CLOSEST_RATE.
Add the macro SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST which
sets CCU_FEATURE_CLOSEST_RATE.
To avoid code duplication, add the macros
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_FEAT that allows selecting
arbitrary features and use it in the original
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX as well as the newly introduced
SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST macros.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-6-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The default behaviour of clocks in the sunxi-ng driver is to select a
clock rate that is closest to but less than the requested rate.
Add the ccu_is_better_rate() helper function that - depending on the
fact if thc CCU_FEATURE_CLOSEST_RATE flag is set - decides if a rate is
closer than another rate.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-5-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The default behaviour of clocks in the sunxi-ng driver is to select a
clock rate that is closest to but less than the requested rate.
Add the CCU_FEATURE_CLOSEST_RATE flag, which can be used to allow clocks
to find the closest rate instead.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-4-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The nkm clock now supports setting the parent's rate. Utilize this
option to find the optimal rate for pll-mipi.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-3-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
In case the CLK_SET_RATE_PARENT flag is set, consider using a different
parent rate when determining a new rate.
To find the best match for the requested rate, perform the following
steps for each NKM combination:
- calculate the optimal parent rate,
- find the best parent rate that the parent clock actually supports
- use that parent rate to calculate the effective rate.
In case the clk does not support setting the parent rate, use the same
algorithm as before.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-2-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
ccu_nkm_round_rate() takes a clk_hw as parameter "hw". Since "hw" is the
nkm clock's parent clk_hw, not the clk_hw of the nkm clock itself,
change the parameter name to "parent_hw" to make it more clear what
we're dealing with.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-1-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
GDB uses /proc/PID/mem to access memory of the target process. GDB
doesn't untag addresses manually, but relies on kernel to do the right
thing.
mem_rw() of procfs uses access_remote_vm() to get data from the target
process. It worked fine until recent changes in __access_remote_vm()
that now checks if there's VMA at target address using raw address.
Untag the address before looking up the VMA.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Fixes: eee9c708cc ("gup: avoid stack expansion warning for known-good case")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are dropping the IOMMUv2 path, so no need to enable this.
It's often buggy on consumer platforms anyway.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is only required for SR-IOV world switches, but it
adds additional latency leading to reduced performance in
some benchmarks. Disable for now on bare metal.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE products don't define a `remove_stream_from_ctx` like DCN ones
do. This means that when compute_mst_dsc_configs_for_state() is called
it always returns -EINVAL which causes MST to fail to setup.
Cc: stable@vger.kernel.org # 6.4.y
Cc: Harry Wentland <Harry.Wentland@amd.com>
Reported-by: Klaus.Kusche@computerix.info
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671
Fixes: efa4c4df86 ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the gang_size check is outside of chunk parsing
loop, we need to reset i before we free the chunk data.
Suggested by Ye Zhang (@VAR10CK) of Baidu Security.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Under certain circumstances, an integer division by 0 which faults, can
leave stale quotient data from a previous division operation on Zen1
microarchitectures.
Do a dummy division 0/1 before returning from the #DE exception handler
in order to avoid any leaks of potentially sensitive data.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit reverts 5b0eea835d ("selinux: introduce an initial SID
for early boot processes") as it was found to cause problems on
distros with old SELinux userspace tools/libraries, specifically
Ubuntu 16.04.
Hopefully we will be able to re-add this functionality at a later
date, but let's revert this for now to help ensure a stable and
backwards compatible SELinux tree.
Link: https://lore.kernel.org/selinux/87edkseqf8.fsf@mail.lhotse
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Energy counter should be reported in units of 15.259 uJ. Don't apply
any conversion.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513
This is the same approach followed by DCN2 drivers where the issue is
not present.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The existing OD interface cannot support the growing demand for more
OD features. We are in the transition to a new OD mechanism. So,
disable the SMU13 OD feature support temporarily. And this should be
reverted when the new OD mechanism online.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correct the pcie width value in pp_dpm_pcie for smu 13.0.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary. Downgrade to debug instead.
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory. When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.
Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected. This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens. It's a trade-off for now.
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a callback in nbio to get pcie usage
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat SDMA/VCN/JPEG as RAS capable IP blocks in poison mode.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[1] Change pages to blocks to avoid confusion.
[2] Fix output format to align the output info.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to move irq resume to the beginning of reset sriov, or if
one interrupt occurs before irq resume, then the irq won't work anymore.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register RAS fatal error interrupt and add handler.
v2: only register NBIO RAS for dGPU platform.
change nbio_v7_9_set_ras_controller_irq_state and nbio_v7_9_set_ras_err_event_athub_irq_state
to dummy functions.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is only required for SR-IOV world switches, but it
adds additional latency leading to reduced performance in
some benchmarks. Disable for now on bare metal.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>