All *.S files under arch/s390/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-3-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-2-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Globally setting a bit in control registers is done with
smp_ctl_set_clear_bit(). This is using on_each_cpu() to execute a function
which actually sets the control register bit on each online CPU. This can
be problematic since on_each_cpu() does not prevent that new CPUs come
online while it is executed, which in turn means that control register
updates could be missing on new CPUs.
In order to prevent this problem make sure that global control register
contents cannot change until new CPUs have initialized their control
registers, and marked themselves online, so they are included in subsequent
on_each_cpu() calls.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The sof_ipc4_update_resource_usage() call updates the CPC value in basecfg
and it must be done prior to making a copy of the copier configuration
for the init message.
Other module types do the resource update as last step or in case of a
process module at the correct time, before the memcpy.
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230809125656.27585-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If cfg80211 is providing extraie's for a scanning process then ath12k will
copy that over to the firmware. The extraie.len is a 32 bit value in struct
element_info and describes the amount of bytes for the vendor information
elements.
The problem is the allocation of the buffer. It has to align the TLV
sections by 4 bytes. But the code was using an u8 to store the newly
calculated length of this section (with alignment). And the new
calculated length was then used to allocate the skbuff. But the actual
code to copy in the data is using the extraie.len and not the calculated
"aligned" length.
The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled
was 264 bytes during tests with a wifi card. But it only allocated 8
bytes (264 bytes % 256) for it. As consequence, the code to memcpy the
extraie into the skb was then just overwriting data after skb->end. Things
like shinfo were therefore corrupted. This could usually be seen by a crash
in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus
address).
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230809081241.32765-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs.
Cc: stable@vger.kernel.org
Fixes: dc1e3cb8da ("nl80211: MBSSID and EMA support in AP mode")
Signed-off-by: Keith Yeo <keithyjy@gmail.com>
Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is an asymmetry between commit/abort and preparation phase if the
following conditions are met:
1. set is a verdict map ("1.2.3.4 : jump foo")
2. timeouts are enabled
In this case, following sequence is problematic:
1. element E in set S refers to chain C
2. userspace requests removal of set S
3. kernel does a set walk to decrement chain->use count for all elements
from preparation phase
4. kernel does another set walk to remove elements from the commit phase
(or another walk to do a chain->use increment for all elements from
abort phase)
If E has already expired in 1), it will be ignored during list walk, so its use count
won't have been changed.
Then, when set is culled, ->destroy callback will zap the element via
nf_tables_set_elem_destroy(), but this function is only safe for
elements that have been deactivated earlier from the preparation phase:
lack of earlier deactivate removes the element but leaks the chain use
count, which results in a WARN splat when the chain gets removed later,
plus a leak of the nft_chain structure.
Update pipapo_get() not to skip expired elements, otherwise flush
command reports bogus ENOENT errors.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Userspace should not be able to trigger DRM_ERROR messages to spam the
logs; especially not through atomic commit parameters which are
completely legitimate for userspace to attempt.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 7707f7227f ("drm/rockchip: Add support for afbc")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230808104405.522493-1-daniels@collabora.com
Rename function RxBaInactTimeout to rtllib_rx_ba_inact_timeout in order
to Fix checkpatch warning: Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20230807054732.1864827-6-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function TxBaInactTimeout to rtllib_tx_ba_inact_timeout in order
to Fix checkpatch warning: Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20230807054732.1864827-5-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function BaSetupTimeOut to rtllib_ba_setup_timeout in order to Fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20230807054732.1864827-4-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function TsInitDelBA to rtllib_ts_init_del_ba in order to Fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20230807054732.1864827-3-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function TsInitAddBA to rtllib_ts_init_add_ba in order to Fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Link: https://lore.kernel.org/r/20230807054732.1864827-2-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed warnings and checks as reported by checkpatch to adhere to the
Linux kernel coding-style guidelines.
Signed-off-by: Alexon Oliveira <alexondunkan@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZM0QPaWv4lp93rGF@alolivei-thinkpadt480s.gru.csb
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the NanoPC T6, a single board computer from FriendlyElec based on
the RK3588.
Initial device tree supports debug UART, SD, eMMC, PCIe 3, PMIC,
and 40 pin GPIO assignments.
Signed-off-by: Thomas McKahan <tmckahan@singleboardsolutions.com>
Link: https://lore.kernel.org/r/20230809112120.99-3-tmckahan@singleboardsolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Support for Wireless USB and Ultra WideBand was removed in 2020 by
commit caa6772db4 ("Staging: remove wusbcore and UWB from the kernel
tree."). But the documentation files were left behind.
Let's get rid of that out-of-date documentation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/015d4310-bcd3-4ba4-9a0e-3664f281a9be@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit caa6772db4 ("Staging: remove wusbcore and
UWB from the kernel tree.").
Nevertheless, some vestiges of the old implementation still clutter up
the USB subsystem and one or two other places. Let's get rid of them
once and for all.
The only parts still left are the user-facing APIs in
include/uapi/linux/usb/ch9.h. (There are also a couple of misleading
instances, such as the Sierra Wireless USB modem, which is a USB modem
made by Sierra Wireless.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.
Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.
This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NXP processor using chipidea IP has a bug when frame babble is
detected.
As per 4.15.1.1.1 Serial Bus Babble:
A babble condition also exists if IN transaction is in progress at
High-speed SOF2 point. This is called frame babble. The host controller
must disable the port to which the frame babble is detected.
The USB controller has disabled the port (PE cleared) and has asserted
USBERRINT when frame babble is detected, but PEC is not asserted.
Therefore, the SW isn't aware that port has been disabled. Then the
SW keeps sending packets to this port, but all of the transfers will
fail.
This workaround will firstly assert PCD by SW when USBERRINT is detected
and then judge whether port change has really occurred or not by polling
roothub status. Because the PEC doesn't get asserted in our case, this
patch will also assert it by SW when specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TX is handled by primary sequencer. After cancelling primary command, poll
primary sequencer's irq status instead of that of secondary.
While at it, also remove a couple of redundant lines that read from IRQ_EN
register and write back same.
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1691578393-9891-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter reports boot issues with duplicate sysfs entries for multiport
drivers. Let's go back to using port->line for now to fix the regression.
With this change, the serial core port device names are not correct for the
hardware specific 8250 single port drivers, but that's a cosmetic issue for
now.
Fixes: d962de6ae5 ("serial: core: Fix serial core port id to not use port->line")
Reported-by: Guenter Roeck <groeck7@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230806062052.47737-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clarifies that the LEGACY_TIOCSTI setting is safe to turn off even
when running BRLTTY, as it was introduced in commit 690c8b804a
("TIOCSTI: always enable for CAP_SYS_ADMIN").
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20230808201115.23993-1-gnoack3000@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com
Since the driver tps6286x-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-8-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver pfuze100-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove the of_match_ptr() macro to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-7-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver mpq7920 depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove the of_match_ptr() macro to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-6-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver mcp16502 depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-5-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver hi6421-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-4-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver lp87565-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-3-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the driver da9121-regulator depends on CONFIG_OF,
it makes no difference to wrap of_match_ptr() here.
Remove of_match_ptr() macros to clean it up.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230809100428.2669817-2-chenjiahao16@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'Headphone Switch' control is already registered from
sound/soc/codecs/wm_hubs.c:479, so duplicating it in midas_wm1811
causes following probe failure:
midas-audio sound: control 2:0:0:Headphone Switch:0 is already present
midas-audio sound: ASoC: Failed to add Headphone Switch: -16
midas-audio sound: Failed to register card: -16
midas-audio: probe of sound failed with error -16
Fix this by dropping duplicated control.
Fixes: d27224a45e ("ASoC: samsung: midas_wm1811: Map missing jack kcontrols")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230809100446.2105825-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to call of_node_put() when break from
for_each_child_of_node(). This patch add missing
of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkfh9g68.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-6-stanislaw.gruszka@linux.intel.com
On some SoCs like MSM8956, MSM8976 and others, secure contexts are
also secured: these get programmed by the bootloader or TZ (as usual)
but their "interesting" registers are locked out by the hypervisor,
disallowing direct register writes from Linux and, in many cases,
completely disallowing the reprogramming of TTBR, TCR, MAIR and other
registers including, but not limited to, resetting contexts.
This is referred downstream as a "v2" IOMMU but this is effectively
a "v2 firmware configuration" instead.
Luckily, the described behavior of version 2 is effective only on
secure contexts and not on non-secure ones: add support for that,
finally getting a completely working IOMMU on at least MSM8956/76.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[Marijn: Rebased over next-20221111]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-5-stanislaw.gruszka@linux.intel.com
This driver was indexing the contexts by asid-1, which is probably
done under the assumption that the first ASID is always 1.
Unfortunately this is not always true: at least for MSM8956 and
MSM8976's GPU IOMMU, the gpu_user context's ASID number is zero.
To allow using a zero asid number, index the contexts by `asid`
instead of by `asid - 1`.
While at it, also enhance human readability by renaming the
`num_ctxs` member of struct qcom_iommu_dev to `max_asid`.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Writing the new TTBRs, TCRs and MAIRs on a previously enabled
context bank may trigger a context fault, resulting in firmware
driven AP resets: change the domain initialization programming
sequence to disable the context bank(s) and to also clear the
related fault address (CB_FAR) and fault status (CB_FSR)
registers before writing new values to TTBR0/1, TCR/TCR2, MAIR0/1.
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
As specified in this driver, the context banks are 0x1000 apart but
on some SoCs the context number does not necessarily match this
logic, hence we end up using the wrong ASID: keeping in mind that
this IOMMU implementation relies heavily on SCM (TZ) calls, it is
mandatory that we communicate the right context number.
Since this is all about how context banks are mapped in firmware,
which may be board dependent (as a different firmware version may
eventually change the expected context bank numbers), introduce a
new property "qcom,ctx-asid": when found, the ASID will be forced
as read from the devicetree.
When "qcom,ctx-asid" is not found, this driver retains the previous
behavior as to avoid breaking older devicetrees or systems that do
not require forcing ASID numbers.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[Marijn: Rebased over next-20221111]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Use VPU IP generation for naming FW instead of the platform name.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-4-stanislaw.gruszka@linux.intel.com
Add compatible string "qcom,msm-iommu-v2" for the inner node,
along with "qcom,msm8976-iommu" as a first user of it and
"qcom,msm-iommu-v2-ns" and "qcom,msm-iommu-v2-sec" for the context
bank nodes to support Qualcomm's secure fw "SMMU v2" implementation.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230622092742.74819-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new "qcom,ctx-asid" property to force an ASID number on IOMMU
contexts where required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230622092742.74819-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation names instead of a platform.
Change naming for functions and registries.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-3-stanislaw.gruszka@linux.intel.com
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation in names instead of a platform.
Change naming for sources files.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-2-stanislaw.gruszka@linux.intel.com
v4l_bound_align_image() aligns to a multiple of 2 to the power of
walign, not to walign. Depending on the pixel format, this causes the
image width to be aligned to 16 or 256 pixels instead of 4 or 8 as
required by the hardware. Fix it by rounding and clamping the width and
height manually.
Closes: https://lore.kernel.org/linux-media/CAJ+vNU0BOVLTL17ofgHwtexbpuMYwH_aGUC==EXABUtHHiv_ag@mail.gmail.com
Reported-by: Tim Harvey <tharvey@gateworks.com>
Fixes: 6f482c4729 ("media: imx: imx7-media-csi: Get rid of superfluous call to imx7_csi_mbus_fmt_to_pix_fmt")
Co-developed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove of_match_ptr() here.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230808133714.214914-3-wangzhu9@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>