Split types and pure function declarations from page_pool.h
and add them in page_page/types.h, so that C sources can
include page_pool.h and headers should generally only include
page_pool/types.h as suggested by jakub.
Rename page_pool.h to page_pool/helpers.h to have both in
one place.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com
[Jakub: change microsoft/mana, fix kdoc paths in Documentation]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
contains a few more bug fixes.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZNE5LRIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JUvwD/TWeVqdhA8EUPD2kNEDdx6jbsoOb4zEY4
JM0ek9Mw5s0A/R+aHpIXCX4e0HYataLT3ae6ioouJlUEfDLERsa+rEsF
=iyQs
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"A few more bug fixes"
* tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm/tpm_tis: Disable interrupts for Lenovo P620 devices
tpm: Disable RNG for all AMD fTPMs
sysctl: set variable key_sysctls storage-class-specifier to static
tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7
Refactor __ice_aq_get_set_rss_lut() to improve reader experience and limit
misuse scenarios (undesired LUT size for given LUT type).
Allow only 3 RSS LUT type+size variants:
PF LUT sized 2048, GLOBAL LUT sized 512, and VSI LUT sized 64, which were
used on default flows prior to this commit.
Prior to the change, code was mixing the meaning of @params->lut_size and
@params->lut_type, flag assigning logic was cryptic, while long defines
made everything harder to follow.
Fix that by extracting some code out to separate helpers.
Drop some of "shift by 0" statements that originated from Intel's
internal HW documentation.
Drop some redundant VSI masks (since ice_is_vsi_valid() gives "valid" for
up to 0x300 VSIs).
After sweeping all the defines out of struct ice_aqc_get_set_rss_lut,
it fits into 7 lines.
Finally apply some cleanup to the callsite
(use of the new enums, tmp var for lengthy bit extraction).
Note that flags for 128 and 64 sized VSI LUT are the same,
and 64 is used everywhere in the code (updated to new enum here), it just
happened that there was 128 in flag name.
__ice_aq_get_set_rss_key() uses the same VSI valid bit, make constant
common for it and __ice_aq_get_set_rss_lut().
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As some cards load FW from external sources, we have to wait
to be sure that FW is ready before setting link up.
Add check and wait for FW readiness
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a function to find the C827 PHY node handle and return C827 PHY
index for the E810 products.
In order to bring this function to full functionality, some
helpers for this were written by Michal Michalik.
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
enum ice_pkt_flags contains values such as ICE_PKT_FLAGS_VLAN and
ICE_PKT_FLAGS_TUNNEL, but actually the flags words which they refer to
contain a range of unrelated values - e.g. word 0 (ICE_PKT_FLAGS_VLAN)
contains fields such as from_network and ucast, which have nothing to do
with VLAN. Rename each enum value to ICE_PKT_FLAGS_MDID<number>, so it's
clear in which flags word does some value reside.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently it is possible to create a filter which breaks TX traffic, e.g.:
tc filter add dev $PF1 ingress protocol ip prio 1 flower ip_proto udp
dst_port $PORT action mirred egress redirect dev $VF1_PR
This adds a rule which might match both TX and RX traffic, and in TX path
the PF will actually receive the traffic, which breaks communication.
To fix this, add a match on direction metadata flag when adding a tc rule.
Because of the way metadata is currently handled, a duplicate lookup word
would appear if VLAN metadata is also added. The lookup would still work
correctly, but one word would be wasted. To prevent it, lookup 0 now always
contains all metadata. When any metadata needs to be added, it is added to
lookup 0 and lookup count is not incremented. This way, two flags residing
in the same word will take up one word, instead of two.
Note: the drop action is also affected, i.e. it will now only work in one
direction.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow LAG interfaces to be used in bridge offload using
netif_is_lag_master. In this case, search for ice netdev in
the list of LAG's lower devices.
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Not used in any other place, so just make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0pjfOe6R4X%2Fcql@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building perf with EXTRA_CFLAGS="-fsanitize=address" a leak was detected
elsewhere and lead to an audit, where we found that
synthesize_perf_probe_command() may leak synthesize_perf_probe_point()
return on failure, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0mzpQktHnhXJXr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building perf with EXTRA_CFLAGS="-fsanitize=address" a leak is detect
when trying to add a probe to a non-existent function:
# perf probe -x ~/bin/perf dso__neW
Probe point 'dso__neW' not found.
Error: Failed to add events.
=================================================================
==296634==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f67642ba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x7f67641a76f1 in allocate_cfi (/lib64/libdw.so.1+0x3f6f1)
Direct leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x7f67642b95b5 in __interceptor_realloc.part.0 (/lib64/libasan.so.8+0xb95b5)
#1 0x6cac75 in strbuf_grow util/strbuf.c:64
#2 0x6ca934 in strbuf_init util/strbuf.c:25
#3 0x9337d2 in synthesize_perf_probe_point util/probe-event.c:2018
#4 0x92be51 in try_to_find_probe_trace_events util/probe-event.c:964
#5 0x93d5c6 in convert_to_probe_trace_events util/probe-event.c:3512
#6 0x93d6d5 in convert_perf_probe_events util/probe-event.c:3529
#7 0x56f37f in perf_add_probe_events /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:354
#8 0x572fbc in __cmd_probe /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:738
#9 0x5730f2 in cmd_probe /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:766
#10 0x635d81 in run_builtin /var/home/acme/git/perf-tools-next/tools/perf/perf.c:323
#11 0x6362c1 in handle_internal_command /var/home/acme/git/perf-tools-next/tools/perf/perf.c:377
#12 0x63667a in run_argv /var/home/acme/git/perf-tools-next/tools/perf/perf.c:421
#13 0x636b8d in main /var/home/acme/git/perf-tools-next/tools/perf/perf.c:537
#14 0x7f676302950f in __libc_start_call_main (/lib64/libc.so.6+0x2950f)
SUMMARY: AddressSanitizer: 193 byte(s) leaked in 2 allocation(s).
#
synthesize_perf_probe_point() returns a "detachec" strbuf, i.e. a
malloc'ed string that needs to be free'd.
An audit will be performed to find other such cases.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0l1Oxamr4SVjfY@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jason A. Donenfeld says:
====================
wireguard fixes for 6.5-rc6
Just one patch this time, somewhat late in the cycle:
1) Fix an off-by-one calculation for the maximum node depth size in the
allowedips trie data structure, and also adjust the self-tests to hit
this case so it doesn't regress again in the future.
====================
Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmTQn1YTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Eh3CACQmSMV6FLXhFsOUzQS9ZyiKwQaAMG7
1giCbXRJS6CiyHIbkye/h7AIC4WYcr9bTXxFTLypWBMqo9uFEm/jiFRPMyJcPsZa
g8ySbQqkYeaGb0RkrHFbChsJaSnZhH1niatrAw+Vk2jeh/3Dait+LPFtdDWbLFsw
6mPoZMv18tVy1r/0kiqPCive1Gie3eKzmVwBk9AK6XVUPS88bX7OKRppoRXv3f9x
DpNKfJjhyWtBCoK8wsR3vVc1jRNL3eeLN7t8E7zYhfKRQsts1rVnyrWdihEjZ9ik
e97oMG5Zeu8yStYiAkbGjNlhs1Uujlzc3yJoN0tuIFvniD2xC4bxeZ+X
=X3r+
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230807' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-08-07
The patch is from me and reverts the addition of the CAN controller
nodes in the allwinner d1 SoC.
* tag 'linux-can-next-for-6.6-20230807' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
====================
Link: https://lore.kernel.org/r/20230807074222.1576119-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here, and __maybe_unused can also be removed.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230807134127.2380390-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add bond0 type bond mode 0
# ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
# ip netns exec ns1 ip link set bond_slave_1 master bond0
# ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set bond_slave_1 nomaster
# ip netns del ns1
The logical analysis of the problem is as follows:
1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
vlan_vid_add()
vlan_info_alloc()
__vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1
2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
vlan_vid_add()
__vlan_vid_add()
vlan_add_rx_filter_info()
if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
return 0;
if (netif_device_present(dev))
return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
// The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.
3. detach bond_slave_1 from bond0:
__bond_release_one()
vlan_vids_del_by_dev()
list_for_each_entry(vid_info, &vlan_info->vid_list, list)
vlan_vid_del(dev, vid_info->proto, vid_info->vid);
// bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
// bond_slave_1->vlan_info will be assigned NULL.
4. delete vlan10 during delete ns1:
default_device_exit_batch()
dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!
Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the i.MX8MP supports reading MAC propagation delay and correcting the
Hardware timestamp counter for additional delays [1], enable the feature
for this SoC.
This reduces phase error of the PPS output from the PTP Hardware Clock
from approx 150ns to 100ns.
[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-2-61e63427735e@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IEEE1588 Standard specifies that the timestamps of Packets must be
captured when the PTP message timestamp point (leading edge of first
octet after the start of frame delimiter) crosses the boundary between
the node and the network. As the MAC latches the timestamp at an
internal point, the captured timestamp must be corrected for the
additional data transmission latency, as described in the publicly
available datasheet [1].
This patch only corrects for the MAC-Internal delay, which can be read
out from the MAC_Ingress_Timestamp_Latency register on DWMAC version 5,
since the Phy framework currently does not support querying the Phy
ingress and egress latency. The Closs Domain Crossing Circuits errors as
indicated in [1] are already being accounted in the
stmmac_get_tx_hwtstamp() function and are not corrected here.
As the Latency varies for different link speeds and MII
modes of operation, the correction value needs to be updated on each
link state change.
As the delay also causes a phase shift in the timestamp counter compared
to the rest of the network, this correction will also reduce phase error
when generating PPS outputs from the timestamp counter.
Since the correction registers may be unavailable on some hardware and
no feature bits are documented for dynamically detection of the MAC
propagation delay readout, introduce a feature bit to explicitely enable
MAC delay Correction in the gluecode driver.
[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v2-1-3366f38ee9a6@pengutronix.de
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-1-61e63427735e@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Alina Yu <alina_yu@richtek.com>:
This patch series adds support for RTQ2208 SubPMIC regulators.
The RTQ2208 is a multi-phase, programmable power management IC that
integrate with dual multi-configurable, synchronous buck converters
and two ldos. The bucks features wide output voltage range from 0.4V to 2.05V
and the capability to configure the corresponding power stages.
The bare metal decompressor code was never really intended to run in a
hosted environment such as the EFI boot services, and does a few things
that are becoming problematic in the context of EFI boot now that the
logo requirements are getting tighter: EFI executables will no longer be
allowed to consist of a single executable section that is mapped with
read, write and execute permissions if they are intended for use in a
context where Secure Boot is enabled (and where Microsoft's set of
certificates is used, i.e., every x86 PC built to run Windows).
To avoid stepping on reserved memory before having inspected the E820
tables, and to ensure the correct placement when running a kernel build
that is non-relocatable, the bare metal decompressor moves its own
executable image to the end of the allocation that was reserved for it,
in order to perform the decompression in place. This means the region in
question requires both write and execute permissions, which either need
to be given upfront (which EFI will no longer permit), or need to be
applied on demand using the existing page fault handling framework.
However, the physical placement of the kernel is usually randomized
anyway, and even if it isn't, a dedicated decompression output buffer
can be allocated anywhere in memory using EFI APIs when still running in
the boot services, given that EFI support already implies a relocatable
kernel. This means that decompression in place is never necessary, nor
is moving the compressed image from one end to the other.
Since EFI already maps all of memory 1:1, it is also unnecessary to
create new page tables or handle page faults when decompressing the
kernel. That means there is also no need to replace the special
exception handlers for SEV. Generally, there is little need to do
any of the things that the decompressor does beyond
- initialize SEV encryption, if needed,
- perform the 4/5 level paging switch, if needed,
- decompress the kernel
- relocate the kernel
So do all of this from the EFI stub code, and avoid the bare metal
decompressor altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-24-ardb@kernel.org
Before refactoring the EFI stub boot flow to avoid the legacy bare metal
decompressor, duplicate the SNP feature check in the EFI stub before
handing over to the kernel proper.
The SNP feature check can be performed while running under the EFI boot
services, which means it can force the boot to fail gracefully and
return an error to the bootloader if the loaded kernel does not
implement support for all the features that the hypervisor enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-23-ardb@kernel.org
x86 will need to limit the kernel memory allocation to the lowest 512
MiB of memory, to match the behavior of the existing bare metal KASLR
physical randomization logic. So in preparation for that, add a limit
parameter to efi_random_alloc() and wire it up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-22-ardb@kernel.org
Factor out the decompressor sequence that invokes the decompressor,
parses the ELF and applies the relocations so that it can be called
directly from the EFI stub.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-21-ardb@kernel.org
It is no longer necessary to be cautious when referring to global
variables in the position independent decompressor code, now that it is
built using PIE codegen and makes an assertion in the linker script that
no GOT entries exist (which would require adjustment for the actual
runtime load address of the decompressor binary).
This means global variables can be referenced directly from C code,
instead of having to pass their runtime addresses into C routines from
asm code, which needs to happen at each call site. Do so for the code
that will be called directly from the EFI stub after a subsequent patch,
and avoid the need to duplicate this logic a third time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-20-ardb@kernel.org
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking
frontend and backend have not been setup yet this results in
e.g. the following errors getting logged:
[ 43.244549] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
[ 43.244744] Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22
pipewire triggers this leading to 96 lines getting logged
after the user has logged into a GNOME session.
Change the actual "no backend DAIs enabled for ... Port" error to
dev_err_once() to avoid it getting repeated 48 times. While at it
also improve the error by hinting the user how to fix this.
To not make developing new UCM profiles harder, also log the error
at dev_dbg() level all the time (vs once). So that e.g. dyndbg can
be used to (re)enable the messages.
Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix
the other error getting logged 48 times. Userspace passing wrong
parameters should not lead to dmesg messages.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ZSTD decompressor requires malloc() allocations to be 8 byte
aligned, so ensure that this the case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-19-ardb@kernel.org
Currently, the EFI stub relies on DXE services in some cases to clear
non-execute restrictions from page allocations that need to be
executable. This is dodgy, because DXE services are not specified by
UEFI but by PI, and they are not intended for consumption by OS loaders.
However, no alternative existed at the time.
Now, there is a new UEFI protocol that should be used instead, so if it
exists, prefer it over the DXE services calls.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-18-ardb@kernel.org
In preparation for updating the EFI stub boot flow to avoid the bare
metal decompressor code altogether, implement the support code for
switching between 4 and 5 levels of paging before jumping to the kernel
proper.
Reuse the newly refactored trampoline that the bare metal decompressor
uses, but relies on EFI APIs to allocate 32-bit addressable memory and
remap it with the appropriate permissions. Given that the bare metal
decompressor will no longer call into the trampoline if the number of
paging levels is already set correctly, it is no longer needed to remove
NX restrictions from the memory range where this trampoline may end up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-17-ardb@kernel.org
Merge series from Alper Nebi Yasak <alpernebiyasak@gmail.com>:
This patchset adds missing jack kcontrols for each independently
detectable audio peripheral and maps jack pins to those kcontrols
accordingly, with the primary intent to enable/improve jack detection
handling in PulseAudio and PipeWire through JackControl UCM values.
Usually it's just splitting a joint anything-is-connected "Headset Jack"
kcontrol (from [1]) into those like "Headphone Jack" and "Headset Mic"
(similar to a previous series for Intel Chromebooks [2]). This split is
important to avoid automatically switching to a nonexistent external
microphone when a headphone-only device is connected.
When the underlying hardware seems to support it, this also adds a "Line
Out" kcontrol. This is important in case the hardware can actually
support a line-level connection via a different configuration (bypassing
output amplifiers?), or simply for userspace to display "Line Out"
instead of "Headphones" to the user for connected line-out devices.
Beyond the mappings, I had to add PIN_SWITCH card kcontrols and DAPM
widgets to avoid "unknown pin" errors on my devices, so tried to do them
for all. For Intel devices I saw a pattern of routing things to
"Platform Clock" and added to that as well. Looking at patch 5/7 of a
Mediatek-related series [3], I can only guess that routes could be
further improved, but don't know exactly how for each device. And one
more concern is I don't know if the names conflict with any controls
from codecs, although I tried to keep to names of existing widgets.
As far as I can tell, the root cause for most of why these are missing
originates to things being developed for ChromeOS, whose userspace reads
the jack input device and doesn't care for these kcontrols. There's
non-ChromeOS cases as well, maybe things got copy-pasted around and
people didn't need or couldn't figure out how to get more specific than
a single jack kcontrol. The secondary intent in this patchset is to fix
this *everywhere*, so future copy-pastes result in the right behaviour.
For more context also see:
[1] ASoC: soc-card: Create jack kcontrol without pins
https://lore.kernel.org/alsa-devel/20220408041114.6024-1-akihiko.odaki@gmail.com/
[2] ASoC: Intel: Chromebooks: remap jack pins
https://lore.kernel.org/alsa-devel/20220616214055.134943-1-pierre-louis.bossart@linux.intel.com/
[3] ASoC: mediatek: Allow separate handling of headphone and headset mic jack
https://lore.kernel.org/alsa-devel/20220922235951.252532-1-nfraprado@collabora.com/
[4] ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols for jack detection
https://lore.kernel.org/alsa-devel/20200721182709.6895-1-alpernebiyasak@gmail.com/
This applies onto next-20230802. Unfortunately most of it is untested
except for a few Chromebooks I have (Kevin, Lick, Hana, Cozmo), because
I'm intentionally generalizing to everything.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset improves the pm_runtime behavior in rare corner cases
identified by the Intel CI in the last 6 months.
a) in stress-tests, it's not uncommon to see the following type of
warnings when the codec reports as ATTACHED
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This warning was not correlated with any functional issue, but it
exposed a design issue on when to enable pm_runtime. The recommended
practice in the pm_runtime documentation is to keep the devices in
'suspended' mode and mark them as 'active' when they are really
functional.
b) enabling pm_runtime when the codec reports as ATTACHED also creates
a problematic case when the ASoC pm_runtime_get_sync() will silently
fail due to the -EACCESS error handling. This can happen when playback
starts before the codec is enumerated.
This patchset modifies the initial stages so that codecs are
pm_runtime enabled in the .probe() callback, but become pm_runtime
'active' only when they report present. This is better aligned with
the design of the pm_runtime helpers and improved CI results
significantly.
This patchset modifies all existing SoundWire codecs (except Qualcomm
ones), but the pattern of changes is exactly the same in all patches.
Now that the trampoline setup code and the actual invocation of it are
all done from the C routine, the trampoline cleanup can be merged into
it as well, instead of returning to asm just to call another C function.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-16-ardb@kernel.org
The only remaining use of the trampoline address by the trampoline
itself is deriving the page table address from it, and this involves
adding an offset of 0x0. So simplify this, and pass the new CR3 value
directly.
This makes the fact that the page table happens to be at the start of
the trampoline allocation an implementation detail of the caller.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-15-ardb@kernel.org
Add missing capability check for each of the vnic counters exposed by
devlink health reporter, and thus avoid unexpected behavior due to
invalid access to registers.
While at it, read only the exact number of bits for each counter whether
it was 32 bits or 64 bits.
Fixes: b0bc615df4 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Fixes: a33682e4e7 ("net/mlx5e: Expose catastrophic steering error counters")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Handling pci errors should fully teardown and load back auxiliary
devices, same as done through mlx5 health recovery flow.
Fixes: 72ed5d5624 ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When device is in error state, marked by the flag
MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible
and so clock update work should be skipped. Furthermore, such access
through PCI in error state, after calling mlx5_pci_disable_device() can
result in failing to recover from pci errors.
Fixes: ef9814deaf ("net/mlx5e: Add HW timestamping (TS) support")
Reported-and-tested-by: Ganesh G R <ganeshgr@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/9bdb9b9d-140a-7a28-f0de-2e64e873c068@nvidia.com
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cited patch introduced buckets in hash mode, but missed to update
the ports/bucket check when modifying LAG.
Fix the check.
Fixes: 352899f384 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The controller number for ECVFs is always 0, because the ECPF must be
the eswitch owner for EC VFs to be enabled.
Fixes: dc13180824 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When querying eswitch functions 0 is a valid number of host VFs. After
introducing ARM SRIOV falling through to getting the max value from PCI
results in using the total VFs allowed on the ARM for the host.
Fixes: 86eec50bea ("net/mlx5: Support querying max VFs from device");
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The ECVF function ID range is 1..max_ec_vfs. Currently
mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which
results in a syndrome when querying the caps with more
recent firmware, or reading incorrect caps with older
firmware that supports EC VFs.
Fixes: 9ac0b12824 ("net/mlx5: Update vport caps query/set for EC VFs")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fixing wrong calculation of the modify hdr pattern size,
where the previously calculated number would not be enough
to accommodate the required number of actions.
Fixes: da5d0027d6 ("net/mlx5: DR, Add cache for modify header pattern")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.
The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
hex dump (first 32 bytes):
01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................
98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA....
backtrace:
[<00000000e992680d>] kmalloc_trace+0x27/0x120
[<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
[<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
[<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
[<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
[<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
[<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
[<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
[<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
[<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
[<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
[<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
[<0000000082dd6c8b>] netlink_unicast+0x438/0x710
[<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
[<0000000016e92590>] sock_sendmsg+0xc5/0x190
So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases.
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Since the current and desired number of paging levels are known when the
trampoline is being prepared, avoid calling the trampoline at all if it
is clear that calling it is not going to result in a change to the
number of paging levels.
Given that the CPU is already running in long mode, the PAE and LA57
settings are necessarily consistent with the currently active page
tables, and other fields in CR4 will be initialized by the startup code
in the kernel proper. So limit the manipulation of CR4 to toggling the
LA57 bit, which is the only thing that really needs doing at this point
in the boot. This also means that there is no need to pass the value of
l5_required to toggle_la57(), as it will not be called unless CR4.LA57
needs to toggle.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-14-ardb@kernel.org
Instead of returning to the asm calling code to invoke the trampoline,
call it straight from the C code that sets it up. That way, the struct
return type is no longer needed for returning two values, and the call
can be made conditional more cleanly in a subsequent patch.
This means that all callee save 64-bit registers need to be preserved
and restored, as their contents may not survive the legacy mode switch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-13-ardb@kernel.org
The 32-bit trampoline no longer uses the stack for anything except
performing a far return back to long mode, and preserving the caller's
stack pointer value. Currently, the trampoline stack is placed in the
same page that carries the trampoline code, which means this page must
be mapped writable and executable, and the stack is therefore executable
as well.
Replace the far return with a far jump, so that the return address can
be pre-calculated and patched into the code before it is called. This
removes the need for a 32-bit addressable stack entirely, and in a later
patch, this will be taken advantage of by removing writable permissions
from (and adding executable permissions to) the trampoline code page
when booting via the EFI stub.
Note that the value of RSP still needs to be preserved explicitly across
the switch into 32-bit mode, as the register may get truncated to 32
bits.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-12-ardb@kernel.org
Here hdr is a pointer, and we should measure the size of
struct sof_ipc_cmd_hdr.
Fixes: 12c41c779f ("ASoC: SOF: Refactor rx function for fuzzing")
Signed-off-by: Xia Fukun <xiafukun@huawei.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230807075118.128122-1-xiafukun@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>