As a preparation for Xe change stolen memory initialization check to be
done in use-time instead of during initialization.
In case of xe, stolen memory is initialised much later so it can't be
checked during init. There is no specific reason to check this in init for
i915 either -> perform the check in use-time. This also gives us benefit
fbc_no_reason reporting missing initialization being reason for disabled
fbc.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614051731.745821-3-jouni.hogander@intel.com
We are preparing for Xe. Xe stolen memory handling differs from i915 so we
want to move stolen memory handling details into i915_gem_stolen.
Also add a common type for fbc compressed fb and use it from fbc code
instead of underlying type directly. This way we can have common type
i915_stolen_fb for both i915 and Xe.
v2: Fix couple of checkpatch warnings
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614051731.745821-2-jouni.hogander@intel.com
Driver Changes:
- Avoid infinite GPU waits by avoidin premature release of request's
reusable memory (Chris, Janusz)
- Expose RPS thresholds in sysfs (Tvrtko)
- Apply GuC SLPC min frequency softlimit correctly (Vinay)
- Restore SLPC efficient freq earlier (Vinay)
- Consider OA buffer boundary when zeroing out reports (Umesh)
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R)
- Fix context workarounds with non-masked regs on MTL/DG2 (Lucas)
- Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi)
- Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun)
- Ensure memory quiesced before AUX CCS invalidation (Jonathan)
- Add a gsc_info debugfs (Daniele)
- Invalidate the TLBs on each GT on multi-GT device (Chris)
- Fix a VMA UAF for multi-gt platform (Nirmoy)
- Do not use stolen on MTL due to HW bug (Nirmoy)
- Check HuC and GuC version compatibility on MTL (Daniele)
- Dump perf_limit_reasons for slow GuC init debug (Vinay)
- Replace kmap() with kmap_local_page() (Sumitra, Ira)
- Add sentinel to xehp_oa_b_counters for KASAN (Andrzej)
- Add the gen12_needs_ccs_aux_inv helper (Andi)
- Fixes and updates for GSC memory allocation (Daniele)
- Fix one wrong caching mode enum usage (Tvrtko)
- Fixes for GSC wakeref (Alan)
- Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi)
- Rename flags with bit_group_X according to the datasheet (Andi)
- Use direct alias for i915 in requests (Andrzej)
- Replace i915->gt0 with to_gt(i915) (Andi)
- Use the i915_vma_flush_writes helper (Tvrtko)
- Selftest improvements (Alan)
- Remove dead code (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmTL9/EACgkQ+mJfZA7r
E8oqdQgAtD6j4Lih3rVRSLW5Y64MXnGdIHdNtVzLIOJWKLex3e7lFRvZp8IE6MY/
UifZBQ45UEJAo3kcX36TReKG/URzc6jpu3YA2ihwt6uTJW2bZWmtNgfGgnILssOi
hnOTRaxUwVM6wvi62AUKi6AxtDdHrRzcP+RyqGFvjBP76CuOpYSuJq8AK/PBXKFH
z760SqAWILOXqPG+oUYV9vdAmzY71gWDyi3MJqTYYg4YORK+itKMTbeWtFnEJF59
YqAD+/neZ7Y9FafSajUu9l9E9A9srqVAc2zFlcof2rA2MgJyHRBAl2fP4GY6+TDI
ahjmQY/BNP711SnEGArPkRZdcUSMXA==
=44FM
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com
Remove the 1 second timeout applied to hw_protection_shutdown after an
EC panic. On some platforms this 1 second timeout is insufficient to
allow the filesystem to fully sync. Independently the EC will force a
full system reset after a short period. So this backup timeout is
unnecessary.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230802175847.1.Ie9fc53b6a1f4c6661c5376286a50e0cf51b3e961@changeid
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add NAU8822 based analog sound card to Development carrier board.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add WM8904 based analog sound card to Dahlia carrier board.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A couple of hardware registers need to be set to reflect which
interrupts have been allocated to the device. Each register is 32-bit
wide and can receive four 8-bit values. If we provide any other interrupt
number than four, the irq_num variable will never be 0 within the while
check and the while block will loop forever.
There is an easy way to prevent this: just break the for loop
when we reach "irq_num == 0", which anyway means all interrupts have
been processed.
Cc: stable@vger.kernel.org
Fixes: 17ce252266 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20230731101442.792514-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712193505.3440752-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831 ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c75 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The codeaurora.org email domain is defunct and will bounce.
Update entries to Sinan's kernel.org address which is the address in
MAINTAINERS for this component.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92ea ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZM+bcQAKCRCRxhvAZXjc
opWnAP9Ik49607Rn3OvFhWiYQp21nJ9NTs4lp5H30gMM3KhOxQEA9YAafIRH3rMs
zYjmEBwf4FCW9XQ4QgmktsW4Y7RqggE=
=DCbd
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.
This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.
Change goto name "errout" to "err_out" to maintain consistency across
goto statements.
Fixes: 40bc471dc7 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e132 ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.
Signed-off-by: Christian Brauner <brauner@kernel.org>
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.
And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.
See commit 6192269444 ("introduce a parallel variant of ->iterate()")
that also added some documentation stating
Old method is only used if the new one is absent; eventually it will
be removed. Switch while you still can; the old one won't stay.
and that was back in April 2016. Here we are, many years later, and the
old version is still clearly sadly alive and well.
Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.
Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced. In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0 ("switch all procfs
directories ->iterate_shared()").
But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe ("procfs: add smack subdir to attrs").
And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.
So just fix it.
This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.
I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.
I just didn't want to make that conversion when we still had a core user
left.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f6180 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix the regulator names as per rohm,bd71847-pmic.yaml to fix the
following schema warnings:
imx8mm-emcon-avari.dtb: pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pass a single BD71847 clock entry to fix the following schema
warning:
imx8mm-var-som-symphony.dtb: pmic@4b: clocks: [[22], [0]] is too long
from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wifi chip description, which causes the following schema warning:
imx6q-prti6q.dtb: mmc@2194000: Unevaluated properties are not allowed ('wifi' was unexpected)
Pass the missing items to fix it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pass 'mmc' as the esdhc node names to fix the following schema
warnings:
vf610-cosmic.dtb: esdhc@400b1000: $nodename:0: 'esdhc@400b1000' does not match '^mmc(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Setting dev->priv_flags & IFF_SEE_ALL_HWTSTAMP_REQUESTS is only legal
for drivers which were converted to ndo_hwtstamp_get() and
ndo_hwtstamp_set(), and it is only there that we call ndo_hwtstamp_set()
for a request that otherwise goes to phylib (for stuff like packet traps,
which need to be undone if phylib failed, hence the old_cfg logic).
The problem is that we end up calling ndo_hwtstamp_get() when we don't
need to (even if the SIOCSHWTSTAMP wasn't intended for phylib, or if it
was, but the driver didn't set IFF_SEE_ALL_HWTSTAMP_REQUESTS). For those
unnecessary conditions, we share a code path with virtual drivers (vlan,
macvlan, bonding) where ndo_hwtstamp_get() is implemented as
generic_hwtstamp_get_lower(), and may be resolved through
generic_hwtstamp_ioctl_lower() if the lower device is unconverted.
I.e. this situation:
$ ip link add link eno0 name eno0.100 type vlan id 100
$ hwstamp_ctl -i eno0.100 -t 1
We are unprepared to deal with this, because if ndo_hwtstamp_get() is
resolved through a legacy ndo_eth_ioctl(SIOCGHWTSTAMP) lower_dev
implementation, that needs a non-NULL old_cfg.ifr pointer, and we don't
have it.
But we don't even need to deal with it either. In the general case,
drivers may not even implement SIOCGHWTSTAMP handling, only SIOCSHWTSTAMP,
so it makes sense to completely avoid a SIOCGHWTSTAMP call if we can.
The solution is to split the single "if" condition into 3 smaller ones,
thus separating the decision to call ndo_hwtstamp_get() from the
decision to call ndo_hwtstamp_set(). The third "if" condition is
identical to the first one, and both are subsets of the second one.
Thus, the "cfg" argument of kernel_hwtstamp_config_changed() is always
valid.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLOspJsvjPj+y8jikg7erXDomWe8sqHMdfL_2LQSFrPAg@mail.gmail.com/
Fixes: fd770e856e ("net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml.
Remove it.
Also, node names should be generic, so use 'flash' as the SPI NOR flash
node name.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use eth_broadcast_addr() to assign broadcast address instead
of memset().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Node names should be generic, so use 'flash' as the SPI NOR flash node
name.
This fixes the following schema warning:
imx53-smd.dtb: m25p32@1: $nodename:0: 'm25p32@1' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml.
Remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The bootloader does not add the partitions into DT, so add them manually
here.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
gcc with W=1 reports
drivers/net/ethernet/ibm/ibmvnic.c:194:13: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
^
This variable is not used so remove it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308040609.zQsSXWXI-lkp@intel.com/
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMLS102xA is a SOM family using NXP LS1021A CPU family.
MBLS102xA is an evaluation mainboard for this SOM.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.
It appears all of these updates can happen from multiple cpus.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we ran the stress-ng cache related stressors, we got the log as
below:
ubuntu@ubuntu:~$ stress-ng --l1cache 4
stress-ng: info: [656] defaulting to a 86400 second (1 day, 0.00 secs) run per stressor
stress-ng: info: [656] dispatching hogs: 4 l1cache
stress-ng: info: [657] stress-ng-l1cache: skipping stressor, cannot determine cache level 1 information from kernel
This is because the l1 and l2 cache info is missing in the devicetree,
ls1028a has dual cortex-a72 cores and has 48KB icache, 32KB dcache and
1MB l2 ucache:
- icache is 3-way set associative
- dcache is 2-way set associative
- l2cache is 16-way set associative
- line size are 64bytes
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The left overs of a moved interrupt are cleaned up once the interrupt is
raised on the new target CPU. Keeping the vector valid on the original
target CPU guarantees that there can't be an interrupt lost if the affinity
change races with an concurrent interrupt from the device.
This cleanup utilizes the lowest priority interrupt vector for this
cleanup, which makes sure that in the unlikely case when the to be cleaned
up interrupt is pending in the local APICs IRR the cleanup vector does not
live lock.
But there is no real reason to use an interrupt vector for cleaning up the
leftovers of a moved interrupt. It's not a high performance operation. The
only requirement is that it happens on the original target CPU.
Convert it to use a timer instead and adjust the code accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230621171248.6805-3-xin3.li@intel.com
Rename send_cleanup_vector() to vector_schedule_cleanup() to prepare for
replacing the vector cleanup IPI with a timer callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20230621171248.6805-2-xin3.li@intel.com
Passing the 'compatible' property inside the pfuze100 regulator nodes
is not allowed per pfuze100.yaml and results in the following
warning:
imx6q-bosch-acc.dtb: pmic@8: regulators:sw3a: Unevaluated properties are not allowed ('compatible' was unexpected)
Remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As per sgtl5000.yaml, '#sound-dai-cells' is a required property.
Pass it to fix the following schema warnings:
imx53-mba53.dtb: sgtl5000@a: '#sound-dai-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
These devices allow various modules to be connected and this enables
users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~30%. For example, with v6.4 increase in size is as follows:
22909 -> 29564 sun8i-h3-orangepi-lite.dtb
24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb
23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb
22969 -> 29537 sun8i-h3-nanopi-m1.dtb
24157 -> 30836 sun8i-h3-nanopi-duo2.dtb
24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb
23472 -> 30037 sun8i-h3-orangepi-one.dtb
24600 -> 31410 sun8i-h3-orangepi-plus.dtb
23618 -> 30230 sun8i-h3-orangepi-2.dtb
22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb
23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb
23113 -> 29699 sun8i-h3-zeropi.dtb
22803 -> 29270 sun8i-h3-nanopi-neo.dtb
24674 -> 31318 sun8i-h3-nanopi-r1.dtb
23477 -> 30038 sun8i-h3-orangepi-pc.dtb
24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb
23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230627133703.355893-1-felix.moessbauer@siemens.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC,
which seems to be just an H616 with more L2 cache. The board itself is a
slightly updated version of the Orange Pi Zero 2. It features:
- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2)
- AXP313a PMIC (more capable AXP305 on the Zero2)
- Raspberry-Pi-1 compatible GPIO header
- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
- 1 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2)
- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2)
- micro-HDMI port
- (yet) unsupported Allwinner WiFi/BT chip
Add the devicetree file describing the currently supported features,
namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at
the moment, though the basic functionality works.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>