Commit graph

1,233,452 commits

Author SHA1 Message Date
Ladislav Michl
23f87bcac6 usb: dwc3: dwc3-octeon: Pass dwc3_octeon to setup functions
Pass dwc3_octeon instead of just the base. It fits with the
function names and it requires less change in the future if
access to dwc3_octeon is needed.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/gt58laSlqAAT@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:52:15 +02:00
Ladislav Michl
417840663a usb: dwc3: dwc3-octeon: Use _ULL bitfields defines
While driver is intended to run on 64bit machines, it is compile time
tested for 32bit targets as well. Here shift count overflow is reported
for bits greater than 31, so use _ULL versions of BIT and GENMASK macros
to silence these warnings.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260537.MROrhVNM-lkp@intel.com/
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/aa2ncz6tJGNU@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:52:15 +02:00
Ladislav Michl
976f82e8aa usb: dwc3: dwc3-octeon: Convert to glue driver
DWC3 as implemented in Cavium SoC is using UCTL bridge unit
between I/O interconnect and USB controller.

Currently there is no bond with dwc3 core code, so if anything goes
wrong in UCTL setup dwc3 is left in reset, which leads to bus error
while trying to read any device register. Thus any failure in UCTL
initialization ends with kernel panic.

To avoid this move Octeon DWC3 glue code from arch/mips and make it
proper glue driver which is used instead of dwc3-of-simple.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/ReyiY7wS6DvN@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:52:15 +02:00
Ruan Jinjie
b35935d66a USB: usbip: Remove an unnecessary NULL value
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-6-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:48:56 +02:00
Ruan Jinjie
9de17578b9 usb: musb: Remove an unnecessary NULL value
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-5-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:48:55 +02:00
Ruan Jinjie
708368fb84 usb: chipidea: udc: Remove an unnecessary NULL value
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-4-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:48:55 +02:00
Ruan Jinjie
f87ba66a2a USB: misc: Remove unnecessary NULL values
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-3-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:48:55 +02:00
Ruan Jinjie
3024faf74d usb: gadget: udc: Remove unnecessary NULL values
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-2-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:48:24 +02:00
Xu Yang
803b1c8a0c usb: typec: tcpm: not sink vbus if operational current is 0mA
PD3.0 Spec 6.4.1.3.1 said:
For a Sink requiring no power from the Source, the Voltage (B19-10)
shall be set to 5V and the Operational Current Shall be set to 0mA.

Therefore, we can keep sink path closed if the operational current of
the first fixed PDO is 0mA.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230801070110.1653394-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:47:50 +02:00
Stanley Chang
2569088dba phy: realtek: usb: add the error handler for nvmem_cell_read
There are following smatch warning:
drivers/phy/realtek/phy-rtk-usb2.c:901 get_phy_data_by_efuse()
error: 'buf' dereferencing possible ERR_PTR()
drivers/phy/realtek/phy-rtk-usb2.c:942 get_phy_data_by_efuse()
error: 'buf' dereferencing possible ERR_PTR()

drivers/phy/realtek/phy-rtk-usb3.c:460
get_phy_data_by_efuse() error: 'buf' dereferencing possible ERR_PTR()

The nvmem_cell_read may fail to read. So, driver must handle failure cases.

Fixes: 134e6d25f6 ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Fixes: adda6e82a7 ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-phy/e7ff2870-c30c-4d8d-a7a9-d2d6a4962eb5@kadam.mountain/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230801071509.20096-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:47:18 +02:00
Fabio Estevam
e2fa03ec60 dt-bindings: usb: ci-hdrc-usb2: Fix clocks/clock-names maxItems
imx35.dtsi has three USB clocks. Adjust the maxItems to fix the following
schema warnings:

imx35-eukrea-mbimxsd35-baseboard.dtb: usb@53ff4400: clock-names: ['ipg', 'ahb', 'per'] is too long

Signed-off-by: Fabio Estevam  <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230731144422.1532498-2-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:47:11 +02:00
Fabio Estevam
dad255a236 dt-bindings: usb: ci-hdrc-usb2: Add the "fsl,imx35-usb" entry
The "fsl,imx35-usb" entry is missing in the supported compatible
string list.

Add it to the list.

Signed-off-by: Fabio Estevam  <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230731144422.1532498-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:47:10 +02:00
Kyle Tso
40f362ffa5 usb: typec: tcpm: Refactor the PPS APDO selection
In current design of the PPS APDO selection, TCPM power supply only
accepts the requested voltage which is inside the range of the selected
PPS profile. To extend the flexibility and usability, remove the checks
about the voltage range in current profile. And try to search all PPS
APDOs of the Source that fit the requested voltage.

Also remove some redundant checks in tcpm_pd_build_pps_request.

Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230731162159.19483-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:47:02 +02:00
Ruan Jinjie
f2e5812fb4 usb: host: Do not check for 0 return after calling platform_get_irq()
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20230802031236.2272196-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:46:53 +02:00
Li Zetao
98d6db05ed usb: gadget: udc: Remove redundant initialization for udc_driver
There is a warning reported by coccinelle:

./drivers/usb/gadget/udc/renesas_usbf.c:3381:3-8:
		No need to set .owner here. The core will do it.

The module_platform_driver() will set "THIS_MODULE" to driver.owner
when register a driver for platform-level devices, so it is redundant
initialization to set driver.owner in udc_driver statement. Remove it
to silence the warning.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230803032838.3045730-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:46:40 +02:00
Ruan Jinjie
ebcf774671 USB: cytherm: Correct the code style issue of redundant spaces
Ther are many redundant spaces, which is not consistent with
the kernel code style, so remove it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804091713.41503-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:46:30 +02:00
Zhu Wang
4f4bda58c5 usb: gadget: udc: gr_udc: Fix deferred probing
When platform_get_irq() fails, it may return -EPROBE_DEFER, which
suggested deferred probing, it is very important to propagate it
upstream. We cannot override it with other error code.

Commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk") makes sure IRQ0 is not returned.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230804110005.97061-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:46:24 +02:00
Zhu Wang
d3af2f4c04 usb: typec: tcpci_mt6370: remove redundant dev_err_probe()
When platform_get_irq() is called, the error message has been printed,
so it need not to call dev_err_probe() to present error messages.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230801122834.89168-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:46:16 +02:00
Zhu Wang
adbe9720e5 usb: musb: Fix deferred probing
When platform_get_irq_byname() fails, it may return -EPROBE_DEFER,
which suggested deferred probing, it is very important to propagate it
upstream. We cannot override it with other error code.

Commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk") makes sure IRQ0 is not returned.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230804105430.95773-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04 14:45:58 +02:00
Yang Yingliang
9606cda350
ASoC: ti: davinci-evm: simplify the code with module_platform_driver
The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:30:44 +01:00
Fabio Estevam
422f10adc3
ASoC: wm8960: Add support for the power supplies
WM8960 has the following power supplies:

- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1

Add support for them.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:30:43 +01:00
Fabio Estevam
6a41c3a160
ASoC: dt-bindings: wlf,wm8960: Describe the power supplies
WM8960 has the following power supplies:

- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1

Add them to bindings to improve the hardware description.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:30:42 +01:00
Trevor Wu
1d54134df4
ASoC: SOF: mediatek: mt8186 modify dram type as non-cache
To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:30:41 +01:00
William Qiu
33f1ef6d4e
spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI
Add JH7110's clock initialization code to the driver.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230804020254.291239-3-william.qiu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:29:50 +01:00
William Qiu
0d2b6a1b85
dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC
The QSPI controller needs three clock items to work properly on StarFive
JH7110 SoC, so there is need to change the maxItems's value to 3.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230804020254.291239-2-william.qiu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:29:49 +01:00
Martin Fuzzey
30c694fd4a
regulator: da9063: better fix null deref with partial DT
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.

So update to V2.

The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one.

Fixes: 98e2dd5f7a ("regulator: da9063: fix null pointer deref with partial DT config")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Tested-by: Benjamin Bara <benjamin.bara@skidata.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230804083514.1887124-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:26:53 +01:00
Bard Liao
3853111015
ASoC: max98363: don't return on success reading revision ID
max98363_io_init needs to keep going when we read revision ID
successfully.

Fixes: 18c0af945f ("ASoC: max98363: add soundwire amplifier driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230804034734.3848227-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-04 13:26:51 +01:00
Ian Kent
17fce12e7c
autofs: use wake_up() instead of wake_up_interruptible(()
In autofs_wait_release() wake_up() is used to wake up processes waiting
on a mount callback to complete which matches the wait_event_killable()
in autofs_wait().

But in autofs_catatonic_mode() the wake_up_interruptible() was not also
changed at the time autofs_wait_release() was changed.

Signed-off-by: Ian Kent <raven@themaw.net>
Message-Id: <169112719813.7590.4971499386839952992.stgit@donald.themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-04 13:57:34 +02:00
Fedor Pchelkin
ccbe77f7e4
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
Syzkaller reports a memory leak:

BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
  comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff  ..........'.....
    08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00  ..'.............
  backtrace:
    [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
    [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
    [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
    [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
    [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
    [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
    [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
    [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
    [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
    [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
    [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
    [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.

In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.

edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk

So in catatonic mode we should free waitqueues which counter becomes zero.

edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk

Reported-by: syzbot+5e53f70e69ff0c0a1c0c@syzkaller.appspotmail.com
Suggested-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: autofs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <169112719161.7590.6700123246297365841.stgit@donald.themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-04 13:57:34 +02:00
Michael Riesch
e83172ec54 dt-bindings: display: add rotation property to sitronix,st7789v
The sitronix-st7789v driver now considers the rotation property.
Add the property to the documentation.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-st7789v-v3-3-157d68fb63e2@wolfvision.net
2023-08-04 13:56:12 +02:00
Michael Riesch
b27c0f6d20 drm/panel: sitronix-st7789v: add panel orientation support
Determine the orientation of the display based on the device tree and
propagate it.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-st7789v-v3-2-157d68fb63e2@wolfvision.net
2023-08-04 13:56:11 +02:00
Michael Riesch
a238b5ee39 drm/panel: sitronix-st7789v: fix indentation in drm_panel_funcs
Fix indentation of the callbacks in struct drm_panel_funcs.
No functional changes.

Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-st7789v-v3-1-157d68fb63e2@wolfvision.net
2023-08-04 13:56:11 +02:00
Takashi Iwai
4d84f763f7 ASoC: Fix for v6.5
Not really a fix, but rather a licensing update for the fsl_micfil
 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTL+ToACgkQJNaLcl1U
 h9AxVAf/eOl186cHrwHv1OId/GI+H7DtDfUY9NXMALxxVzqlzyp/Q8Giw0QYwWMc
 ALCET44nMErbukRTrItfwvQR91NK4NZo4tOuIC+SNZL7lmWAsSZpWx7OrL/e43LI
 9qTP3YI412S5RF5Ph6wKlAiB2mqM/3zYAqjgKXHe0qT59DHjm3Utk1feqJ6aZR5C
 73osmygh3Y1ZF/IS43E2J01aLxOSkLzmROnNh8po5ZilwQkZxGcedzFt2AfkWe3b
 GwSi96hK2ahZkSXjUNSzzY7IwnMsblceIFbYTfPBW4jZ45rreANO8HIcisxND4FZ
 8l/fijwjEs9OTbqy6jJIsin/r2/L5Q==
 =HGzt
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v6.5-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fix for v6.5

Not really a fix, but rather a licensing update for the fsl_micfil
driver.
2023-08-04 13:53:15 +02:00
Cristian Marussi
31c7c1397a firmware: arm_scmi: Add v3.2 perf level indexing mode support
SCMI v3.2 adds PERF protocol support to optionally define performance
domains that cannot be represented on a linear scale; the platform firmware
can declare the performance levels of a domain as being 'level indexed' and
provide an indicative frequency associated to each of those levels, with
such indexes not required anymore to be contiguous nor to satisfy any
linear-scaling constraint: when level-indexing is available for a domain,
the platform will expect to deal with SCMI requests using indexes instead
of performance levels for that domain.

Add level-indexing mode support to the PERF protocol implementation while
maintaining unchanged the protocol operations interface exposed by PERF;
all the required mapping from performamce levels/frequencies to the
corresponding level indexes is carried out transparently by the core PERF
protocol support: as a consequence no change is either required in any
SCMI driver using the PERF protocol, even when using level indexing.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230717161246.1761777-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-08-04 12:17:19 +01:00
Cristian Marussi
3da8211235 firmware: arm_scmi: Harden perf domain info access
Harden internal accesses to domain info in the SCMI perf protocol.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230717161246.1761777-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-08-04 12:16:55 +01:00
Takashi Iwai
d700a11633 Merge branch 'topic/intel-hda' into for-next
Pull ArrowLake-S PCI ID addition and config for MTL/LNL

Link: https://lore.kernel.org/r/20230802150105.24604-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 13:05:42 +02:00
Kai Vehmanen
3f8c530fc4 ALSA: hda/i915: extend connectivity check to cover Intel ARL
Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:53:53 +02:00
Pierre-Louis Bossart
d2852b8c04 ALSA: hda: intel-dsp-cfg: add LunarLake support
One more PCI ID for the road.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:53:53 +02:00
Pierre-Louis Bossart
73e6ebf6a2 ALSA: hda: intel-dsp-cfg: use common include for MeteorLake
This was not updated in Commit 0cd0a7c2c5 ("ALSA: intel-dsp-config: Convert to PCI device IDs defines")

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:53:53 +02:00
Kai Vehmanen
3bef068168 ALSA: hda: add HD Audio PCI ID for Intel Arrow Lake-S
Add HD Audio PCI ID for Intel Arrow Lake-S platform.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:53:53 +02:00
Pierre-Louis Bossart
a13b5340aa PCI: add ArrowLake-S PCI ID for Intel HDAudio subsystem.
Add part ID to common include file

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:53:52 +02:00
dengxiang
788449ae57 ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
This patch adds a USB quirk for Mythware XA001AU USB interface.

Signed-off-by: dengxiang <dengxiang@nfschina.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230803024437.370069-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-04 12:47:30 +02:00
Konrad Dybcio
4e048e9b7a interconnect: qcom: qcm2290: Enable sync state
Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.

Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.

Fixes: 1a14b1ac39 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-04 13:44:57 +03:00
Konrad Dybcio
ba86de8acc interconnect: qcom: qcm2290: Enable keep_alive on all buses
QCM2290 expects all buses to be up at all times when the CPU is
active. Enable keep_alive on all of them to achieve that.

Fixes: 1a14b1ac39 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-1-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-04 13:44:05 +03:00
Sudeep Holla
ebd4f6102f MAINTAINERS: Simplify entries for Arm Vexpress platform and related drivers
Currently the entries have regexs but in absolute paths. The "N:" entries
can deal with all files and directories irrespective of the depth/path
matching the regex patterns.

Simplifies the entry by making using "N:" and dropping "F:" with absolute
paths.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20230727133551.648390-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-08-04 11:34:35 +01:00
Zhu Wang
86b7e033d6 net: lan966x: Do not check 0 for platform_get_irq_byname()
Since platform_get_irq_byname() never returned zero, so it need not to
check whether it returned zero, it returned -EINVAL or -ENXIO when
failed, so we replace the return error code with the result it returned.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 11:10:33 +01:00
Eric Dumazet
7740bb882f net: vlan: update wrong comments
vlan_insert_tag() and friends do not allocate a new skb.
However they might allocate a new skb->head.
Update their comments to better describe their behavior.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 11:02:46 +01:00
Ruidong Tian
fd380097cd coresight: tmc: Explicit type conversions to prevent integer overflow
Perf cs_etm session executed unexpectedly when AUX buffer > 1G.

  perf record -C 0 -m ,2G -e cs_etm// -- <workload>
  [ perf record: Captured and wrote 2.615 MB perf.data ]

Perf only collect about 2M perf data rather than 2G. This is becasuse
the operation, "nr_pages << PAGE_SHIFT", in coresight tmc driver, will
overflow when nr_pages >= 0x80000(correspond to 1G AUX buffer). The
overflow cause buffer allocation to fail, and TMC driver will alloc
minimal buffer size(1M). You can just get about 2M perf data(1M AUX
buffer + perf data header) at least.

Explicit convert nr_pages to 64 bit to avoid overflow.

Fixes: 22f429f19c ("coresight: etm-perf: Add support for ETR backend")
Fixes: 99443ea19e ("coresight: Add generic TMC sg table framework")
Fixes: 2e499bbc1a ("coresight: tmc: implementing TMC-ETF AUX space API")
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230804081514.120171-2-tianruidong@linux.alibaba.com
2023-08-04 10:52:32 +01:00
Daniel Vetter
3d00c59d14 amd-drm-next-6.6-2023-07-28:
amdgpu:
 - Lots of checkpatch cleanups
 - GFX 9.4.3 updates
 - Add USB PD and IFWI flashing documentation
 - GPUVM updates
 - RAS fixes
 - DRR fixes
 - FAMS fixes
 - Virtual display fixes
 - Soft IH fixes
 - SMU13 fixes
 - Rework PSP firmware loading for other IPs
 - Kernel doc fixes
 - DCN 3.0.1 fixes
 - LTTPR fixes
 - DP MST fixes
 - DCN 3.1.6 fixes
 - SubVP fixes
 - Display bandwidth calculation fixes
 - VCN4 secure submission fixes
 - Allow building DC on RISC-V
 - Add visible FB info to bo_print_info
 - HBR3 fixes
 - Add PSP 14.0 support
 - GFX9 MCBP fix
 - GMC10 vmhub index fix
 - GMC11 vmhub index fix
 - Create a new doorbell manager
 - SR-IOV fixes
 
 amdkfd:
 - Cleanup CRIU dma-buf handling
 - Use KIQ to unmap HIQ
 - GFX 9.4.3 debugger updates
 - GFX 9.4.2 debugger fixes
 - Enable cooperative groups fof gfx11
 - SVM fixes
 
 radeon:
 - Lots of checkpatch cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZMQ0vAAKCRC93/aFa7yZ
 2EOOAQCrsNf1IEynXVj0gVYOWFDpBCdaDkw+gXR73nOlwBeZzgD8DAoismXYDY95
 pkKlx/HL5O8qyZ25Lc9ZlgsJnTpnpw4=
 =c/Jk
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-next-6.6-2023-07-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.6-2023-07-28:

amdgpu:
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SubVP fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- Add PSP 14.0 support
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes

amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes

radeon:
- Lots of checkpatch cleanups

Merge conflicts:
- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
	The switch to drm eu helpers in 8a206685d3 ("drm/amdgpu: use
	drm_exec for GEM and CSA handling v2") clashed with the
	cosmetic cleanups from 30953c4d00 ("drm/amdgpu: Fix style
	issues in amdgpu_gem.c"). I
	kept the former since the cleanup up code is gone.
- drivers/gpu/drm/amd/amdgpu/atom.c.
	adf64e2142 ("drm/amd: Avoid reading the VBIOS part number
	twice") removed code that 992b8fe106 ("drm/radeon: Replace
	all non-returning strlcpy with strscpy") polished.

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230728214228.8102-1-alexander.deucher@amd.com
[sima: some merge conflict wrangling as noted]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2023-08-04 11:10:18 +02:00
Rob Herring
1ce1cd8208 hwrng: Enable COMPILE_TEST for more drivers
There's quite a few hwrng drivers which are easily enabled for
COMPILE_TEST, so let's enable them.

The dependency on HW_RANDOM is redundant, so drop that while we're here.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04 17:09:26 +08:00