Commit graph

1,233,452 commits

Author SHA1 Message Date
YueHaibing
a488bc1622 fanotify: Remove unused extern declaration fsnotify_get_conn_fsid()
This is never used, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725135528.25996-1-yuehaibing@huawei.com>
2023-08-01 23:46:17 +02:00
Lee Jones
ea45025de8 drm/xlnx/zynqmp_dp: Fix function name zynqmp_dp_link_train() -> zynqmp_dp_train()
Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/xlnx/zynqmp_dp.c:793: warning: expecting prototype for zynqmp_dp_link_train(). Prototype was for zynqmp_dp_train() instead

Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-08-02 00:44:57 +03:00
Ross Maynard
b99225b4fe USB: zaurus: Add ID for A-300/B-500/C-700
The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632
Fixes: 16adf5d079 ("usbnet: Remove over-broad module alias from zaurus.")
Signed-off-by: Ross Maynard <bids.7405@bigpond.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-01 14:44:27 -07:00
Dan Carpenter
ef45e8400f net: ll_temac: fix error checking of irq_of_parse_and_map()
Most kernel functions return negative error codes but some irq functions
return zero on error.  In this code irq_of_parse_and_map(), returns zero
and platform_get_irq() returns negative error codes.  We need to handle
both cases appropriately.

Fixes: 8425c41d1e ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-01 14:38:17 -07:00
Uwe Kleine-König
a53ef0550b clk: versaclock3: Switch to use i2c_driver's probe callback
The previous mass switch of clk drivers done in commit 62279db5a3
("clk: Switch i2c drivers back to use .probe()") was based on v6.4-rc1
Since then this driver was added which needs to be converted back in the
same way before eventually .probe_new() can be dropped from struct
i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230721071846.111663-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-01 13:36:49 -07:00
August Wikerfors
688b419c57 nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
The Samsung PM9B1 512G SSD found in some Lenovo Yoga 7 14ARB7 laptop units
reports eui as 0001000200030004 when resuming from s2idle, causing the
device to be removed with this error in dmesg:

nvme nvme0: identifiers changed for nsid 1

To fix this, add a quirk to ignore namespace identifiers for this device.

Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-08-01 13:28:29 -07:00
Andrei Coardos
c975cc599e gpio: sama5d2-piobu: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:27:38 +02:00
Andrei Coardos
8e85d6af1b gpio: rc5t583: remove unneeded call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:26:48 +02:00
Andrei Coardos
e91e8b537a gpio: pmic-eic-sprd: remove unnecessary call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:25:30 +02:00
Stanislav Jakubek
b0c488615e dt-bindings: gpio: brcm,kona-gpio: convert to YAML
Convert Broadcom Kona family GPIO controller bindings to DT schema.

Changes during conversion:
  - add used, but previously undocumented SoC-specific compatibles

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:23:50 +02:00
Andrei Coardos
5f57665a21 gpio: palmas: remove unnecessary call to platform_set_drvdata()
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:22:38 +02:00
Andrei Coardos
ceac51b1ee gpio: max77620: remove unneeded platform_set_drvdata() call
This function call is not required because no counterpart
platform_get_drvdata() call is present to leverage the private data of
the driver.
Since the private data is confined to this driver file, external access
is not feasible.
The use of this function appears redundant in the current context of the
driver's implementation.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:15:23 +02:00
Andrei Coardos
c518e7dc64 gpio: lp3943: remove unneeded platform_set_drvdata() call
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call, to access the private data of the driver.
Also, the private data is defined in this driver, so there is no risk of
it being accessed outside of this driver file.

Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-01 21:14:48 +02:00
Varshini Rajendran
0f264ab788 dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7
Add compatible for sam9x7.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728102451.265869-1-varshini.rajendran@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-02 00:05:08 +05:30
Christophe JAILLET
926a4b17e9 dmaengine: ep93xx: Use struct_size()
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.

This is less verbose, more robust and more informative.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/36fa11d95b448b5f3f1677da41fe35b9e2751427.1690041500.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-02 00:02:51 +05:30
Rob Herring
897500c7ea dmaengine: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143138.1066177-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01 23:51:27 +05:30
Antoniu Miclaus
6d9c5ae6a7 dt-bindings: iio: admv1014: make all regs required
Make the regulators required in the dt bindings.

Despite the fact that the datasheet is not explicit enough, all the
specifications of the part are built around these pins being supplied.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230731144404.389255-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-01 19:12:00 +01:00
Fenghua Yu
62b41b6566 dmaengine: idxd: Expose ATS disable knob only when WQ ATS is supported
WQ Advanced Translation Service (ATS) can be controlled only when
WQ ATS is supported. The sysfs ATS disable knob should be visible only
when the features is supported.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712174436.3435088-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01 23:34:43 +05:30
Fenghua Yu
97b1185fe5 dmaengine: idxd: Simplify WQ attribute visibility checks
The functions that check if WQ attributes are invisible are almost
duplicate. Define a helper to simplify these functions and future
WQ attribute visibility checks as well.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712174436.3435088-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01 23:34:43 +05:30
Uros Bizjak
cae701b9cc dmaengine:idxd: Use local64_try_cmpxchg in perfmon_pmu_event_update
Use local64_try_cmpxchg instead of local64_cmpxchg (*ptr, old, new) == old
in perfmon_pmu_event_update.  x86 CMPXCHG instruction returns success in
ZF flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).

Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.

No functional change intended.

Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: https://lore.kernel.org/r/20230703145346.5206-1-ubizjak@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01 23:32:06 +05:30
Fabio Estevam
f1de55ff7c dmaengine: ipu: Remove the driver
The i.MX3 IPU driver does not support devicetree and i.MX has been converted
to a DT-only platform since kernel 5.10.

As there is no user for this driver anymore, just remove it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230729192945.1217206-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01 23:26:46 +05:30
Matti Vaittinen
b20f5801ec iio: cdc: ad7150: relax return value check for IRQ get
fwnode_irq_get[_byname]() were changed to not return 0 anymore. The
special error case where device-tree based IRQ mapping fails can't no
longer be reliably detected from this return value. This yields a
functional change in the driver where the mapping failure is treated as
an error.

The mapping failure can occur for example when the device-tree IRQ
information translation call-back(s) (xlate) fail, IRQ domain is not
found, IRQ type conflicts, etc. In most cases this indicates an error in
the device-tree and special handling is not really required.

One more thing to note is that ACPI APIs do not return zero for any
failures so this special handling did only apply on device-tree based
systems.

Drop the special handling for DT mapping failures as these can no longer
be separated from other errors at driver side. Change all failures in
IRQ getting to be handled by continuing without the events instead of
aborting the probe upon certain errors.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/3ad1c6f195ead3dfa8711235e1dead139d27f700.1690890774.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-01 18:55:55 +01:00
Matti Vaittinen
1402913c92 iio: mb1232: relax return value check for IRQ get
fwnode_irq_get() was changed to not return 0 anymore.

Drop check for return value 0.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/9e18cf49a8bb581a84c3fa548ea577e2a3eb840d.1690890774.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-01 18:55:46 +01:00
Yauheni Kaliuta
d3c4db86c7 tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf tracepoint program uses struct trace_event_raw_sys_enter as
argument where trace_entry is the first field. Use the same instead
of unsigned long long since if it's amended (for example by RT
patch) it accesses data with wrong offset.

Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801075222.7717-1-ykaliuta@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-08-01 10:53:28 -07:00
Jani Nikula
d823445b09 drm/i915/uncore: fix race around i915->params.mmio_debug
Only check the conditions for unclaimed reg debug once to avoid locking
problems when i915->params.mmio_debug changes between header and footer.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8749
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a53fb0fd84c4627398ccd4304b35db05603b89b6.1690886109.git.jani.nikula@intel.com
2023-08-01 19:39:17 +03:00
Jani Nikula
7afe234064 drm/i915/uncore: split unclaimed_reg_debug() to header and footer
Make it easier to have different logic for the two for follow-up.

Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a0a93f08314f8d7e222a907d9aa5e0b89cb969e.1690886109.git.jani.nikula@intel.com
2023-08-01 19:39:15 +03:00
Petr Tesarik
1395706a14 swiotlb: search the software IO TLB only if the device makes use of it
Skip searching the software IO TLB if a device has never used it, making
sure these devices are not affected by the introduction of multiple IO TLB
memory pools.

Additional memory barrier is required to ensure that the new value of the
flag is visible to other CPUs after mapping a new bounce buffer. For
efficiency, the flag check should be inlined, and then the memory barrier
must be moved to is_swiotlb_buffer(). However, it can replace the existing
barrier in swiotlb_find_pool(), because all callers use is_swiotlb_buffer()
first to verify that the buffer address belongs to the software IO TLB.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:32 +02:00
Petr Tesarik
1aaa736815 swiotlb: allocate a new memory pool when existing pools are full
When swiotlb_find_slots() cannot find suitable slots, schedule the
allocation of a new memory pool. It is not possible to allocate the pool
immediately, because this code may run in interrupt context, which is not
suitable for large memory allocations. This means that the memory pool will
be available too late for the currently requested mapping, but the stress
on the software IO TLB allocator is likely to continue, and subsequent
allocations will benefit from the additional pool eventually.

Keep all memory pools for an allocator in an RCU list to avoid locking on
the read side. For modifications, add a new spinlock to struct io_tlb_mem.

The spinlock also protects updates to the total number of slabs (nslabs in
struct io_tlb_mem), but not reads of the value. Readers may therefore
encounter a stale value, but this is not an issue:

- swiotlb_tbl_map_single() and is_swiotlb_active() only check for non-zero
  value. This is ensured by the existence of the default memory pool,
  allocated at boot.

- The exact value is used only for non-critical purposes (debugfs, kernel
  messages).

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:27 +02:00
Petr Tesarik
ad96ce3252 swiotlb: determine potential physical address limit
The value returned by default_swiotlb_limit() should be constant, because
it is used to decide whether DMA can be used. To allow allocating memory
pools on the fly, use the maximum possible physical address rather than the
highest address used by the default pool.

For swiotlb_init_remap(), this is either an arch-specific limit used by
memblock_alloc_low(), or the highest directly mapped physical address if
the initialization flags include SWIOTLB_ANY. For swiotlb_init_late(), the
highest address is determined by the GFP flags.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:24 +02:00
Petr Tesarik
79636caad3 swiotlb: if swiotlb is full, fall back to a transient memory pool
Try to allocate a transient memory pool if no suitable slots can be found
and the respective SWIOTLB is allowed to grow. The transient pool is just
enough big for this one bounce buffer. It is inserted into a per-device
list of transient memory pools, and it is freed again when the bounce
buffer is unmapped.

Transient memory pools are kept in an RCU list. A memory barrier is
required after adding a new entry, because any address within a transient
buffer must be immediately recognized as belonging to the SWIOTLB, even if
it is passed to another CPU.

Deletion does not require any synchronization beyond RCU ordering
guarantees. After a buffer is unmapped, its physical addresses may no
longer be passed to the DMA API, so the memory range of the corresponding
stale entry in the RCU list never matches. If the memory range gets
allocated again, then it happens only after a RCU quiescent state.

Since bounce buffers can now be allocated from different pools, add a
parameter to swiotlb_alloc_pool() to let the caller know which memory pool
is used. Add swiotlb_find_pool() to find the memory pool corresponding to
an address. This function is now also used by is_swiotlb_buffer(), because
a simple boundary check is no longer sufficient.

The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(),
simplified and enhanced to use coherent memory pools if needed.

Note that this is not the most efficient way to provide a bounce buffer,
but when a DMA buffer can't be mapped, something may (and will) actually
break. At that point it is better to make an allocation, even if it may be
an expensive operation.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:20 +02:00
Petr Tesarik
62708b2ba4 swiotlb: add a flag whether SWIOTLB is allowed to grow
Add a config option (CONFIG_SWIOTLB_DYNAMIC) to enable or disable dynamic
allocation of additional bounce buffers.

If this option is set, mark the default SWIOTLB as able to grow and
restricted DMA pools as unable.

However, if the address of the default memory pool is explicitly queried,
make the default SWIOTLB also unable to grow. This is currently used to set
up PCI BAR movable regions on some Octeon MIPS boards which may not be able
to use a SWIOTLB pool elsewhere in physical memory. See octeon_pci_setup()
for more details.

If a remap function is specified, it must be also called on any dynamically
allocated pools, but there are some issues:

- The remap function may block, so it should not be called from an atomic
  context.
- There is no corresponding unremap() function if the memory pool is
  freed.
- The only in-tree implementation (xen_swiotlb_fixup) requires that the
  number of slots in the memory pool is a multiple of SWIOTLB_SEGSIZE.

Keep it simple for now and disable growing the SWIOTLB if a remap function
was specified.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:17 +02:00
Petr Tesarik
158dbe9c9a swiotlb: separate memory pool data from other allocator data
Carve out memory pool specific fields from struct io_tlb_mem. The original
struct now contains shared data for the whole allocator, while the new
struct io_tlb_pool contains data that is specific to one memory pool of
(potentially) many.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:14 +02:00
Petr Tesarik
fea18777a7 swiotlb: add documentation and rename swiotlb_do_find_slots()
Add some kernel-doc comments and move the existing documentation of struct
io_tlb_slot to its correct location. The latter was forgotten in commit
942a8186eb ("swiotlb: move struct io_tlb_slot to swiotlb.c").

Use the opportunity to give swiotlb_do_find_slots() a more descriptive name
and make it clear how it differs from swiotlb_find_slots().

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:12 +02:00
Petr Tesarik
05ee774122 swiotlb: make io_tlb_default_mem local to swiotlb.c
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.

To avoid breaking existing users, provide helper functions for the few
required fields.

As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:09 +02:00
Petr Tesarik
0c6874a6ac swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
If swiotlb is allocated, immediately return 0, so callers do not have to
check io_tlb_default_mem.nslabs explicitly.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-08-01 18:02:02 +02:00
Yang Yingliang
39b5ba6cb5
regulator: max77857: change some variables to static
max77857_regmap_config and max77857_driver are only used
in max77857-regulator.c now, change them to static.

Fixes: af71cccade ("regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230801130354.552243-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-01 16:02:22 +01:00
Yue Haibing
fbeb1ec85d ALSA: usb-audio: Remove unused function declaration
Commit 68e67f40b7 ("ALSA: snd-usb: move calls to usb_set_interface")
leave this unused declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230801144512.18716-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-01 16:56:57 +02:00
Dmitry Antipov
f5343efdf5 wifi: libertas: prefer kstrtoX() for simple integer conversions
Prefer 'kstrtoX()' family of functions over 'sscanf()' to convert
strings to integers and always check results of the conversions.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-6-dmantipov@yandex.ru
2023-08-01 17:49:02 +03:00
Dmitry Antipov
3e14212f79 wifi: libertas: handle possible spu_write_u16() errors
Check and handle (well, report at least, as it's done through the rest
of the module) possible 'spu_write_u16()' errors in 'if_spi_e2h()'.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-5-dmantipov@yandex.ru
2023-08-01 17:49:02 +03:00
Dmitry Antipov
6c968e9019 wifi: libertas: cleanup SDIO reset
Embed SDIO reset worker in 'struct if_sdio_card' and so
drop 'reset_host' and 'card_reset_work' static variables,
adjust related code. Not sure whether it's possible to do
something useful on 'mmc_add_host()' error, so just add
'dev_err()' to emit an error message.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-4-dmantipov@yandex.ru
2023-08-01 17:49:01 +03:00
Dmitry Antipov
2c531d28f8 wifi: libertas: simplify list operations in free_if_spi_card()
Use 'list_for_each_entry_safe()' to simplify
list operations in 'free_if_spi_card()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-3-dmantipov@yandex.ru
2023-08-01 17:49:01 +03:00
Dmitry Antipov
ce44fdf9c9 wifi: libertas: use convenient lists to manage SDIO packets
Use convenient lists to manage SDIO packets, adjust
'struct if_sdio_packet', 'struct if_sdio_card' and
related code accordingly.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-2-dmantipov@yandex.ru
2023-08-01 17:49:01 +03:00
Dmitry Antipov
c1861ff1d6 wifi: libertas: add missing calls to cancel_work_sync()
Add missing 'cancel_work_sync()' in 'if_sdio_remove()'
and on error handling path in 'if_sdio_probe()'.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230725060531.72968-1-dmantipov@yandex.ru
2023-08-01 17:49:00 +03:00
Rob Herring
e7899a90ce wifi: drivers: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724211914.805876-1-robh@kernel.org
2023-08-01 17:48:38 +03:00
Amisha Patel
6fd879f978 wifi: wilc1000: add SPI commands retry mechanism
In some situations like, chip wake-up with powersave enabled, SPI
commands are failing temporarily. Reissuing commands after reset helps
to overcome the failure. So, add the retry limit and reset command
sequence API for read/write SPI commands.

Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724163955.4583-1-amisha.patel@microchip.com
2023-08-01 17:48:05 +03:00
Polaris Pi
1195852816 wifi: mwifiex: Fix OOB and integer underflow when rx packets
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer.

Fixes: 2dbaf751b1 ("mwifiex: report received management frames to cfg80211")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com
2023-08-01 17:47:27 +03:00
Heiko Carstens
388acb4716 s390/ptrace: add missing linux/const.h include
Adrian Reber reported the following CRIU build bug after
commit b8af599977 ("s390/ptrace: make all psw related
defines also available for asm"):

compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
  523 |         if (psw->mask & PSW_MASK_RI) {
      |                         ^~~~~~~~~~~

Add the missing linux/const.h include to fix this.

Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes: b8af599977 ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-01 16:47:03 +02:00
Prasurjya Rohan Saikia
646462f860 wifi: wilc1000: remove use of has_thrpt_enh3 flag
The 'enhance throughput flow' algorithm is used by default. So older
sections of the code are removed so as to always use this new algorithm.

Signed-off-by: Prasurjya Rohan Saikia <prasurjya.rohansaikia@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230710094401.235222-1-prasurjya.rohansaikia@microchip.com
2023-08-01 17:46:37 +03:00
Ping-Ke Shih
023d2f14ab wifi: rtw89: get data rate mode/NSS/MCS v1 from RX descriptor
The data rate from RX descriptor also uses hardware rate v1 for WiFi 7
chips. The rate code contains three parts -- mode, NSS and MCS. For
CCK/OFDM/HT rates, NSS/MCS parts are the same as before. VHT/HE/EHT rates
are changed and listed as below:

     mode    NSS    MCS
V0   [8:7]   [6:4]  [3:0]
V1   [10:8]  [7:5]  [4:0]

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230728070252.66525-11-pkshih@realtek.com
2023-08-01 17:44:37 +03:00
Ping-Ke Shih
ae775faa87 wifi: rtw89: add to display hardware rates v1 histogram in debugfs
The upcoming WiFi 7 chips support EHT rates, and hardware rate codes are
changed too, so modify to adapt the changes. (EHT counters are still zeros
in below example)

RX count:
   Legacy: [0, 0, 0, 0]
     OFDM: [0, 0, 0, 0, 0, 0, 0, 0]
     HT 0: [0, 0, 0, 0, 0, 0, 0, 0]
     HT 1: [0, 0, 0, 0, 0, 0, 0, 0]
  VHT 1SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0][0, 0]
  VHT 2SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0][0, 0]
   HE 1SS: [0, 0, 42, 0, 43, 90, 75, 0, 26, 20, 260, 7]
   HE 2SS: [0, 96, 232, 84, 125, 184, 52, 0, 0, 0, 0, 0]
  EHT 1SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0][0, 0]
  EHT 2SS: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230728070252.66525-10-pkshih@realtek.com
2023-08-01 17:44:36 +03:00