There are some devices in the 57765 ASIC rev that are EEE capable.
Unfortunately the EEE setup code only gets executed if the device is
gigabit capable. This patch fixes the problem.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should only dereference the pointer if it's valid, not the other way
round.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They need to be available for other protocols as well, since
they are used in sock.c openly
Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO
The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid which was to piggyback on git commit
e79f86b2ef "swiotlb: Use page alignment
for early buffer allocation" which:
We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.
So alloc them with page alignment at first, to avoid lose two pages
And doing that fixes the outstanding issue.
CC: stable@kernel.org
Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com>
Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
d312ae878b "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.
For a guest booted with maxmem=512, memory=128 this results in:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
-[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable)
-[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable)
+[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable)
...
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
-[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
[ 0.000000] initial memory mapped : 0 - 027ff000
[ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096
-[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000
-[ 0.000000] 0000000000 - 0008100000 page 4k
-[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000
+[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000
+[ 0.000000] 0000000000 - 0020800000 page 4k
+[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000
[ 0.000000] xen: setting RW the range 27e8000 - 27ff000
[ 0.000000] 0MB HIGHMEM available.
-[ 0.000000] 129MB LOWMEM available.
-[ 0.000000] mapped low ram: 0 - 08100000
-[ 0.000000] low ram: 0 - 08100000
+[ 0.000000] 520MB LOWMEM available.
+[ 0.000000] mapped low ram: 0 - 20800000
+[ 0.000000] low ram: 0 - 20800000
With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).
There is no change for dom0.
Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: stable@kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
My box with following cpuinfo needs the cx8 enabling still:
vendor_id : CentaurHauls
cpu family : 6
model : 13
model name : VIA Eden Processor 1200MHz
stepping : 0
cpu MHz : 1199.940
cache size : 128 KB
This fixes valgrind to work on my box (it requires and checks
cx8 from cpuinfo).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Link: http://lkml.kernel.org/r/1323961888-10223-1-git-send-email-timo.teras@iki.fi
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
No need to play games with the qlock now that the freelist lock nests inside
it. Also clean up various outdated comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache. This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up. We need to make sure we only set
cache_generation if we've done the truncate. The user tested this patch and
verified that the panic no longer occured. Thanks,
Reported-and-Tested-by: Klaus Bitto <klaus.bitto@gmail.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop. This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs. Then we come back later to do another
truncate and it blows up because we already have an orphan item. This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We were occasionaly leaking space when running xfstest 269. This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved. This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such. The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for. The other problem is with our error handling
in the reservation code. There are two cases that we need to deal with
1) We raced with free. In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation. However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use. So as it stands the code was
doing this fine and it worked out, except in case #2
2) We don't race with free. Nobody comes in and changes anything, and our
reservation fails. In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything. So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.
Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex. We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things. With this patch my space leak scripts no longer
scream bloody murder. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC. This needs to be fixed in a few areas
1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty. So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.
2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't
setting ->setattr for symlinks, even though we should have been. This catches
one of the cases where we were getting errors in mark_inode_dirty.
3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty. This lets us return errors properly for truncate
and chown/anything related to setattr.
4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one. The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.
With this patch xfstests 83 complains a handful of times instead of hundreds of
times. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff. First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this. Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker. Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.
People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The Smack LSM hook for security_d_instantiate checks
the inode's i_op->getxattr value to determine if the
containing filesystem supports extended attributes.
The BTRFS filesystem sets the inode's i_op value only
after it has instantiated the inode. This results in
Smack incorrectly giving new BTRFS inodes attributes
from the filesystem defaults on the assumption that
values can't be stored on the filesystem. This patch
moves the assignment of inode operation vectors ahead
of the calls to d_instantiate, letting Smack know that
the filesystem supports extended attributes. There
should be no impact on the performance or behavior of
BTRFS.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we have a constant stream of end_io completions or crc work,
we can hit softlockup messages from the async helper threads. This
adds a cond_resched() into the loop to avoid them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since we have the free space caches, btrfs_orphan_cleanup also runs for
the tree_root. Unfortunately this also cleans up the orphans used to mark
subvol deletions in progress.
Currently if a subvol deletion gets interrupted twice by umount/mount, the
deletion will not be continued and the space permanently lost, though it
would be possible to write a tool to recover those lost subvol deletions.
This patch checks if the orphan belongs to a subvol (dead root) and skips
the deletion.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we use raid0 as the data profile, df command may show us a very
inaccurate value of the available space, which may be much less than the
real one. It may make the users puzzled. Fix it by changing the calculation
of the available space, and making it be more similar to a fake chunk
allocation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfsck report errors after the 83th case of xfstests was run, The error
number is 400, it means the used disk space of the file is wrong.
The reason of this bug is that:
The file truncation may fail when the space of the file system is not enough,
and leave some file extents, whose offset are beyond the end of the files.
When we want to expand those files, we will drop those file extents, and
put in dummy file extents, and then we should update the i-node. But btrfs
forgets to do it.
This patch adds the forgotten i-node update.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfsck report error 100 after the 83th case of xfstests was run, it means
the i_size of the file is wrong.
The reason of this bug is that:
Btrfs increased i_size of the file at the beginning, but it failed to expand
the file, and failed to update the i_size to the old size because there is no
enough space in the file system, so we found a wrong i_size.
This patch fixes this bug by updating the i_size just when we pass the file
expanding and get enough space to update i-node.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The patch below removes an extra semicolon.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Chris Mason <chris.mason@oracle.com>
CC: linux-btrfs@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There's a mistake in one of the pmcraid_err() calls in
drivers/scsi/pmcraid.c - 'failed' is misspelled as 'faile'. This patch
fixes that error.
PS. This patch is generated on top of my previous one "[PATCH] SCSI,
pmcraid: Fix kmalloc() argument order in pmcraid_chr_ioctl()".
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Field names were shortened: "pkg" is now "pk", "core" is now "cr"
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In routine testing I found this file should not specify a site
specific toolchain path. I suggested that the defconfigs should
not be calling out site specific toolchain locations, so we should
delete the setting of CROSS_COMPILE. In response, it was indicated
that this is an obsolete defconfig and it should simply be deleted.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
When compiling wl12xx for x86, there was a warning complaining about
the size of the buffer we were allocating in the stack:
drivers/net/wireless/wl12xx/debugfs.c: In function 'driver_state_read':
drivers/net/wireless/wl12xx/debugfs.c:380:1: warning: the frame size of 1040 bytes is larger than 1024 bytes
To prevent this, allocate the buffer in the heap instead.
Signed-off-by: Luciano Coelho <coelho@ti.com>
For 32-bit architectures using standard jiffies the idletime calculation
in uptime_proc_show will quickly overflow. It takes (2^32 / HZ) seconds
of idle-time, or e.g. 12.45 days with no load on a quad-core with HZ=1000.
Switch to 64-bit calculations.
Cc: stable@vger.kernel.org
Cc: Michael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Several people with this chipset have reported inconsistent/sloppy
values for position reporting when the DMA position buffer is used,
and that setting position_fix=1 have fixed their problems.
BugLink: https://bugs.launchpad.net/bugs/825709
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gcc complains about this printk:
drivers/usb/renesas_usbhs/mod_gadget.c:188:3: warning: format ‘%x’
expects argument of type ‘unsigned int’, but argument 3 has type
‘dma_addr_t’ [-Wformat]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch tidyup below smatch complaint
drivers/usb/renesas_usbhs/mod_host.c +642 usbhsh_queue_done()
warn: variable dereferenced before check 'urb' (see line 636)
Special thanks to Dan
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This call-back is invoked when the task that is bound to a
pasid is about to exit. The driver can use it to shutdown
all context related to that context in a safe way.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This function can be used to find out which features
necessary for IOMMUv2 usage are available on a given device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen. Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The symbolic register names for PCI and PASID changed in
PCI code. This patch adapts the AMD IOMMU driver to these
changes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Most of the parsing errors (typically resulting in device not being claimed
by HID subsystem at all) are reported only in debugging mode, which makes
root-causing problems with buggy devices unnecessarily more difficult.
Convert reporting of important HID report descriptor parsing errors to
be reported through hid_err() / hid_warn() instead of dbg_hid().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
wl1271_configure_suspend_sta leaves a stale stack declared
completion in wlvif->ps_compl. Set it to NULL before returning.
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
[small fix to use wlvif->ps_compl instead of wl->ps_compl]
Signed-off-by: Luciano Coelho <coelho@ti.com>
Use the newly introduced ieee80211_free_txskb() instead
of dev_kfree_skb() for failed tx packets.
Additionally, if the skb is a dummy packet, re-enqueue
it (as the fw expects it) instead of freeing it.
Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
We need to set the extended radio parameters for wl127x only.
Currently, we were only calling this command with wl127x STA mode, but
we should also do it for AP mode.
Move the call to the extended radio paramaters to the common hw_init
and use a single if for the chip type to do everything at once.
Signed-off-by: Luciano Coelho <coelho@ti.com>
We should not get an hlid value bigger than WL12XX_MAX_LINKS from
wl1271_rx_handle_data(). We have a WARN_ON in case it happens. But
despite the warning, we would still go ahead and write the hlid bit
into active_hlids (a stack variable). This would cause us to
overwrite other data in the stack.
To avoid this problem, we now skip the write when issuing the warning,
so at least we don't corrupt data.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Commit 80900d0140 accidently broke
the ABI for testmode commands. Restore the ABI again.
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Luciano Coelho <coelho@ti.com>
The parent and real_parent pointers should be considered __rcu,
since they should be held under either tasklist_lock or
rcu_read_lock.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20111214223925.GA27578@www.outflux.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They had several problems/shortcomings:
Only the first memory operand was mentioned in the 2x32bit asm()
operands, and 2x64-bit version had a memory clobber. The first
allowed the compiler to not recognize the need to re-load the
data in case it had it cached in some register, and the second
was overly destructive.
The memory operand in the 2x32-bit asm() was declared to only be
an output.
The types of the local copies of the old and new values were
incorrect (as in other per-CPU ops, the types of the per-CPU
variables accessed should be used here, to make sure the
respective types are compatible).
The __dummy variable was pointless (and needlessly initialized
in the 2x32-bit case), given that local copies of the inputs
already exist.
The 2x64-bit variant forced the address of the first object into
%rsi, even though this is needed only for the call to the
emulation function. The real cmpxchg16b can operate on an
memory.
At once also change the return value type to what it really is -
'bool'.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4EE86D6502000078000679FE@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the flags to get rid of the [9] and [10] feature names
in cpuinfo's 'power management' fields and replace them with
meaningful names.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1323875574-17881-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
