Commit graph

291,781 commits

Author SHA1 Message Date
Luciano Coelho
3f3fd78e33 wl12xx: increase firmware upload chunk size
The chunk size used during firmware upload was set to 512, which is
the size of a single SDIO block (or two).  This is very inneficient
because we send one or two blocks only per SDIO transaction and don't
get the full benefits of sdio block transfers.

This patch increases the chunk size to 16K.  This more than doubles
the transfer speed both in wl127x and wl128x chips, with greater
impact on the latter:

wl127x:   512 bytes chunk -> ~132ms
        16384 bytes chunk ->  ~57ms
wl128x:   512 bytes chunk -> ~216ms
        16384 bytes chunk ->  ~37ms

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:53 +02:00
Luciano Coelho
e62c9ce4a4 wl12xx: use the same SDIO block size for all different chips
The sdio driver uses a block size of 512 bytes by default.  With our
card, this doesn't work correctly because it sets the block size FBR
in the chip too early (ie. before the chip is powered on).  Thus, if
we don't set it explicitly, block mode remains disabled in the chip.
If we try to send more data than fits in one block, the sdio driver
will split it into separate blocks before sending to the chip.  This
causes problems because the chip is not expecting multiple blocks.

At the moment this is not a problem, because we use chunks of 512
bytes for firmware upload and the data is always sent in byte mode.
In the next patch, we will change the chunk size to a bigger value, so
this patch is a preparation for that.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:53 +02:00
Luciano Coelho
ce39defb5c wl12xx: change blocksize alignment quirk to negative
SDIO blocksize alignment support is now the rule, not the exception.
To simplify the code in patches to come, invert the meaning of the
quirk to be negative (ie. the quirk is set if the device does _not_
support blocksize alignment).

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:53 +02:00
Eliad Peller
2f8e81ad42 wl12xx: clear wl->vif on remove_interface
wl->vif should be cleared on remove_interface()
(rather than on stop()) even when only a single
vif is supported, because during vif mode change
stop() might not get called (e.g. because of
monitor interface existence)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:46 +02:00
Eliad Peller
fa5e13756a wl12xx: add vifs_state debugfs key
Add debugfs key to dump information regarding the
active vifs (similar to the driver_state debugfs key)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:46 +02:00
Arik Nemtsov
a693534b1a wl12xx: keep beacon-filtering enabled during STA operation
Enable beacon filtering on STA init, and don't disable it when entering
active mode. Otherwise dynamic-PS supports means we receive beacons from
the current AP during any Tx/Rx performed by the driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:46 +02:00
Eliad Peller
d6fa37c9ff wl12xx: reconfigure rate policies on set_bitrate_mask
The rate policies are configured only after association,
resulting in auth req being sent in wrong rates.

Reconfigure rate policies on bitrate mask change.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:45 +02:00
Eliad Peller
679a673414 wl12xx: couple role_start_dev with roc
Device role is always started along with ROC.
Couple them together by introducing new wl12xx_start_dev
and wl12xx_stop_dev functions.

By using these functions, we solve a bug that occured during
channel switch - we started the dev role on one channel, and
ROCed on a different one.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08 15:36:45 +02:00
Sylwester Nawrocki
34490a0a3d [media] staging: as102: Eliminate as10x_handle_t alias
Remove pre-processor defined as10x_handle_t data type by directly
replacing it with struct as102_bus_adapter_t. phandle is renamed
to adap inside function bodies.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:33:25 -02:00
Sylwester Nawrocki
d758b9ef7a [media] staging: as102: Define device name string pointers constant
Supresses following checkpatch warning:
WARNING: static const char * array should probably be static const char * const

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:32:42 -02:00
Sylwester Nawrocki
a11726349c [media] staging: as102: Move variable declarations to the header
Fixes following checkpatch.pl warning:
WARNING: externs should be avoided in .c files

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:32:06 -02:00
Sylwester Nawrocki
3288e201a1 [media] staging: as102: Use linux/uaccess.h instead of asm/uaccess.h
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:31:25 -02:00
Sylwester Nawrocki
c20ec0354f [media] staging: as102: Remove linkage specifiers for C++
The as10x_cmd.h header is not public so there should be no need
for an "extern "C"" in it.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:31:13 -02:00
Sylwester Nawrocki
7d462fe580 [media] staging: as102: Replace printk(KERN_<LEVEL> witk pr_<level>
While at it also correct some spelling errors.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:31:01 -02:00
Sylwester Nawrocki
14e0e4bf6c [media] staging: as102: Whitespace and indentation cleanup
Remove some unnecessary braces. Replace spaces with tabs where
expected. Replace gcc specific __FUNCTION__ with  C99 __func__.
No functional changes.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:30:46 -02:00
Sylwester Nawrocki
880102898f [media] staging: as102: Fix the dvb device registration error path
Release already acquired resources when error happens during
devices registration steps.
Use dev_err()  where struct device is available, instead of driver
specific err().

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:29:22 -02:00
Sylwester Nawrocki
fa1a13f621 [media] staging: as102: Replace pragma(pack) with attribute __packed
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Piotr Chmura <chmooreck@poczta.onet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:28:55 -02:00
Sylwester Nawrocki
57753767dd [media] staging: as102: Make the driver select CONFIG_FW_LOADER
It doesn't seem to be of much advantage to compile in FW_LOADER
support conditionally, then make the driver always select FW_LOADER
and remove #idefs from the code.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:28:37 -02:00
Sylwester Nawrocki
82aae98df4 [media] staging: as102: Remove leftovers of the SPI bus driver
SPI bus driver support is not included in this module, the SPI
driver files are missing. But some bits are still present so
clean up the unused code.
The SPI driver support can be properly added later if needed.

Then CONFIG_AS102_SPI and CONFIG_AS102_USB is now not needed
and the pre-processor statements using these config options
can now be removed from *.c files.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:28:06 -02:00
Sylwester Nawrocki
c06271e052 [media] staging: as102: Remove unnecessary typedefs
According to the kernel coding rules typedefs should be avoided,
so replace theit occurances with explicit enum/union types.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:24:44 -02:00
Piotr Chmura
7f033e3354 [media] staging: as102: Remove comment tags for editors configuration
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Piotr Chmura <chmooreck@poczta.onet.pl>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:24:25 -02:00
Malcolm Priestley
3339a5b165 [media] it913x-fe ver 1.10 correct SNR reading from frontend
Correction of reading from frontend and represents
a SNR nonlinear scale of minimum signal to full signal.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:23:03 -02:00
Peter De Schrijver
c540d9f13d [media] bt8xx: add support for PCI device ID 0x36c
add support for conexant PCI device 0x36c. Seems to be fully compatible with
the currently supported chips, yet the chip has different PCI ID.

Signed-off-by: Peter De Schrijver <p2@psychaos.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:22:24 -02:00
Peter De Schrijver
de2843b663 [media] bt8xx: add support for Tongwei Video Technology TD-3116
The following patch adds support for the Tongwei Video Technology TD-3116 board. This
is a Bt878 based capture card with 16 inputs meant for surveilance applications.
It also offers a way to check which inputs have a video signal while capturing another
input. In addition there are a number of alarm inputs and outputs available and there
is microcontroller which is presumably intended for use as a system watchdog. None of
these extra capabilities are supported by the patch.

Signed-off-by: Peter De Schrijver <p2@psychaos.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 11:17:57 -02:00
Malcolm Priestley
3822c7cef7 [media] it913x ver 1.09 support for USB 1 devices (IT9135)
IT9135 devices do support USB 1.
Support added with restricton on pid count to 5.
IT9137 devices wil not connect in USB 1 mode.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:45:19 -02:00
Venkat Subbiah
e63fb7a9da MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
This is to exclude it from force threading to allow RT patch set to work.
And while on this line
* Remove IRQF_DISABLED as as this flag is NOOP
* Add IRQF_PERCPU as this is a per cpu interrupt.

Signed-off-by: Venkat Subbiah <venkat.subbiah@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
To: linux-rt-users@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2817/
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:30 +00:00
Florian Fainelli
df55a66add MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
Since eb9ae7f2 (gpio: fix build error in include/asm-generic/gpio.h)
the generic version of gpio.h calls __gpio_{set,get}_value which we
do not define. Get rid of asm-generic/gpio.h and define the missing
stubs directly for BCM47xx to build.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org
CC: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/2885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Ralf Baechle
7985808151 MIPS: NXP: Remove unused source files.
The NXP code was moved for 2.6.36 but two files survived unused in the
old location.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Thomas Jarosch
617d101754 MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
Cause is a misplaced bracket.

The code

    strlen(buf+1)

will be two bytes less than

    strlen(buf)+1

The +1 is in this code to reserve space for an additional space character.

[ralf@linux-mips.org: Thomas' original patch fixed the issue only for
 Yosemite but the same bug exists also in Emma.]

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Patchwork: https://patchwork.linux-mips.org/patch/2861/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Hans de Goede
1249a3a82d [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls
Otherwise the fh changing the master control won't get the inactive state
change event for the slave controls.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:30:33 -02:00
Hans de Goede
e3e72f39b6 [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe
Setting sev->fh to NULL causes problems for the del op added in the next
patch of this series, since this op needs a way to get to its own data
structures, and typically this will be done by using container_of on an
embedded v4l2_fh struct.

The reason the original code is setting sev->fh to NULL is to signal
to users of the event framework that the unsubscription has happened,
but since their is no shared lock between the event framework and users
of it, this is inherently racy, and it also turns out to be unnecessary
as long as both the event framework and the user of the framework do their
own locking properly and the user guarantees that it holds no references
to the subcribed_event structure after its del operation has been called.

This is best explained by looking at the only code currently checking for
sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event
function. Here is the relevant code from v4l2-ctrls: send_event():

	if (sev->fh && (sev->fh != fh ||
			(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
		v4l2_event_queue_fh(sev->fh, &ev);

Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race
on the same sev, then the following could happens:

1) send_event checks sev->fh, finds it is not NULL
<thread switch>
2) v4l2_event_unsubscribe sets sev->fh NULL
3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent
   to calling: v4l2_event_queue_fh(NULL, &ev)
5) oops, NULL pointer deref.

Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and
without the (now senseless since always true) sev->fh != NULL check in

1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev)
<thread switch>
2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list
<thread switch>
3) send_event calls v4l2_event_queue_fh(sev->fh, &ev)
4) v4l2_event_queue_fh blocks on the fh_lock spinlock
<thread switch>
5) v4l2_event_unsubscribe unlocks the fh_lock spinlock
6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
8) v4l2_event_queue_fh takes the fh_lock
7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since
   sev->list has been removed from fh->subscribed already -> does nothing
9) v4l2_event_queue_fh releases the fh_lock
10) the caller of send_event releases the ctrl lock (mutex)
<thread switch>
11) v4l2_ctrls del_event takes the ctrl lock
12) v4l2_ctrls del_event removes sev->node from the ev_subs list
13) v4l2_ctrls del_event releases the ctrl lock
14) v4l2_event_unsubscribe frees the sev, to which no references are being
    held anymore

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:51 -02:00
Hans de Goede
78c87e863b [media] v4l2-event: Remove pending events from fh event queue when unsubscribing
The kev pointers inside the pending events queue (the available queue) of the
fh point to data inside the sev, unsubscribing frees the sev, thus making these
pointers point to freed memory!

This patch fixes these dangling pointers in the available queue by removing
all matching pending events on unsubscription.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:29 -02:00
Hans de Goede
b36b505965 [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:29:05 -02:00
Javier Martinez Canillas
2da12fcbea [media] tvp5150: replace video standard "magic" numbers
64933337e3
[media] tvp5150: Add video format registers configuration values

Added constants for each video standard supported by TVP5150, so this patch
get rid of the magic numbers.

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:24:13 -02:00
Jeongtae Park
60659dd495 [media] MAINTAINERS: add a maintainer for s5p-mfc driver
Add a maintainer for s5p-mfc driver.

Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:12:14 -02:00
Kamil Debski
918847341a [media] v4l: add G2D driver for s5p device family
G2D is a 2D graphics accelerator engine present in the s5p family
of Samsung SoCs. It is capable of bitblt and raster operations on
images having dimensions of up to 8000x8000.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 10:11:16 -02:00
Mark Brown
c2b164fa8d Merge branch 'topic/cache' of git://opensource.wolfsonmicro.com/regmap into for-3.3 2011-11-08 11:44:51 +00:00
Mark Brown
8ae0d7e8a9 regmap: Track if the register cache is dirty and suppress unneeded syncs
Allow drivers to optimise out the register cache sync if they didn't need
to do one. If the hardware is desynced from the register cache (by power
loss for example) then the driver should call regcache_mark_dirty() to
let the core know about this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:38:15 +00:00
Mark Brown
b973aa3624 regmap: Fix typo in kerneldoc for regmap_update_bits()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:32:55 +00:00
Mark Brown
7ea7580183 regmap: Fix word wrap in Makefile
80 columns FTW.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:32:31 +00:00
Mark Brown
82732bdd66 regmap: Prepare LZO cache for variable block sizes
Give regcache_lzo_block_count() a copy of the map so that when we decide
we want to make the LZO cache more controllable we can more easily do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2011-11-08 11:32:05 +00:00
Mark Brown
f8beab2bb6 regmap: Add a reusable irq_chip for regmap based interrupt controllers
There seem to be lots of regmap-using devices with very similar interrupt
controllers with a small bank of interrupt registers and mask registers
with an interrupt per bit. This won't cover everything but it's a good
start.

Each chip supplies a base for the status registers, a base for the mask
registers, an optional base for writing acknowledgements (which may be the
same as the status registers) and an array of bits within each of these
register banks which indicate the interrupt.

There is an assumption that the bit for each interrupt will be the same
in each of the register bank.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:29:48 +00:00
Kamil Debski
43defb1182 [media] v4l: s5p-mfc: fix reported capabilities
MFC uses the multi-plane API, but it reported single-plane
when querying capabilities.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:06:09 -02:00
Marek Szyprowski
bd50d999d4 [media] media: vb2: reset queued list on REQBUFS(0) call
Queued list was not reset on REQBUFS(0) call. This caused to enqueue a
freed buffer to the driver.

Reported-by: Angela Wan <angela.j.wan@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:05:41 -02:00
Marek Szyprowski
4907602f85 [media] media: vb2: set buffer length correctly for all buffer types
v4l2_planes[plane].length field was not initialized for userptr buffers.
This patch fixes this issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 09:05:23 -02:00
Axel Lin
e94de1e864 ASoC: Avoid a redundant read in cs42l51_pdn_event
snd_soc_update_bits already does read-modify-write,
no need to read the register before calling snd_soc_update_bits.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:02:31 +00:00
Kuninori Morimoto
65ff03f462 ASoC: fsi: add valid data position control support
FSI2 can control valid data position, like
package in front/back or stream  mode (16bit x 2).
But current fsi driver is assuming it was in-back.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08 11:02:00 +00:00
Marek Szyprowski
2c2dd6ac73 [media] media: vb2: add a check for uninitialized buffer
__buffer_in_use() might be called for empty/uninitialized buffer in the
following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes
kernel ops in such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:59:33 -02:00
Mark Brown
aaed44e167 ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore
The gpio_base for the PMIC on the CPU module was being incorrectly set to
be the same as that for the CODEC causing the two GPIO drivers to collide.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-08 19:56:03 +09:00
Mark Brown
4ff13995b5 ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms
The conversion to use SAMSUNG_GPIO_EXTRA rather than S3C24XX_GPIO_EXTRA
broke a number of S3C64xx boards which had been using the symbols provided
to reserve a range of GPIOs for board specific use. Fix this by adding
equivalent symbols for the new shared driver and updating the relevant
boards to use the new symbols.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-08 19:56:02 +09:00