After commit b409a7f717 ("ipv6: colocate inet6_cork in
inet_cork_full") we have room in ipv6_pinfo to hold daddr/final
in case they need to be populated in fl6_update_dst() calls.
This will allow stack canary removal in IPv6 tx fast paths.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wU6p
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter updates for *net-next*:
1) Fix net-next-only use-after-free bug in nf_tables rbtree set:
Expired elements cannot be released right away after unlink anymore
because there is no guarantee that the binary-search blob is going to
be updated. Spotted by syzkaller.
2) Fix esoteric bug in nf_queue with udp fraglist gro, broken since
6.11. Patch 3 adds extends the nfqueue selftest for this.
4) Use dedicated slab for flowtable entries, currently the -512 cache
is used, which is wasteful. From Qingfang Deng.
5) Recent net-next update extended existing test for ip6ip6 tunnels, add
the required /config entry. Test still passed by accident because the
previous tests network setup gets re-used, so also update the test so
it will fail in case the ip6ip6 tunnel interface cannot be added.
6) Fix 'nft get element mytable myset { 1.2.3.4 }' on big endian
platforms, this was broken since code was added in v5.1.
7) Fix nf_tables counter reset support on 32bit platforms, where counter
reset may cause huge values to appear due to wraparound.
Broken since reset feature was added in v6.11. From Anders Grahn.
8-11) update nf_tables rbtree set type to detect partial
operlaps. This will eventually speed up nftables userspace: at this
time userspace does a netlink dump of the set content which slows down
incremental updates on interval sets. From Pablo Neira Ayuso.
* tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_rbtree: validate open interval overlap
netfilter: nft_set_rbtree: validate element belonging to interval
netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets
netfilter: nft_set_rbtree: fix bogus EEXIST with NLM_F_CREATE with null interval
netfilter: nft_counter: fix reset of counters on 32bit archs
netfilter: nft_set_hash: fix get operation on big endian
selftests: netfilter: add IPV6_TUNNEL to config
netfilter: flowtable: dedicated slab for flow entry
selftests: netfilter: nft_queue.sh: add udp fraglist gro test case
netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation
netfilter: nft_set_rbtree: don't gc elements on insert
====================
Link: https://patch.msgid.link/20260206153048.17570-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned struct has an hole and uses unnecessary wide type to
store MAC length and indexes of very small arrays.
It's also embedded into the skb_extensions, and the latter, due
to recent CAN changes, may exceeds the 192 bytes mark (3 cachelines
on x86_64 arch) on some reasonable configurations.
Reordering and the sec_path fields, shrinking xfrm_offload.orig_mac_len
to 16 bits and xfrm_offload.{len,olen,verified_cnt} to u8, we can save
16 bytes and keep skb_extensions size under control.
Before:
struct sec_path {
int len;
int olen;
int verified_cnt;
/* XXX 4 bytes hole, try to pack */$
struct xfrm_state * xvec[6];
struct xfrm_offload ovec[1];
/* size: 88, cachelines: 2, members: 5 */
/* sum members: 84, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
After:
struct sec_path {
struct xfrm_state * xvec[6];
struct xfrm_offload ovec[1];
/* typedef u8 -> __u8 */ unsigned char len;
/* typedef u8 -> __u8 */ unsigned char olen;
/* typedef u8 -> __u8 */ unsigned char verified_cnt;
/* size: 72, cachelines: 2, members: 5 */
/* padding: 1 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://patch.msgid.link/83846bd2e3fa08899bd0162e41bfadfec95e82ef.1770398071.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend struct printk_info to include the task name, pid, and CPU
number where printk messages originate. This information is captured
at vprintk_store() time and propagated through printk_message to
nbcon_write_context, making it available to nbcon console drivers.
This is useful for consoles like netconsole that want to include
execution context in their output, allowing correlation of messages
with specific tasks and CPUs regardless of where the console driver
actually runs.
The feature is controlled by CONFIG_PRINTK_EXECUTION_CTX, which is
automatically selected by CONFIG_NETCONSOLE_DYNAMIC. When disabled,
the helper functions compile to no-ops with no overhead.
Suggested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260206-nbcon-v7-1-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Yang is saying that struct flow_action_entry in
include/net/flow_offload.h has gained new fields and DSA's struct
dsa_mall_policer_tc_entry, derived from that, isn't keeping up.
This structure is passed to drivers and they are completely oblivious to
the values of fields they don't see.
This has happened before, and almost always the solution was to make the
DSA layer thinner and use the upstream data structures. Here, the reason
why we didn't do that is because struct flow_action_entry :: police is
an anonymous structure.
That is easily enough fixable, just name those fields "struct
flow_action_police" and reference them from DSA.
Make the according transformations to the two users (sja1105 and felix):
"rate_bytes_per_sec" -> "rate_bytes_ps".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260206075427.44733-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the HBH jumbo helpers are not used by any driver or GSO, remove
them altogether.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-13-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIG TCP IPv6 inserts a hop-by-hop extension header to indicate the real
IPv6 payload length when it doesn't fit into the 16-bit field in the
IPv6 header itself. While it helps tools parse the packet, it also
requires every driver that supports TSO and BIG TCP to remove this
8-byte extension header. It might not sound that bad until we try to
apply it to tunneled traffic. Currently, the drivers don't attempt to
strip HBH if skb->encapsulation = 1. Moreover, trying to do so would
require dissecting different tunnel protocols and making corresponding
adjustments on case-by-case basis, which would slow down the fastpath
(potentially also requiring adjusting checksums in outer headers).
At the same time, BIG TCP IPv4 doesn't insert any extra headers and just
calculates the payload length from skb->len, significantly simplifying
implementing BIG TCP for tunnels.
Stop inserting HBH when building BIG TCP GSO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-3-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next commits will transition away from using the hop-by-hop
extension header to encode packet length for BIG TCP. Add wrappers
around ip6->payload_len that return the actual value if it's non-zero,
and calculate it from skb->len if payload_len is set to zero (and a
symmetrical setter).
The new helpers are used wherever the surrounding code supports the
hop-by-hop jumbo header for BIG TCP IPv6, or the corresponding IPv4 code
uses skb_ip_totlen (e.g., in include/net/netfilter/nf_tables_ipv6.h).
No behavioral change in this commit.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-2-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is already (auto)inlined from IPv4 TCP stack.
Make it an inline function to benefit IPv6 as well.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 30/-49 (-19)
Function old new delta
tcp_v6_rcv 3448 3478 +30
__pfx_tcp_filter 16 - -16
tcp_filter 33 - -33
Total: Before=24891904, After=24891885, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260205164329.3401481-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, unhash_nsid() scans the entire system for each netns being
killed, leading to O(L_dying_net * M_alive_net * N_id) complexity, as
__peernet2id() also performs a linear search in the IDR.
Optimize this to O(M_alive_net * N_id) by batching unhash operations. Move
unhash_nsid() out of the per-netns loop in cleanup_net() to perform a
single-pass traversal over survivor namespaces.
Identify dying peers by an 'is_dying' flag, which is set under net_rwsem
write lock after the netns is removed from the global list. This batches
the unhashing work and eliminates the O(L_dying_net) multiplier.
To minimize the impact on struct net size, 'is_dying' is placed in an
existing hole after 'hash_mix' in struct net.
Use a restartable idr_get_next() loop for iteration. This avoids the
unsafe modification issue inherent to idr_for_each() callbacks and allows
dropping the nsid_lock to safely call sleepy rtnl_net_notifyid().
Clean up redundant nsid_lock and simplify the destruction loop now that
unhashing is centralized.
Signed-off-by: Qiliang Yuan <yuanql9@chinatelecom.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204074854.3506916-1-realwujing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Open intervals do not have an end element, in particular an open
interval at the end of the set is hard to validate because of it is
lacking the end element, and interval validation relies on such end
element to perform the checks.
This patch adds a new flag field to struct nft_set_elem, this is not an
issue because this is a temporary object that is allocated in the stack
from the insert/deactivate path. This flag field is used to specify that
this is the last element in this add/delete command.
The last flag is used, in combination with the start element cookie, to
check if there is a partial overlap, eg.
Already exists: 255.255.255.0-255.255.255.254
Add interval: 255.255.255.0-255.255.255.255
~~~~~~~~~~~~~
start element overlap
Basically, the idea is to check for an existing end element in the set
if there is an overlap with an existing start element.
However, the last open interval can come in any position in the add
command, the corner case can get a bit more complicated:
Already exists: 255.255.255.0-255.255.255.254
Add intervals: 255.255.255.0-255.255.255.255,255.255.255.0-255.255.255.254
~~~~~~~~~~~~~
start element overlap
To catch this overlap, annotate that the new start element is a possible
overlap, then report the overlap if the next element is another start
element that confirms that previous element in an open interval at the
end of the set.
For deletions, do not update the start cookie when deleting an open
interval, otherwise this can trigger spurious EEXIST when adding new
elements.
Unfortunately, there is no NFT_SET_ELEM_INTERVAL_OPEN flag which would
make easier to detect open interval overlaps.
Fixes: 7c84d41416 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_counter_reset() calls u64_stats_add() with a negative value to reset
the counter. This will work on 64bit archs, hence the negative value
added will wrap as a 64bit value which then can wrap the stat counter as
well.
On 32bit archs, the added negative value will wrap as a 32bit value and
_not_ wrapping the stat counter properly. In most cases, this would just
lead to a very large 32bit value being added to the stat counter.
Fix by introducing u64_stats_sub().
Fixes: 4a1d3acd6e ("netfilter: nft_counter: Use u64_stats_t for statistic.")
Signed-off-by: Anders Grahn <anders.grahn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Ulrich reports a regression with nfqueue:
If an application did not set the 'F_GSO' capability flag and a gso
packet with an unconfirmed nf_conn entry is received all packets are
now dropped instead of queued, because the check happens after
skb_gso_segment(). In that case, we did have exclusive ownership
of the skb and its associated conntrack entry. The elevated use
count is due to skb_clone happening via skb_gso_segment().
Move the check so that its peformed vs. the aggregated packet.
Then, annotate the individual segments except the first one so we
can do a 2nd check at reinject time.
For the normal case, where userspace does in-order reinjects, this avoids
packet drops: first reinjected segment continues traversal and confirms
entry, remaining segments observe the confirmed entry.
While at it, simplify nf_ct_drop_unconfirmed(): We only care about
unconfirmed entries with a refcnt > 1, there is no need to special-case
dying entries.
This only happens with UDP. With TCP, the only unconfirmed packet will
be the TCP SYN, those aren't aggregated by GRO.
Next patch adds a udpgro test case to cover this scenario.
Reported-by: Ulrich Weber <ulrich.weber@gmail.com>
Fixes: 7d8dc1c7be ("netfilter: nf_queue: drop packets with cloned unconfirmed conntracks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Currently we are registering one dynamic lockdep key for each allocated
qdisc, to avoid false deadlock reports when mirred (or TC eBPF) redirects
packets to another device while the root lock is acquired [1].
Since dynamic keys are a limited resource, we can save them at least for
qdiscs that are not meant to acquire the root lock in the traffic path,
or to carry traffic at all, like:
- clsact
- ingress
- noqueue
Don't register dynamic keys for the above schedulers, so that we hit
MAX_LOCKDEP_KEYS later in our tests.
[1] https://github.com/multipath-tcp/mptcp_net-next/issues/451
Changes in v2:
- change ordering of spin_lock_init() vs. lockdep_register_key()
(Jakub Kicinski)
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/94448f7fa7c4f52d2ce416a4895ec87d456d7417.1770220576.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only called once from inet_csk_listen_start(), it can be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some functions do not modify the pointed-to data, but lack const
qualifiers. Add const qualifiers to the arguments of
flow_rule_match_has_control_flags() and flow_cls_offload_flow_rule().
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260204052839.198602-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the DPLL core to support associating a DPLL pin with a firmware
node. This association is required to allow other subsystems (such as
network drivers) to locate and request specific DPLL pins defined in
the Device Tree or ACPI.
* Add a .fwnode field to the struct dpll_pin
* Introduce dpll_pin_fwnode_set() helper to allow the provider driver
to associate a pin with a fwnode after the pin has been allocated
* Introduce fwnode_dpll_pin_find() helper to allow consumers to search
for a registered DPLL pin using its associated fwnode handle
* Ensure the fwnode reference is properly released in dpll_pin_put()
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the driver has an inconsistent behaviour between modes when it
comes to oversized packets that are not dropped through the physical MTU
check in HW. This can happen for Multi Host configurations where each
port has a different MTU.
Current behavior:
1) Striding RQ in linear mode drops the packet in SW and counts it
with oversize_pkts_sw_drop.
2) Striding RQ in non-linear mode allows it like a normal packet.
3) Legacy RQ can't receive oversized packets by design:
the RX WQE uses MTU sized packet buffers.
This inconsistency is not a violation of the netdev policy [1]
but it is better to be consistent across modes.
This patch aligns (2) with (1) and (3). One exception is added for
LRO: don't drop the oversized packet if it is an LRO packet.
As now rq->hw_mtu always needs to be updated during the MTU change flow,
drop the reset avoidance optimization from mlx5e_change_mtu().
Extract the CQE LRO segments reading into a helper function as it
is used twice now.
[1] Documentation/networking/netdevices.rst#L205
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix numerous (many) kernel-doc warnings in iucv.[ch]:
- convert function documentation comments to a common (kernel-doc) look,
even for static functions (without "/**")
- use matching parameter and parameter description names
- use better wording in function descriptions (Jakub & AI)
- remove duplicate kernel-doc comments from the header file (Jakub)
Examples:
Warning: include/net/iucv/iucv.h:210 missing initial short description
on line: * iucv_unregister
Warning: include/net/iucv/iucv.h:216 function parameter 'handle' not
described in 'iucv_unregister'
Warning: include/net/iucv/iucv.h:467 function parameter 'answer' not
described in 'iucv_message_send2way'
Warning: net/iucv/iucv.c:727 missing initial short description on line:
* iucv_cleanup_queue
Build-tested with both "make htmldocs" and "make ARCH=s390 defconfig all".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260203075248.1177869-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In include/linux/stmmac.h clk_csr_i is spelled as clk_scr_i by mistake,
so correct the typo.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20260203062658.2156653-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- ath drivers: small features/cleanups
- rtw drivers: mostly refactoring for rtw89 RTL8922DE support
- mac80211: use hrtimers for CAC to avoid too long delays
- cfg80211/mac80211: some initial UHR (Wi-Fi 8) support
-----BEGIN PGP SIGNATURE-----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=/NUu
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some more changes, including pulls from drivers:
- ath drivers: small features/cleanups
- rtw drivers: mostly refactoring for rtw89 RTL8922DE support
- mac80211: use hrtimers for CAC to avoid too long delays
- cfg80211/mac80211: some initial UHR (Wi-Fi 8) support
* tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (59 commits)
wifi: brcmsmac: phy: Remove unreachable error handling code
wifi: mac80211: Add eMLSR/eMLMR action frame parsing support
wifi: mac80211: add initial UHR support
wifi: cfg80211: add initial UHR support
wifi: ieee80211: add some initial UHR definitions
wifi: mac80211: use wiphy_hrtimer_work for CAC timeout
wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard comments
wifi: ath12k: clear stale link mapping of ahvif->links_map
wifi: ath12k: Add support TX hardware queue stats
wifi: ath12k: Add support RX PDEV stats
wifi: ath12k: Fix index decrement when array_len is zero
wifi: ath12k: support OBSS PD configuration for AP mode
wifi: ath12k: add WMI support for spatial reuse parameter configuration
dt-bindings: net: wireless: ath11k-pci: deprecate 'firmware-name' property
wifi: ath11k: add usecase firmware handling based on device compatible
wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()
wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()
wifi: ath10k: snoc: support powering on the device via pwrseq
wifi: rtw89: pci: warn if SPS OCP happens for RTL8922DE
wifi: rtw89: pci: restore LDO setting after device resume
...
====================
Link: https://patch.msgid.link/20260204121143.181112-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to tcp, provide a new tracepoint to better understand
mptcp_rcv_space_adjust() behavior, which presents many artifacts.
Note that the used format string is so long that I preferred
wrap it, contrary to guidance for quoted strings.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-4-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix multiple streams per host bridge for SEV-TIO
- Drop the TSM ABI for reporting IDE streams (to be replaced)
- Fix virtual function enumeration
- Fix reserved stream ID initialization
- Fix unused variable compiler warning
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaYO2VQAKCRDfioYZHlFs
ZykAAQDiXOK2tcGnIecegUIwuOgo1c1TFV09vbxio4vye/RSXgD+IQmEXNcThvWj
jGNI7KQIrRHlCCz1xGLow/cs3b29gwc=
=mx2y
-----END PGP SIGNATURE-----
Merge tag 'tsm-fixes-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM (TEE security Manager) fixes from Dan Williams:
"The largest change is reverting part of an ABI that never shipped in a
released kernel (Documentation/ABI/testing/sysfs-class-tsm). The fix /
replacement for that is too large to squeeze in at this late date.
The rest is a collection of small fixups:
- Fix multiple streams per host bridge for SEV-TIO
- Drop the TSM ABI for reporting IDE streams (to be replaced)
- Fix virtual function enumeration
- Fix reserved stream ID initialization
- Fix unused variable compiler warning"
* tag 'tsm-fixes-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
crypto/ccp: Allow multiple streams on the same root bridge
crypto/ccp: Use PCI bridge defaults for IDE
coco/tsm: Remove unused variable tsm_rwsem
PCI/IDE: Fix reading a wrong reg for unused sel stream initialization
PCI/IDE: Fix off by one error calculating VF RID range
Revert "PCI/TSM: Report active IDE streams"
Many USB network drivers use identical code to pass ioctl
requests on to the MII layer. Reduce code duplication by
refactoring this code into a helper function.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1)
Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 2-bit tcpi_ecn_mode feild within tcp_info to indicate which ECN
mode is negotiated: ECN_MODE_DISABLED, ECN_MODE_RFC3168, ECN_MODE_ACCECN,
or ECN_MODE_PENDING. This is done by utilizing available bits from
tcpi_accecn_opt_seen (reduced from 16 bits to 2 bits) and
tcpi_accecn_fail_mode (reduced from 16 bits to 4 bits).
Also, an extra 24-bit tcpi_options2 field is identified to represent
newer options and connection features, as all 8 bits of tcpi_options
field have been used.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-14-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Detect spurious retransmission of a previously sent ACK carrying the
AccECN option after the second retransmission. Since this might be caused
by the middlebox dropping ACK with options it does not recognize, disable
the sending of the AccECN option in all subsequent ACKs. This patch
follows Section 3.2.3.2.2 of AccECN spec (RFC9768), and a new field
(accecn_opt_sent_w_dsack) is added to indicate that an AccECN option was
sent with duplicate SACK info.
Also, a new AccECN option sending mode is added to tcp_ecn_option sysctl:
(TCP_ECN_OPTION_PERSIST), which ignores the AccECN fallback policy and
persistently sends AccECN option once it fits into TCP option space.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-13-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to Section 3.2.2.1 of AccECN spec (RFC9768), if the Server
is in AccECN mode and in SYN-RCVD state, and if it receives a value of
zero on a pure ACK with SYN=0 and no SACK blocks, for the rest of the
connection the Server MUST NOT set ECT on outgoing packets and MUST
NOT respond to AccECN feedback. Nonetheless, as a Data Receiver it
MUST NOT disable AccECN feedback.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-12-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For Accurate ECN, the first SYN/ACK sent by the TCP server shall set
the ACE flag (Table 1 of RFC9768) and the AccECN option to complete the
capability negotiation. However, if the TCP server needs to retransmit
such a SYN/ACK (for example, because it did not receive an ACK
acknowledging its SYN/ACK, or received a second SYN requesting AccECN
support), the TCP server retransmits the SYN/ACK without the AccECN
option. This is because the SYN/ACK may be lost due to congestion, or a
middlebox may block the AccECN option. Furthermore, if this retransmission
also times out, to expedite connection establishment, the TCP server
should retransmit the SYN/ACK with (AE,CWR,ECE) = (0,0,0) and without the
AccECN option, while maintaining AccECN feedback mode.
This complies with Section 3.2.3.2.2 of the AccECN spec RFC9768.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-10-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before this patch, retransmitted SYN/ACK did not have a specific
synack_type; however, the upcoming patch needs to distinguish between
retransmitted and non-retransmitted SYN/ACK for AccECN negotiation to
transmit the fallback SYN/ACK during AccECN negotiation. Therefore, this
patch introduces a new synack_type (TCP_SYNACK_RETRANS).
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-9-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to Sections 3.1.2 and 3.1.3 of AccECN spec (RFC9768).
In Section 3.1.2, it says an AccECN implementation has no need to
recognize or support the Server response labelled 'Nonce' or ECN-nonce
feedback more generally, as RFC 3540 has been reclassified as Historic.
AccECN is compatible with alternative ECN feedback integrity approaches
to the nonce. The SYN/ACK labelled 'Nonce' with (AE,CWR,ECE) = (1,0,1)
is reserved for future use. A TCP Client (A) that receives such a SYN/ACK
follows the procedure for forward compatibility given in Section 3.1.3.
Then in Section 3.1.3, it says if a TCP Client has sent a SYN requesting
AccECN feedback with (AE,CWR,ECE) = (1,1,1) then receives a SYN/ACK with
the currently reserved combination (AE,CWR,ECE) = (1,0,1) but it does not
have logic specific to such a combination, the Client MUST enable AccECN
mode as if the SYN/ACK onfirmed that the Server supported AccECN and as
if it fed back that the IP-ECN field on the SYN had arrived unchanged.
Fixes: 3cae34274c ("tcp: accecn: AccECN negotiation").
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When AccECN is not successfully negociated for a TCP flow, it defaults
fallback to classic ECN (RFC3168). However, L4S service will fallback
to non-ECN.
This patch enables congestion control module to control whether it
should not fallback to classic ECN after unsuccessful AccECN negotiation.
A new CA module flag (TCP_CONG_NO_FALLBACK_RFC3168) identifies this
behavior expected by the CA.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two flags for congestion control (CC) module are added in this patch
related to AccECN negotiation. First, a new flag (TCP_CONG_NEEDS_ACCECN)
defines that the CC expects to negotiate AccECN functionality using the
ECE, CWR and AE flags in the TCP header.
Second, during ECN negotiation, ECT(0) in the IP header is used. This
patch enables CC to control whether ECT(0) or ECT(1) should be used on
a per-segment basis. A new flag (TCP_CONG_ECT_1_NEGOTIATION) defines the
expected ECT value in the IP header by the CA when not-yet initialized
for the connection.
The detailed AccECN negotiaotn can be found in IETF RFC9768.
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add newly acked pkts EWMA. When ACK thinning occurs, select
between safer and unsafe cep delta in AccECN processing based
on it. If the packets ACKed per ACK tends to be large, don't
conservatively assume ACE field overflow.
This patch uses the existing 2-byte holes in the rx group for new
u16 variables withtout creating more holes. Below are the pahole
outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
/* XXX 4 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 177 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
u16 pkts_acked_ewma; /* 2756 2 */
/* XXX 2 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 178 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Last user dsa_loop has been migrated away from modalias-based matching,
so we can remove this feature now. It was the only user of MDIO_NAME_SIZE,
so remove also this constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export struct tcp_splice_state and tcp_splice_data_recv() in net/tcp.h
so that they can be used by MPTCP in the next patch.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-3-31332ba70d7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add optional support for device notifications in VMClock. When
supported, the hypervisor will send a device notification every time it
updates the seq_count to a new even value.
Moreover, add support for poll() in VMClock as a means to propagate this
notification to user space. poll() will return a POLLIN event to
listeners every time seq_count changes to a value different than the one
last seen (since open() or last read()/pread()). This means that when
poll() returns a POLLIN event, listeners need to use read() to observe
what has changed and update the reader's view of seq_count. In other
words, after a poll() returned, all subsequent calls to poll() will
immediately return with a POLLIN event until the listener calls read().
The device advertises support for the notification mechanism by setting
flag VMCLOCK_FLAG_NOTIFICATION_PRESENT in vmclock_abi flags field. If
the flag is not present the driver won't setup the ACPI notification
handler and poll() will always immediately return POLLHUP.
Signed-off-by: Babis Chalios <bchalios@amazon.es>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://patch.msgid.link/20260130173704.12575-3-itazur@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to live migration, loading a VM from some saved state (aka
snapshot) is also an event that calls for clock adjustments in the
guest. However, guests might want to take more actions as a response to
such events, e.g. as discarding UUIDs, resetting network connections,
reseeding entropy pools, etc. These are actions that guests don't
typically take during live migration, so add a new field in the
vmclock_abi called vm_generation_counter which informs the guest about
such events.
Hypervisor advertises support for vm_generation_counter through the
VMCLOCK_FLAG_VM_GEN_COUNTER_PRESENT flag. Users need to check the
presence of this bit in vmclock_abi flags field before using this flag.
Signed-off-by: Babis Chalios <bchalios@amazon.es>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Takahiro Itazur <itazur@amazon.com>
Link: https://patch.msgid.link/20260130173704.12575-2-itazur@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
