This GPIO expander is used for controlling various muxes on the board.
By default select audio functionality over VIN6 by setting the P1
(vin6_sel_s0) pin to low.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
TPS77018DBVT is used to create 1.8V from avm_3v3_sw's 3.3V connected to
aic3106's DVDD.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use the name for the supply as it is in the schematics since the same
supply is used for other peripherals than MMC2, like audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit cb7323fffa ("lockd: create and use per-net NSM
RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.
E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.
1. nsm_monitor(host_X) called => NSM rpc client created,
nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
dereference of *ln->nsm_clnt
So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This moves the hole in the struct down below the flags fields, which
allows us to potentially add a new flag without growing the struct.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove unneeded NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ expression x; @@
-if (x != NULL) {
\(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
x = NULL;
-}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andrew was seeing a race occur when an OPEN and OPEN_DOWNGRADE were
running in parallel. The server would receive the OPEN_DOWNGRADE first
and check its seqid, but then an OPEN would race in and bump it. The
OPEN_DOWNGRADE would then complete and bump the seqid again. The result
was that the OPEN_DOWNGRADE would be applied after the OPEN, even though
it should have been rejected since the seqid changed.
The only recourse we have here I think is to serialize operations that
bump the seqid in a stateid, particularly when we're given a seqid in
the call. To address this, we add a new rw_semaphore to the
nfs4_ol_stateid struct. We do a down_write prior to checking the seqid
after looking up the stateid to ensure that nothing else is going to
bump it while we're operating on it.
In the case of OPEN, we do a down_read, as the call doesn't contain a
seqid. Those can run in parallel -- we just need to serialize them when
there is a concurrent OPEN_DOWNGRADE or CLOSE.
LOCK and LOCKU however always take the write lock as there is no
opportunity for parallelizing those.
Reported-and-Tested-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once genpd could be configured to be built with CONFIG_PM_RUNTIME unset
(nowadays CONFIG_PM), the pm_genpd_poweron() API served a purpose, since
it allowed users to power on a PM domain.
As such configuration no longer is supported, users shall solely rely on
using some of the runtime PM APIs to power on a PM domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As the last user of the pm_genpd_poweroff_unused() API has moved into
relying on genpd to deal with this internally from a late_initcall, let's
remove the API.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Genpd tries from a late_initcall to disable unused PM domains, which makes
it unnecessary to also manage this from any earlier phase when for example
initializing a genpd.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit ba2bbfbf63 ("PM / Domains: Remove intermediate states..") changed
the power off sequence (pm_genpd_poweroff()), which from locking point of
view means the genpd mutex is held throughout the sequence.
The above change means the in_progress counter can't be updated while
pm_genpd_poweroff() is executing, which allows us to remove the counter.
Instead we inform pm_genpd_poweroff() via a bool parameter, to indicate
whether we call it from the scheduled work or from the ->runtime_suspend()
callback, since that all that matters.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
for ARM64.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
We should always type-cast pointer to "long" or "unsigned long"
because size of pointer is same as machine word size. This will
avoid pointer type-cast issues on both 32bit and 64bit systems.
This patch fixes pointer type-cast issue in brcmnand_write()
as-per above info.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Now that the ACPI processor driver has been decoupled from
the C states and P states functionality, make it selectable on
ARM64 so that it can be used by others e.g. CPPC.
The C states and P states code is selected only on X86 or
IA64 until the relevant support is added on ARM64.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For each detected ACPI Processor object (ACPI0007), search its
device handle for CPPC specific tables (i.e. _CPC) and extract
CPU specific performance capabilities.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add weak functions for architectures which do not support
hot-adding and removing CPUs which aren't detected at
bootup. (e.g. via MADT).
This helps preserve the Kconfig dependency from:
commit cbfc1bae55 ("[ACPI] ACPI_HOTPLUG_CPU Kconfig dependency
update")
prevent:
HOTPLUG_CPU=y
ACPI_PROCESSOR=y
ACPI_HOTPLUG_CPU=n
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver utilizes the methods introduced in a previous
patch titled - "ACPI: Introduce CPU performance controls using CPPC"
and enables usage with existing CPUFreq governors.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After finishing building free nid cache, we will try to readahead
asynchronously 4 more pages for the next reloading, the count of
readahead nid pages is fixed.
In some case, like SMR drive, read less sectors with fixed count
each time we trigger RA may be low efficient, since we will face
high seeking overhead, so we'd better let user to configure this
parameter from sysfs in specific workload.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When there is no free nid in nid cache, all new node allocaters stop their
job to wait for reloading of free nids, however reloading is synchronous as
we will read 4 NAT pages for building nid cache, it cause the long latency.
This patch tries to readahead more NAT pages with READA request flag after
reloading of free nids. It helps to improve performance when users allocate
node id intensively.
Env: Sandisk 32G sd card
time for i in `seq 1 60000`; { echo -n > /mnt/f2fs/$i; echo XXXXXX > /mnt/f2fs/$i;}
Before:
real 0m2.814s
user 0m1.220s
sys 0m1.536s
After:
real 0m2.711s
user 0m1.136s
sys 0m1.568s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, we use ra_meta_pages to reads continuous physical blocks as much as
possible to improve performance of following reads. However, ra_meta_pages
uses a synchronous readahead approach by submitting bio with READ, as READ
is with high priority, it can not be used in the case of preloading blocks,
and it's not sure when these RAed pages will be used.
This patch supports asynchronous readahead in ra_meta_pages by tagging bio
with READA flag in order to allow preloading.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In recovery or checkpoint flow, we grab pages temperarily in meta inode's
mapping for caching temperary data, actually, datas in these pages were
not meta data of f2fs, but still we tag them with REQ_META flag. However,
lower device like eMMC may do some optimization for data of such type.
So in order to avoid wrong optimization, we'd better remove such flag
for temperary non-meta pages.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a tracepoint for f2fs_read_data_pages to trace when pages
are readahead by VFS.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
CPPC stands for Collaborative Processor Performance Controls
and is defined in the ACPI v5.0+ spec. It describes CPU
performance controls on an abstract and continuous scale
allowing the platform (e.g. remote power processor) to flexibly
optimize CPU performance with its knowledge of power budgets
and other architecture specific knowledge.
This patch adds a shim which exports commonly used functions
to get and set CPPC specific controls for each CPU. This enables
CPUFreq drivers to gather per CPU performance data and use
with exisiting governors or even allows for customized governors
which are implemented inside CPUFreq drivers.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For normal inodes, their pages are allocated with __GFP_FS, which can cause
filesystem calls when reclaiming memory.
This can incur a dead lock condition accordingly.
So, this patch addresses this problem by introducing
f2fs_grab_cache_page(.., bool for_write), which calls
grab_cache_page_write_begin() with AOP_FLAG_NOFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_collapse_range and f2fs_insert_range changes the block addresses
directly. But that can cause uncovered SSA updates.
In that case, we need to give up to change the block addresses and do buffered
writes to keep filesystem consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The periodic checkpoint can resolve the previous issue.
So, now we can use this again to improve the reported performance regression:
https://lkml.org/lkml/2015/10/8/20
This reverts commit 15bec0ff5a9ba6d203178fa8772259df6207942a.
This patch introduces F2FS_GOING_DOWN_METAFLUSH which flushes meta pages like
SSA blocks and then blocks all the writes.
This can be used by power-failure tests.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit bac2a909a0 (PCI / PM: Avoid resuming PCI devices during
system suspend) introduced a mechanism by which some PCI devices that
were runtime-suspended at the system suspend time might be left in
that state for the duration of the system suspend-resume cycle.
However, it overlooked devices that were marked as capable of waking
up the system just because PME support was detected in their PCI
config space.
Namely, in that case, device_can_wakeup(dev) returns 'true' for the
device and if the device is not configured for system wakeup,
device_may_wakeup(dev) returns 'false' and it will be resumed during
system suspend even though configuring it for system wakeup may not
really make sense at all.
To avoid this problem, simply disable PME for PCI devices that have
not been configured for system wakeup and are runtime-suspended at
the system suspend time for the duration of the suspend-resume cycle.
If the device is in D3cold, its config space is not available and it
shouldn't be written to, but that's only possible if the device
has platform PM support and the platform code is responsible for
checking whether or not the device's configuration is suitable for
system suspend in that case.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables to load nf_conntrack_netlink module if
NFULNL_CFG_F_CONNTRACK config flag is specified.
Signed-off-by: Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On each next iteration of for_each_compatible_node() the reference
counter for current device node is already decreased by the loop
iterator. The manual call to of_node_get() is required only on loop
break which is not happening here.
The double of_node_get() (with enabled CONFIG_OF_DYNAMIC) lead to
decreasing the counter below expected, initial value.
Fixes: fe4034a3fa ("ARM: EXYNOS: Add missing of_node_put() when parsing power domains")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Compiling the nvme driver on 32-bit warns about a cast from a __u64
variable to a pointer:
drivers/block/nvme-core.c: In function 'nvme_submit_io':
drivers/block/nvme-core.c:1847:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(void __user *)io.addr, length, NULL, 0);
The cast here is intentional and safe, so we can shut up the
gcc warning by adding an intermediate cast to 'uintptr_t'.
I had previously submitted a patch to fix this problem in the
nvme driver, but it was accepted on the same day that two new
warnings got added.
For clarification, I also change the third instance of this cast
to use uintptr_t instead of unsigned long now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d29ec8241c ("nvme: submit internal commands through the block layer")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Compiling the nvme driver on 32-bit warns about a cast from a __u64
variable to a pointer:
drivers/block/nvme-core.c: In function 'nvme_submit_io':
drivers/block/nvme-core.c:1847:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(void __user *)io.addr, length, NULL, 0);
The cast here is intentional and safe, so we can shut up the
gcc warning by adding an intermediate cast to 'uintptr_t'.
I had previously submitted a patch to fix this problem in the
nvme driver, but it was accepted on the same day that two new
warnings got added.
For clarification, I also change the third instance of this cast
to use uintptr_t instead of unsigned long now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d29ec8241c ("nvme: submit internal commands through the block layer")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
for_each_child_of_node performs an of_node_put on each iteration, so
putting an of_node_put before a continue results in a double put.
The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_get(child)
* of_node_put(child);
...
* continue;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk-bcm2835:
clk: bcm2835: Add support for programming the audio domain clocks
clk: bcm2835: Add binding docs for the new platform clock driver.
clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.
This reverts commit 8f2c9544ab.
As it breaks g_ether on my Baytrail FFRD8 device. Everything starts out
fine, but after a bit of data has been transferred it just stops
flowing.
Note that I do get a bunch of these "NOHZ: local_softirq_pending 08"
when booting the machine, but I'm not really sure if they're related
to this problem.
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This reverts commit 70f3a9caa1.
That commit was causing a lockdep splat with g_ether and that
was interfering with proper functionality.
Signed-off-by: Felipe Balbi <balbi@ti.com>
This adds support for enabling, disabling, and setting the rate of the
audio domain clocks. It will be necessary for setting the pixel clock
for HDMI in the VC4 driver and let us write a cpufreq driver. It will
also improve compatibility with user changes to the firmware's
config.txt, since our previous fixed clocks are unaware of it.
The firmware also has support for configuring the clocks through the
mailbox channel, but the pixel clock setup by the firmware doesn't
work, and it's Raspberry Pi specific anyway. The only conflicts we
should have with the firmware would be if we made firmware calls that
result in clock management (like opening firmware V3D or ISP access,
which we don't support in upstream), or on hardware over-thermal or
under-voltage (when the firmware would rewrite PLLB to take the ARM
out of overclock). If that happens, our cached .recalc_rate() results
would be incorrect, but that's no worse than our current state where
we used fixed clocks.
The existing fixed clocks in the code are left in place to provide
backwards compatibility with old device tree files.
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some buses provide a native _update_bits() operation which for uncached
registers is faster than doing a read/modify/write cycle as it is a
single bus transaction. Add support for implementing this to regmap.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWE+cLAAoJECTWi3JdVIfQaCcH/3m85peX2dlE7KhI6gL9N76h
v4w7phygbkQqdD3v9bbbiRavkOMrrBCVNZ28uXIO/52LulrK9pzxRVTuhqdyVasO
CIWfAYinlxWJA0BnJ1E2toqXkym9PEILCixfPyYEI5iZTX3w3rosSdup9MzYTxZZ
N3Vux2bjgCiXp9hYbajITFQ9QRNXzn3hlI/Jl0/x9SkodkzCLJurMq5JAaFE+mhO
1W2S+ERvb0M5bHuyr1Bhf3Bzb8uMFTl1QK3vxRkSI9UVe3MSpQP9SZeN+ye7p7U0
hDlike9FxyLTMMnIe9XnsNEtBZmxNuAb7meF50Bi7xzItRGOIlDxB/Ak55uD4I8=
=hCDC
-----END PGP SIGNATURE-----
Merge tag 'regmap-offload-update-bits' into regmap-next
regmap: Allow buses to provide a custom update_bits() operation
Some buses provide a native _update_bits() operation which for uncached
registers is faster than doing a read/modify/write cycle as it is a
single bus transaction. Add support for implementing this to regmap.
# gpg: Signature made Tue 06 Oct 2015 16:21:47 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key 00000000 occurs more than once in the trustdb
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
