Rather than worrying about exactly where LOCKDEP_SYS_EXIT should
go in the asm code, add it to prepare_exit_from_usermode() and
remove all of the asm calls that are followed by
prepare_exit_to_usermode().
LOCKDEP_SYS_EXIT now appears only in the syscall fast paths.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1736ebe948b845e68120b86b89091f3ec27f5e8e.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Clearing NT is part of the prologue, whereas loading up arg6
makes more sense to think about as part of syscall processing.
Reorder them.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/19eb235828b2d2a52c53459e09f2974e15e65a35.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This tests assumptions about how fast syscall works wrt pt_regs
and, in particular, what happens if IP is decremented by 2
during a syscall.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1c44dbfe59000ba135bbf35ccc5d2433a0b31618.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While the kernel itself doesn't use DWARF unwinding, user code
expects to be able to unwind the vDSO. The vsyscall
(AT_SYSINFO) entry is manually CFI-annotated, and this tests
that it unwinds correctly.
I tested the test by incorrectly annotating __kernel_vsyscall,
and the test indeed fails if I do that.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/8bf736d1925cdd165c0f980156a4248e55af47a1.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This should improve code quality a bit. It also shrinks the kernel text:
Before:
text data bss dec filename
21828379 5194760 1277952 28301091 vmlinux
After:
text data bss dec filename
21827997 5194760 1277952 28300709 vmlinux
... by 382 bytes.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/f427b8002d932e5deab9055e0074bb4e7e80ee39.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GCC doesn't realize that get_user(), put_user(), and their __
variants are unlikely to fail. Tell it.
I noticed this while playing with the C entry code.
Before:
text data bss dec filename
21828763 5194760 1277952 28301475 vmlinux.baseline
After:
text data bss dec filename
21828379 5194760 1277952 28301091 vmlinux.new
The generated code shrunk by 384 bytes.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/dc37bed7024319c3004d950d57151fca6aeacf97.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* some rate scaling fixes and improvements;
* some time-of-flight fixes;
* other generic improvements and clean-ups;
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWEmeEAAoJEKFHnKIaPMX6fEMP/39bRyGi09NwXM5d0svYuBzC
Ch1/hIaK7gWV76coBNjEmMiaBHBeZCNuW4SwfrT4z2WXoenbaJLeKPWps1gR5F4l
TiAUTNNzvp1JzmbCysb8bVisG5wdzqd9t0yvOHCiICpD956PS6aerFQ3LZEIJqmR
0M/GklJuHENX3M3a6aVQCR9iOItNw6MjYXQpYlWK3HCQxmouim+Dru68jUHjYC4+
F5qfuiLCdlAlI3RZ6TNqhMDuY4utFB54FepEqWd1A9x0P+1SJZ3AqDkTFLDNEJzm
y6d6NTreKYpFO7XUvmb1BHa93a1PU0zpiIWmwA2sOYSep7bQcUT5cYn5n/+4DUOB
r/u9/xd6TvC4UYOXCuzrxK58M/vMrHl74uzyo9s/FjtI+dvM3mGRXgs/Zv/CmebQ
i+lLZ31vfuoFl+6NCR6vmWoiW8C0RX7xTok2bIAUeUjtKR26ioIf3KhirXWzvXZL
5dwC1NDTgOCWzUyn21wZsr1G6B9Q+vX0QwWJaezfqB3HzTCrVVt6HDaG8e4QI0n/
n+qRl2g9bbHgI4EWG7fFwEhGvCrl0mLR2DVw3wvaIfFmM8UH7PtRkVPJyGmute1e
Yg6t8rarzlZm4N3cDlPTJMBZ7pjnAYZTtAR7pgAivCrPApt9ZpH+GYs0IXJQY6+L
Gc4hWq2Ahshvf2lv9acw
=NTgB
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
* more clean-ups towards multiple RX queues;
* some rate scaling fixes and improvements;
* some time-of-flight fixes;
* other generic improvements and clean-ups;
Pull strscpy fixes from Chris Metcalf :
"This patch series fixes up a couple of architecture issues where
strscpy wasn't configured correctly (missing on h8300, duplicating
local and asm-generic copies on powerpc and tile).
It also adds a use of zero_bytemask() to the final store for strscpy
to avoid writing uninitialized data to the destination. However, to
make this work we had to add support for zero_bytemask() to the two
architectures that didn't have it (alpha and tile), because they were
providing their own local copies, but didn't provide the
zero_bytemask() that was previously only required when building with
CONFIG_DCACHE_WORD_ACCESS"
[ Side note: there is still no actual users of strscpy except for the
one preexisting use in arch/tile that predates the generic version.
So this is all about fixing the infrastructure so that we eventually
can start using it. - Linus ]
* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
strscpy: zero any trailing garbage bytes in the destination
word-at-a-time.h: support zero_bytemask() on alpha and tile
word-at-a-time.h: fix some Kbuild files
* mxc_nand: a "refactoring only" change in 4.3-rc1 had some bad pointer
(array) arithmetic. Fix that
* sunxi_nand:
- Fix an old list manipulation / memory management bug in the device
release() code path
- Correct a few mistakes in OOB write support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=A7qE
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20151006' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"A few MTD fixes:
- mxc_nand: a "refactoring only" change in 4.3-rc1 had some bad
pointer (array) arithmetic. Fix that
- sunxi_nand:
- Fix an old list manipulation / memory management bug in the device
release() code path
- Correct a few mistakes in OOB write support"
* tag 'for-linus-20151006' of git://git.infradead.org/linux-mtd:
mxc_nand: fix copy_spare
mtd: nand: sunxi: fix sunxi_nand_chips_cleanup()
mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions
* fix for CSA when the AP is stopped during a channel switch;
* fix firmware name for 3160 devices;
* add some new PCI IDs for 7265 devices;
* fix CT-kill entry;
* fix kernel panic when a sysassert occurs in the init ucode flow;
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWEly7AAoJEKFHnKIaPMX6gpMP/2l7TAlCHTeNj1S8QMa6mOnw
HhBgtu/U/dwy0ry1KzVJArspAjpIdrizPvPmuJMO6+gSlHRHz8YMrLMYGTelKrdP
rMX4Ir+kyrywKJjKpquwwWv1pT7m7r5Y/tAEXauxnf/z3yJ6zwGc7G2aP3BWUo9E
+GwDEzvu/pPDpxI3ZjiEyZkbk2SA1DJk5TRzrJhUxdYSa8WF7dOxQBuTcZz1H/Vt
/ctWxAUnaDyciBpWDm31q8YJFzwbFysT50NbUU1xmvWBxDMlVJXU20G9tj0cLCda
PF1CcZxT/oeRJ+pvm8M6GyxWutf8s/5ALLEmNK02255Ht1+4PfnDEGiGYYJp/cU6
pZ3Vt4PyH7h8yDizSguS/jcwA7PMNVbk1h2KcHX76U+vrffeNudp4eH97WeG9TB1
9RPHnEMpM6p9wEluniqdyDlhFokR+IHwzmjj/+JGwszWGx97RmA8JGFJNOaVwhGC
xI8EWFIODW2uNRdIc1aej9ridWrcos5Hkm4GZWlXzm8TXvGFUrESAHlfC9HnRABA
imwGV2svVLtrbo9h1GCk/wGQvZvmxfQEEAdHWbVsV8cygJ+B8CzgrXz4G+d8qZb5
SKN7nMXvcpaM6lLdo4brQQzl1ZpB7+Ucy8F5lhN1bBrhRszNwF/sL/z43G8+/AN4
jiVw1hD18tzXwBZ6rF0/
=UHbJ
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-for-kalle-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* some fixes for PN key programming when entering D3;
* fix for CSA when the AP is stopped during a channel switch;
* fix firmware name for 3160 devices;
* add some new PCI IDs for 7265 devices;
* fix CT-kill entry;
* fix kernel panic when a sysassert occurs in the init ucode flow;
Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation voluntarily
- Fix a tracepoint NULL-pointer dereference
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoNS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix a use-after-free bug in the RPC/RDMA client
- Fix a write performance regression
- Fix up page writeback accounting
- Don't try to reclaim unused state owners
- Fix a NFSv4 nograce recovery hang
- reset states to use open_stateid when returning delegation
voluntarily
- Fix a tracepoint NULL-pointer dereference"
* tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a tracepoint NULL-pointer dereference
nfs4: reset states to use open_stateid when returning delegation voluntarily
NFSv4: Fix a nograce recovery hang
NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH
NFSv4: Don't try to reclaim unused state owners
NFS: Fix a write performance regression
NFS: Fix up page writeback accounting
xprtrdma: disconnect and flush cqs before freeing buffers
This reverts commit 998ef75ddb.
The commit itself does not appear to be buggy per se, but it is exposing
a bug in ext4 (and Ted thinks ext3 too, but we solved that by getting
rid of it). It's too late in the release cycle to really worry about
this, even if Dave Hansen has a patch that may actually fix the
underlying ext4 problem. We can (and should) revisit this for the next
release.
The problem is that moving the prefaulting later now exposes a special
case with partially successful writes that isn't handled correctly. And
the prefaulting likely isn't normally even that much of a performance
issue - it looks like at least one reason Dave saw this in his
performance tests is that he also ran them on Skylake that now supports
the new SMAP code, which makes the normally very cheap user space
prefaulting noticeably more expensive.
Bisected-and-acked-by: Ted Ts'o <tytso@mit.edu>
Analyzed-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The scheduled process area is currently allocated before assigning the
correct maximum processes to the AFU, which will mean we only ever
allocate a fixed number of pages for the scheduled process area. This
will limit us to 958 processes with 2 x 64K pages. If we try to use more
processes than that we'd probably overrun the buffer and corrupt memory
or crash.
AFUs that require three or more interrupts per process will not be
affected as they are already limited to less processes than that, but we
could hit it on an AFU that requires 0, 1 or 2 interrupts per process,
or when using 4K pages.
This patch moves the initialisation of the num_procs to before the SPA
allocation so that enough pages will be allocated for the number of
processes that the AFU supports.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
qxl_bo_unref calls drm_gem_object_unreference_unlocked which
locks dev->struct_mutex. However this lock could be already
locked if the call came from qxl_gem_object_free.
As we don't need to call qxl_bo_ref/qxl_bo_unref cause
qxl_release_list_add will hold a reference by itself avoid
to call them and the possible deadlock.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This avoid a dependency lock error.
According to https://lwn.net/Articles/548909/ users of WW mutex API
should avoid using different context.
When a buffer is reserved with qxl_bo_reserve a ww_mutex_lock without
context is used. However during qxl_draw_dirty_fb different locks
with specific context are used.
This is detected during a machine booting with a debug kernel with lock
dependency checking enabled.
Like many other function in this file to avoid this problem object
pinning is used. Once the object is pinned is not necessary to keep
the lock so it can be released avoiding the locking problem.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit "c0fe07a drm/qxl: rewrite framebuffer support" has a bug in the
dirty rectangle tracking: Instead of ignoring an empty dirty rectangle
when adding a new dirty region the dirty region gets extended to the
upper left corner. Fix it.
Cc: linux-stable@vger.kernel.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Broadcom Bluetooth controllers have the chip name included in the
ROM firmware or later in the patchram firmware. For debugging purposes
read the local name and print it out. This is only done during setup
stage and only once before loading the firmware and once after loading
the firmware.
For the Broadcom based controllers from Apple, the name is only read once
after determining the chip id.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Define the Porter board dependent part of the SDHI0/2 device nodes along
with the necessary voltage regulators (note that the Vcc regulators are
dummy -- they are required but don't actually exist on the board). Also,
GPIOs have to be used for the CD and WP signals due to the SDHI driver
constraints...
This patch is analogous to the commit 1299df03d7 ("ARM: shmobile:
henninger: add SDHI0/2 DT support") as there are no differences between
those boards in this respect.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
If CONFIG_PROC_FS is undefined then the arguments of proc_create()
and remove_proc_entry() are unused. As a result the net variables of
ip_vs_conn_net_{init,cleanup} are unused.
net/netfilter/ipvs//ip_vs_conn.c: In function ‘ip_vs_conn_net_init’:
net/netfilter/ipvs//ip_vs_conn.c:1350:14: warning: unused variable ‘net’ [-Wunused-variable]
net/netfilter/ipvs//ip_vs_conn.c: In function ‘ip_vs_conn_net_cleanup’:
net/netfilter/ipvs//ip_vs_conn.c:1361:14: warning: unused variable ‘net’ [-Wunused-variable]
...
Resolve this by dereferencing net as needed rather than storing it
in a variable.
Fixes: 3d99376689 ("ipvs: Pass ipvs not net into ip_vs_control_net_(init|cleanup)")
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Eric's net namespace changes in 1b75097dd7 leaves net unreferenced if
CONFIG_IP_VS_IPV6 is not enabled:
../net/netfilter/ipvs/ip_vs_core.c: In function ‘ip_vs_out’:
../net/netfilter/ipvs/ip_vs_core.c:1177:14: warning: unused variable ‘net’ [-Wunused-variable]
After the net refactoring there is only 1 user; push the reference to the
1 user. While the line length slightly exceeds 80 it seems to be the
best change.
Fixes: 1b75097dd7a26("ipvs: Pass ipvs into ip_vs_out")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
[horms: updated subject]
Signed-off-by: Simon Horman <horms@verge.net.au>
According to the touch controller spec, SPI return a 16 bit value, only 12
bits are valid, they are bit[14-3].
The value of MISO and MOSI can be configured when SPI is in idle mode.
Currently this touch driver assumes the SPI bus sets the MOSI and MISO in
low level when SPI bus is in idle mode. So the bit[15] of the value got
from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in
high level during the SPI idle mode, the bit[15] of the value get from SPI
is always 1. If bit[15] is not masked, we may get the wrong value.
Mask the invalid bit to make sure the correct value gets returned.
Regardless of the SPI bus idle configuration.
Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il>
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no need to explicitly set .owner for the driver, the core will do
it for us.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since reset and wake pin are optional the gpio structure for those
pins may be null. Therefore, they can't be blindly passed to
desc_to_gpio.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 5702222c9a ("Input: joydev - use memdup_user() to duplicate
memory from user-space") changed the kmalloc() and copy_from_user()
with a single call to memdup_user() but wrongly used the same error
path than the old code in which the buffer allocated by kmalloc() was
freed if copy_from_user() failed.
This is of course wrong since if memdup_user() fails, no memory was
allocated and the error in the error-valued pointer should be returned.
Fixes: 5702222c9a ("Input: joydev - use memdup_user() to duplicate
memory from user-space")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file. Fix this by checking if state is NULL
before trying to use the inode pointer.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This enum is not actually used anymore. The only value used from
the enum is DMX_OK, passed as a parameter on two callbacks.
Yet, this value is not used anywhere. So, just remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
NFC_DEBUG is not defined in Kconfig and since DEBUG is not used
anywhere in this directory, we can safely remove this line.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since v3.0 kernel, acer-wmi driver auto detects internal 3G device and
provides the threeg rfkill interface. So the sysfs interface of 3G is
no longer necessary now.
The 7b8aca65 patch added kernel information log to remind to user space
for the threeg sysfs interface will be removed in 2012, then b58b9ffc patch
updated the interface removing time to 2014.
I think the 3 years lead time is enough for user space application to use
rfkill instead of sysfs interface to control 3G device.
This patch removes code about threeg sysfs interface. And it also removes the
unused interface sysfs that exposes which ACPI-WMI method used by acer-wmi
driver on the machine. The information is already exposed by the acer-wmi
initial log.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The %*ph specifier allows to dump small buffers in hex format. Let's use it
instead of passing direct values via stack.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Andy Shevchenko sent me a simple patch that's been sitting on LKML for
10 months for OLPC and asked if I'd take it via platform/drivers/x86.
OLPC appears to be unmaintained per MAINTAINERS. Add it to
platform/drivers/x86 (unless someone else really wants it!)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There are two callbacks still not documented:
.//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_pes_pids'
.//drivers/media/dvb-core/demux.h:422: warning: No description found for parameter 'get_stc'
The purpose of first one is clear. The second one is used only
on the obsolete av7110 driver, and its purpose is not clear,
as it just returns a 64-bit word from the firmware to userspace.
Let's document get_pes_pids and mark get_stc as private, adding
a comment to not use it, while this is not documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are two DVB demux callbacks and ioctls that aren't documented
and aren't used at all by the DVB core or by any DVB driver upstream.
Let's comment out the code for those two ioctls and remove on some
future version.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are a few inconsistencies between the old documentation
that got imported into the header and the current status.
Update them, and use the proper doc-nano nomenclature for
struct artuments "@", instead of foo().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The DocBook/media/dvb/kdapi.xml contains the description of
the kABI for DVB. The problem is that, by being maintained
on a separate file and not being updated for years, it got
outdated. So, for example, some callback parameters were
changed, but the DocBook were still using the old stuff.
As a first step to fix it, let's move the documentation of
struct dmx_demux into demux.h and fix the parameters used
there.
For now, don't document any other field nor touch the
descriptions that got moved, letting this job to other
patches. That makes easier to review the patch.
PS.: Please notice that an additional patch will be needed
in order to fix the return values (some uses non-existent
return codes) and to the functions and callbacks mentioned at
the descriptions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are several CodingStyle violations at the DVB code. While
we won't be fixing them as a hole, let's fix at least the
headers, as we're touching on them already in order to properly
document them.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This struct is already documented at the header file, but it is
not using Kernel doc-nano format. Convert to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The function can return negative value, assigning it to unsigned
variable can cause memory corruption.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/1444122017-16856-1-git-send-email-a.hajda@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.
$ perf report -F +overhead
0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
1506 {
#0 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
#1 0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
#2 0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
#3 0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
#4 0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
#5 0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
#6 0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
#7 0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
#8 0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606
Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will allow to register output column from ui code and
respect taken sort/output dimensions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call reset_dimensions within __setup_output_field
function. It's already called in its caller setup_sorting right before
perf_hpp__init, which will be changed in following patch to respect
taken dimension.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In f309d44431 ("platform_device: better support builtin boilerplate
avoidance"), we introduced the builtin_driver() macro.
Here we use that support and extend it to PCI driver registration, so where
a driver is clearly non-modular and builtin-only, we can register it in a
similar fashion. Existing code that is clearly non-modular can be updated
with the simple mapping of
module_pci_driver(...) ---> builtin_pci_driver(...)
We've essentially cloned the former to make the latter, and taken out the
remove/module_exit parts since those never get used in a non-modular build
of the code.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The ID and period for the backlight PWM are obtained from a PWM lookup
table, so the corresponding values don't need to be duplicated into the
platform data.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
HDMI sinks are permitted to de-assert and re-assert the HPD signal to
indicate that their EDID has been updated, which may not involve a
change of video information.
An example of where such a situation can arise is when an AV receiver
is connected between the source and the display device. Events which
can cause the HPD to be deasserted include:
* turning on or switching to standby the AV receiver.
* turning on or switching to standby the display device.
Each of these can change the entire EDID data, or just a part of the
EDID data - it's up to the connected HDMI sink to do what they desire
here. For example
- with the AV receiver and display device both in standby, a source
connected to the AV receiver may provide its own EDID to the source.
- turning on the display device causes the display device's EDID to be
made available in an unmodified form to the source.
- subsequently turning on the AV receiver then provides a modified
version of the display device's EDID.
Moreover, HPD doesn't tell us whether something is actually listening
on the HDMI TDMS signals. The phy gives us a set of RXSENSE indications
which tell us whether there is a sink connected to the TMDS signals.
Currently, we use the HPD signal to enable or disable the HDMI block,
which is questionable when HPD is used in this manner. Using the
RXSENSE would be more appropriate, but there is some bad behaviour
which needs to be coped with. The iMX6 implementation lets the TMDS
signals float when the phy is "powered down", which cause spurious
interrupts. Rather than just using RXSENSE, use RXSENSE and HPD
becoming both active to signal the presence of a device, but loss
of RXSENSE to indicate that the device has been unplugged.
The side effect of this change is that a sink deasserting the HPD
signal to cause a re-read of the EDID data will not cause the bridge
to immediately disable the video signal.
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When connected to HDMI sources, some DVI monitors de-assert their HPD
signal and TDMS loads for one seconds every four seconds when there is
no signal present on the connection.
Unfortunately, this behaviour is indistinguishable from a proper HDMI
setup with an AV receiver in the path to the display: the HDMI spec
requires us to detect HPD deassertions as short as 100ms, which indicate
that the EDID has changed.
Since it is possible to connect a DVI monitor to an AV receiver and then
to a HDMI source, merely working around this by detecting the lack of
HDMI vendor block in the EDID is insufficient - the AV receiver is at
liberty to modify the EDID as it sees fit, and it will place its own
parameters into the EDID including the HDMI vendor block.
DRM has support for forcing the state of a connector, which we should
implement to allow us to work around these broken DVI monitors - we can
tell DRM to force the connection state to indicate that there is always
a device connected to work around this problem. Although this requires
manual configuration, it is better than nothing at all.
When a forced connection state has been set, there is no point handling
our RXSENSE interrupts, so disable them in this circumstance.
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add support for interlaced video modes to the dw_hdmi bridge. This
mainly involves halving the vertical parameters to be programmed into
the bridge registers, and setting the interlace_allowed connector flag.
This brings working 1080i support. However, 480i and 576i fail to
work due to the lack of proper pixel repetition support, which is not
trivial to add due to the tabular PLL parameterisation. Hence, we
filter out these modes in our mode_valid() method.
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
