[ Upstream commit 12659d2861 ]
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 537a2525ea ]
There are a number of tools (bpftool, selftests), that require a
"bootstrap" build. Here, a bootstrap build is a build host variant of
a target. E.g., assume that you're performing a bpftool cross-build on
x86 to riscv, a bootstrap build would then be an x86 variant of
bpftool. The typical way to perform the host build variant, is to pass
"ARCH=" in a sub-make. However, if a variable has been set with a
command argument, then ordinary assignments in the makefile are
ignored.
This side-effect results in that ARCH, and variables depending on ARCH
are not set. Workaround by overriding ARCH to the host arch, if ARCH
is empty.
Fixes: 8859b0da5a ("tools/bpftool: Fix cross-build")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20241127101748.165693-1-bjorn@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef3ba8c258 ]
A NULL pointer dereference could occur if ksyms
is not properly checked before usage in the prog_dump() function.
Fixes: b053b439b7 ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump")
Signed-off-by: Amir Mohammadi <amiremohamadi@yahoo.com>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241121083413.7214-1-amiremohamadi@yahoo.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f36ee29e7 ]
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Fixes: 685a21c314 ("test/vsock: add big message test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce1c0921a ]
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fb ("vsock_test: POLLIN + SO_RCVLOWAT test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8f34747bd ]
The correct exit code to mark a test as skipped is 4.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Link: https://patch.msgid.link/20241126135850.76493-1-mheyne@amazon.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4a159e6049 upstream.
When do perf stat on sys metric, perf tool output nothing now:
$ perf stat -a -M imx95_ddr_read.all -I 1000
$
This command runs on an arm64 machine and the Soc has one DDR hw pmu
except one armv8_cortex_a55 pmu. Their maps show as follows:
const struct pmu_events_map pmu_events_map[] = {
{
.arch = "arm64",
.cpuid = "0x00000000410fd050",
.event_table = {
.pmus = pmu_events__arm_cortex_a55,
.num_pmus = ARRAY_SIZE(pmu_events__arm_cortex_a55)
},
.metric_table = {
.pmus = NULL,
.num_pmus = 0
}
},
static const struct pmu_sys_events pmu_sys_event_tables[] = {
{
.event_table = {
.pmus = pmu_events__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_events__freescale_imx95_sys)
},
.metric_table = {
.pmus = pmu_metrics__freescale_imx95_sys,
.num_pmus = ARRAY_SIZE(pmu_metrics__freescale_imx95_sys)
},
.name = "pmu_events__freescale_imx95_sys",
},
Currently, pmu_metrics_table__find() will return NULL when only do perf
stat on sys metric. Then parse_groups() will never be called to parse
sys metric_name, finally perf tool will exit directly. This should be a
common problem.
To fix the issue, this will keep the logic before commit f20c15d13f
("perf pmu-events: Remember the perf_events_map for a PMU") to return a
empty metric table rather than a NULL pointer.
This should be fine since the removed part just check if the table match
provided metric_name. Without these code, the code in parse_groups()
will also check the validity of metrci_name too.
Fixes: f20c15d13f ("perf pmu-events: Remember the perf_events_map for a PMU")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107162035.52206-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1da0daf746 ]
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fed8511cc8 ]
parse_cpu_string() parses the string input either from command line or
from /sys/fs/cgroup/cpuset.cpus.effective to get a list of CPUs that
turbostat can run with.
The cpu string returned by /sys/fs/cgroup/cpuset.cpus.effective contains
a trailing '\n', but strtoul() fails to treat this as an error.
That says, for the code below
val = ("\n", NULL, 10);
val returns 0, and errno is also not set.
As a result, CPU0 is erroneously considered as allowed CPU and this
causes failures when turbostat tries to run on CPU0.
get_counters: Could not migrate to CPU 0
...
turbostat: re-initialized with num_cpus 8, allowed_cpus 5
get_counters: Could not migrate to CPU 0
Add a check to return immediately if '\n' or '\0' is detected.
Fixes: 8c3dd2c9e5 ("tools/power/turbostat: Abstrct function for parsing cpu string")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 711b587581 upstream.
arch-s390.h uses types from std.h, but does not include it.
Depending on the inclusion order the compilation can fail.
Include std.h explicitly to avoid these errors.
Fixes: 404fa87c0e ("tools/nolibc: s390: provide custom implementation for sys_fork")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20240927-nolibc-s390-std-h-v1-1-30442339a6b9@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f13242a464 ]
Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE,
with errors such as:
# RUN mount_setattr_idmapped.invalid_fd_negative ...
mkfs.ext4: No space left on device while writing out and closing file system
# mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0)
# invalid_fd_negative: Test terminated by assertion
# FAIL mount_setattr_idmapped.invalid_fd_negative
not ok 12 mount_setattr_idmapped.invalid_fd_negative
The code creates a 100,000 byte tmpfs:
ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV,
"size=100000,mode=700"), 0);
And then a little later creates a 2MB ext4 filesystem in that tmpfs:
ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0);
ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0);
At first glance it seems like that should never work, after all 2MB is
larger than 100,000 bytes. However the filesystem image doesn't actually
occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the
ext4.img uses ~84KB of actual space (according to du), which just fits.
However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB,
which is too large to fit in the tmpfs, hence the errors.
It seems fraught to rely on the ext4.img taking less space on disk than
the allocated size, so instead create the tmpfs with a size of 2MB. With
that all 21 tests pass on 64K PAGE_SIZE kernels.
Fixes: 01eadc8dd9 ("tests: add mount_setattr() selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1302e352b2 ]
syscall__scnprintf_args may not place anything in the output buffer
(e.g., because the arguments are all zero). If that happened in
trace__fprintf_sys_enter, its fprintf would receive an unitialized
buffer leading to garbage output.
Fix the problem by passing the (possibly zero) bounds of the argument
buffer to the output fprintf.
Fixes: a98392bb1e ("perf trace: Use beautifiers on syscalls:sys_enter_ handlers")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-2-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fd7c36973 ]
If a perf trace event selector specifies a maximum number of events to output
(i.e., "/nr=N/" syntax), the event printing handler, trace__event_handler,
disables the event selector after the maximum number events are
printed.
Furthermore, trace__event_handler checked if the event selector was
disabled before doing any work. This avoided exceeding the maximum
number of events to print if more events were in the buffer before the
selector was disabled.
However, the event selector can be disabled for reasons other than
exceeding the maximum number of events. In particular, when the traced
subprocess exits, the main loop disables all event selectors. This meant
the last events of a traced subprocess might be lost to the printing
handler's short-circuiting logic.
This nondeterministic problem could be seen by running the following many times:
$ perf trace -e syscalls:sys_enter_exit_group true
trace__event_handler should simply check for exceeding the maximum number of
events to print rather than the state of the event selector.
Fixes: a9c5e6c1e9 ("perf trace: Introduce per-event maximum number of events property")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-1-benjamin@engflow.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb8e56542 ]
trace__fprintf_tp_fields may not print any tracepoint arguments. E.g., if the
argument values are all zero. Previously, this would result in a totally
uninitialized buffer being passed to fprintf, which could lead to garbage on the
console. Fix the problem by passing the number of initialized bytes fprintf.
Fixes: f11b2803bb ("perf trace: Allow choosing how to augment the tracepoint arguments")
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241103204816.7834-1-benjamin@engflow.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5a0a4ab4a ]
When building with custom libtraceevent, below errors occur:
$ make -C tools/perf NO_LIBPYTHON=1 PKG_CONFIG_PATH=<custom libtraceevent>
In file included from util/session.h:5,
from builtin-buildid-list.c:17:
util/trace-event.h:153:10: fatal error: traceevent/event-parse.h: No such file or directory
153 | #include <traceevent/event-parse.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
<snip similar errors of missing headers>
This is because the include path is missed in the cflags. Add it.
Fixes: 0f0e1f4456 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241024133236.31016-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 150dab31d5 ]
In symbol__disassemble_raw(), the created disasm_line should be
discarded before returning an error. When creating disasm_line fails,
break the loop and then release the created lines.
Fixes: 0b971e6bf1 ("perf annotate: Add support to capture and parse raw instruction in powerpc using dso__data_read_offset utility")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: sesse@google.com
Cc: kjain@linux.ibm.com
Link: https://lore.kernel.org/r/20241019154157.282038-3-lihuafei1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e0e9a1e3 ]
The structure disasm_line contains members that require dynamically
allocated memory and need to be freed correctly using
disasm_line__free().
This patch fixes the incorrect release in
symbol__disassemble_capstone().
Fixes: 6d17edc113 ("perf annotate: Use libcapstone to disassemble")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: sesse@google.com
Cc: kjain@linux.ibm.com
Link: https://lore.kernel.org/r/20241019154157.282038-1-lihuafei1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 314909f13c ]
An issue can be observed when probe C++ demangled symbol with steps:
# nm test_cpp_mangle | grep print_data
0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
0000000000000afc T _Z10print_datai
0000000000000b38 T _Z10print_dataR5Point
# perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
...
print_data(Point&)
print_data(int)
...
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
...
When tried to probe symbol "print_data(int)", the log shows:
Symbol print_data(int) address found : afc
The found address is 0xafc - which is right with verifying the output
result from nm. Afterwards when write event, the command uses offset
0xb38 in the last log, which is a wrong address.
The dwarf_diename() gets a common function name, in above case, it
returns string "print_data". As a result, the tool parses the offset
based on the common name. This leads to probe at the wrong symbol
"print_data(Point&)".
To fix the issue, use the die_get_linkage_name() function to retrieve
the distinct linkage name - this is the mangled name for the C++ case.
Based on this unique name, the tool can get a correct offset for
probing. Based on DWARF doc, it is possible the linkage name is missed
in the DIE, it rolls back to use dwarf_diename().
After:
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2d06]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
Added new event:
probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test -aR sleep 1
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
probe-definition(0): test2=print_data(Point&)
symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(Point&) address found : b38
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
Group:probe_test_cpp_mangle Event:test probe:p
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
Added new event:
probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test2 -aR sleep 1
Fixes: fb1587d869 ("perf probe: List probes with line number and file name")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012141432.877894-1-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4585038b8e ]
Add missing dwarf_cfi_end to free memory associated with probe_finder
cfi_eh which is allocated and owned via a call to
dwarf_getcfi_elf. Confusingly cfi_dbg shouldn't be freed as its memory
is owned by the passed in debuginfo struct. Add comments to highlight
this.
This addresses leak sanitizer issues seen in:
tools/perf/tests/shell/test_uprobe_from_different_cu.sh
Fixes: 270bde1e76 ("perf probe: Search both .eh_frame and .debug_frame sections for probe location")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241016235622.52166-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1280f012e0 ]
The insn argument passed to cs_disasm needs freeing. To support
accurately having count, add an additional free_count variable.
Fixes: c5d60de181 ("perf annotate: Add support to use libcapstone in powerpc")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241016235622.52166-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05a62936e6 ]
During the rework of the dso structure in patch ee756ef749 an
increment was forgotten for the symtab_type in case the data for
the kernel module are compressed. This affects the probing of the
kernel modules, which fails if the data are not already cached.
Increment the value of the symtab_type to its compressed variant so the
data could be recovered successfully.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20241010144836.16424-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bff76af96 ]
With the patch 0b6c5371c0 "Add missing topdown metrics events" eight
topdown metric events with numbers ranging from 0x8000 to 0x8700 were
added to the test since they were added as 'perf stat' default events.
Later the patch 951efb9976 "Update no event/metric expectations" kept
only 4 of those events(0x8000-0x8300).
Currently, the topdown events with numbers 0x8400 to 0x8700 are missing
from the list of expected events resulting in a failure. Add back the
missing topdown events.
Fixes: 951efb9976 ("perf test attr: Update no event/metric expectations")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: mpetlan@redhat.com
Link: https://lore.kernel.org/r/20240311081611.7835-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f6ccb70e4 ]
Missed cleanup when an error occurs.
Fixes: 49de179577 ("perf stat: No need to setup affinities when starting a workload")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e880a70f80 ]
When create_perf_stat_counter() failed, it doesn't close workload.cork_fd
open in evlist__prepare_workload(). This could make too many open file
error while __run_perf_stat() repeats.
Introduce evlist__cancel_workload to close workload.cork_fd and
wait workload.child_pid until exit to clear child process
when create_perf_stat_counter() is failed.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: nd@arm.com
Cc: howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240925132022.2650180-2-yeoreum.yun@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: 7f6ccb70e4 ("perf stat: Fix affinity memory leaks on error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d7f85e323 ]
The "perf all PMU test" fails on a Coffee Lake machine.
The failure is caused by the below change in the commit e2641db83f
("perf vendor events: Add/update skylake events/metrics").
+ {
+ "BriefDescription": "This 48-bit fixed counter counts the UCLK cycles",
+ "Counter": "FIXED",
+ "EventCode": "0xff",
+ "EventName": "UNC_CLOCK.SOCKET",
+ "PerPkg": "1",
+ "PublicDescription": "This 48-bit fixed counter counts the UCLK cycles.",
+ "Unit": "cbox_0"
}
The other cbox events have the unit name "CBOX", while the fixed counter
has a unit name "cbox_0". So the events_table will maintain separate
entries for cbox and cbox_0.
The perf_pmus__print_pmu_events() calculates the total number of events,
allocate an aliases buffer, store all the events into the buffer, sort,
and print all the aliases one by one.
The problem is that the calculated total number of events doesn't match
the stored events in the aliases buffer.
The perf_pmu__num_events() is used to calculate the number of events. It
invokes the pmu_events_table__num_events() to go through the entire
events_table to find all events. Because of the
pmu_uncore_alias_match(), the suffix of uncore PMU will be ignored. So
the events for cbox and cbox_0 are all counted.
When storing events into the aliases buffer, the
perf_pmu__for_each_event() only process the events for cbox.
Since a bigger buffer was allocated, the last entry are all 0.
When printing all the aliases, null will be outputted, and trigger the
failure.
The mismatch was introduced from the commit e3edd6cf63 ("perf
pmu-events: Reduce processed events by passing PMU"). The
pmu_events_table__for_each_event() stops immediately once a pmu is set.
But for uncore, especially this case, the method is wrong and mismatch
what perf does in the perf_pmu__num_events().
With the patch,
$ perf list pmu | grep -A 1 clock.socket
unc_clock.socket
[This 48-bit fixed counter counts the UCLK cycles. Unit: uncore_cbox_0
$ perf test "perf all PMU test"
107: perf all PMU test : Ok
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/all/202407101021.2c8baddb-oliver.sang@intel.com/
Fixes: e3edd6cf63 ("perf pmu-events: Reduce processed events by passing PMU")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241001021431.814811-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f23fc34cc ]
With commit 8ec9497d3e ("tools/include: Sync uapi/linux/perf.h
with the kernel sources"), 'perf mem report' gives an incorrect memory
access string.
...
0.02% 1 3644 L5 hit [.] 0x0000000000009b0e mlc [.] 0x00007fce43f59480
...
This occurs because, if no entry exists in mem_lvlnum, perf_mem__lvl_scnprintf
will default to 'L%d, lvl', which in this case for PERF_MEM_LVLNUM_L2_MHB is 0x05.
Add entries for PERF_MEM_LVLNUM_L2_MHB and PERF_MEM_LVLNUM_MSC to mem_lvlnum,
so that the correct strings are printed.
...
0.02% 1 3644 L2 MHB hit [.] 0x0000000000009b0e mlc [.] 0x00007fce43f59480
...
Fixes: 8ec9497d3e ("tools/include: Sync uapi/linux/perf.h with the kernel sources")
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20240926144040.77897-1-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5afd032961 ]
cs_etm__flush(), like cs_etm__sample() is an operation that generates a
sample and then swaps the current with the previous packet. Calling
flush after processing the queues results in two swaps which corrupts
the next sample. Therefore it wasn't appropriate to call flush here so
remove it.
Flushing is still done on a discontinuity to explicitly clear the last
branch buffer, but when the packet_queue fills up before reaching a
timestamp, that's not a discontinuity and the call to
cs_etm__process_traceid_queue() already generated samples and drained
the buffers correctly.
This is visible by looking for a branch that has the same target as the
previous branch and the following source is before the address of the
last target, which is impossible as execution would have had to have
gone backwards:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
(packet_queue fills here before a timestamp, resulting in a flush and
branch target ffff80008011cadc is duplicated.)
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff80008011cadc update_sg_lb_stats+0x94
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
After removing the flush the correct branch target is used for the
second sample, and ffff8000801117c4 is no longer before the previous
address:
ffff800080849d40 _find_next_and_bit+0x78 => ffff80008011cadc update_sg_lb_stats+0x94
ffff80008011cb1c update_sg_lb_stats+0xd4 => ffff8000801117a0 cpu_util+0x0
ffff8000801117c4 cpu_util+0x24 => ffff8000801117d4 cpu_util+0x34
Make sure that a final branch stack is output at the end of the trace
by calling cs_etm__end_block(). This is already done for both the
timeless decode paths.
Fixes: 21fe8dc119 ("perf cs-etm: Add support for CPU-wide trace scenarios")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Closes: https://lore.kernel.org/all/20240719092619.274730-1-gankulkarni@os.amperecomputing.com/
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcbc60d7dc ]
Since commit fb9e90a67e ("rtla/timerlat: Make user-space threads
the default"), rtla-timerlat has been defaulting to
params->user_workload if neither that or params->kernel_workload is set.
This has unintentionally made -U, which sets only params->user_hist/top
but not params->user_workload, to behave like -u unless -k is set,
preventing the user from running a custom workload.
Example:
$ rtla timerlat hist -U -c 0 &
[1] 7413
$ python sample/timerlat_load.py 0
Error opening timerlat fd, did you run timerlat -U?
$ ps | grep timerlatu
7415 pts/4 00:00:00 timerlatu/0
Fix the issue by checking for params->user_top/hist instead of
params->user_workload when setting default thread mode.
Link: https://lore.kernel.org/20241021123140.14652-1-tglozar@redhat.com
Fixes: fb9e90a67e ("rtla/timerlat: Make user-space threads the default")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0161bd38c2 ]
On powerpc64 as shown below by readelf, vDSO functions symbols have
type NOTYPE.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
Link: 5f2dd691b6
Fixes: ba83b3239e ("selftests: vDSO: fix vDSO symbols lookup for powerpc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-By: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/b6ad2f1ee9887af3ca5ecade2a56f4acda517a85.1728512263.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0290abc986 ]
Some distros may not load nf_conntrack by default, which will cause
subsequent nf_conntrack sets to fail. Load this module if it is not
already loaded.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
[ Jason: add [[ -e ... ]] check so this works in the qemu harness. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ccb18f83 ]
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52ed077aa6 ]
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 862087c3d3 ]
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce4 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 523dffccba ]
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a4 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147f ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4095031463 ]
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66c54c2040 ]
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb4158ce8e ]
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d99e509c1 ]
This patch addresses the bpftool issue "Wrong callq address displayed"[0].
The issue stemmed from an incorrect program counter (PC) value used during
disassembly with LLVM or libbfd.
For LLVM: The PC argument must represent the actual address in the kernel
to compute the correct relative address.
For libbfd: The relative address can be adjusted by adding func_ksym within
the custom info->print_address_func to yield the correct address.
Links:
[0] https://github.com/libbpf/bpftool/issues/109
Changes:
v2 -> v3:
* Address comment from Quentin:
* Remove the typedef.
v1 -> v2:
* Fix the broken libbfd disassembler.
Fixes: e1947c750f ("bpftool: Refactor disassembler for JIT-ed programs")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241031152844.68817-1-leon.hwang@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 137978f422 ]
Since BPF skeleton inception libbpf has been doing mmap()'ing of global
data ARRAY maps in bpf_object__load_skeleton() API, which is used by
code generated .skel.h files (i.e., by BPF skeletons only).
This is wrong because if BPF object is loaded through generic
bpf_object__load() API, global data maps won't be re-mmap()'ed after
load step, and memory pointers returned from bpf_map__initial_value()
would be wrong and won't reflect the actual memory shared between BPF
program and user space.
bpf_map__initial_value() return result is rarely used after load, so
this went unnoticed for a really long time, until bpftrace project
attempted to load BPF object through generic bpf_object__load() API and
then used BPF subskeleton instantiated from such bpf_object. It turned
out that .data/.rodata/.bss data updates through such subskeleton was
"blackholed", all because libbpf wouldn't re-mmap() those maps during
bpf_object__load() phase.
Long story short, this step should be done by libbpf regardless of BPF
skeleton usage, right after BPF map is created in the kernel. This patch
moves this functionality into bpf_object__populate_internal_map() to
achieve this. And bpf_object__load_skeleton() is now simple and almost
trivial, only propagating these mmap()'ed pointers into user-supplied
skeleton structs.
We also do trivial adjustments to error reporting inside
bpf_object__populate_internal_map() for consistency with the rest of
libbpf's map-handling code.
Reported-by: Alastair Robertson <ajor@meta.com>
Reported-by: Jonathan Wiepert <jwiepert@meta.com>
Fixes: d66562fba1 ("libbpf: Add BPF object skeleton support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b2bfc2969 ]
Global variables of special types (like `struct bpf_spin_lock`) make
underlying ARRAY maps non-mmapable. To make this work with libbpf's
mmaping logic, application is expected to declare such special variables
as static, so libbpf doesn't even attempt to mmap() such ARRAYs.
test_spin_lock_fail.c didn't follow this rule, but given it relied on
this test to trigger failures, this went unnoticed, as we never got to
the step of mmap()'ing these ARRAY maps.
It is fragile and relies on specific sequence of libbpf steps, which are
an internal implementation details.
Fix the test by marking lockA and lockB as static.
Fixes: c48748aea4 ("selftests/bpf: Add failure test cases for spin lock pairing")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b29e231d66 ]
txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be
1 instead of 0.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee9b352ce4 ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db089c9158 ]
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
