This patch should help to improve the performance of the mlx4 and mlx5 on a
number of architectures. For example, on x86 the dma_wmb/rmb equates out
to a barrer() call as the architecture is already strong ordered, and on
PowerPC the call works out to a lwsync which is significantly less expensive
than the sync call that was being used for wmb.
I placed the new barriers between any spots that seemed to be trying to
order memory/memory reads or writes, if there are any spots that involved
MMIO I left the existing wmb in place as the new barriers cannot order
transactions between coherent and non-coherent memories.
v2: Reduced the replacments to just the spots where I could clearly
identify the usage pattern.
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Ido Shamay <idos@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of
the full barriers in order to improve performance.
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In socfpga_dwmac_parse_data forward error code from devm_reset_control_get.
This gives the driver another chance to laod if altr,rst-mgr is loaded after
the network driver.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netlink attribute for the power is s8. But for the driver level
operations we are collection power level value into integer.
It has to be change to s8 from int.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Commit 65de7654d3 ("iio: iio: Fix iio_channel_read return if
channel havn't info") added a check for valid info masks.
This patch adds missing channel info masks for all ADC channels.
Otherwise, iio_read_channel_raw() would return -EINVAL when called
by consumer drivers.
Note that the change of _processed to _raw actually fixes an ABI abuse
in the original driver where it was used to avoid some special handling
rather than because it was correct.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
PCI device hotplug
- Add missing curly braces in cpci_configure_slot() (Dan Carpenter)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ituX
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are some fixes for v4.0. I apologize for how late they are. We
were hoping for some better fixes, but couldn't get them polished in
time. These fix:
- a Xen domU oops with PCI passthrough devices
- a sparc T5 boot failure
- a STM SPEAr13xx crash (use after initdata freed)
- a cpcihp hotplug driver thinko
- an AER thinko that printed stack junk
Details:
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
PCI device hotplug
- Add missing curly braces in cpci_configure_slot() (Dan Carpenter)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
PCI/AER: Avoid info leak in __print_tlp_header()
PCI: spear: Drop __initdata from spear13xx_pcie_driver
Now that it is possible to lazily unmount an entire mount tree and
leave the individual mounts connected to each other add a new flag
UMOUNT_CONNECTED to umount_tree to force this behavior and use
this flag in detach_mounts.
This closes a bug where the deletion of a file or directory could
trigger an unmount and reveal data under a mount point.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
lookup_mountpoint can return either NULL or an error value.
Update the test in __detach_mounts to test for an error value
to avoid pathological cases causing a NULL pointer dereferences.
The callers of __detach_mounts should prevent it from ever being
called on an unlinked dentry but don't take any chances.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Modify umount(MNT_DETACH) to keep mounts in the hash table that are
locked to their parent mounts, when the parent is lazily unmounted.
In mntput_no_expire detach the children from the hash table, depending
on mnt_pin_kill in cleanup_mnt to decrement the mnt_count of the children.
In __detach_mounts if there are any mounts that have been unmounted
but still are on the list of mounts of a mountpoint, remove their
children from the mount hash table and those children to the unmounted
list so they won't linger potentially indefinitely waiting for their
final mntput, now that the mounts serve no purpose.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This is needed to support lazily umounting locked mounts. Because the
entire unmounted subtree needs to stay together until there are no
users with references to any part of the subtree.
To support this guarantee that the fs_pin m_list and s_list nodes
are initialized by initializing them in init_fs_pin allowing
for the possibility that pin_insert_group does not touch them.
Further use hlist_del_init in pin_remove so that there is
a hlist_unhashed test before the list we attempt to update
the previous list item.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
For future use factor out a function umount_mnt from umount_tree.
This function unhashes a mount and remembers where the mount
was mounted so that eventually when the code makes it to a
sleeping context the mountpoint can be dput.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Create a function unhash_mnt that contains the common code between
detach_mnt and umount_tree, and use unhash_mnt in place of the common
code. This add a unncessary list_del_init(mnt->mnt_child) into
umount_tree but given that mnt_child is already empty this extra
line is a noop.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The only users of collect_mounts are in audit_tree.c
In audit_trim_trees and audit_add_tree_rule the path passed into
collect_mounts is generated from kern_path passed an audit_tree
pathname which is guaranteed to be an absolute path. In those cases
collect_mounts is obviously intended to work on mounted paths and
if a race results in paths that are unmounted when collect_mounts
it is reasonable to fail early.
The paths passed into audit_tag_tree don't have the absolute path
check. But are used to play with fsnotify and otherwise interact with
the audit_trees, so again operating only on mounted paths appears
reasonable.
Avoid having to worry about what happens when we try and audit
unmounted filesystems by restricting collect_mounts to mounts
that appear in the mount tree.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This makes ltr501 code consistent with the coding style adopted
for the new drivers added to IIO.
We prepare the path for adding support for LTR559 chip.
Reported by checkpatch.pl
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"
Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Put NULL test on the result of the previous call instead on one of its
arguments. A simplified version of the semantic match that finds this
problem is as follows (http://coccinelle.lip6.fr/):
// <smpl>
r@
expression *e1;
expression *e2;
identifier f;
statement S1,S2;
@@
e1 = f(...,e2,...);
(
if (e1 == NULL || ...) S1 else S2
|
*if (e2 == NULL || ...) S1 else S2
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Refactor DT parsing into a separate function from probe() to
help addition of more DT parameters later.
No functional changes.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The device uses the MSB of the returned temperature value as an error
flag. Return a read error when this bit is set.
Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for system sleep and runtime power management.
To wake up the device, the SDA line should be held low for at least 33ms
while SCL is high. As this is not possible using the i2c API (and not
supported by all i2c adapters), a GPIO connected to the SDA line is
needed. The GPIO is named "wakeup" and can be specified in a device
tree with the "wakeup-gpios" binding.
If the wake-up GPIO is not given, disable power management for the
device. Entering sleep requires an SMBus byte access, hence power
management is also disabled if byte access is not supported by the
adapter.
Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mapping from the 16-bit EEPROM value to the decimal 0-1 range is
approximate. A special case ensures 0xFFFF shows as 1.0 instead of
0.999998565.
Writing to EEPROM requires an explicit erase by writing zero. In
addition, it takes 20ms for the erase/write to complete. During this
time no EEPROM register should be accessed. Therefore, two msleep()s
are added to the write function and a mutex protects against concurrent
access.
Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Also introduce "melexis" as a vendor prefix for device tree bindings.
Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Contact-less IR temperature sensors measure the temperature of an object
by using its thermal radiation. Surfaces with different emissivity
ratios emit different amounts of energy at the same temperature.
IIO_CHAN_INFO_CALIBEMISSIVITY allows the user to inform the sensor of the
emissivity of the object in front of it, in order to effectively measure
its temperature.
A device providing such setting is Melexis's MLX90614:
http://melexis.com/Assets/IR-sensor-thermometer-MLX90614-Datasheet-5152.aspx.
Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Modify the Gen9 SSEU device status logic to support Broxton.
Broxton reuses the Skylake power gate acknowledgment registers but
has at most 1 slice and 3 subslices. Broxton supports subslice
power gating within its single slice.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Modify the Gen9 SSEU info initialization logic to support
Broxton. Broxton reuses the SKL fuse registers but has at most
1 slice and 6 EU per subslice.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For BXT, DDI buf idle timeout delay needs to be increased to 16us.
Since this is a timeout value and we return as soon as the condition is
realized, no penalty incurred for other platforms.
v2:
- remove TIMEOUT macro used only at a single place (Daniel)
Suggested-by: Satheeshakrishna M <satheeshakrishna.m@intel.com>
Cc: Satheeshakrishna M <satheeshakrishna.m@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v1)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adds framework for Broxton HW WAs
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On Broxton per specification the GTT has to be mapped as uncached.
This was caught by the PTE write readback warning, which showed a
corrupted PTE value with using the current write-combine mapping.
v2:
- add comment explaining how the problem with WC mapping manifests
(Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pipe A and b have 4 planes.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Rebase on top of the for_each_pipe() change adding dev_priv as first
argument.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The caching options for page table entries have remained the same as
Cherryview. This patch fixes it so the right code path is taken on BXT.
v2: Fix up commit message (Mike)
Signed-off-by: Sumit Singh <sumit.k.singh@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Rebase on top of the early-quirks rework from Ville.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v1)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Starting from GEN5 the FBC base register is the same on all platforms.
GEN>=5 is the same condition as HAS_PCH_SPLIT except on BXT, so make
things work on BXT as well.
Motivated by Rodrigo's request to check FBC support on BXT.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Switch to info->ring_mask and add VEBOX support.
v3: Fold in update from Damien.
v4: Add GEN_DEFAULT_PIPEOFFSETS and IVB_CURSOR_OFFSETS
v5: set no-LLC (imre)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v1,v4)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Feature macros work on sio_data as well, so use them there.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Similar like the case for Realtek, VIA codec driver needs this ops as
well for making the widget power-save working.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In its present state, the driver mandates that its buffer only be
triggered by one of the device's own triggers (data ready or any
motion). This is not always desirable, for example because the
interrupt pins may not be wired in.
Patch the driver to be able to accept using an external trigger, such as
one based on hrtimer. When using such a trigger, we need to ensure that
the device is powered on when the buffer is started. We do that by
setting setup_ops for the buffer.
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds targets for building and cleaning iio tools to tools/Makefile.
To build iio tools from the toplevel kernel directory one should call:
$ make -C tools iio
and for cleaning it
$ make -C tools iio_clean
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the new IEEE80211_TX_STAT_NOACK_TRANSMITTED flag
to indicate successful transmission of no-ack frames.
This fixes multicast frame accounting.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This fix the regerssion introduced after "ath10k_wmi_requests_stats()
call to use more stat bits", both the 10.2.X FW and community FW 10.1.X
will return time out when access the fw_stats with the STAT_VDEV and
STAT_PDEV. Add the condition to use different fw_stats mask for different
FW versions.
Fixes: 7777d8c7ef ("ath10k: implement fw stats for wmi-tlv")
Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The default keyidx callback may be called after
more than 1 key is installed. This led to only 1
WEP key being reinstalled only. This caused Rxed
traffic encrypted with other WEP keys to be
dropped in client mode.
Tested-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The variable should be cleared regardless of
whether there's a peer associated with the key or
not.
This fixes case when user first associates with 2
WEP keys and then disconnects and connects with 1
WEP key. This resulted in WEP key count being 2 in
the driver leading to default keyidx fixup
failure.
Tested-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
