Commit graph

534,219 commits

Author SHA1 Message Date
Robin Gong
855832e47c dmaengine: imx-sdma: switch to dynamic context mode after script loaded
Below comments got from Page4724 of Reference Manual of i.mx6q:
http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf

--"Static context mode should be used for the first channel called
after reset to ensure that the all context RAM for that channel is
initialized during the context SAVE phase when the channel is
done or yields. Subsequent calls to the same channel or
different channels may use any of the dynamic context modes.
This will ensure that all context locations for the bootload
channel are initialized, and prevent undefined values in context
RAM from being loaded during the context restore if the
channel is re-started later"

Unfortunately, the rule was broken by commit(5b28aa319bba96987316425a1131813d87cbab35)
.This patch just take them back.

Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 15:55:22 +05:30
Borislav Petkov
69797dafe3 Revert "x86/mm/ASLR: Propagate base load address calculation"
This reverts commit:

  f47233c2d3 ("x86/mm/ASLR: Propagate base load address calculation")

The main reason for the revert is that the new boot flag does not work
at all currently, and in order to make this work, we need non-trivial
changes to the x86 boot code which we didn't manage to get done in
time for merging.

And even if we did, they would've been too risky so instead of
rushing things and break booting 4.1 on boxes left and right, we
will be very strict and conservative and will take our time with
this to fix and test it properly.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150316100628.GD22995@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-16 11:18:21 +01:00
Mike Galbraith
f8e617f458 sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs
To fully take advantage of MWAIT, apparently the CLFLUSH instruction needs
another quirk on certain CPUs: proper barriers around it on certain machines.

On a Q6600 SMP system, pipe-test scheduling performance, cross core,
improves significantly:

  3.8.13                   487.2 KHz    1.000
  3.13.0-master            415.5 KHz     .852
  3.13.0-master+           415.2 KHz     .852     + restore mwait_idle
  3.13.0-master++          488.5 KHz    1.002     + restore mwait_idle + IPI fix

Since X86_BUG_CLFLUSH_MONITOR is already a quirk, don't create a separate
quirk for the extra smp_mb()s.

Signed-off-by: Mike Galbraith <bitbucket@online.de>
Cc: <stable@vger.kernel.org> # 3.10+
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Malone <ibmalone@gmail.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1390061684.5566.4.camel@marge.simpson.net
[ Ported to recent kernel, added comments about the quirk. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-16 11:14:22 +01:00
Len Brown
b253149b84 sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance
In Linux-3.9 we removed the mwait_idle() loop:

  69fb3676df ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param")

The reasoning was that modern machines should be sufficiently
happy during the boot process using the default_idle() HALT
loop, until cpuidle loads and either acpi_idle or intel_idle
invoke the newer MWAIT-with-hints idle loop.

But two machines reported problems:

 1. Certain Core2-era machines support MWAIT-C1 and HALT only.
    MWAIT-C1 is preferred for optimal power and performance.
    But if they support just C1, cpuidle never loads and
    so they use the boot-time default idle loop forever.

 2. Some laptops will boot-hang if HALT is used,
    but will boot successfully if MWAIT is used.
    This appears to be a hidden assumption in BIOS SMI,
    that is presumably valid on the proprietary OS
    where the BIOS was validated.

       https://bugzilla.kernel.org/show_bug.cgi?id=60770

So here we effectively revert the patch above, restoring
the mwait_idle() loop.  However, we don't bother restoring
the idle=mwait cmdline parameter, since it appears to add
no value.

Maintainer notes:

  For 3.9, simply revert 69fb3676df
  for 3.10, patch -F3 applies, fuzz needed due to __cpuinit use in
  context For 3.11, 3.12, 3.13, this patch applies cleanly

Tested-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Mike Galbraith <bitbucket@online.de>
Cc: <stable@vger.kernel.org> # 3.9+
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Malone <ibmalone@gmail.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/345254a551eb5a6a866e048d7ab570fd2193aca4.1389763084.git.len.brown@intel.com
[ Ported to recent kernels. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-16 11:14:21 +01:00
Doug Goldstein
4899c054a9 USB: ftdi_sio: Added custom PID for Synapse Wireless product
Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their
SNAP Stick 200 product.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-16 10:45:10 +01:00
Jan Kara
7dca0548a2 Merge branch 'quota_interface' into for_next_testing 2015-03-16 10:26:41 +01:00
Xi Ruoyao
319c1d420a drm/i915: Ensure plane->state->fb stays in sync with plane->fb
plane->state->fb and plane->fb should always reference the same FB so
that atomic and legacy codepaths have the same view of display state.
However, there are some places in kernel code that directly set
plane->fb and neglect to update plane->state->fb. If we never do a
successful update through the atomic pipeline, the RmFB cleanup code
will look at the plane->state->fb pointer, which has never actually
been set to a legitimate value, and try to clean it up, leading to
BUG's.

Add a quick helper function to synchronize plane->state->fb with
plane->fb and call it everywhere the driver tries to manually set
plane->fb outside of the atomic pipeline. In this function, use
drm_atomic_set_fb_for_plane instead of writing plane->state->fb
directly to keep the reference count right.

This is modified from Matt Roper's patch to drm-intel-nightly with
commit id

commit afd65eb4cc
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Feb 3 13:10:04 2015 -0800

    drm/i915: Ensure plane->state->fb stays in sync with plane->fb

However this bug exists in mainline kernel too, so I created this to fix
it in mainline kernel.

A minor change is to use drm_atomic_set_fb_for_plane instead of update
reference count manually.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88909
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93711
Signed-off-by: Xi Ruoyao <xry111@outlook.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[Jani: included the patch notes in the commit message]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-16 11:13:57 +02:00
Johannes Berg
f84eaa1068 mac80211: ignore CSA to same channel
If the AP is confused and starts doing a CSA to the same channel,
just ignore that request instead of trying to act it out since it
was likely sent in error anyway.

In the case of the bug I was investigating the GO was misbehaving
and sending out a beacon with CSA IEs still included after having
actually done the channel switch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:36:12 +01:00
Johannes Berg
496fcc294d nl80211: ignore HT/VHT capabilities without QoS/WMM
As HT/VHT depend heavily on QoS/WMM, it's not a good idea to
let userspace add clients that have HT/VHT but not QoS/WMM.
Since it does so in certain cases we've observed (client is
using HT IEs but not QoS/WMM) just ignore the HT/VHT info at
this point and don't pass it down to the drivers which might
unconditionally use it.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:36:11 +01:00
Johannes Berg
70a3fd6c61 mac80211: ask for ECSA IE to be considered for beacon parse CRC
When a beacon from the AP contains only the ECSA IE, and not a CSA IE
as well, this ECSA IE is not considered for calculating the CRC and
the beacon might be dropped as not being interesting. This is clearly
wrong, it should be handled and the channel switch should be executed.

Fix this by including the ECSA IE ID in the bitmap of interesting IEs.

Reported-by: Gil Tribush <gil.tribush@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:36:11 +01:00
Andrei Otcheretianski
0f611d28fc mac80211: count interfaces correctly for combination checks
Since moving the interface combination checks to mac80211, it's
broken because it now only considers interfaces with an assigned
channel context, so for example any interface that isn't active
can still be up, which is clearly an issue; also, in particular
P2P-Device wdevs are an issue since they never have a chanctx.

Fix this by counting running interfaces instead the ones with a
channel context assigned.

Cc: stable@vger.kernel.org [3.16+]
Fixes: 73de86a389 ("cfg80211/mac80211: move interface counting for combination check to mac80211")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[rewrite commit message, dig out the commit it fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:35:59 +01:00
Marcel Holtmann
8e4e2ee5d8 Bluetooth: Use smp->local_pk + 32 instead of &smp->local_pk[32]
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:31 +02:00
Marcel Holtmann
33d0c03071 Bluetooth: Use OOB key pair for LE SC pairing with OOB method
The OOB public and secret key pair is different from the non-OOB pairing
procedure. SO when OOB method is in use, then use this key pair instead
of generating a new one.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:29 +02:00
Marcel Holtmann
0821a2c5ab Bluetooth: Return LE SC confirm and random values for out-of-band data
Then the local out-of-band data for LE SC pairing is requested via Read
Local OOB Extended Data command, then fill in the values generated by
the smp_generate_oob function. Every call of this command will overwrite
previously generated values.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:28 +02:00
Marcel Holtmann
60a27d653d Bluetooth: Add function for generating LE SC out-of-band data
This patch adds a smp_generate_oob function that allows to create
local out-of-band data that can be used for pairing and also provides
the confirmation and random value.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:27 +02:00
Marcel Holtmann
6e2dc6d113 Bluetooth: Add support for AES-CMAC hash for security manager device
The security manager device will require the use of AES-CMAC hash for
out-of-band data generation. This patch makes sure it is correctly
set up and available.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:25 +02:00
Marcel Holtmann
f709bfcf6a Bluetooth: Add constants for LE SC Confirmation and Random values
The LE Secure Connections Confirmation Value and LE Secure Connections
Random Value contants are required for the out-of-band data and so
just define them.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:20 +02:00
Marcel Holtmann
88a479d950 Bluetooth: Create SMP device structure for local crypto context
Every Bluetooth Low Energy controller requires a local crypto context
to handle the resolvable private addresses. At the moment this is just
a single crypto context, but for out-of-band data generation it will
require an additional. To facility this, create a struct smp_dev that
will hold all the extra information. This patch is just the refactoring
in preparation for future changes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:31:05 +02:00
Johannes Berg
f3b0bbb35d mac80211: refactor drop connection/unlock in CSA processing
The schedule_work()/mutex unlocking code is duplicated many times,
refactor that to a common place in the function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:31:02 +01:00
Marcel Holtmann
276812ec3e Bluetooth: Use kzfree instead of kfree in security manager
Within the security manager, it makes sense to use kzfree instead of
kfree for all data structures. This ensures that no key material leaks
by accident.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-16 10:30:53 +02:00
Emmanuel Grumbach
dc5a1ad7bd mac80211: allow to get wireless_dev structure from ieee80211_vif
This will allow mac80211 drivers to call cfg80211 APIs with
the right handle.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:30:30 +01:00
Fabio Estevam
bfc6dc138e ARM: imx_v6_v7_defconfig: Enable Bluetooth support
Enable Bluetooth over serial support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-16 16:11:23 +08:00
Johannes Berg
45ceeee81e mac80211: add comment for rx_path_lock
Add a comment explaining how the RX path lock is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:08:20 +01:00
Johannes Berg
4cc0dba95a mac80211: move netdev stats to common function
Move the netdev stats accounting into the common function
ieee80211_deliver_skb() that is called in both places.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:05:27 +01:00
Jeremy Kerr
7f664cf9e4 powerpc/boot: don't clobber r6 and r7 in epapr boot
We use r6 and r7 for epapr boot, but the current pre-C init will clobber
both of these.

This change does a simple replacement, of r6 -> r12 and r7 -> r13, so
that we hit platform init with these registers intact.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:58:35 +11:00
Jeremy Kerr
8c06f0d910 powerpc/boot: Fix stack corruption in epapr entry point
Currently, a 64-bit little-endian zImage.epapr won't boot in epapr mode,
as we never return from platform_init.

Before entering C, we initialise our stack by setting r1 16 bytes below
the end of the _bss_stack:

  stwu	r0,-16(r1)	/* establish a stack frame */

However, the called function will save the caller's lr in the caller's
frame's lr save area, at -16(r1) to -32(r1).

This means that writes to the fdt variable will corrupt the saved link
register:

 0000000020c06018 l     O .bss   0000000000001000 _bss_stack
 0000000020c07018 l     O .bss   0000000000000008 fdt

We'll need at least 32 bytes in the initial stack frame, to handle the
LR save area. We bump this to 112 bytes, as that'll be the max required
by ABIv1.

Thanks to Alistair Popple for debugging help.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:58:34 +11:00
Jeremy Kerr
90d1d44e0d powerpc/boot/wrapper: use the pseries wrapper for zImage.epapr
We'll likely be entering the zImage.epapr as BE, so include the pseries
implementation of _zimage_start, which adds the endian fixup magic.

Although the endian fixup won't work on Book III-E machines starting LE,
the current entry point doesn't support LE anyway, so we shouldn't be
breaking anything.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:58:32 +11:00
Jeremy Kerr
6c87b2202f powerpc/boot/fdt: Add little-endian support to libfdt wrappers
For epapr-style boot, we may be little-endian. This change implements
the proper conversion for fdt*_to_cpu and cpu_to_fdt*. We also need the
full cpu_to_* and *_to_cpu macros for this.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:58:31 +11:00
Jeremy Kerr
1680e4ba3d powerpc/boot/fdt: Use unsigned long for pointer casts
Now that the wrapper supports 64-bit builds, we see warnings when
attempting to cast pointers to int. Use unsigned long instead.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:58:30 +11:00
Arseny Solokha
5e86bfde9c powerpc/mpic: remove unused functions
Drop unused fsl_mpic_primary_get_version(), mpic_set_clk_ratio(),
mpic_set_serial_int().

  + fsl_mpic_primary_get_version() is just a safe wrapper around
fsl_mpic_get_version() for SMP configurations. While the latter is
called explicitly for handling PIC initialization and setting up error
interrupt vector depending on PIC hardware version, the former isn't
used for anything.

  + As for mpic_set_clk_ratio() and mpic_set_serial_int(), they both are
almost nine years old[1] but still have no chance to be called even from
out-of-tree modules because they both are __init and of course aren't
exported.

[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2006-June/023867.html

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Cc: hongtao.jia@freescale.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:18 +11:00
Arseny Solokha
f98e7f2fe9 powerpc/qe: drop unused ucc_slow_poll_transmitter_now
Drop ucc_slow_poll_transmitter_now() which has no users since its
inception in 2007 in commit 9865853851 ("[POWERPC] Add QUICC
Engine (QE) infrastructure").

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:17 +11:00
Arseny Solokha
170acae4c9 powerpc/boot: drop planetcore_set_serial_speed
Drop planetcore_set_serial_speed() which had no users since its
inception in commit fec6047047 ("[POWERPC] bootwrapper: Add PlanetCore
firmware support") in 2007.

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:17 +11:00
Michael Ellerman
b887f9e324 powerpc/powernv: Remove unused definitions in opal-api.h
This removes definitions in opal-api.h that are completely unused in
Linux.

For each of these I see three possibilities, 1) we *should* be using
them in Linux and patches will arrive to do that, 2) they are not used
but should stay in the header to document the API for some important
reason, 3) they are not used and needn't be part of the API.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
2015-03-16 18:50:16 +11:00
Michael Ellerman
d7cf83fcaf powerpc/powernv: Move opal-api.h closer to the Skiboot version
This commit gets opal-api.h to mostly match the version in Skiboot as of
commit ea7d806ab0ba.

The exceptions are things which are not (currently) used in Linux.

Most of this is just whitespace and a few things moving around. I think
the diff is readable.

Also OpalMessageType became opal_msg_type, requiring a change in the
Linux code.

Finally Skiboot and Linux disagree on CAPI vs CXL, because CAPI means
something else in Linux. To handle that we just point the Linux wrapper,
which is named "cxl" to the OPAL token OPAL_PCI_SET_PHB_CAPI_MODE.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
2015-03-16 18:50:16 +11:00
Michael Ellerman
d800ba1218 powerpc/powernv: Move OPAL API definitions to opal-api.h
We'd like to get to the stage where the OPAL API is defined in a header
that is identical between Linux and Skiboot.

As step one, split the bits that actually define the API into
opal-api.h. The Linux specific parts stay in opal.h.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
2015-03-16 18:50:15 +11:00
Michal Marek
755457f992 powerpc/boot: Makefile cleanup
The $(image-n) variable will never exist, because unset Kconfig options
are '' and not 'n'.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:15 +11:00
Markus Elfring
7f4eec3953 powerpc: Delete unnecessary checks before kfree()
The kfree() function tests whether its argument is NULL and then returns
immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:14 +11:00
Stewart Smith
7e73a3b7f3 powerpc/powernv: only call OPAL_RESEND_DUMP if firmware supports it
Not all OPAL platforms support resending system dumps, so check
that current firmware supports it first. Otherwise we get firmware
complaining:
"OPAL: Called with bad token 91 !"

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:14 +11:00
Stewart Smith
fc81de6310 powerpc/powernv: only call OPAL_ELOG_RESEND if firmware supports it
Otherwise firmware complains: "OPAL: Called with bad token 74 !"
as not all OPAL systems have the ability to resend error logs.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:14 +11:00
Stewart Smith
b962f5a446 powerpc/powernv: only register log if OPAL supports doing so
Correct use of REGISTER/UNREGISTER is to check if the token exists
before calling. If we don't we get a "OPAL: Called with bad token 101 !"
error, which is harmless but may be alarming to some.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:50:13 +11:00
Ley Foon Tan
6347e2a10f nios2: mm: do not invoke OOM killer on kernel fault OOM
Follow commit 871341023c.

Kernel faults are expected to handle OOM conditions gracefully (gup,
uaccess etc.), so they should never invoke the OOM killer.  Reserve
this for faults triggered in user context when it is the only option.

Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-03-16 15:35:25 +08:00
Anton Blanchard
df99e6eb3f powerpc: Change vsrX register defines to vsX to match gcc and glibc
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.

One gratuitous difference between userspace and the kernel is the
VSX register definitions - the kernel uses vsrX whereas gcc uses
vsX.

Change the kernel to match userspace.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:32:11 +11:00
Anton Blanchard
c2ce6f9f3d powerpc: Change vrX register defines to vX to match gcc and glibc
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.

One gratuitous difference between userspace and the kernel is the
VMX register definitions - the kernel uses vrX whereas both gcc and
glibc use vX.

Change the kernel to match userspace.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16 18:32:11 +11:00
Fabian Frederick
1be440de2a udf: use int for allocated blocks instead of sector_t
Fix the following warnings:

fs/udf/balloc.c:768:15: warning: conversion to 'sector_t' from 'int'
may change the sign of the result [-Wsign-conversion]
   allocated = udf_bitmap_prealloc_blocks(sb,
               ^
fs/udf/balloc.c:773:15: warning: conversion to 'sector_t' from 'int'
may change the sign of the result [-Wsign-conversion]
   allocated = udf_table_prealloc_blocks(sb,
               ^
fs/udf/balloc.c:778:15: warning: conversion to 'sector_t' from 'int'
may change the sign of the result [-Wsign-conversion]
   allocated = udf_bitmap_prealloc_blocks(sb,
               ^
fs/udf/balloc.c:783:15: warning: conversion to 'sector_t' from 'int'
may change the sign of the result [-Wsign-conversion]
   allocated = udf_table_prealloc_blocks(sb,
               ^
fs/udf/balloc.c:791:26: warning: conversion to 'loff_t' from 'sector_t'
may change the sign of the result [-Wsign-conversion]
   inode_add_bytes(inode, allocated << sb->s_blocksize_bits);
                          ^
fs/udf/balloc.c:792:2: warning: conversion to 'int' from 'sector_t'
may alter its value [-Wconversion]
  return allocated;

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-16 08:24:16 +01:00
Felix Fietkau
c09396eb8e ath9k: disable TPC support again (for now)
TPC support has been observed to cause some tx power fluctuations on
some devices with at least AR934x and AR938x chips.
Disable it for now until the bugs have been found and fixed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 08:35:23 +02:00
Felix Fietkau
1cf48f22c9 ath9k: fix tracking of enabled AP beacons
sc->nbcnvifs tracks assigned beacon slots, not enabled beacons.
Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool)
should be updated, or if beacons have been enabled already.
With the current code (depending on the order of calls), beacons often
do not get enabled in an AP+STA setup.
To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a
bitmask of enabled beacon slots.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 08:34:36 +02:00
Mark Yao
1067219b27 drm/rockchip: vop: power off until vop standby take effect
Vop standby will take effect at end of current frame,
if dsp_hold_valid_irq happen, it means vop standby complete.

we must wait standby complete when we want to disable aclk,
if not, memory bus maybe dead.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-03-16 13:50:57 +08:00
Mark Yao
52ab7891fb drm/rockchip: vop: set vop enabled after enable iommu
there is a Bug that:
  vop_enable()->drm_vblank_on, drm_vblank_on may call vop
enable vblank. if it happen, vblank enable would failed,
then cause irq status error. because is_enabled value is set
after drm_vblank_on.

after enable vop clocks and iommu regs, we can sure that
R/W vop regs and do vop plane flip is safe, so place
is_enabled = true after enable iommu is suitable.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-03-16 13:50:32 +08:00
Mark Yao
31e980c5a2 drm/rockchip: vop use is_enabled instead of dpms mode
drm dpms have many power modes: ON,OFF,SUSPEND,STANDBY, etc.
but vop only have enable/disable mode, maybe case such bug:
 --> DRM_DPMS_ON: power on vop
 --> DRM_DPMS_SUSPEND: power off vop
 --> DRM_DPMS_OFF: already power off at SUSPEND, crash
so use a bool val is more suitable.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-03-16 13:50:04 +08:00
Mark Yao
44ddb7ef38 drm/rockchip: vop: fix vop vsync/hsync polarity
Vop set wrong vsync/hsync polarity, it may cause some
display problem. known problem is that caused HDMI hdcp
authenticate failed, caused pixel offset with hdmi display.
the polarity description at RK3288 TRM doc:
  dsp_vsync_pol
    VSYNC polarity
      1'b0 : negative
      1'b1 : positive
      dsp_hsync_pol
    HSYNC polarity
      1'b0 : negative
      1'b1 : positive

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
2015-03-16 13:48:15 +08:00