show_stack_log_lvl() does not set the log level after a new line, the
following messages printed with pr_cont() are thus assigned to the
default log level.
This patch prepends the log level to the next message following a new
line.
print_trace_address() uses printk(log_lvl). Using printk() with just
a log level is ignored and thus has no effect on the next pr_cont().
We need to prepend the log level directly into the message.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1424399661-20327-1-git-send-email-adrien+dev@schischi.me
Signed-off-by: Borislav Petkov <bp@suse.de>
Need to define and use appropriate functions for when BLK_DEV_INTEGRITY
is not set.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Some dma channels may be reserved for other purpose in other layer,
like secure driver in EL2/EL3. PDMA driver can see the interrupt
status, but it should not try to handle related interrupt, since it
doesn't belong to PDMA driver in kernel. These interrupts should be
handled by corresponding client/module.Otherwise, it will overwrite
illegal memory and cause unexpected issues, since pdma driver only
requests resources for pdma channels.
In PDMA driver, the reserved channels are at the end of total 32
channels. If we find interrupt bit index is not smaller than total
dma channels, we should ignore it.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 1e02ce4ccc ("x86: Store a per-cpu shadow copy of CR4")
introduced CR4 shadows.
These shadows are initialized in early boot code. The commit missed
initialization for 64-bit PV(H) guests that this patch adds.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
A request in the ring buffer mustn't be read after it has been marked
as consumed. Otherwise it might already have been reused by the
frontend without violating the ring protocol.
To avoid inconsistencies in the backend only work on a private copy
of the request. This will ensure a malicious guest not being able to
bypass consistency checks of the backend by modifying an active
request.
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Hypercalls submitted by user space tools via the privcmd driver can
take a long time (potentially many 10s of seconds) if the hypercall
has many sub-operations.
A fully preemptible kernel may deschedule such as task in any upcall
called from a hypercall continuation.
However, in a kernel with voluntary or no preemption, hypercall
continuations in Xen allow event handlers to be run but the task
issuing the hypercall will not be descheduled until the hypercall is
complete and the ioctl returns to user space. These long running
tasks may also trigger the kernel's soft lockup detection.
Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to
bracket hypercalls that may be preempted. Use these in the privcmd
driver.
When returning from an upcall, call xen_maybe_preempt_hcall() which
adds a schedule point if if the current task was within a preemptible
hypercall.
Since _cond_resched() can move the task to a different CPU, clear and
set xen_in_preemptible_hcall around the call.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Commit d524165cb8 ("x86/apic: Check x2apic early") tests X2APIC_ENABLE
bit of MSR_IA32_APICBASE when CONFIG_X86_X2APIC is off and panics
the kernel when this bit is set.
Xen's PV guests will pass this MSR read to the hypervisor which will
return its version of the MSR, where this bit might be set. Make sure
we clear it before returning MSR value to the caller.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Commit eb10d63555 ("imx-drm: encoder prepare/mode_set must use adjusted mode")
broke the first LVDS modeset by using crtc->hwmode before crtc mode_set is
called. In fact, encoder prepare is not supposed to prepare the display clock
at all. Rather encoder mode_set should be used to set the DI clock rate, before
it is enabled by crtc commit.
Reported-by: Liu Ying <Ying.Liu@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The loop iterating over curr_ctrl in dw_hdmi terminates on mpixelclock == ~0UL,
so there needs to be an end of list element here in case a mode with a pixel
clock larger than 216 MHz is set.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch limits the pixel clock to 13.4 MHz - 266 MHz for i.MX6Q
and 13.5 MHz - 270 MHz for i.MX6DL, which is the range documented
in the HDMI Transmitter chapter of the respective reference manuals.
Without this patch, when connected to a monitor capable of 2160p60
modes, dw_hdmi will happily report this mode and the IPU code will
cause a division by zero in ipu_di_config_clock when trying to figure
out how to divide the 264 MHz HSP clock down to ~600 MHz.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Even if an unsupported mode with a pixel clock larger than two times the
264 MHz IPU HSP clock is set, don't divide by zero.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Added new PHY register definitions to control TDC buffer calibration and
digital lock threshold.
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, the command parser tries to create a secondary batch exactly
as large as the original, and vmap both. This is open to abuse by
userspace using extremely large batch objects, but only executing very
short batches. For example, this would be if userspace were to implement
a command submission ringbuffer. However, we only need to allocate pages
for just the contents of the command sequence in the batch - all
relocations copied to the secondary batch will reference the original
batch and so there can be no access to the secondary batch outside of
the explicit execution region.
Testcase: igt/gem_exec_big #ivb,byt,hsw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Algorithm:
1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD)
2. Node 1 sends NEWDISK with uuid and slot number
3. Other nodes issue kobject_uevent_env with uuid and slot number
(Steps 4,5 could be a udev rule)
4. In userspace, the node searches for the disk, perhaps
using blkid -t SUB_UUID=""
5. Other nodes issue either of the following depending on whether the disk
was found:
ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
disc.number set to slot number)
ioctl(CLUSTERED_DISK_NACK)
6. Other nodes drop lock on no-new-devs (CR) if device is found
7. Node 1 attempts EX lock on no-new-devs
8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk
as SpareLocal
9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED
10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
set choose_first true for cluster read in read balance when the area
is resyncing.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
If there is a resync going on, all nodes must suspend writes to the
range. This is recorded in the suspend_info/suspend_list.
If there is an I/O within the ranges of any of the suspend_info,
should_suspend will return 1.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
When a RESYNC_START message arrives, the node removes the entry
with the current slot number and adds the range to the
suspend_list.
Simlarly, when a RESYNC_FINISHED message is received, node clears
entry with respect to the bitmap number.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
When a resync is initiated, RESYNCING message is sent to all active
nodes with the range (lo,hi). When the resync is over, a RESYNCING
message is sent with (0,0). A high sector value of zero indicates
that the resync is over.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Re-reads the devices by invalidating the cache.
Since we don't write to faulty devices, this is detected using
events recorded in the devices. If it is old as compared to the mddev
mark it is faulty.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
- request to send a message
- make changes to superblock
- send messages telling everyone that the superblock has changed
- other nodes all read the superblock
- other nodes all ack the messages
- updating node release the "I'm sending a message" resource.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
The sending part is split in two functions to make sure
atomicity of the operations, such as the MD superblock update.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
1. receive status
sender receiver receiver
ACK:CR ACK:CR ACK:CR
2. sender get EX of TOKEN
sender get EX of MESSAGE
sender receiver receiver
TOKEN:EX ACK:CR ACK:CR
MESSAGE:EX
ACK:CR
3. sender write LVB.
sender down-convert MESSAGE from EX to CR
sender try to get EX of ACK
[ wait until all receiver has *processed* the MESSAGE ]
[ triggered by bast of ACK ]
receiver get CR of MESSAGE
receiver read LVB
receiver processes the message
[ wait finish ]
receiver release ACK
sender receiver receiver
TOKEN:EX MESSAGE:CR MESSAGE:CR
MESSAGE:CR
ACK:EX
4. sender down-convert ACK from EX to CR
sender release MESSAGE
sender release TOKEN
receiver upconvert to EX of MESSAGE
receiver get CR of ACK
receiver release MESSAGE
sender receiver receiver
ACK:CR ACK:CR ACK:CR
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
The DLM informs us in case of node failure with the DLM slot number.
cluster_info->recovery_map sets the bit corresponding to the slot number
and wakes up the recovery thread.
The recovery thread:
1. Derives the slot number from the recovery_map
2. Locks the bitmap corresponding to the slot
3. Copies the set bits to the node-local bitmap
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
bitmap_copy_from_slot reads the bitmap from the slot mentioned.
It then copies the set bits to the node local bitmap.
This is helper function for the resync operation on node failure.
bitmap_set_memory_bits() currently assumes it is only run at startup and that
they bitmap is currently empty. So if it finds that a region is already
marked as dirty, it won't mark it dirty again. Change bitmap_set_memory_bits()
to always set the NEEDED_MASK bit if 'needed' is set.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
When a PCM draining is performed to an empty stream that has been
already in PREPARED state, the current code just ignores and leaves as
it is, although the drain is supposed to set all such streams to SETUP
state. This patch covers that overlooked case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When querying the GTFIFOCTL register to check the FIFO space, the read value
must be masked. The operation is repeated explicitly in several places. This
change refactors the read-and-mask code into a function call.
v2: rebased on top of Mika's forcewake patch set, specifically:
[PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers
Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Export 32-bit version of memcpy for use in suspend/resume.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for platform suspend and resume. We ensure all pcms are
suspended by invoking snd_soc_suspend() and then stop the DSP
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver didn't implement support for pcm stream suspend and resume, so
add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds missing pcm pause and resume ops in the driver
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The updated firmware expects the MMX ID to be used as 3, so update the
driver as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP messages are sent with nonatomic context, which include trigger
messages, so mark the driver as nonatomic
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA core with commit 257f8cce5d - "ALSA: pcm: Allow nonatomic trigger
operations" allows trigger ops to implemented as nonatomic. For ASoC, we can
specify this in dailinks and is updated while snd_pcm is created
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch will fix below sparse warnings
warning: incorrect type in argument 2 (different base types) expected
unsigned int [unsigned] val got restricted snd_pcm_format_t [usertype]
<noident>
sound/soc/intel/haswell.c:61:37
sound/soc/intel/broadwell.c:115:37:
sound/soc/intel/bytcr_dpcm_rt5640.c:118:37:
sound/soc/intel/cht_bsw_rt5672.c:183:37:
sound/soc/intel/cht_bsw_rt5645.c:208:37:
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper to set pcm format directly from params
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The manual recommends that we reset the DSP when we suspend so add that in
runtime suspend handler
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC driver saved only IMR register, we need to save the CSR as well, so
add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The updated firmware expects the MMX ID to be used as 3, so update the
driver as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The "Extended Compat ID OS Feature Descriptor Specification" does not
require the (sub)compatible ids to be NUL-terminated, because they
are placed in a fixed-size buffer and only unused parts of it should
contain NULs. If the buffer is fully utilized, there is no place for NULs.
Consequently, the code which uses desc->ext_compat_id never expects the
data contained to be NUL terminated.
If the compatible id is stored after sub-compatible id, and the compatible
id is full length (8 bytes), the (useless) NUL terminator overwrites the
first byte of the sub-compatible id.
If the sub-compatible id is full length (8 bytes), the (useless) NUL
terminator ends up out of the buffer. The situation can happen in the RNDIS
function, where the buffer is a part of struct f_rndis_opts. The next
member of struct f_rndis_opts is a mutex, so its first byte gets
overwritten. The said byte is a part of a mutex'es member which contains
the information on whether the muext is locked or not. This can lead to a
deadlock, because, in a configfs-composed gadget when a function is linked
into a configuration with config_usb_cfg_link(), usb_get_function()
is called, which then calls rndis_alloc(), which tries locking the same
mutex and (wrongly) finds it already locked.
This patch eliminates NUL terminating of the (sub)compatible id.
Cc: <stable@vger.kernel.org> # v3.16+
Fixes: da4243145f: "usb: gadget: configfs: OS Extended Compatibility descriptors support"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
In the wrapper the IRQ disable should be done by writing 1's to the
IRQ*_CLR register. Existing code is broken because it instead writes
zeros to IRQ*_SET register.
Fix this by adding functions dwc3_omap_write_irqmisc_clr() and
dwc3_omap_write_irq0_clr() which do the right thing.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch fixes following sparse warnings:
uvc_v4l2.c:264:29: warning: symbol 'uvc_v4l2_ioctl_ops' was not declared. Should it be static?
uvc_v4l2.c:355:29: warning: symbol 'uvc_v4l2_fops' was not declared. Should it be static?
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch fixes following sparse warnings:
g_ffs.c:136:3: warning: symbol 'gfs_configurations' was not declared. Should it be static?
g_ffs.c:281:16: warning: Using plain integer as NULL pointer
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch fixes following sparse warnings:
uvc_video.c:283:5: warning: symbol 'uvcg_video_pump' was not declared. Should it be static?
uvc_video.c:342:5: warning: symbol 'uvcg_video_enable' was not declared. Should it be static?
uvc_video.c:381:5: warning: symbol 'uvcg_video_init' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch fixes following sparse warnings:
f_sourcesink.c:347:34: warning: symbol 'ss_int_source_comp_desc' was not declared. Should it be static?
f_sourcesink.c:365:34: warning: symbol 'ss_int_sink_comp_desc' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch fixes following sparse warnings:
f_uac2.c:57:12: warning: symbol 'uac2_name' was not declared. Should it be static?
f_uac2.c:637:36: warning: symbol 'in_clk_src_desc' was not declared. Should it be static?
f_uac2.c:649:36: warning: symbol 'out_clk_src_desc' was not declared. Should it be static?
f_uac2.c:661:39: warning: symbol 'usb_out_it_desc' was not declared. Should it be static?
f_uac2.c:675:39: warning: symbol 'io_in_it_desc' was not declared. Should it be static?
f_uac2.c:689:40: warning: symbol 'usb_in_ot_desc' was not declared. Should it be static?
f_uac2.c:703:40: warning: symbol 'io_out_ot_desc' was not declared. Should it be static?
f_uac2.c:716:34: warning: symbol 'ac_hdr_desc' was not declared. Should it be static?
f_uac2.c:754:34: warning: symbol 'as_out_hdr_desc' was not declared. Should it be static?
f_uac2.c:767:38: warning: symbol 'as_out_fmt1_desc' was not declared. Should it be static?
f_uac2.c:775:32: warning: symbol 'fs_epout_desc' was not declared. Should it be static?
f_uac2.c:785:32: warning: symbol 'hs_epout_desc' was not declared. Should it be static?
f_uac2.c:831:34: warning: symbol 'as_in_hdr_desc' was not declared. Should it be static?
f_uac2.c:844:38: warning: symbol 'as_in_fmt1_desc' was not declared. Should it be static?
f_uac2.c:852:32: warning: symbol 'fs_epin_desc' was not declared. Should it be static?
f_uac2.c:862:32: warning: symbol 'hs_epin_desc' was not declared. Should it be static?
f_uac2.c:1566:21: warning: symbol 'afunc_alloc' was not declared. Should it be static?
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>