drm/i915 feature pull #2 for v7.1:
Refactoring and cleanups:
- Refactor LT PHY PLL handling to use the DPLL framework (Mika)
- Implement display register polling and waits in display code (Ville)
- Move PCH clock gating in display PCH file (Luca)
- Add shared stepping info header for i915 and display (Jani)
- Clean up GVT I2C command decoding (Jonathan)
- NV12 plane unlinking cleanups (Ville)
- Clean up NV12 DDB/watermark handling for pre-ICL platforms (Ville)
Fixes:
- An assortment of DSI fixes (Ville)
- Handle PORT_NONE in assert_port_valid() (Jonathan)
- Fix link failure without FBDEV emulation (Arnd Bergmann)
- Quirk disable panel replay on certain Dell XPS models (Jouni)
- Check if VESA DPCD AUX backlight is possible (Suraj)
Other:
- Mailmap update for Christoph (Christoph)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_plane.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ac9dfdb745d5a67c519ea150a6f36f8f74b8760e@intel.com
Our xe-vfio-pci component relies on the confirmation from the PF
that VF FLR processing has finished, but due to the notification
latency on the HW/FW side, PF might be unaware yet of the already
triggered VF FLR.
Update VF state machine with new FLR_PREPARE state that indicate
imminent VF FLR notification and treat that as a begin of the FLR
sequence. Also introduce function that xe-vfio-pci should call to
guarantee correct synchronization.
v2: move PREPARE into WIP, update commit msg (Michal)
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260309152449.910636-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/848d32a44bf844cba3d66e44ba9f20bea4a8352d.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move the get/put/ref/flush_for_display calls to the display parent
interface.
For i915, move the hooks next to the other i915 core frontbuffer code in
i915_gem_object_frontbuffer.c. For xe, add new file xe_frontbuffer.c for
the same.
Note: The intel_frontbuffer_flush() calls from
i915_gem_object_frontbuffer.c will partially route back to i915 core via
the parent interface. This is less than stellar.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/f69b967ed82bbcfd60ffa77ba197b26a1399f09f.1772475391.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a shared header that's used by i915, xe, and i915 display.
This allows us to drop the compat-i915-headers/i915_reg_defs.h include
from xe_reg_defs.h. All the register macro helpers were subtly pulled in
from i915 to all of xe through this.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/fcd70f3317755bf98a6e7ae88974aa8ba06efd1e.1772042022.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's unclear what the direction of the VMA abstraction in the parent
interface should be, but convert i915_vma_fence_id() to parent interface
for starters. This paves the way for making struct i915_vma opaque
towards display.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/036f4b2d20cc1b0a7ab814beb5bb914c53b6eb53.1772212579.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert the direct i915_overlay_*() calls from the display
side to go over a new parent interface instead.
v2: Correctly handle the ERR_PTR returned by
i915_overlay_obj_lookup() (Jani)
v3: Rebase due to the NULL check in intel_overlay_cleanup()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226130150.16816-1-ville.syrjala@linux.intel.com
struct i915_address_space is used in an opaque fashion in the display
parent interface, but it's just one include away from being
non-opaque. And anyway the name is rather specific.
Switch to using the struct intel_dpt instead, which embeds struct
i915_address_space anyway. With the definition hidden in i915_dpt.c,
this can't be accidentally made non-opaque, and the type seems rather
more generic anyway.
We do have to add a new helper i915_dpt_to_vm(), as there's one case in
intel_fb_pin_to_dpt() that requires direct access to struct
i915_address_space. But this just underlines the point about opacity.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/daa39178c0b0305b010564952d691f06e3cd63ca.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move VLV_IRQ_REGS to common header for interrupt to make
intel_display_irq.c free from including i915_reg.h.
v2: Move interrupt to dedicated header (Jani)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-18-uma.shankar@intel.com
Move FW_BLC_SELF to common header to make i9xx_wm.c
free from i915_reg.h include. Introduce a common
intel_gmd_misc_regs.h to define common miscellaneous
register definitions across graphics and display.
v3: MISC header included as needed, drop from i915_reg (Jani)
v2: Introdue a common misc header for GMD
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-13-uma.shankar@intel.com
Move GEN2_ISR and some interrupt definitions to common header.
This removes dependency of i915_reg.h from intel_overlay.c.
v3: Rename interrupt header with regs suffix (Jani)
v2: Create a separate file for common interrupts (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-11-uma.shankar@intel.com
There are certain register definitions which are commonly shared
by i915, xe and display. Extract the same to a common header to
avoid duplication.
Move GEN6_PCODE_MAILBOX to common pcode header to make intel_cdclk.c
free from including i915_reg.h.
v3: Include pcode header as required, instead in i915_reg.h (Jani)
v2: Make the header granular and per feature (Jani)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-6-uma.shankar@intel.com
Call the parent driver pcode functions through the parent interface
function pointers instead of expecting both to have functions of the
same name.
In i915, add the interface to existing intel_pcode.[ch], while in xe
move them to new display/xe_display_pcode.[ch] and build it only for
CONFIG_DRM_XE_DISPLAY=y.
Do not add separate write and write_timeout calls in the
interface. Instead, handle the default 1 ms timeout in the
intel_parent.c glue layer.
This drops the last intel_pcode.h includes from display, and allows us
to remove the corresponding xe compat header.
v2: initialize .pcode in i915
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260126112925.2452171-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move the DSB buffer handling to the display parent interface, making
display more independent of i915 and xe driver implementations.
Since the DSB parent interface is only called from intel_dsb.c, add the
wrappers there with smaller visibility instead of the usual
intel_parent.[ch], and using struct intel_dsb as the context parameter
for convenience.
Unfortunately, memset() being a macro in linux/fortify-string.h, we
can't use that as the function pointer name. dsb->memset() would be
using the macro and leading to build failures. Therefore, use .fill()
for the memset() functionality.
v2: s/memset/fill/
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/df117c862a6d34dae340e4a85c2482b4e29c8884.1768923917.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The actual GMCH_CRTL lives in the host bridge aka. device 0,
but device 2 has a read-only mirror on i85x/i865+. Document
that fact.
Also remove the ancient tales about where the defines are used.
Those haven't been true in a long time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The PCI config space register defines in i915_drm.h are
a bit of a mess; Whitespace is all over the place, register
masks and values are defined in inconsistent ways.
Clean it up a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fix kernel-doc warnings on struct intel_lb_component_ops:
Warning: include/drm/intel/intel_lb_mei_interface.h:55 Incorrect use of
kernel-doc format: * push_payload - Sends a payload to the
authentication firmware
And a bunch more. There isn't really support for documenting function
pointer struct members in kernel-doc, but at least reference the member
properly.
Fixes: 741eeabb7c ("mei: late_bind: add late binding component driver")
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260107160226.2381388-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move intel_reuse_initial_plane_obj() into common display code, and split
the ->find_obj hook into ->alloc_obj and ->setup hooks.
Return the struct drm_gem_object from ->alloc_obj in preparation for
moving more things to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c71011dbb11afaa5c4da30aa2627833374300d63.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add the initial plane handling functions to the display parent
interface. Add the call wrappers in dedicated intel_initial_plane.c
instead of intel_parent.c, as we'll be refactoring the calls heavily.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/ab91c891677fe2bb83bf5aafa5ee984b2442b84d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31 ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
Since the stolen memory hooks are function pointers, make some of them
optional instead of having to define them for xe.
insert_node, area_address, and area_size are only needed on platforms
not supported by xe.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/0dbb460e8bd1df29df98862d08fcdfda03912673.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Call the stolen memory interface through the display parent interface.
This makes xe compat gem/i915_gem_stolen.h redundant, and it can be
removed.
v2: Rebase, convert one more call that appeared
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/350c82c49fe40f6319d14d309180e2e2752145ac.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 17f22465c5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add .fence_priority_display() to display parent interface, removing a
display dependency on gem/i915_gem_object.h.
This allows us to remove the xe compat gem/i915_gem_object.h.
v2: Don't mix this with the rps interface (Ville)
v3: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c7782862956e3aa59eaeb6dcf80906c1fc063ae1.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add struct intel_display_rps_interface to the display parent interface,
and call the RPS functions through it. The RPS interface is optional.
v2: s/boost/boost_if_not_started/ and keep comment in caller (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/6a6c4420d9f2d9a545ee6df4cad5fdc32a86636b.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add .has_fenced_regions() to display parent interface, removing more
dependencies on struct drm_i915_private, i915_drv.h, and
gt/intel_gt_types.h.
This allows us to remove the xe compat gt/intel_gt_types.h.
v2: s/fence_support_legacy/has_fenced_regions/ (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/309f61a8742c3bf731c820b2f9e1024143db8598.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump improvement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaRcIGwAKCRC4FpNVCsYG
v3VWAQD7eVdaBKgOUoyWexzeWiHeAEAe9QwgTdK71PBNHF1kIQEA3dg12QDETxFp
pWvOYie6bl+ApXx/JJ0OKtMeIFz2mQc=
=MS1G
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-11-14' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
