mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-18 19:12:56 +00:00
150,551 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
419ce133ab |
tcp: allow again tcp_disconnect() when threads are waiting
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes:
|
||
|
|
e8c127b057 |
Including fixes from CAN and BPF.
Previous releases - regressions: - af_packet: fix fortified memcpy() without flex array. - tcp: fix crashes trying to free half-baked MTU probes - xdp: fix zero-size allocation warning in xskq_create() - can: sja1000: always restart the tx queue after an overrun - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp - eth: nfp: avoid rmmod nfp crash issues - eth: octeontx2-pf: fix page pool frag allocation warning Previous releases - always broken: - mctp: perform route lookups under a RCU read-side lock - bpf: s390: fix clobbering the caller's backchain in the trampoline - phy: lynx-28g: cancel the CDR check work item on the remove path - dsa: qca8k: fix qca8k driver for Turris 1.x - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work() - eth: ixgbe: fix crash with empty VF macvlan list Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmUnw0USHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkN0EP/RKl317fLqlm6ZzRUMVP169CNRAgMaBG 7FIwxlCv4hfO2Rx09Mxu2wjDp+tBQKqBKaxfcwh8tEdLMqqCymOW2K5+tWVty8C8 TJJS+zggqLAo7DjXbnT8GBm5owHPLKGNxW6vRmnw9xraCD/nuV1wqolI2+l4IxB+ kqfliltepnJSakg0uXg7/uwAE87slBzX5VgB6K5JKLiiDMD8tYoAUmZzH8bMJd0l Cl7+L+ucRfQkj0DPfuZM/FncM0el7oFB6imnKd36hD6vfDfCNxpyNBYG1yZ/61/N 7H3E595Hr9PA+YBZjja3UvQGbFXkyMHloQdYxmq4s0T2WHqKwRyjLlwPayMXvavn OTJh2VAs68ivtti0ry5Nbgz4viiNfr32PLyZr6XySwCZ1/TCLjV4Cq9IYnaP3YeM KA+CIl3d0asQdZuMXTBivmtF65Buawt9UX/gJzUst2mNdcqhV1RTNWDNWoFLQ0qW gz8XN68V5LhbaaOq/Lat80krWgNLNZIlTNmSsE/Ie799w7dAHn/xvT6h+h5pF1XX dhng9NK7RL7KVcI/9walArOnhz9ksGWc2+JPMQohuPM/ITMHW11oOUOX6NwAre5m hBJKh+Rz7ylLDLn33C4qowUhxnJlqqm+rDCVDTmoYngEFQvhEl19mfndSsC8P/K/ xXQJ+diS/Jug =orAS -----END PGP SIGNATURE----- Merge tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from CAN and BPF. We have a regression in TC currently under investigation, otherwise the things that stand off most are probably the TCP and AF_PACKET fixes, with both issues coming from 6.5. Previous releases - regressions: - af_packet: fix fortified memcpy() without flex array. - tcp: fix crashes trying to free half-baked MTU probes - xdp: fix zero-size allocation warning in xskq_create() - can: sja1000: always restart the tx queue after an overrun - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp - eth: nfp: avoid rmmod nfp crash issues - eth: octeontx2-pf: fix page pool frag allocation warning Previous releases - always broken: - mctp: perform route lookups under a RCU read-side lock - bpf: s390: fix clobbering the caller's backchain in the trampoline - phy: lynx-28g: cancel the CDR check work item on the remove path - dsa: qca8k: fix qca8k driver for Turris 1.x - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work() - eth: ixgbe: fix crash with empty VF macvlan list" * tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) rswitch: Fix imbalance phy_power_off() calling rswitch: Fix renesas_eth_sw_remove() implementation octeontx2-pf: Fix page pool frag allocation warning nfc: nci: assert requested protocol is valid af_packet: Fix fortified memcpy() without flex array. net: tcp: fix crashes trying to free half-baked MTU probes net/smc: Fix pos miscalculation in statistics nfp: flower: avoid rmmod nfp crash issues net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read ethtool: Fix mod state of verbose no_mask bitset net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() mctp: perform route lookups under a RCU read-side lock net: skbuff: fix kernel-doc typos s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp net/smc: Fix dependency of SMC on ISM ixgbe: fix crash with empty VF macvlan list net/mlx5e: macsec: use update_pn flag instead of PN comparation net: phy: mscc: macsec: reject PN update requests ... |
||
|
|
e2bca4870f |
af_packet: Fix fortified memcpy() without flex array.
Sergei Trofimovich reported a regression [0] caused by commit |
||
|
|
401644852d |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmUmkPUACgkQnJ2qBz9k QNkdrwf+JZGohQiTrj01GNJyVK5eH7PiAprGb3eZg6ChNZdaExGhw7Lwqf2CsIfc lEKJh9M/rN3G4Ph+ImB4R1j8oeU+kXuaYNNtUIQD1SpeGXGFEiKmt1k9asuR8cKx 6eWPbWpti8GNIc34W4HBsZifAqMp9sbcdNtMNvEGxmUVDR9LwuzhZkXX8flGjhb8 1DDLpG+/vkKXpZ8KmOyERb3bqi1czSdmjv7bhcAa060QEtXVh8CZmV7OW0rl1eUY 0Mw/m7IBv89tHtikUo7jiK7DS1uEHLUGuvYuhwUbaw/7wdgMee8vAiSKEZYZq+f8 fuO0cFB9WVrMX4THtiyMNuGFTQ19eA== =16Ci -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota regression fix from Jan Kara. * tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix slow quotaoff |
||
|
|
8527ca7735 |
net: skbuff: fix kernel-doc typos
Correct punctuation and drop an extraneous word. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231008214121.25940-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
b711538a40 |
hyperv-fixes for v6.6-rc6
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmUk4fcTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXhhqCACWsBYTB0EJ3oMJnzfnHeuN418ZDx/O AL0k0O5MT6roEFmvGUhzJ/jsoxL+W+Wj3aFwzReyOSQpgjTTF/Ja26LPvxRzDxKi sZPojnR2ykW31l7y+eh1p9qSM/aYvTMDP5zO7L1fBnWMAGMv8w8RezpCJ7bh4BgA FTMZZrvKYVT9hCGkYqKUZGBtDTPZ56WE+MCiRxTWQvF+4QKaIff0tpno8V7203bE D/b4+Ouh19RXFTC5dUq/0JtAdV2AadrPHnScUupc8Hk/MMFiU5CzvH4bAqiwXBcU YqqlD3kZbIqqbKE93+03jvyrRDvDGlq+rpA3KMk5MBAfrkM4DytpWvMs =SVq1 -----END PGP SIGNATURE----- Merge tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering) - fix hv_kvp_daemon to support keyfile based connection profile (Shradha Gupta) * tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv/hv_kvp_daemon:Support for keyfile based connection profile hyperv: reduce size of ms_hyperv_info x86/hyperv: Add common print prefix "Hyper-V" in hv_init x86/hyperv: Remove hv_vtl_early_init initcall x86/hyperv: Restrict get_vtl to only VTL platforms |
||
|
|
68d187ec14 |
sound fixes for 6.6-rc6
Here is the collection of pending fixes since a couple of weeks ago, which became slightly bigger than usual due to my vacation. Most of changes are about ASoC device-specific fixes while USB- and HD-audio received quirks as usual. All fixes, including two ASoC core changes, are reasonably small and safe to apply. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmUk8dAOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9B7w/8DZfnJmNWeG7h7Y2guTavAiil2K/0j5NFHl8E RW6XM/qBbnRPAlqN4j5OCYXRUC3VbuWWiQmdsDv0MOuyvQ/6v01pxK3IIlQ0gvUo Eo7e1gsnBVgU2le68HEGpU9CctGKUGUuOF2j8bKjjXWzOGurcJaMPUQPhew03z55 ZzvMjfqSMGFvvOpeVJsSNFFodHxlW96KY2kmJhT0YSegleqJN70ltY1041wKBfC7 y6CaJLD5yNlcTu+ZmAIm25jLW6m2NjI4wOgcRLc5P+CTEPqQUObCsZcgOJW/+SWt w8IybBF9Hx92KWiuorpxts7ob+lHAh0kyQrkMn1J1uKNfNr0keZWAF1QKZEt2KZP vckacgu9DYSPGgeDiL7UeNAr9tZLPyvvzPcNDYBwg3BLs3d0WLcSR3xvKdBgc9BL waN2wdsDEyVPCCxtsEldUhLuM6tp32MHhTC3Z+9FtT+qLzpIfG7GpL2VV9/xU8pg 7XzGWtt3c6+Hwdb0IZ6LABsjblcBQclovv9ywFqRD9azuYdTa2rvV0m2b1bHBqcm sxYd7ddv0lDq3kJYrIZHb4JNwWEpJkEu0b+tqPGdRbSY/UWqBwCQSZQuhVFxxofX XcNTTuLsBrPV5q/zRFJPxp1dlv4fqKPjiGOj/Q7xXgFrqgagDuK0IgGKjAsrENfz iQ03Vro= =2SOT -----END PGP SIGNATURE----- Merge tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of pending fixes since a couple of weeks ago, which became slightly bigger than usual due to my vacation. Most of changes are about ASoC device-specific fixes while USB- and HD-audio received quirks as usual. All fixes, including two ASoC core changes, are reasonably small and safe to apply" * tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: usb-audio: Fix microphone sound on Nexigo webcam. ALSA: hda/realtek: Change model for Intel RVP board ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset ALSA: hda: cs35l41: Cleanup and fix double free in firmware request ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM ASoC: tlv320adc3xxx: BUG: Correct micbias setting ASoC: rt5682: Fix regulator enable/disable sequence ASoC: hdmi-codec: Fix broken channel map reporting ASoC: core: Do not call link_exit() on uninitialized rtd objects ASoC: core: Print component name when printing log ASoC: SOF: amd: fix for firmware reload failure after playback ASoC: fsl-asoc-card: use integer type for fll_id and pll_id ASoC: fsl_sai: Don't disable bitclock for i.MX8MP dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif ASoC: soc-generic-dmaengine-pcm: Fix function name in comment ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP ASoC: simple-card: fixup asoc_simple_probe() error handling ASoC: simple-card-utils: fixup simple_util_startup() error handling ASoC: Intel: sof_sdw: add support for SKU 0B14 ... |
||
|
|
0412cc846a |
net: macsec: indicate next pn update when offloading
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
1d47ae2784 |
arm64 fixes for -rc5
- Workaround for Cortex-A520 erratum #2966298 - Fix typo in Arm CMN PMU driver that breaks counter overflow handling - Fix timer handling across idle for Qualcomm custom CPUs -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmUeiyIQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNMQjCAC5LDnQSuRJNea3eOjhT1Q4/mffiahbcDN0 +xdXgmDwbrXDG6uDlvFeqhocvd8g+mF8Z+NiLuYL1MLnm+dUrs2UWQ5n/XRIJ7vw VxH8PAai4zGvqEUMXizJi0OuOusCmGfRdZcbR+m6drLHeHGlqwnZha+/7C9xDN2m fqSzrtxn2lJsdP2kvYkHw2u7xDZK8rNu+KsEl6VBTBEfGs6wZbTz3S9+PRRYnhCi 4qh6X1rWiIZa1+bHWC2xnzCHU9Mfs9cOZs4ZF7RMisCLzH44fIgyCUMVYC+VjaFO G4cIjDJ8meAjmph8nXYEpKJLPrgE+75RodVpsB7cekwOhqYYUgvC =FWzt -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A typo fix for a PMU driver, a workround for a side-channel erratum on Cortex-A520 and a fix for the local timer save/restore when using ACPI with Qualcomm's custom CPUs: - Workaround for Cortex-A520 erratum #2966298 - Fix typo in Arm CMN PMU driver that breaks counter overflow handling - Fix timer handling across idle for Qualcomm custom CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer arm64: errata: Add Cortex-A520 speculative unprivileged load workaround arm64: Add Cortex-A520 CPU part definition perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7 |
||
|
|
4940c1543b |
drm fixes for 6.6-rc5
i915: - Fix for OpenGL CTS regression on Compute Shaders - Fix for default engines initialization - Fix TLB invalidation for Multi-GT devices amdgpu: - Add missing unique_id for GC 11.0.3 - Fix memory leak in FRU error path - Fix PCIe link reporting on some SMU 11 parts - Fix ACPI _PR3 detection - Fix DISPCLK WDIVIDER handling in OTG code tests: - Fix kunit release panel: - panel-orientation: Add quirk for One Mix 25 nouveau: - Report IB limit via getparams - Replace some magic numbers with constants - small clean up -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmUfkx4ACgkQDHTzWXnE hr6+zRAAhV1+R7KYcgSgEX/n+t/8rx11CZIJ1DkwJc1IwkbubuyFUAukXSGtPBQG ceCnt3p/tSzV4+X+LWbJQqjB6hnSVBKQvOvky871/A0vi4sVsjFDHyjK6MWVuW1A dKfMVE/asBgX93GlP94IDbTJ7K2VPSUYiqMlYUPnmjE29g8bdUoPgJbWwLxT84wf oLwtsaUZCMafzqI9eyqLIZlUMs59L+jiwsXqpZiHe3vHc6/rYcVluFUq3SUj1shb Bmtx39H7jTMUSODVNe8tvm+D8B4N8UAV5A64SpoHHQw4lBMHPYgwFihkNowYXi5R uj/1VT0e10PThN4jMqgOgtJku7iEapKyAnOXvEcrtOAPBavCZG/L5zm7v/OqTCAr SsFgntrXKOZ6VnGgfbvikY+EXeeYf3qqQDUnwxsRw2dbnbY9inWMKy4v2f6Hyg5x wfkqlPIwXjV3wS+tg2B978fm1CDXHrVW13mzcniZe76mHp1uAfe3C3dUT+4dw2uF 6QHglQg6yf8t7nIF6dPQGktAjqTzomVtX2iYdYUJ8VkgoyxQvp3dwiicGsZJfT+J GimSwqyMWGiDAprjg45F88jeM0/cF2et9vbS4Qe2pokq1/R2RTKpXdlzvDQKNKKr htpO7G1SkMxTAdHSI75yh2EQc2jlc//qhicj0/kmOCqRdvllcZA= =g4ze -----END PGP SIGNATURE----- Merge tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Regular weekly pull, all seems pretty normal, i915 and amdgpu mostly. There is one small new uAPI addition for nouveau but getting it in now avoids a bunch of userspace dances, and it's for a userspace that hasn't yet released, so should have no side effects. i915: - Fix for OpenGL CTS regression on Compute Shaders - Fix for default engines initialization - Fix TLB invalidation for Multi-GT devices amdgpu: - Add missing unique_id for GC 11.0.3 - Fix memory leak in FRU error path - Fix PCIe link reporting on some SMU 11 parts - Fix ACPI _PR3 detection - Fix DISPCLK WDIVIDER handling in OTG code tests: - Fix kunit release panel: - panel-orientation: Add quirk for One Mix 25 nouveau: - Report IB limit via getparams - Replace some magic numbers with constants - small clean up" * tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG pipes only drm/amd: Fix detection of _PR3 on the PCIe root port drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters() drm/amdgpu: Fix a memory leak drm/amd/pm: add unique_id for gc 11.0.3 drm/i915: Invalidate the TLBs on each GT drm/i915: Register engines early to avoid type confusion drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux inval drm/nouveau: exec: report max pushs through getparam drm/nouveau: chan: use channel class definitions drm/nouveau: chan: use struct nvif_mclass drm: panel-orientation-quirks: Add quirk for One Mix 2S drm/tests: Fix kunit_release_action ctx argument |
||
|
|
869b6ea160 |
quota: Fix slow quotaoff
Eric has reported that commit |
||
|
|
67f35a41d3 |
Short summary of fixes pull:
* test: Fix kunit release
* panel-orientation: Add quirk for One Mix 25
* nouveau:
* Report IB limit via getparams
* Replace some magic numbers with constants
* Clean up
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmUegR8ACgkQaA3BHVML
eiNk5wf8CleJC0X6F5irM7xjamBPCQw2hUPWSjmJEDk+aR6d1T6WhAy5gvc3InVB
JrxniPnW5ivP1jsgZJL7sFqZxMBXr494TwXs3FoCm+JXdokyZY6V2SvgxgnKIZnr
6RfwLDVzh8SGfudZCTRHTAHOv5oXLpReAC/O2k9wRTIKMRZt29daA9lBYBuULiOa
mY6/Das6mnFlL5jrleH5NfPhg3ovyAkBYpOcyg8HtCpWij7sHUwzYnH3ebEsQGa7
1/kD2DNCm79jpao2TMnoBub2d8+ZUytBCvwqXqTZDpmadqpN76C4/UMg8TVURUdq
eXEECW5lSD7spXOPbCSy5mRYlsMhew==
=FxmP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-10-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* test: Fix kunit release
* panel-orientation: Add quirk for One Mix 25
* nouveau:
* Report IB limit via getparams
* Replace some magic numbers with constants
* Clean up
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005092632.GA17332@linux-uq9g
|
||
|
|
f291209eca |
Including fixes from Bluetooth, netfilter, BPF and WiFi.
I didn't collect precise data but feels like we've got a lot
of 6.5 fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(),
it doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size,
fix struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use
of the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JAtc
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.
I didn't collect precise data but feels like we've got a lot of 6.5
fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it
doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size, fix
struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use of
the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length"
* tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
MAINTAINERS: update Matthieu's email address
mptcp: userspace pm allow creating id 0 subflow
mptcp: fix delegated action races
net: stmmac: remove unneeded stmmac_poll_controller
net: lan743x: also select PHYLIB
net: ethernet: mediatek: disable irq before schedule napi
net: mana: Fix oversized sge0 for GSO packets
net: mana: Fix the tso_bytes calculation
net: mana: Fix TX CQE error handling
netlink: annotate data-races around sk->sk_err
sctp: update hb timer immediately after users change hb_interval
sctp: update transport state when processing a dupcook packet
tcp: fix delayed ACKs for MSS boundary condition
tcp: fix quick-ack counting to count actual ACKs of new data
page_pool: fix documentation typos
tipc: fix a potential deadlock on &tx->lock
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
ipv4: Set offload_failed flag in fibmatch results
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
...
|
||
|
|
a43e8e9ffa |
net: mana: Fix oversized sge0 for GSO packets
Handle the case when GSO SKB linear length is too large.
MANA NIC requires GSO packets to put only the header part to SGE0,
otherwise the TX queue may stop at the HW level.
So, use 2 SGEs for the skb linear part which contains more than the
packet header.
Fixes:
|
||
|
|
059217c18b |
tcp: fix quick-ack counting to count actual ACKs of new data
This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.
The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.
When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.
And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.
The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.
Fixes:
|
||
|
|
c56e67f3ff |
netfilter pull request 2023-10-04
-----BEGIN PGP SIGNATURE----- iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmUdcDQNHGZ3QHN0cmxl bi5kZQAKCRBwkajZrV/2AOf7EACipnPx/532GUk1pECg+iWGTfhFOu1jdHjAILzy +Ft/kfTLvd8kfZg6DuKIb6KYfj7w7uQ/xcD6wfqV8HBcss0SOyilx2ZUgH8ThwDv tSIsUsx1M1gOGkXK713GrD6h/PR5BBv3vVFymvr+MliYH4C2mmsGOGWk5D+s8IqU q3XDMMMlsZpfqCA8QGKK7TkFhnvnHdeoHGhZhw9ywXik733Qa4OUbJ5tkxztDKrr DKF/FhpYxWPKHURtPXaQpWuni7xbMjg+3lHYlWTRZkQRQOoPWidBuTumqJxvwT3Z FYwlS7T7OBMiFByy4spBnBs0uGiA6rR3sZ2/Gn98o9HpYlCllxpZm53Ay0u8sZTL RBhMkacOXTWN5n1fbIqHIZc6vs7Tm1crvT2V/CseAuhe9TDiD5cHkaz7hJUQif6h dmF48QHCHuSgWGtyPmVbTDSZ02YF++R398zHuBM2TXkFz8B9vI5DRpbXw0yX4ktg LZSKnBALOPN5Ye27+W+itNfNaMC3+Elto3Cv9IvpTaXWl8WpF8hnNagLObEXxJ1Q 3dLRKpSHDKJe7BLQoqm9ESFUE80bZr+S1Xleukz0z7AamCrM/rxQGKBwbTJs2NoE 1YezWzhw68+aQ7BY8eWigDAQKmtn1Oju3v5u5IekGKQVvXd5x97VGlJQRVxQvr2Z jDHNFw== =YLDi -----END PGP SIGNATURE----- Merge tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
513dbc10cf |
page_pool: fix documentation typos
Correct grammar for better readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
72897b2959 |
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmUT/FoACgkQ10qiO8sP aAAeqg/+Iaim4AFPPDeWUvSARyqcMIKqmDtaFqkXE+OY8oahbvvbnGuLM/v/7V3r NG5pzoi0gqFasF+DC1lNWFUnmtWdjzjhhY9FInoWgiNO04V48c3NPI/YF/2Yvy0x biJxSsiaY+buY/p2QOXvlXHetnaftXNikFPZaD1mVGG/GIGZAwqqUO/EkIdliZf5 q/RBt5jzMF/nXTRIGc53kq7tKT97gGnDDYMych0U130PlyyqAZ+iAsR9UbiPa+ww Z1JB8qZO72Hx9iN0WMjXNBX8vxC961Dj+fkttgJqZALTk0UqQitwcsIJgM29JjTG VHsxHMdZAROFGaEHdMs1eHkqHkqyOxA4Jhr5LAci/chzgKkRw2I2LAXndOeg5TLH cWdhNjRW/ZJ64czr5hALQQxK4nj8m7SPFHY/6UuBnNHEXCjr7vUcuhcoK63Kb6Np 6Sg4jtyhakaXemqjhcmIYNF1dG5CDbUmQXFkj9Z9EEyHjAzGJ7ASmdhHwlBQnJuH 39ESEky2zQINAJbisaw9R2zj+V9Ia/mFSbi2q30kX5J4xTHGIURNo9OPkLAQWDdw 6u/d5VZLigliIK+Qj8kVtn41wmUEwB3W5Aq4CI7xB91vKRHCUZQvZ5xBJfHtk2pD 7VIzZscReWCsQP9T0hv38jeaw4m/P+mZO1iOC2qxveJvrQogZMk= =OL/S -----END PGP SIGNATURE----- Merge tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
4785aa8028 |
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
Arm® Functional Fixed Hardware Specification defines LPI states,
which provide an architectural context loss flags field that can
be used to describe the context that might be lost when an LPI
state is entered.
- Core context Lost
- General purpose registers.
- Floating point and SIMD registers.
- System registers, include the System register based
- generic timer for the core.
- Debug register in the core power domain.
- PMU registers in the core power domain.
- Trace register in the core power domain.
- Trace context loss
- GICR
- GICD
Qualcomm's custom CPUs preserves the architectural state,
including keeping the power domain for local timers active.
when core is power gated, the local timers are sufficient to
wake the core up without needing broadcast timer.
The patch fixes the evaluation of cpuidle arch_flags, and moves only to
broadcast timer if core context lost is defined in ACPI LPI.
Fixes:
|
||
|
|
1eb3dee16a |
bpf-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b BkCQknVbFTSw/8l8pzUW123Fb46wUAQ= =E3hd -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
8e56b063c8 |
netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp
In Scenario A and B below, as the delayed INIT_ACK always changes the peer
vtag, SCTP ct with the incorrect vtag may cause packet loss.
Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK
192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772]
192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151]
192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772]
192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] *
192.168.1.2 > 192.168.1.1: [COOKIE ECHO]
192.168.1.1 > 192.168.1.2: [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: [COOKIE ACK]
Scenario B: INIT_ACK is delayed until the peer completes its own handshake
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO]
192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] *
This patch fixes it as below:
In SCTP_CID_INIT processing:
- clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] &&
ct->proto.sctp.init[!dir]. (Scenario E)
- set ct->proto.sctp.init[dir].
In SCTP_CID_INIT_ACK processing:
- drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] &&
ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C)
- drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] &&
ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A)
In SCTP_CID_COOKIE_ACK processing:
- clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir].
(Scenario D)
Also, it's important to allow the ct state to move forward with cookie_echo
and cookie_ack from the opposite dir for the collision scenarios.
There are also other Scenarios where it should allow the packet through,
addressed by the processing above:
Scenario C: new CT is created by INIT_ACK.
Scenario D: start INIT on the existing ESTABLISHED ct.
Scenario E: start INIT after the old collision on the existing ESTABLISHED
ct.
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408]
192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885]
(both side are stopped, then start new connection again in hours)
192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742]
Fixes:
|
||
|
|
d59e75eef5 |
drm/nouveau: exec: report max pushs through getparam
Report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM. While the maximum number of IBs per ring might vary between chipsets, the kernel will make sure that userspace can only push a fraction of the maximum number of IBs per ring per job, such that we avoid a situation where there's only a single job occupying the ring, which could potentially lead to the ring run dry. Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that all channels of a given device have the same ring size. Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com |
||
|
|
4b2b606075 |
ipv4/fib: send notify when delete source address routes
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit
|
||
|
|
e81a2dabc3 |
Kbuild fixes for v6.6 (2nd)
- Fix the module compression with xz so the in-kernel decompressor works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
-----BEGIN PGP SIGNATURE-----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=RJdX
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the module compression with xz so the in-kernel decompressor
works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove stale code for 'source' symlink in packaging scripts
modpost: Don't let "driver"s reference .exit.*
vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
modpost: add missing else to the "of" check
Documentation: kbuild: explain handling optional dependencies
kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
|
||
|
|
d2c5231581 |
Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain
to issues which were introduced after 6.5. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak= =sf/5 -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC |
||
|
|
373ceff28e |
Fix a spurious kernel warning during CPU hotplug events that
may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmUZMnoRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ik9Q/+NR+Uq+hJUYMg00FF6f78SBwEXQ0vnfhs fGxnJMCRAfX4zEnCl4gNkIHy9k0n5/NY30YTkHlrLWktS4glSAUHCMDCr5FhyNGF IHwShR6bw2D2JJP6hOuM5MXOw5XewJRv95QC4mzzS2+loy7Vtte9WtJc9E07el/n 6bH5HyJKY/oR/r1kQTMpNoPzbNSGe8wDGZesjBeKBfgp7ZZ5ZTf/cwnJxL+C4nG0 VTZ2pawgT8+pWuEp3WpWE35dYcYWkpxw0wOXMxV1rymmA7+X1NJ+aH7DHp4e3o00 dHih13GrZek4FKzSeH0nGGW/jrO6ap942yNhlsLzJXI8UiaAt+T3j83020d7zlAx 1j2KSwWggBbolL+vzDtOaDJ7rx/xLWeN9ofAlnBmOmYwaWeR31ZtDqPq2ObN5eJ1 T/ALFQ9SNCn5khfYLKJQzZJSGCJ+1N6Wvl5huVil16WG88BzVc5WkxdC1LhJ5cEZ EwnaDwk0R9iQjok+7zxsIrD/CBe3ugsfOQb18i2xoP2MC1ivOo5HYAvVeT7Oy6nw f1zWd3VuLg+/iieoNnHSIZGsnmpJlpF3piNGCt65P0W0qZlSekOlK68ExB/npriO lCpKI50ATmup+FVa2riJZ3EhODEdlx8umb7gOaxjQSrMgkAIItrK02BQ6I5iAWKh JC+yQa8SN/g= =Ms07 -----END PGP SIGNATURE----- Merge tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe |
||
|
|
5baa0433a1 |
neighbour: fix data-races around n->output
n->output field can be read locklessly, while a writer
might change the pointer concurrently.
Add missing annotations to prevent load-store tearing.
Fixes:
|
||
|
|
c15cd642d4 |
bluetooth pull request for net:
- Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmULNMMZHGx1aXoudm9u LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKYF+D/4lgcowz8/5ry6Idp1yDR4r H4ns/Q199jUlLRKjUQxwGcAM3mp5JlM+ZGjHooFHZmXhthRCvqv2poyheVq9GdQT 46yCwAWSK+PmHlXzLUQrPK7eNUwFCG5T6wVtvQHMybN1sf3fBfR9TMZup4rMHUtI Zdz2e2WxiFj07TaSWIDh966YTPxq0uGEB+Fl7UQXnd4rlWWbke7uD6XcNm2b5+M5 mSeJUXfr+w3RUcNMT86OQ+vDlRTkzBN7zWkHvskI9o8wnnkkNPoUvIb7nJH6BafP iKHgC28eBI+8GXLTgC4GQs/LHQpTOPI6u2WSEjVImAdtTqMum4d7x55Tf+l8sY/G J222Izqt0cAvmPbkV+GLhtVzASfaE5Dmz5ORFf3r/sbG1TYndBnrjGUvFMr++D6r Bl19piDj08+k2GeJVJpnKNRDDycGnrxOZfbAKbezQSuFCU252RiIpT+FwJvkkkg2 epX1VJk0JQiE3MO7fOEO65smRxxQp/mWgNaCbZgbEeK1o/erKAPXCjTP3AMZ/kEW 2rrxQisv/BzaEBWrQSM3+1r7omzngOVfOJtlXmN94kIDJBCdM7A2Y5VRajgMR+tC uxfS4YeClB/dl217Yh4bcvZYYse+opkHH5c+nmC+Q+Lr1ZxMcgqWpY8fr/AtdJbB yMBTfPKX0BCb0NKZinPtxQ== =L6VV -----END PGP SIGNATURE----- Merge tag 'for-net-2023-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
|
15e86643d5 |
vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
Remove the left-over of commit
|
||
|
|
3b517966c5 |
dma-mapping fixes for Linux 6.6
- fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmUYWTULHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYMilA/8DomLRCrDy792MoRvBCThWaY6auW4bCUoY7S6VZe7 LVECKAJRwFH7b+dk1mNjPhWTyq8/wB7kr/OLuU9HDcVIeiP9zxks4BMQ4RGc/ZuK rSZ5ZHPVVCC4EOI3ncjQXrODwgGkGUvtdriByCtX2r4NLBjO1T0vUQB4bLyBTZf+ GnTCLxCkSrIxaqniRvM0K34yO/0rq0ci5840MNneR7MKQkVqPUDY83sHwL1KcQPf s16lwclQdjZdOVpFMPxFin5NpvPIrjdrvhoaxdnz+8ZuwSACqRUZDQuNlZ3+Zep6 iaynNR04o0c2p0PTT5l3ZRD5vsyCjvc+/3kB3KlM33XbBArWi6XV+694QQn59JnZ 5MmHoIulwZGLsIlTG188QreZBlLrmxylUX311Kot5ood/HW8DsYbTo/krbiiUgEk MXKWq9k6cQOdhgriS4zxvUl+xkjby12jvSFxv9tN3HHvFsFB8+veVrTuLZzEDXpX a5PrmI/dcQmlVpCZllzVzeTgL2KeE1Jo0uRZ1vXhuoX8IBys4/TstIXOB4jnyVb4 kzrHbLIoVqLSN42eVMRKBrqGXGlZSWETBpkdSQ41St6t/3MurhKAWZ/1SFPXlI06 SnatIdOU7nSZRofK8/Xe1CnWia5NUpyUQpb+tLUHTgo4kZzGV330bf34iJ+BvC1h aks= =bhgc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas |
||
|
|
935d4f0c6d |
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit |
||
|
|
a8091f039c |
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes:
|
||
|
|
5c590804b6 |
maple_tree: add mas_is_active() to detect in-tree walks
Patch series "maple_tree: Fix mas_prev() state regression". Pedro Falcato retported an mprotect regression [1] which was bisected back to the iterator changes for maple tree. Root cause analysis showed the mas_prev() running off the end of the VMA space (previous from 0) followed by mas_find(), would skip the first value. This patchset introduces maple state underflow/overflow so the sequence of calls on the maple state will return what the user expects. Users who encounter this bug may see mprotect(), userfaultfd_register(), and mlock() fail on VMAs mapped with address 0. This patch (of 2): Instead of constantly checking each possibility of the maple state, create a fast path that will skip over checking unlikely states. Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
ce60f27bb6 |
mm: abstract moving to the next PFN
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes:
|
||
|
|
14c06b913d |
A series that fixes an involved "double watch error" deadlock in RBD
marked for stable and two cleanups. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmUW5QwTHGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHziw7+B/99D/BRIJUaCz8hm2xMZC3Yu6Cvi2de YlgHZBuHm5lmihzITEdoHTmWlIpgGchqjTaikCvVooKEe1w4sNr7nYFiXUFVw9sf W/I06dtlJlj2f4oyK91i4sIzpQKbXZznFDpTHThjRJt+uyUp3RYVbrCDMmGAnJv3 foppstycm5fe2Y2e/RgNyYOHY+EAjvS5UrpvT3lAX+iw5KXR1pyMBrFo8iICLPlZ TIPP4mwlVwb/WB1rGnxaK65RJxGuXLwuMWdLF9kq1ZeCld6owPH3x2RDax2+vMvA bZxI6gQymU2SquKiNseYF3kQ+2KdC5mfjmkoncOH79Je4JPHf7xa4LYZ =7/Ez -----END PGP SIGNATURE----- Merge tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A series that fixes an involved 'double watch error' deadlock in RBD marked for stable and two cleanups" * tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client: rbd: take header_rwsem in rbd_dev_refresh() only when updating rbd: decouple parent info read-in from updating rbd_dev rbd: decouple header read-in from updating rbd_dev->header rbd: move rbd_dev_refresh() definition Revert "ceph: make members in struct ceph_mds_request_args_ext a union" ceph: remove unnecessary check for NULL in parse_longname() |
||
|
|
95289e49f0 |
ATA fixes for 6.6-rc4
A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more details:
- Add missing additionalProperties on child nodes to the pata-common DT
bindings (Rob).
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas).
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias).
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me).
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk driver
resume operation not being synchronized with libata EH port resume
handling. This is addressed by changing the scsi disk driver disk
start/stop control to allow libata to execute disk suspend (spin
down) and resume (spin up) on its own during system suspend/resume.
Runtime suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races.
- Establish a link between ATA ports and SCSI devices to order PM
operations.
- Fix device removal to avoid issues with driver rmmod removal.
- Fix synchronization of libata device rescan and SCSI disk resume
operation.
- Remove libsas PM operations as suspend/resume is handled directly
by the sas controller resume.
- Fix the SCSI disk driver to not issue commands to suspended disks,
thus avoiding potential system lock-up on resume.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZRbR0gAKCRDdoc3SxdoY
dkArAP9PFTRgsXEwfE7arBXCwQqXj/W0R2KgKug7Fno+SoQLnAD/ZKe2TR50uwxr
9mwYROdMgi50T9ax1RX1jWA0npGXmQg=
=cFzG
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
|
||
|
|
dd9f9cc1e6 |
ASoC: core: Do not call link_exit() on uninitialized rtd objects
On init we have sequence:
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_pcm_runtime(card, dai_link);
ret = init_some_other_things(...);
if (ret)
goto probe_end:
for_each_card_rtds(card, rtd) {
ret = soc_init_pcm_runtime(card, rtd);
probe_end:
while on exit:
for_each_card_rtds(card, rtd)
snd_soc_link_exit(rtd);
If init_some_other_things() step fails due to error we end up with
not fully setup rtds and try to call snd_soc_link_exit on them, which
depending on contents on .link_exit handler, can end up dereferencing
NULL pointer.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
|
|
ff48b37802 |
scsi: Do not attempt to rescan suspended devices
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.
Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.
The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.
Fixes:
|
||
|
|
aa3998dbeb |
ata: libata-scsi: Disable scsi device manage_system_start_stop
The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit |
||
|
|
3cc2ffe5c1 |
scsi: sd: Differentiate system and runtime start/stop management
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes:
|
||
|
|
fb99ef1786 |
ata: libata-scsi: link ata port and scsi device
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes:
|
||
|
|
633b47cb00 |
SCSI fixes on 20230927
Single fix for libata: older devices don't support command duration limits (CDL) and some don't support report opcodes, meaning there's no way to tell if they support the command or not. Reduce the problems of incorrectly using CDL commands on older devices by checking SCSI spec compliance at SPC-5 (the spec which introduced the command) before turning on CDL. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZRQglCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYJdAP4rjE8a /X3Vs7C0PoFDl6HlkN3w4Eeq54vLMmxNez2tywEA6cB3RdwG58g34p8wBt7Lb6UI 1HAIhRub2mpHZyQH0/U= =qq6Q -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A single fix for libata: older devices don't support command duration limits (CDL) and some don't support report opcodes, meaning there's no way to tell if they support the command or not. Reduce the problems of incorrectly using CDL commands on older devices by checking SCSI spec compliance at SPC-5 (the spec which introduced the command) before turning on CDL" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: ata: Do no try to probe for CDL on old drives |
||
|
|
1a6a464774 |
timers: Tag (hr)timer softirq as hotplug safe
Specific stress involving frequent CPU-hotplug operations, such as
running rcutorture for example, may trigger the following message:
NOHZ tick-stop error: local softirq work is pending, handler #02!!!"
This happens in the CPU-down hotplug process, after
CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and
before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this
fragile intermediate state, softirqs waiting for threaded handling may be
forever ignored and eventually reported by the idle task as in the above
example.
However some vectors are known to be safe as long as the corresponding
subsystems have teardown callbacks handling the migration of their
events. The above error message reports pending timers softirq although
this vector can be considered as hotplug safe because the
CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration
of timers after the death of the CPU. Hrtimers also have a similar
hotplug handling.
Therefore this error message, as far as (hr-)timers are concerned, can
be considered spurious and the relevant softirq vectors can be marked as
hotplug safe.
Fixes:
|
||
|
|
2d5780bbef |
swiotlb: fix the check whether a device has used software IO TLB
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit |
||
|
|
753a4d531b |
ata: libata-sata: increase PMP SRST timeout to 10s
On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.
The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:
- Seagate IronWolf ST12000VN0008
- Seagate IronWolf ST8000NE0004
The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.
Fixes:
|
||
|
|
8a511e7efc |
ARM:
* Fix EL2 Stage-1 MMIO mappings where a random address was used
* Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
* Fix KVM_GET_REG_LIST API for ISA_EXT registers
* Fix reading ISA_EXT register of a missing extension
* Fix ISA_EXT register handling in get-reg-list test
* Fix filtering of AIA registers in get-reg-list test
x86:
* Fixes for TSC_AUX virtualization
* Stop zapping page tables asynchronously, since we don't
zap them as often as before
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
=+sqe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
|
||
|
|
2ad78f8cee |
cxl fixes for v6.6-rc3
- Fix multiple scenarios where platform firmware defined regions fail to
be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS native
AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security" commands
are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZQ9ZeAAKCRDfioYZHlFs
Z2b6AQDCNGMZdvJXwXW8LY/GHzJvuIWzvzSf0/Zy050Q1s4qrQEAqmmKCXtzjtMV
PQLm9o3a96Wb/zSzRZJwMVCTyXClVwg=
=sSix
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
|
||
|
|
85eba5f175 |
13 hotfixes, 10 of which pertain to post-6.5 issues. The other 3 are
cc:stable. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP X6uc2cYHc9DG5/o44iFgadW8byMssQs= =w+St -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "13 hotfixes, 10 of which pertain to post-6.5 issues. The other three are cc:stable" * tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: proc: nommu: fix empty /proc/<pid>/maps filemap: add filemap_map_order0_folio() to handle order0 folio proc: nommu: /proc/<pid>/maps: release mmap read lock mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement pidfd: prevent a kernel-doc warning argv_split: fix kernel-doc warnings scatterlist: add missing function params to kernel-doc selftests/proc: fixup proc-empty-vm test after KSM changes revert "scripts/gdb/symbols: add specific ko module load command" selftests: link libasan statically for tests with -fsanitize=address task_work: add kerneldoc annotation for 'data' argument mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning |
||
|
|
93397d3a2f |
LoongArch fixes for v6.6-rc3
-----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmUKki4WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImepsVEACcMAw3/Gg3ldIDlV6mWSYGn6kA eF2Cc89q4C53CYYlYHalBqVdOObonR0g4roz385UjlGXeVtOuYzKB2DMy8GE3V7s 63Q82jpkGtgpJ9/md+2FnOoaT6CiN+kbcwdbSmEsz+9yht9IzRlO5R0urH92jwsU wpnFzGtn1kHgGv+yC8XQDvk5ZvYiiA9bWrXiaLl+aEF0qeQBhgI+f7+Jew/VWBNR ykH0TcOp0cjt7AqYlOHb3YXqwIO6U5sVLIfrHzCxKkrfeV/DE8J0FU3/YQ/okMr7 tjBJxS4o1UsNyT+9ItXjqYClOAy1IaW+2UmC8r2k79hZKEyicHu3/o7xpBCvoQoa 9OAKFAtO1UyX3h3uUynouaSXCuQ48GAetnkGMFuhuUVlF9Aq9OdA6lAWeuolkace VYs3djjkAvsWq6HH2tm5lpcq8jXsbc2QRbHl+f4BGgyoXtEk7NXsqfPcvJeFDMFF /PKYFQnPWebv4LoqxSNjN7S7S23N0k9tH+lITX8WvMJzRQaUTt4S19e7YHotNMty UXDBIW6mjVIOT11zzNcsEzkMXA/8Q4VvZbQy67nfweg8KMLMChBdkRphK+4pOLN/ 0Pvge3SAAVI/cdNWOxwqzvHvQbqVsjb4p4GmghPSLOojFPKW47ueWm8xeq/Hd05r ssZZGOC8/H1AqDvOIw== =EKBZ -----END PGP SIGNATURE----- Merge tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix lockdep, fix a boot failure, fix some build warnings, fix document links, and some cleanups" * tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: docs/zh_CN/LoongArch: Update the links of ABI docs/LoongArch: Update the links of ABI LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem() kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage LoongArch: Set all reserved memblocks on Node#0 at initialization LoongArch: Remove dead code in relocate_new_kernel LoongArch: Use _UL() and _ULL() LoongArch: Fix some build warnings with W=1 LoongArch: Fix lockdep static memory detection |
||
|
|
5804c19b80 |
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmUMDssACgkQrUjsVaLH LAckSg/+IZ5DPvPs81rUpL3i1Z5SrK4jXWL2zyvMIksBEYmFD2NPNvinVZ4Sxv6u IzWNKJcAp4nA/+qPGPLXCURDe1W6PCDvO4SShjYm2UkPtNIfiskmFr3MunXZysgm I7USJgj9ev+46yfOnwlYrwpZ8sQk7Z6nLTI/6Osk4Q7Sm0Vjoobh6krub7LNjeKQ y6p+vxrXj+Owc5H9bgl0wAi6GOmOJKAM+cZU5DygQxjOgiUgNbOzsVgbLDTvExNq gISUU4PoAO7/U1NKEaaopbe7C0KNQHTnegedtXsDzg7WTBah77/MNBt4snbfiR27 6rODklZlG/kAGIHdVtYC+zf8AfPqvGTIT8SLGmzQlyVlHujFBGn0L41NmMzW+EeA 7UpfUk8vPiiGhefBE+Ml3yqiReogo+aRhL1mZoI39rPusd7DMnwx97KpBlAcYuTI PTgqycIMRmq2dSCHya+nrOVpwwV3Qx4G8Alpq1jOa7XDMeGMj4h521NQHjWckIK2 IJ2a0RtzB10+Z91nLV+amdAno326AnxJC7dR26O6uqVSPJy/nHE2GAc49gFKeWq6 QmzgzY1sU2Y02/TM8miyKSl3i+bpZSIPzXCKlOm1TowBKO+sfJzn/yMon9sVaVhb 4Wjgg3vgE74y9FVsL4JXR/PfrZH5Aq77J1R+/pMtsNTtVYrt1Sk= =ytFs -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv fixes for 6.6, take #1 - Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test |