commit 81adbd3ff2 upstream.
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
Fixes: 1e4d58cd7f ("drm/bridge: adv7533: Create a MIPI DSI device")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 902806baf3 ]
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4641169a8c ]
A stream without dsc_aux should not be eliminated from
the dsc determination. Whether it needs a dsc recompute depends on
whether its mode has changed or not. Eliminating such a no-dsc stream
from the dsc determination policy will end up with inconsistencies
in the new dc_state when compared to the current dc_state,
triggering a dsc recompute that should not have happened.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9b5a82c53 ]
[Why]
This fixes a bug introduced by commit c536555451 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 4641169a8c ("drm/amd/display: Fix incorrect DSC recompute trigger")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 438b39ac74 ]
When using MES creating a pdd will require talking to the GPU to
setup the relevant context. The code here forgot to wake up the GPU
in case it was in suspend, this causes KVM to EFAULT for passthrough
GPU for example. This issue can be masked if the GPU was woken up by
other things (e.g. opening the KMS node) first and have not yet gone to sleep.
v4: do the allocation of proc_ctx_bo in a lazy fashion
when the first queue is created in a process (Felix)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62ec7d38b7 ]
Convert some pr_* to some dev_* APIs to identify the device.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 438b39ac74 ("drm/amdkfd: pause autosuspend when creating pdd")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0021d70a06 ]
I think this was an abstraction back from when
kfd supported both radeon and amdgpu. Since we just
support amdgpu now, there is no more need for this and
we can use the amdgpu structures directly.
This also avoids having the kfd_cu_info structures on
the stack when inlining which can blow up the stack.
Cc: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 438b39ac74 ("drm/amdkfd: pause autosuspend when creating pdd")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abe1cbaec6 ]
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf424020e0 ]
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b8dcabb5 ]
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2bc61638 ]
when use cpu to do page table update under sriov runtime, since mmio
access is blocked, kiq has to be used to flush hdp.
change WREG32_NO_KIQ to WREG32 to allow kiq.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: c9b8dcabb5 ("drm/amdgpu/hdp4.0: do a posting read when flushing HDP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e54b00086f ]
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 85230ee36d upstream.
Third time's the charm, I hope?
Fixes: d3116756a7 ("drm/ttm: rename bo->mem and make it a pointer")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3837
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 695c2c745e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a93b1020eb ]
Since 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ae520cb12)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1622ed27d2 ]
On gt reset, if a context is running, then accumulate it's active time
into the busyness counter since there will be no chance for the context
to switch out and update it's run time.
v2: Move comment right above the if (John)
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7ed047da59)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a0b46788 ]
Active busyness of an engine is calculated using gt timestamp and the
context switch in time. While capturing the gt timestamp, it's possible
that the context switches out. This race could result in an active
busyness value that is greater than the actual context runtime value by a
small amount. This leads to a negative delta and throws off busyness
calculations for the user.
If a subsequent count is smaller than the previous one, just return the
previous one, since we expect the busyness to catch up.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
(cherry picked from commit cf907f6d29)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abcc2ddae5 ]
On GT reset, we store total busyness counts for all engines and
re-register the utilization buffer with GuC. At that time we should
reset the buffer, so that we don't get spurious busyness counts on
subsequent queries.
To repro this issue, run igt@perf_pmu@busy-hang followed by
igt@perf_pmu@most-busy-idle-check-all for a couple iterations.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit abd318237f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47f402a3e0 ]
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73dae652dc upstream.
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 928cd772e1 ]
It is not necessarily corrupted. When there is RAS fatal error, device
memory access is blocked. Hence vcpu bo cannot be saved to system memory
as in a regular suspend sequence before going for reset. In other full
device reset cases, that gets saved and restored during resume.
v2: Remove redundant code like vcn_v4_0 did
v2: Refine commit message
v3: Drop the volatile
v3: Refine commit message
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe260df55 ]
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32e7ee293f ]
Need to dereference the atcs acpi buffer after
the method is executed, otherwise it will result in
a memory leak.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b22f04833 ]
Port this change to vega20_ih.c:
commit afbf7955ff ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2320c9e6a7 ]
drm_sched_job_init() has no control over how users allocate struct
drm_sched_job. Unfortunately, the function can also not set some struct
members such as job->sched.
This could theoretically lead to UB by users dereferencing the struct's
pointer members too early.
It is easier to debug such issues if these pointers are initialized to
NULL, so dereferencing them causes a NULL pointer exception.
Accordingly, drm_sched_entity_init() does precisely that and initializes
its struct with memset().
Initialize parameter "job" to 0 in drm_sched_job_init().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021105028.19794-2-pstanner@redhat.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a500f3751d ]
GCC 15 enables -Werror=unterminated-string-initialization by default.
This results in the following build error
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c: In function ‘is_hdmi_adaptor’:
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c:164:17: error: initializer-string for array of
‘char’ is too long [-Werror=unterminated-string-initialization]
164 | "DP-HDMI ADAPTOR\x04";
| ^~~~~~~~~~~~~~~~~~~~~
After discussion with Ville, the fix was to increase the size of
dp_dual_mode_hdmi_id array by one, so that it can accommodate the NULL
line character. This should let us build the kernel with GCC 15.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002092311.942822-1-brahmajit.xyz@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e2da6a50 ]
It is possible, although unlikely, that an integer overflow will occur
when the result of radeon_get_ib_value() is shifted to the left.
Avoid it by casting one of the operands to larger data type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a16b5cdae ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-4-liaochen4@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e2ab24cd7 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-2-liaochen4@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428656feb9 ]
Add quirk orientation for AYA NEO GEEK. The name appears without
spaces in DMI strings. The board name is completely different to
the previous models making it difficult to reuse their quirks
despite being the same resolution and using the same orientation.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40350b0d63fe2b54e7cba1e14be50917203f0079.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7972d735c ]
Add quirk orientation for AYA NEO Founder. The name appears with spaces in
DMI strings as other devices of the brand. The panel is the same as the
NEXT and 2021 models. Those could not be reused as the former has VENDOR
name as "AYANEO" without spaces and the latter has "AYADEVICE".
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71889a0b39f13f4b78481bd030377ca15035680.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 361ebf5ef8 ]
Add quirk orientation for AYA NEO 2. The name appears without spaces in
DMI strings. That made it difficult to reuse the 2021 match. Also the
display is larger in resolution.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2b35545b77a9fd8c9699b751ca282226dcecb1dd.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 014eccc9da ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-7-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e5646178 ]
We regularly get dmesg error reports of:
[ 18.184066] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[ 18.184098] MAI: soc_pcm_open() failed (-19)
These are generated for any disconnected hdmi interface when pulseaudio
attempts to open the associated ALSA device (numerous times). Each open
generates a kernel error message, generating general log spam.
The error messages all come from _soc_pcm_ret in sound/soc/soc-pcm.c#L39
which suggests returning ENOTSUPP, rather that ENODEV will be quiet.
And indeed it is.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-5-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f756dbac1c upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6fa67d26d upstream.
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d49e77a97 upstream.
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2fccac61 upstream.
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
Cc: <stable@vger.kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125205314.1725887-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c98b10496b ]
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
