err initial value should be -EAGAIN. Otherwise 2nd iteration always
fails in the case as[0] is occupied.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The 'struct notifier_block' is not used in linux/iommu.h but
not declared anywhere. Add a forward declaration for it.
Reported-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The linux/iommu.h header uses types defined in linux/types.h but doesn't
include it.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add missing free_domain_mem on failure path after alloc_domain.
A simplified version of the semantic match that finds this
problem is as follows: (http://coccinelle.lip6.fr/)
// <smpl>
@km exists@
local idexpression e;
expression e1,e2,e3;
type T,T1;
identifier f;
@@
* e = alloc_domain(...)
... when any
when != e = e1
when != e1 = (T)e
when != e1(...,(T)e,...)
when != &e->f
if(...) { ... when != e2(...,(T1)e,...)
when != e3 = e
when forall
(
return <+...e...+>;
|
* return ...;
) }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If list_for_each_entry, etc complete a traversal of the
list, the iterator variable ends up pointing to an address
at an offset from the list head, and not a meaningful
structure. Thus this value should not be used after the end
of the iterator. Replace c->dev by dev, which is the value
that c->dev has been compared to.
This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
mx27pdk has a mc13783 audio codec.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The clean target uses brace expansion to remove some generated files. However,
the default shells on many systems do not support this feature resulting in
some generated files not being removed by clean.
Signed-off-by: Palmer Cox <p@lmercox.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343598883-17907-1-git-send-email-p@lmercox.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf kvm top' shows a continual flurry of:
Can't find guest [5201]'s kernel information
if it can't find the guest info and with a lot of VMs running a user has no
chance of reading them all. Limit message to once per guest.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Built on rblist - like strlist. Used in the next patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replaces the direct use of rbtree code with the rblist API. In the end
the patch is a no-op on strlist functionality; the API for strlist is
not changed, only its implementaton.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
rblist is the rbtree based code from strlist. It will be the common code
for strlist and the to-be-introduced intlist.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only want to process directories under the guestmnount directory that
have a pid as a name (ie, all digits). Other entries in the guestmount
directory should be ignored. There is already a check that requires the
first character of each entry to be a digit, but atoi is used to convert
the directory name to a pid. For example if guestmount contains a
directory with the name 1foo, atoi converts it to a pid of 1 and a
machine is created with a pid of 1. This is wrong; this directory really
should be ignored. Use strtol to do that.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343616875-6455-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A number of builtin commands process some user args and then pass the rest to
cmd_record. cmd_record then saves argc/argv that it receives into the header of
the perf data file. But this loses the arguments handled by the first command
-- ie., the real command line from the user. This patch saves the command line
as typed by the user rather than what was passed to cmd_record.
As an example consider the command:
$ perf kvm --guest --host --guestmount=/tmp/guest-mount record
-fo /tmp/perf.data -ag -- sleep 10
Currently the command saved to the header is:
cmdline : /tmp/p3.5/perf record -o perf.data.kvm -fo /tmp/perf.data -ag -- sleep 1
(ignore the duplicated -o -- the first would be yet another bug with perf-kvm).
With this patch the command line saved to the header is:
cmdline : /tmp/p3.5/perf kvm --guest --host --guestmount=/tmp/guest-mount
record -fo /tmp/perf.data -ag -- sleep 1
v2: simplified to saving the command in parse_options per Stephane's suggestion
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1343616831-6408-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
5a7ed29 fixed up perf-record but not perf-top. Similar argument holds
for it -- fallback to PMU only if it does not exist and handle invalid
attributes separately.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1343616783-6360-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We change fsl_add_bridge to return -ENODEV if the controller is working in
agent mode. Then check the return value of fsl_add_bridge to guarantee
that only successfully added host bus will be scanned.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
It's quite legitimate for a DT node to specify #size-cells=0. One example
is a node that's used to collect a number of non-memory-mapped devices.
In that scenario, there may be multiple child nodes with the same name
(type) thus necessitating the use of unit addresses in node names, and
reg properties:
/ {
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
...
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
...
};
...
};
};
However, #size-cells=0 prevents translation of reg property values into
the parent node's address space. In turn, this triggers the kernel to
emit error messages during boot, such as:
prom_parse: Bad cell count for /regulators/regulator@0
To prevent printing these error messages for legitimate DT content, a
number of changes are made:
1) of_get_address()/of_get_pci_address() are modified only to validate
the value of #address-cells, and not #size-cells.
2) of_can_translate_address() is added to indicate whether address
translation is possible.
3) of_device_make_bus_id() is modified to name devices based on the
translated address only where possible, and otherwise fall back to
using the (first cell of the) raw untranslated address.
4) of_device_alloc() is modified to create memory resources for a device
only if the address can be translated into the CPU's address space.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
This prepares *of_device_id.data becoming const. Without this change the
following warning would occur:
drivers/tty/serial/imx.c: In function 'serial_imx_probe_dt':
drivers/tty/serial/imx.c:1430:17: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/spi/spi-omap2-mcspi.c: In function 'omap2_mcspi_probe':
drivers/spi/spi-omap2-mcspi.c:1118: warning: assignment discards qualifiers from pointer target type
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares *of_device_id.data becoming const. Without this change the
following warning would occur:
drivers/spi/spi-imx.c: In function spi_imx_probe:
drivers/spi/spi-imx.c:814:24: warning: assignment discards const qualifier from pointer target type [enabled by default]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
In order to have audio functional on mx6qsabrelite, it is necessary
to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides
the audio clock.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Move snd_legacy_find_free_ioport() function back to initval.h as it is used
by two drivers.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When period=1, the driver tries to allocate a bit bigger buffer than
requested by the user due to the irq latency tolerance. This may lead
to accesses over the actually allocated pages.
This patch adds a check of the page index and assigns the silent page
when it's over the given buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Directly comparing task_struct->personality against PER_* is not fully
correct, as it doesn't take flags potentially stored in top three bytes
into account.
Analogically, directly forcefully setting personality to PER_LINUX32 or
PER_LINUX discards any flags stored in the top three bytes.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
I met a odd prblem:read /proc/partitions may return zero.
I wrote a file test.c:
int main()
{
char buff[4096];
int ret;
int fd;
printf("pid=%d\n",getpid());
while (1) {
fd = open("/proc/partitions", O_RDONLY);
if (fd < 0) {
printf("open error %s\n", strerror(errno));
return 0;
}
ret = read(fd, buff, 4096);
if (ret <= 0)
printf("ret=%d, %s, %ld\n", ret,
strerror(errno), lseek(fd,0,SEEK_CUR));
close(fd);
}
exit(0);
}
You can reproduce by:
1:while true;do cat /proc/partitions > /dev/null ;done
2:./test
I reviewed the code and found:
>> static void *show_partition_start(struct seq_file *seqf, loff_t *pos)
>> {
>> static void *p;
>>
>> p = disk_seqf_start(seqf, pos);
>> if (!IS_ERR_OR_NULL(p) && !*pos)
>> seq_puts(seqf, "major minor #blocks name\n\n");
>> return p;
>> }
test cat /proc/partitions
p = disk_seqf_start()(Not NULL)
p = disk_seqf_start()(NULL because pos)
if (!IS_ERR_OR_NULL(p) && !*pos)
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional change. Just replaced the call to platform_device_del and
platform_device_put with platform_device_unregister.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
nop-usb-xceiv was polluting otg.h with its own
function prototypes. Move those prototypes to
a nop-usb-xceiv.h header.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Fixes endpoint starvation issue when more than one bulk QH is
multiplexed on the reserved bulk TX endpoint.
This patch sets the NAK timeout interval for such QHs, and when
a timeout triggers the next QH will be scheduled.
This scheme doesn't work for devices which are connected to a
high to full speed tree (transaction translator) as there is
no NAK timeout interrupt from the musb controller from such
devices.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Added a check in musb_{read | write}_fifo for zero byte length.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This is to reduce the overhead of dma programming for zero byte
transmit as same can be done using pio mode.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This is to reduce the overhead of dma programming for zero byte
transmit as same can be done using pio mode.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
In rxstate(), improper types are given to 'fifo_count' and 'len' variables, and
these variables are not used in accordance to their names (up to the certain
point), i.e. 'len' to hold the size of a packet in the RX FIFO, and 'fifo_count'
to hold a difference between 'request->length' and 'request->actual'...
Interchange the variables up to the point where their use starts to make sense
again.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The clock need to be enabled before the musb_core platform device is
created and registered.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
We are overwriting the resource->name to "mc" so that musb_core.c
can understand it but this is also changing the platform device's
resource->name as the "name" address remains same.
Fixing the same by changing the resource->name field of local
structure only.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to
SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert
SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX
and TI81XX as shown below
CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX
CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX
So updating the same at musb driver for AM33XX and TI81XX platforms.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
commit 68d3e66 (usb: dwc3: ep0: fix for possible early
delayed_status) added handling for early delayed status,
but the current code only works because so far delayed
status will always be on the IN direction.
This patch makes the code more robust by making sure that
we can handle all directions properly.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Due to the late Silicon limitation found, we are
now pre-starting DATA phase's TRBs. If, still, we
get XferNotReady(DATA) we will ignore it unless
we're getting it for the wrong direction.
In that case we must keep the error case handling
plus add a ENDTRANSFER command to forcefully end
the Data TRB we started previously, then continue
to SetStall and so on.
Signed-off-by: Felipe Balbi <balbi@ti.com>
We uncovered a limitation of this core WRT to the
Link Layer Compliance Suite's TD7.06.
On that test, host will start a GetDescriptor(DEVICE)
standard request, but it will do so only on the
SETUP phase, meaning there will *NOT* be any DATA or
STATUS phases.
The idea of the test is to verify robustness of the
IP WRT framing errors, so the test will send a
sequence of different SETUP_DPs each with a different
framing error and the Suite expects us to be able to
receive all SETUP_DPs with no timeouts.
This core, has the ability to tell us which phase the
host is expecting before we start it. Whenever we
receive a TP or DP when no transfers are cached on
the internal IP's caches, the IP will generate a
XferNotReady event with status informing us (in case
of physical ep0/ep1) if it's related to DATA or STATUS
phases - SETUP phase is expected to be prestarted.
Because we're always waiting for XferNotReady
events for DATA and STATUS phases, we will never
be able to know that the Host wants to start another
SETUP phase instead, which will render us "not
compliant" with TD7.06.
In order to "fix" the problem we must not rely
on XferNotReady events for the DATA phase and try
to always pre-start DATA transfers on physical
endpoints 0 and 1. If host goes back to SETUP phase
from DATA phase we will receive a XferComplete for
that phase with TRB's status set to SETUP_PENDING,
which is only useful for printing a debugging log as
the core expects us to still go through to the STATUS
phase, initiate a CONTROL_STATUS TRB just so it
completes right away and, only then, we go back to
the pending SETUP phase.
SNPS has decided to modify the programming model of
the core so that on-demand DATA phases will not be
supported anymore. Note that this limitation does not
affect 2-stage transfers, meaning that if TD7.06 would
start a 2-stage transfer instead of a 3-stage transfer,
we would receive a "fake" XferNotReady(STATUS) which
would complete right after being initiated with
SETUP_PENDING status.
Other endpoints are also not affected, so we can still
use on-demand transfers on Bulk/Isoc/Interrupt endpoints.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Databook doesn't say we should stall if we
get XferNotReady(STATUS) while we're expecting
something else.
Instead of stalling and restarting, tests have
proven that ignoring the event is far more
effective.
This problem has been caught while rewriting
ep0 handling in order we pass Link Layer TD7.6.
Signed-off-by: Felipe Balbi <balbi@ti.com>
We can return early from each if () branch
and split the special cases for clarity. While
at that also add a comment to the delayed_status
case.
Signed-off-by: Felipe Balbi <balbi@ti.com>