The Arizona class devices provide some GPIOs for use in the system. This
driver provides support for these via gpiolib. Currently interrupts are
not supported, normally the GPIOs are outputs only.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[Fold in WM5110 support patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remounting support will be removed in the future (see
feature-removal-schedule.txt). Discourage users from using it.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rob Landley <rob@landley.net>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
This patch introduces a flags variable to the Three-wire UART state
struct and converts the two existing bools in the struct into flags.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The configuration request/response messages contain a configuration
field which contains the sliding window size (amount of unacked reliable
packets that can be pending). This patch makes sure that we configure
the correct size (minimum of local and remote values) and use it when
determining whether to send new packets or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The implementation of h5_build_packet can be moved into
h5_prepare_pkt since all h5_prepare_pkt does is determine whether the
packet is reliable and then call h5_build_packet.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds on-demand wakeup request sending (and re-sendind) when
we are in low-power state. When the controller enters this state it will
send a sleep message after which the host is not allowed to send any
other packets until a wakeup request has been sent and the woken message
received as a response to it. The wakeup requests are re-sent
periodically until a woken message is received.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds tracking for the uninitialized, initialized and active
states for Three-wire UART. This is needed so we can handle periodic
sending of the Link Establishment messages before reaching active state
and so that we do not try to do any higher level HCI data transmission
before reaching active state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds very basic support for the sleep related messages. The
only thing the code does right now is send a wakeup message as soon as
receiving a sleep one, essentially preventing the controller from going
to sleep.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Remove unnecessary debug logs and add some to more centralized places.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch takes into use the delayed initialization feature that the
Bluetooth UART framework provides.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch retrieves and configures the vbus control gpio via
the device tree. The suspend/resume callbacks will be later
modified for vbus control.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes it possible to have UART drivers perform an internal
initialization before calling hci_register_dev. This allows moving a lot
of init code from user space (hciattach) to the kernel side, thereby
creating a more controlled/robust initialization process.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch cleans up and reduces indentation in the hci_uart_tty_close
function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
These patches implement the final mechanism necessary to really allow
us to go without the route cache in ipv4.
We need a place to have long-term storage of PMTU/redirect information
which is independent of the routes themselves, yet does not get us
back into a situation where we have to write to metrics or anything
like that.
For this we use an "next-hop exception" table in the FIB nexthops.
The one thing I desperately want to avoid is having to create clone
routes in the FIB trie for this purpose, because that is very
expensive. However, I'm willing to entertain such an idea later
if this current scheme proves to have downsides that the FIB trie
variant would not have.
In order to accomodate this any such scheme, we need to be able to
produce a full flow key at PMTU/redirect time. That required an
adjustment of the interface call-sites used to propagate these events.
For a PMTU/redirect with a fully specified socket, we pass that socket
and use it to produce the flow key.
Otherwise we use a passed in SKB to formulate the key. There are two
cases that need to be distinguished, ICMP message processing (in which
case the IP header is at skb->data) and output packet processing
(mostly tunnels, and in all such cases the IP header is at ip_hdr(skb)).
We also have to make the code able to handle the case where the dst
itself passed into the dst_ops->{update_pmtu,redirect} method is
invalidated. This matters for calls from sockets that have cached
that route. We provide a inet{,6} helper function for this purpose,
and edit SCTP specially since it caches routes at the transport rather
than socket level.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds basic support for parsing and sending Three-wire UART
Link Control packets.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch should complete the necessary code for sending reliable
Three-wire packets.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds convenience macros for reading Three-wire header values.
This will help make the code more readable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds initial packed encoding and sending support to the
Three-wire UART HCI transport driver.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds basic packet parsing to the Three-wire UART HCI driver
for packets received from the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch adds initial support for reliable packets along with the
necessary retransmission timer for the Three-wire UART HCI driver.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Do not send the uevent if driver_add_groups failed.
Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch support Maxim MAX77693 MUIC device by using EXTCON Subsystem
to handle various external connector. The extcon-max77693 use regmap
method for i2c communication and support irq domain instead of previous
method of irq base.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds basic state tracking and socket buffer handling to the
Three-wire UART (H5) HCI driver.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
These functions are only needed by NFS v4, so they can be moved into a
v4 specific file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS_V4
is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v2 and v3 shared a function for this, but v4 implemented something only
slightly different. Might as well share code whenever possible...
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
These functions are specific to NFS v4 and can be moved to nfs4client.c
to keep them out of the generic client.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
And split these functions out of the generic client into a v4 specific
file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v4 file functions into a new file that is only
compiled when CONFIG_NFS_V4 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the initial skeleton for Three-wire UART (H5) support
and hooks it up to the HCI UART framework.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
And split them out of the generic client into their own file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I want to initialize all of NFS v4 in a single function that will
eventually be used as the v4 module init function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFS v4 file inode operations are already already in nfs4proc.c, so
this patch just needs to move the directory operations to the same file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v3 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V3 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v2 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V2 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the ANSI/VITA 4.0-1995 (S2011) naming convention for the mezzanine or
daughter boards. They are called IP modules in the Standard.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue. An else statement was
not on the same line as the preceding if statement's
closing brace.
Signed-off-by: Erik Jones <erik@ejnode.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=tiQg
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-3.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO fixes for elements queued for 3.6 merge window.
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
class_create if succeeded returns a pointer to the struct class,
and if it fails, it returns a value enclosed by the pointer, which
can be read by using PTR_ERR.
Handle the error and return it.
result is for error checking of the alloc_chrdev_region, instead
ret can be used, and also if the alloc_chrdev_region fail,
we are still returning -ENODEV, use ret and the error path will
take care of returning of the ret.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit af061a644a ("IB/qib: Use RCU for qpn lookup") introduced sparse
warnings.
This patch corrects those issues.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since the function accepts just one bit, we can use the switch
construction instead of if/else if/...
Just a cosmetic change, there should be no functional changes.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ftrace log size is configurable via ramoops.ftrace_size
module option, and the log itself is available via
<pstore-mount>/ftrace-ramoops file.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't use pstore.buf directly, instead convert the code to write_buf callback
which passes a pointer to a buffer as an argument.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces 'func_ptrace' option, now available in
/sys/kernel/debug/tracing/options when function tracer
is selected.
The patch also adds some tiny code that calls back to pstore
to record the trace. The callback is no-op when PSTORE=n.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this support kernel can save function call chain log into a
persistent ram buffer that can be decoded and dumped after reboot
through pstore filesystem. It can be used to determine what function
was last called before a reset or panic.
We store the log in a binary format and then decode it at read time.
p.s.
Mostly the code comes from trace_persistent.c driver found in the
Android git tree, written by Colin Cross <ccross@android.com>
(according to sign-off history). I reworked the driver a little bit,
and ported it to pstore.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For function tracing we need to stop using pstore.buf directly, since
in a tracing callback we can't use spinlocks, and thus we can't safely
use the global buffer.
With write_buf callback, backends no longer need to access pstore.buf
directly, and thus we can pass any buffers (e.g. allocated on stack).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>