Commit graph

336,237 commits

Author SHA1 Message Date
Rafael J. Wysocki
44e1b142fe Merge branch 'renesas-board-common' into renesas-ap4evb
* renesas-board-common:
  regulator: extend the fixed dummy voltage regulator to accept voltage
  regulator: support multiple dummy fixed regulators
2012-06-30 22:40:25 +02:00
Guennadi Liakhovetski
6add9691cc ARM: mach-shmobile: add fixed voltage regulators to ag5evm
On ag5evm provide 1.8V, 2.8V, and 3.3V supplies for its SD/MMC-card
interfaces and a dummy regulator for the smsc911x driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 22:39:00 +02:00
Guennadi Liakhovetski
70ccb28dea ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel
Drivers for several devices on mackerel, including all SDHI instances, the
MMCIF controller and the SMSC9220 ethernet chip use regulators to control
power supply to their devices. MMC drivers need to be able to at least
retrieve voltage values from supplying regulators, whereas the smsc911x
driver only enables and disables chip power supplies without further looking
at them. This patch adds two fixed voltage regulators to describe 1.8V and
3.3V supplies on the board and a dummy regulator for SMSC9220.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 22:36:59 +02:00
Rafael J. Wysocki
7acc1e8775 Merge branch 'renesas-board-common' into renesas-mackerel
* renesas-board-common:
  regulator: extend the fixed dummy voltage regulator to accept voltage
  regulator: support multiple dummy fixed regulators
2012-06-30 22:31:58 +02:00
Rafael J. Wysocki
21503a86db Merge tag 'topic/fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into renesas-board-common
Several following board changes depend on this branch.
2012-06-30 22:23:24 +02:00
Linus Torvalds
c76760926a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management patches from Len Brown.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  acpi_pad: fix power_saving thread deadlock
  ACPI video: Still use ACPI backlight control if _DOS doesn't exist
  ACPI, APEI, Avoid too much error reporting in runtime
  ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding
  ACPI: Remove one board specific WARN when ignoring timer overriding
  ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases
  ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI
  ACPI sysfs.c strlen fix
2012-06-30 11:11:58 -07:00
Mauro Carvalho Chehab
61a96113de [media] tuner-xc2028: use request_firmware_nowait()
Change the firmware logic to use request_firmware_nowait(), and
to preserve the loaded firmwares in memory, to reduce the risk
of troubles with buggy userspace apps.

With this change, while the firmware is being loaded, the driver
will return -EAGAIN to any calls. If, for some reason, firmware
failed to be loaded from userspace, it will return -ENODEV.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-30 14:26:06 -03:00
Linus Torvalds
21f27291f5 Driver Core fixes for 3.5-rc5
Here is a number of printk() fixes, specifically a few reported by the
 crazy blog program that ships in SUSE releases (that's "boot log" and
 not "web log", it predates the general "blog" terminology by many
 years), and the restoration of the continuation line functionality
 reported by Stephen and others.  Yes, the changes seem a bit big this
 late in the cycle, but I've been beating on them for a while now, and
 Stephen has even optimized it a bit, so all looks good to me.
 
 The other change in here is a Documentation update for the stable kernel
 rules describing how some distro patches should be backported, to
 hopefully drive a bit more response from the distros to the stable
 kernel releases.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk/uhJEACgkQMUfUDdst+ymL0QCfTjWJrdf+ooJ6Bx/NNgOGxYip
 Ss0AnRrCNkfgmMcdNMn/7CIbHlaTj+S+
 =M5Rg
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver Core fixes from Greg Kroah-Hartman:
 "Here is a number of printk() fixes, specifically a few reported by the
  crazy blog program that ships in SUSE releases (that's "boot log" and
  not "web log", it predates the general "blog" terminology by many
  years), and the restoration of the continuation line functionality
  reported by Stephen and others.  Yes, the changes seem a bit big this
  late in the cycle, but I've been beating on them for a while now, and
  Stephen has even optimized it a bit, so all looks good to me.

  The other change in here is a Documentation update for the stable
  kernel rules describing how some distro patches should be backported,
  to hopefully drive a bit more response from the distros to the stable
  kernel releases.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  printk: Optimize if statement logic where newline exists
  printk: flush continuation lines immediately to console
  syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ
  Revert "printk: return -EINVAL if the message len is bigger than the buf size"
  printk: fix regression in SYSLOG_ACTION_CLEAR
  stable: Allow merging of backports for serious user-visible performance issues
2012-06-30 10:11:24 -07:00
Andrei Emeltchenko
ce2be9acff Bluetooth: Do not auto off AMP controller
Since AMP controller is not managed by user space do not shut it down.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:35:49 -03:00
Andrei Emeltchenko
74ad8fdaef Bluetooth: bluecard_cs: Shorten scope for iobase
Shortening scope shall silence some warnings reported by Geert
Uytterhoeven:

...
drivers/bluetooth/bluecard_cs.c: warning: unused variable 'iobase'
	[-Wunused-variable]
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:33:06 -03:00
Andrei Emeltchenko
d300fa9b14 Bluetooth: Route traffic only through BR/EDR controller
If AMP controller is first in the list then Bluetooth traffic might
be routed through it (if source is not specified). The patch
prevents this case and also checks that source is BR/EDR.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:15:32 -03:00
Andrei Emeltchenko
510df2515f Bluetooth: Fix warning: using int as NULL pointer
Fix for warnings below:

...
drivers/bluetooth/bt3c_cs.c:667:20: warning: Using plain integer
	as NULL pointer
drivers/bluetooth/btuart_cs.c:596:20: warning: Using plain integer
	as NULL pointer
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:07:14 -03:00
Devendra Naga
46afededca Bluetooth: cleanup dtl1_config
Improve the error handling of dtl1_config()

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 11:44:36 -03:00
Andrei Emeltchenko
38b3fef173 Bluetooth: Improve debugging messages for hci_conn
Improve debugging of hci_conn objects by: adding print to hci_conn
refcounting, adding object spcifier when missing, change conn to hcon
since conn is heavily used for l2cap_conn objects and this is misleading.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 11:41:24 -03:00
Kuninori Morimoto
6f00294fc0 ARM: shmobile: use common extra gpio functions on g4evm
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.

But these functions should be replaced by correct
gpio function in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:38:55 +02:00
Kuninori Morimoto
6a6196af46 ARM: shmobile: use common extra gpio functions on ap4evb
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.

But these functions should be replaced by correct
gpio function in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:36:37 +02:00
Kuninori Morimoto
c721e0cb9d ARM: shmobile: use common extra gpio functions on Mackerel
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.

But these functions should be replaced by correct
gpio function in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:33:44 +02:00
Kuninori Morimoto
a1ca8f4990 ARM: shmobile: kzm9g: enable DMAEngine on MMCIF
It is possible to reduce CPU load if MMCIF used DMAEngine.
This patch enabled it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:30:32 +02:00
Kuninori Morimoto
76b8032917 ARM: shmobile: kzm9g: enable DMAEngine on FSI
It is possible to reduce CPU load if FSI playback used DMAEngine.
This patch enabled it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:30:31 +02:00
Kuninori Morimoto
425d6940b9 ARM: shmobile: kzm9g: enable MicroSD
This patch enable MicroSD on CN20

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:30:31 +02:00
Kuninori Morimoto
77bcefd90c ARM: shmobile: kzm9g: enable USB function
This patch enable USB function on CN17

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:30:30 +02:00
Rafael J. Wysocki
0fcc6d5502 Merge branch 'renesas-sh73a0' into renesas-kzm9g
* renesas-sh73a0:
  ARM: shmobile: use common DMAEngine definitions on sh73a0
  ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
  ARM: shmobile: sh73a0: add USB clock support
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions
2012-06-30 15:30:16 +02:00
Kuninori Morimoto
a01366b4b5 ARM: shmobile: use common extra gpio functions on armadillo800eva
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.

But these functions should be replaced by correct
gpio function in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:53 +02:00
Kuninori Morimoto
f7e566fa26 ARM: shmobile: armadillo800eva: enable DMAEngine on USB
It is possible to reduce CPU load if USB used DMAEngine.
This patch enabled it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:53 +02:00
Kuninori Morimoto
95798e350d ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI
It is possible to reduce CPU load if SDHI used DMAEngine.
This patch enabled it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:53 +02:00
Kuninori Morimoto
dc7dd5841f ARM: shmobile: armadillo800eva: enable DMAEngine on FSI
It is possible to reduce CPU load if FSI playback used DMAEngine.
This patch enabled it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:52 +02:00
Kuninori Morimoto
0676c05e57 ARM: shmobile: armadillo800eva: enable FSI-HDMI sound
This patch enable HDMI sound support on CON3

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:52 +02:00
Kuninori Morimoto
5389bf719f ARM: shmobile: armadillo800eva: enable FSI-WM8978 sound
This patch enable sound support on CON11

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:24:51 +02:00
Rafael J. Wysocki
e01fa821b8 Merge branch 'renesas-r8a7740' into renesas-armadillo
* renesas-r8a7740:
  ARM: shmobile: use common DMAEngine definitions on r8a7740
  ARM: shmobile: r8a7740: add DMAEngine support for USB
  ARM: shmobile: r8a7740: add DMAEngine support for SDHI
  ARM: shmobile: r8a7740: add DMAEngine support for FSI
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions
2012-06-30 15:24:35 +02:00
Kuninori Morimoto
c317fc5940 ARM: shmobile: use common DMAEngine definitions on sh7372
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.

It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:16:46 +02:00
Rafael J. Wysocki
13bb340d63 Merge branch 'renesas-soc-core' into renesas-sh7372
* renesas-soc-core:
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions
2012-06-30 15:16:35 +02:00
Kuninori Morimoto
6088b42270 ARM: shmobile: use common DMAEngine definitions on sh73a0
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.

It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:13:49 +02:00
Kuninori Morimoto
832290b25e ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
Current shdmac can support MPDMAC (= sound DMA) on sh73a0.
This support reduce CPU load when sound was playback.

On v2.0 manual, MPDMAC MID/RID number were wrong.
This patch is using the number which seems correct.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:13:49 +02:00
Kuninori Morimoto
12a7cfef56 ARM: shmobile: sh73a0: add USB clock support
It is required from renesas_usbhs driver.
This patch is based on v2.0 manual.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:13:48 +02:00
Rafael J. Wysocki
ddc0c5eb64 Merge branch 'renesas-soc-core' into renesas-sh73a0
* renesas-soc-core:
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions
2012-06-30 15:13:34 +02:00
Kuninori Morimoto
d7de938f3d ARM: shmobile: use common DMAEngine definitions on r8a7740
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.

It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:07:31 +02:00
Kuninori Morimoto
dbf382e556 ARM: shmobile: r8a7740: add DMAEngine support for USB
Current shdmac can support USB DMAC on r8a7740.
This support reduce CPU duty when USB access.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:07:31 +02:00
Kuninori Morimoto
cb76eb812e ARM: shmobile: r8a7740: add DMAEngine support for SDHI
Current shdmac can support SDHI DMAC on r8a7740.
This support reduce CPU duty when SDHI access.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:07:30 +02:00
Kuninori Morimoto
643c3307bb ARM: shmobile: r8a7740: add DMAEngine support for FSI
Current shdmac can support FSI DMAC on r8a7740.
This support reduce CPU duty when sound was playback.

This patch is based on v1.0 manual

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:07:30 +02:00
Rafael J. Wysocki
b379c48a31 Merge branch 'renesas-soc-core' into renesas-r8a7740
* renesas-soc-core:
  ARM: shmobile: add common DMAEngine definitions
  ARM: shmobile: add common extra gpio functions
2012-06-30 15:04:01 +02:00
Kuninori Morimoto
5ca1d44f6a ARM: shmobile: add common DMAEngine definitions
Current shmobile have DMAEngine specific settings on each CPU code,
but SH-ARM DMAC use same value.

This patch adds new dma-register.h header to share definitions
and reduce a waste of code on SH-ARM architecture.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:03:16 +02:00
Kuninori Morimoto
4f3d7f65e9 ARM: shmobile: add common extra gpio functions
Current gpio frame work doesn't have the method to control
just pull up/down/free, but some SH-ARM boards need such kind of operation.
This patch adds common extra gpio functions for SH-ARM.

But these functions should be replaced by correct
gpio function in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30 15:03:16 +02:00
Jonathan Cameron
cf82cb8128 IIO: Add a modifier for x^2+y^2+z^2
There will probably be a number of such modifiers eventually but
this one is used in the adis16240 accelerometer driver.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30 10:15:28 +01:00
Jonathan Cameron
f699d10202 staging:iio:accel:adis16204 support the rss channel via chan spec.
Reduces code and makes this channel available within the kernel.
Note that it is not added to the buffer, thus maintaining the
previous functionality of this driver.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
2012-06-30 10:15:25 +01:00
Jonathan Cameron
8f5879b20b IIO: Add a modifier for sqrt(x^2+y^2)
There will probably be a number of such modifiers eventually but
this one is used in the adis16204 accelerometer driver.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30 10:15:22 +01:00
Jonathan Cameron
07c7f79ee1 staging:iio:imu:adis16400 drop sysfs interface for manual device reset.
There is no reason for userspace to do this, so lets
drop this abi.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
2012-06-30 10:15:20 +01:00
Jonathan Cameron
15a1a7530c staging:iio:gyro:adis16260 drop sysfs interface for manual device reset.
There is no reason for userspace to do this, so lets
drop this abi.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
2012-06-30 10:15:17 +01:00
Jonathan Cameron
13d947db1c staging:iio:accel drop sysfs interface for resetting devices.
There is no reason why userspace should want to do this manually.
Hence, lets drop this abi.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
2012-06-30 10:15:14 +01:00
Jonathan Cameron
314be14bb8 iio: Rename _st_ functions to loose the bit that meant the staging version.
These were originally introduced when the plan was to have parallel
IIO cores in and out of staging with a slow move between them.
Now we have reached the point where the whole core has moved,
they need clearing up!

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30 10:15:12 +01:00
Lars-Peter Clausen
6a17a0768f iio:dac:ad5064: Add support for the ad5629r and ad5669r
The ad5629r and ad5669r are the I2C variants of the ad5628 and ad5668. Since the
ad5064 driver currently only supports SPI based devices the major part of this
patch focuses on adding support for I2C based devices. Adding support for the
actual parts boils down to adding entries for them to the device id table.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30 10:15:09 +01:00