Commit graph

336,237 commits

Author SHA1 Message Date
Alex Elder
6740a845b2 libceph: make ceph_con_revoke() a msg operation
ceph_con_revoke() is passed both a message and a ceph connection.
Now that any message associated with a connection holds a pointer
to that connection, there's no need to provide the connection when
revoking a message.

This has the added benefit of precluding the possibility of the
providing the wrong connection pointer.  If the message's connection
pointer is null, it is not being tracked by any connection, so
revoking it is a no-op.  This is supported as a convenience for
upper layers, so they can revoke a message that is not actually
"in flight."

Rename the function ceph_msg_revoke() to reflect that it is really
an operation on a message, not a connection.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
92ce034b5a libceph: have messages take a connection reference
There are essentially two types of ceph messages: incoming and
outgoing.  Outgoing messages are always allocated via ceph_msg_new(),
and at the time of their allocation they are not associated with any
particular connection.  Incoming messages are always allocated via
ceph_con_in_msg_alloc(), and they are initially associated with the
connection from which incoming data will be placed into the message.

When an outgoing message gets sent, it becomes associated with a
connection and remains that way until the message is successfully
sent.  The association of an incoming message goes away at the point
it is sent to an upper layer via a con->ops->dispatch method.

This patch implements reference counting for all ceph messages, such
that every message holds a reference (and a pointer) to a connection
if and only if it is associated with that connection (as described
above).


For background, here is an explanation of the ceph message
lifecycle, emphasizing when an association exists between a message
and a connection.

Outgoing Messages
An outgoing message is "owned" by its allocator, from the time it is
allocated in ceph_msg_new() up to the point it gets queued for
sending in ceph_con_send().  Prior to that point the message's
msg->con pointer is null; at the point it is queued for sending its
message pointer is assigned to refer to the connection.  At that
time the message is inserted into a connection's out_queue list.

When a message on the out_queue list has been sent to the socket
layer to be put on the wire, it is transferred out of that list and
into the connection's out_sent list.  At that point it is still owned
by the connection, and will remain so until an acknowledgement is
received from the recipient that indicates the message was
successfully transferred.  When such an acknowledgement is received
(in process_ack()), the message is removed from its list (in
ceph_msg_remove()), at which point it is no longer associated with
the connection.

So basically, any time a message is on one of a connection's lists,
it is associated with that connection.  Reference counting outgoing
messages can thus be done at the points a message is added to the
out_queue (in ceph_con_send()) and the point it is removed from
either its two lists (in ceph_msg_remove())--at which point its
connection pointer becomes null.

Incoming Messages
When an incoming message on a connection is getting read (in
read_partial_message()) and there is no message in con->in_msg,
a new one is allocated using ceph_con_in_msg_alloc().  At that
point the message is associated with the connection.  Once that
message has been completely and successfully read, it is passed to
upper layer code using the connection's con->ops->dispatch method.
At that point the association between the message and the connection
no longer exists.

Reference counting of connections for incoming messages can be done
by taking a reference to the connection when the message gets
allocated, and releasing that reference when it gets handed off
using the dispatch method.

We should never fail to get a connection reference for a
message--the since the caller should already hold one.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
38941f8031 libceph: have messages point to their connection
When a ceph message is queued for sending it is placed on a list of
pending messages (ceph_connection->out_queue).  When they are
actually sent over the wire, they are moved from that list to
another (ceph_connection->out_sent).  When acknowledgement for the
message is received, it is removed from the sent messages list.

During that entire time the message is "in the possession" of a
single ceph connection.  Keep track of that connection in the
message.  This will be used in the next patch (and is a helpful
bit of information for debugging anyway).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
1c20f2d267 libceph: tweak ceph_alloc_msg()
The function ceph_alloc_msg() is only used to allocate a message
that will be assigned to a connection's in_msg pointer.  Rename the
function so this implied usage is more clear.

In addition, make that assignment inside the function (again, since
that's precisely what it's intended to be used for).  This allows us
to return what is now provided via the passed-in address of a "skip"
variable.  The return type is now Boolean to be explicit that there
are only two possible outcomes.

Make sure the result of an ->alloc_msg method call always sets the
value of *skip properly.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
1bfd89f4e6 libceph: fully initialize connection in con_init()
Move the initialization of a ceph connection's private pointer,
operations vector pointer, and peer name information into
ceph_con_init().  Rearrange the arguments so the connection pointer
is first.  Hide the byte-swapping of the peer entity number inside
ceph_con_init()

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
20581c1faf libceph: init monitor connection when opening
Hold off initializing a monitor client's connection until just
before it gets opened for use.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Sage Weil
ec87ef4309 libceph: drop connection refcounting for mon_client
All references to the embedded ceph_connection come from the msgr
workqueue, which is drained prior to mon_client destruction.  That
means we can ignore con refcounting entirely.

Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
67130934fb libceph: embed ceph connection structure in mon_client
A monitor client has a pointer to a ceph connection structure in it.
This is the only one of the three ceph client types that do it this
way; the OSD and MDS clients embed the connection into their main
structures.  There is always exactly one ceph connection for a
monitor client, so there is no need to allocate it separate from the
monitor client structure.

So switch the ceph_mon_client structure to embed its
ceph_connection structure.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Sage Weil
0d47766f14 libceph: use con get/put ops from osd_client
There were a few direct calls to ceph_con_{get,put}() instead of the con
ops from osd_client.c.  This is a bug since those ops aren't defined to
be ceph_con_get/put.

This breaks refcounting on the ceph_osd structs that contain the
ceph_connections, and could lead to all manner of strangeness.

The purpose of the ->get and ->put methods in a ceph connection are
to allow the connection to indicate it has a reference to something
external to the messaging system, *not* to indicate something
external has a reference to the connection.

[elder@inktank.com: added that last sentence]

Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:54 -05:00
Alex Elder
ab8cb34a4b libceph: osd_client: don't drop reply reference too early
In ceph_osdc_release_request(), a reference to the r_reply message
is dropped.  But just after that, that same message is revoked if it
was in use to receive an incoming reply.  Reorder these so we are
sure we hold a reference until we're actually done with the message.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-06-06 09:23:54 -05:00
Dan Carpenter
895cfcc810 rbd: endian bug in rbd_req_cb()
Sparse complains about this because:
drivers/block/rbd.c:996:20: warning: cast to restricted __le32
drivers/block/rbd.c:996:20: warning: cast from restricted __le16

These are set in osd_req_encode_op() and they are le16.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:54 -05:00
Yan, Zheng
f9f9a19044 rbd: Fix ceph_snap_context size calculation
ceph_snap_context->snaps is an u64 array

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:53 -05:00
Marek Vasut
a3e545e9ab mmc: mxs-mmc: Move of_match_table out of CONFIG_PM
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 10:16:40 -04:00
Austin Hendrix
4db703ead4 HID: multitouch: add support for Novatek touchscreen
Add support for a Novatek touchscreen panel as a generic HID multitouch
panel.

Signed-off-by: Austin Hendrix <ahendrix@willowgarage.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-06 16:00:39 +02:00
Pratyush Anand
7e39b817ee usb: dwc3: Correct DWC3_DCTL_HIRD_THRES definition
The definition of DWC3_DCTL_HIRD_THRES macro is
completely wrong. It will only work for when we
want to read the register's contents for that bitfield.

Change the macro so that it can be used to writing to
the register, and when we need to read, we can add
extra right shift of 24 bits.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>

[ balbi@ti.com: add a commit log ]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 16:56:10 +03:00
Heiko Stübner
81ec1daa11 mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq
Fix a boot regression in existing kernels causing:

genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq XXX

caused by 1c6c6952 (genirq: Reject bogus threaded irq requests).

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:53:22 -04:00
Jaehoon Chung
85e727edb9 mmc: core: return an error on suspend if mmc_deselect_cards fails
When mmc_host is not spi mode, mmc/sd is doing mmc_deselect_cards().
mmc_deselect_cards could be returned error.
If returned error, we can know something wrong when enter suspend.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:49:47 -04:00
Tony Lindgren
ebbe6f889f mmc: omap: Fix broken reg_shift initialization
Commit fa550189 (mmc: core: Prevent eMMC VCC supply to be cut from late init)
slightly affected timings for how things are done for the omap MMC driver
causing the MMC cards not getting detected any longer.

Turns out this was caused by buggy reg_shift initialization in the omap
MMC driver that was happening after mmc_add_host() was being called.

Fix this by initializing reg_shift before mmc_add_host() is called.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:47:49 -04:00
Tony Lindgren
3caf41406d mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails
Commit b01a4f1c (mmc: omap: convert to per instance workqueue) initializes
the workqueue too late causing the following:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0    Not tainted  (3.4.0-08218-gb48b2c3 #158)
PC is at __queue_work+0x8/0x46c
LR is at queue_work_on+0x38/0x40
pc : [<c005bb4c>]    lr : [<c005c00c>]    psr: 60000193
sp : c0691e1c  ip : 00000000  fp : c07374ac
r10: c7aae400  r9 : c0395700  r8 : 00000100
r7 : c0691e70  r6 : 00000000  r5 : 00000000  r4 : c7aae440
r3 : 00000001  r2 : c7aae440  r1 : 00000000  r0 : 00000000
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 80004000  DAC: 00000017
Process swapper/0 (pid: 0, stack limit = 0xc06902f8)
Stack: (0xc0691e1c to 0xc0692000)

Fix this by initializing the workqueue before mmc_omap_remove_slot()
get called. Tested on n770, looks like n800 at least still has some
other issue with MMC.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:45:50 -04:00
Tony Lindgren
4f837791d9 mmc: omap: Fix a section warning regression
Commit b6e0703b (mmc: omap: make it behave well as a module) made some
__devinit changes but missed one function causing a section warning:

WARNING: vmlinux.o(.devinit.text+0x8604): Section mismatch in reference
from the function mmc_omap_probe)

The function __devinit mmc_omap_probe() references a function
__init mmc_omap_new_slot().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:44:09 -04:00
Seungwon Jeon
e419990b5e mmc: dw_mmc: correct the calculation for CLKDIV
In case of "host->bus_hz < slot->clock", divider value is
miscalculated. And clock divider register value is multiple of 2. If
calculated divider value is odd number, result can be over-clocking.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:38:51 -04:00
Seungwon Jeon
fda5f73686 mmc: dw_mmc: fix incorrect setting of host->data of NULL
Setting host->data to NULL is incorrect sequence in
dw_mci_command_complete. This early setting makes the skip of
dma_unmap_sg in dw_mci_dma_cleanup.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:37:03 -04:00
Seungwon Jeon
141a712a4e mmc: dw_mmc: fix the IDMAC sw reset
IDMAC may not be cleaned in driver probe if it has been already used in
boot time. So IDMAC needs sw reset newly. And DMA interface reset
precedes the internal DMAC reset. Additionally SDMMC_IDMAC_SWRESET is
replaced with magic code.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:36:21 -04:00
Seungwon Jeon
eed6c63cef mmc: dw_mmc: fix the transmission handling in IDMAC
DTO interrupt can be later than transmit interrupt(IDMAC) in case of
write. Current handling of IDMAC interrupt sets EVENT_DATA_COMPLETE as
well as EVENT_XFER_COMPLETE regardless of DTO rising. This makes the
current request finish in tasklet and permits the next request even
though current data transfer is still in progress. As a result, sequence
is broken and lock-up happens. Setting EVENT_DATA_COMPLETE is not proper
after IDMAC interrupt. It should be taken after DTO interrupt is
generated.

Reported-by: Dmitry Shmidt <dimitrysh@android.com>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Hyeonsu Kim <hyeonsu.kim@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:35:47 -04:00
Geert Uytterhoeven
d8ce7263e1 m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-06 15:31:28 +02:00
Yong Ding
2a0fe914a3 mmc: sdio: fix setting card data bus width as 4-bit
SDIO_CCCR_IF[1:0] in SDIO card is used for card data bus width
setting as below:

     00b: 1-bit bus
     01b: Reserved
     10b: 4-bit bus
     11b: 8-bit bus (only for embedded SDIO)

And sdio_enable_wide is for setting data bus width as 4-bit.
But currently, it first reads the register, second OR' 1b with
SDIO_CCCR_IF[1], and then writes it back.

As we can see, this is based on such assumption that the
SDIO_CCCR_IF[0] is always 0. Apparently, this is not right.

Signed-off-by: Yong Ding <yongd@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 09:22:53 -04:00
Nicolas Ferre
693e5e2025 mmc: atmel-mci: fix burst/chunk size modification
The use of DMA slave config operation requires that the burst size
(aka chunk size) is specified through this interface.
Modify atmel-mci slave driver to use this specification on its side.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-06 08:52:12 -04:00
Avi Kivity
25e531a988 Merge branch 'for-upstream' of git://github.com/agraf/linux-2.6 into next
Alex says:

"Changes this time include:

  - Generalize KVM_GUEST support to overall ePAPR code
  - Fix reset for Book3S HV
  - Fix machine check deferral when CONFIG_KVM_GUEST=y
  - Add support for BookE register DECAR"

* 'for-upstream' of git://github.com/agraf/linux-2.6:
  KVM: PPC: Not optimizing MSR_CE and MSR_ME with paravirt.
  KVM: PPC: booke: Added DECAR support
  KVM: PPC: Book3S HV: Make the guest hash table size configurable
  KVM: PPC: Factor out guest epapr initialization

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-06 15:31:34 +03:00
Michael S. Tsirkin
79f702a6d1 KVM: disable uninitialized var warning
I see this in 3.5-rc1:

arch/x86/kvm/mmu.c: In function ‘kvm_test_age_rmapp’:
arch/x86/kvm/mmu.c:1271: warning: ‘iter.desc’ may be used uninitialized in this function

The line in question was introduced by commit
1e3f42f03c

 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
                              unsigned long data)
 {
-       u64 *spte;
+       u64 *sptep;
+       struct rmap_iterator iter;   <- line 1271
        int young = 0;

        /*

The reason I think is that the compiler assumes that
the rmap value could be 0, so

static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator
*iter)
{
        if (!rmap)
                return NULL;

        if (!(rmap & 1)) {
                iter->desc = NULL;
                return (u64 *)rmap;
        }

        iter->desc = (struct pte_list_desc *)(rmap & ~1ul);
        iter->pos = 0;
        return iter->desc->sptes[iter->pos];
}

will not initialize iter.desc, but the compiler isn't
smart enough to see that

        for (sptep = rmap_get_first(*rmapp, &iter); sptep;
             sptep = rmap_get_next(&iter)) {

will immediately exit in this case.
I checked by adding
        if (!*rmapp)
                goto out;
on top which is clearly equivalent but disables the warning.

This patch uses uninitialized_var to disable the warning without
increasing code size.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-06 15:26:12 +03:00
Christoffer Dall
a737f256bf KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers
Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.

Functions introduced or modified are:
 - kvm_err(fmt, ...)
 - kvm_info(fmt, ...)
 - kvm_debug(fmt, ...)
 - kvm_pr_unimpl(fmt, ...)
 - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)

Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-06 15:24:00 +03:00
Thomas Gleixner
e40468a548 timers: Improve get_next_timer_interrupt()
Gilad reported at

 http://lkml.kernel.org/r/1336056962-10465-2-git-send-email-gilad@benyossef.com

"Current timer code fails to correctly return a value meaning that
 there is no future timer event, with the result that the timer keeps
 getting re-armed in HZ one shot mode even when we could turn it off,
 generating unneeded interrupts.

 What is happening is that when __next_timer_interrupt() wishes
 to return a value that signifies "there is no future timer
 event", it returns (base->timer_jiffies + NEXT_TIMER_MAX_DELTA).

 However, the code in tick_nohz_stop_sched_tick(), which called
 __next_timer_interrupt() via get_next_timer_interrupt(),
 compares the return value to (last_jiffies + NEXT_TIMER_MAX_DELTA)
 to see if the timer needs to be re-armed.

 base->timer_jiffies != last_jiffies and so tick_nohz_stop_sched_tick()
 interperts the return value as indication that there is a distant
 future event 12 days from now and programs the timer to fire next
 after KTIME_MAX nsecs instead of avoiding to arm it. This ends up
 causing a needless interrupt once every KTIME_MAX nsecs."

Fix this by using the new active timer accounting. This avoids scans
when no active timer is enqueued completely, so we don't have to rely
on base->timer_next and base->timer_jiffies anymore.

Reported-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.317535385@linutronix.de
2012-06-06 13:49:02 +02:00
Thomas Gleixner
99d5f3aac6 timers: Add accounting of non deferrable timers
The code in get_next_timer_interrupt() is suboptimal as it has to run
through the cascade to find the next expiring timer. On a completely
idle core we should only do that when there is an active timer
enqueued and base->next_timer does not give us a fast answer.

Add accounting of the active timers to the now consolidated
attach/detach code. I deliberately avoided sanity checks because the
code is fully symetric and any fiddling with timers w/o using the API
functions will lead to cute explosions anyway. ulong is big enough
even on 32bit and if we really run into the situation to have more
than 1<<32 timers enqueued there, then we are definitely not in a
state to go idle and run through that code.

This allows us to fix another shortcoming of get_next_timer_interrupt().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.236377028@linutronix.de
2012-06-06 13:49:01 +02:00
Thomas Gleixner
facbb4a7ef timers: Consolidate base->next_timer update
Another bunch of mindlessly copied code. All callers of
internal_add_timer() except the recascading code updates
base->next_timer.

Move this into internal_add_timer() and let the cascading code call
__internal_add_timer().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.189946224@linutronix.de
2012-06-06 13:49:01 +02:00
Thomas Gleixner
ec44bc7acc timers: Create detach_if_pending() and use it
Most callers of detach_timer() have the same pattern around
them. Check whether the timer is pending and eventually updating
base->next_timer.

Create detach_if_pending() and replace the duplicated code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.131246037@linutronix.de
2012-06-06 13:49:01 +02:00
Johannes Berg
b1abedada3 iwlwifi: remove extern opmode ops declarations
There's no need to declare the opmode ops
as extern since they're now dynamically
registered.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:26:00 +02:00
Johannes Berg
1280d428ad iwlwifi: move RF config into NIC config
Since the RF config is done for all devices,
there's no need to keep a separate function
that is called for all devices, move it into
the general NIC config function.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:25:17 +02:00
Johannes Berg
12b78246aa iwlwifi: configure PHY version for 1000 series
We should also configure the PHY version in the
CSR_HW_IF_CONFIG_REG register for 1000 series
devices, not just for the other devices.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:24:58 +02:00
Paul Bolle
6de4902ee8 iwlwifi: fix typo 'IWL_WATCHHDOG_DISABLED'
Commit 7c5ba4a830 ("iwlwifi: move queue
watchdog into transport") introduced the named constant
'IWL_WATCHHDOG_DISABLED'. Rename it to 'IWL_WATCHDOG_DISABLED'.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:24:36 +02:00
Johannes Berg
26a7ca9a71 iwlwifi: refactor EEPROM reading/parsing
The EEPROM reading/parsing code is all mixed in
the driver today, and the EEPROM is parsed only
when we access data from it. This is problematic
because the NVM needs to be parsed and that is
independent of reading it. Also, the NVM format
for new devices will be different and probably
require a new parser.

Therefore refactor the reading and parsing and
create two independent components. Reading the
EEPROM requires direct hardware accesses and
therefore access to the transport, but parsing
is independent and can be done on an NVM blob.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:24:19 +02:00
Emmanuel Grumbach
08838cdeca iwlwifi: configure the SKU in the HW
This was missing. Fix the mask of the REV_TYPE on the way.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:22:30 +02:00
Emmanuel Grumbach
7b6a2be9e4 iwlwifi: fix rf configuration
Johannes noticed this was completely messed up.
We got confused between masks and bit position.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:22:11 +02:00
Johannes Berg
2baa2e57a9 iwlwifi: add iwl_set_bits_mask
In a few cases we need to set a value in
a certain mask inside a register, add the
function iwl_set_bits_mask() to make such
code easy.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:52 +02:00
Emmanuel Grumbach
59c647b626 iwlwifi: allocate Tx cmd pool per device
Different transports will have different needs: New tranports
need headroom for their own use before the Tx cmd. So allocate
the Tx cmd pool in the transport and give it a unique name
based on dev_name.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:22 +02:00
Emmanuel Grumbach
cde5b48700 iwlwifi: update mask value for SCD queue config
Although we don't use bit 24, this bit is valid, but bit 23
is not. Update the mask accordingly.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:21 +02:00
Emmanuel Grumbach
4beaf6c2f8 iwlwifi: s/txq_setup/txq_enable
We need to be able to enable / disable Tx queues in HW
dynamically. So this function is no longer related to AGG
only. It can do the job for any queue, even AC ones. Change
the name to better reflect its role.

Also use the new function to configure the AC / CMD queues
in tx_start.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:20 +02:00
Emmanuel Grumbach
d0624be65a iwlwifi: s/txq_agg_disable/txq_disable
We need to be able to enable / disable Tx queues in HW
dynamically. So this function is no longer related to AGG
only. It can do the job for any queue, even AC ones. Change
the name to better reflect its role.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:19 +02:00
Emmanuel Grumbach
559b1a257d iwlwifi: use iwl_trans_set_wr_ptrs to init the queues
This functions does the job so use it instead of duplicating
the code.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:19 +02:00
Emmanuel Grumbach
fc24861531 iwlwifi: first config the SCD queues, then activate them
The DMA channels of the FH should be activated after the
configuration of the SCD queues too.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:18 +02:00
Emmanuel Grumbach
588d932044 iwlwifi: SCD_INT_MSK is obsolete - don't update it
The scheduler can issue an interrupt when moving the read
pointer. To get this interrupt, the driver needs to
configure what queue can issue an interrupt when its read
pointer moves in the scheduler: this is the SCD_INT_MSK.
The driver also needs to enable the interrupt in
CSR_INT_MASK (bit CSR_INT_BIT_SCD).

Since we don't enable the scheduler interrupt in
CSR_INT_MASK, there is no point in requesting an interrupt
from the scheduler: it will be masked anyway. So don't
configure the scheduler to issue interrupts at all.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:17 +02:00
Johannes Berg
d370493f9b iwlwifi: move ht40 bitmap into config
There's no need to dynamically fill the HT40
band bitmap as it's a device parameter, just
put it into the HT configuration.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06 13:21:16 +02:00