[ Upstream commit c2e6a872bd ]
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240429100437.3487432-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af0cb3fa3f ]
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1e197a665 ]
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
...
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86d43e2bf9 ]
Although the code is correct, the following line
copy_from_sockptr(&req_u.req, optval, len));
triggers this warning :
memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)
Refactor the code to be more explicit.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4b4647add7 upstream.
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293
RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000
RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0
RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3
R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840
R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870
FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070
RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot+07a2e4a1a57118ef7355@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=07a2e4a1a57118ef7355
Fixes: aadb2bb83f ("sock_map: Fix a potential use-after-free in sock_map_close()")
Fixes: 5b4a79ba65 ("bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240524144702.1178377-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40eec1795c upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a09788c1a upstream.
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8031b58c3a upstream.
This is strictly related to commit fb7a0d3348 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <martineau@kernel.org>
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14a20e5b4a ]
The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.
A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.
Fix the problem by switching the order of the two operations.
Fixes: 4990509f19 ("[NETNS][IPV6]: Make sysctls route per namespace.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7aaa6b82 ]
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbb (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd8 (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ab9da85b ]
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6 ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c695439d19 ]
The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.
Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.
Fixes: 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806a5198c0 ]
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37fe4255a ]
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b536948e8 ]
Once sk->sk_state is changed to TCP_LISTEN, it never changes.
unix_accept() takes the advantage and reads sk->sk_state without
holding unix_state_lock().
Let's use READ_ONCE() there.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efaf24e30e ]
While dumping sockets via UNIX_DIAG, we do not hold unix_state_lock().
Let's use READ_ONCE() to read sk->sk_shutdown.
Fixes: e4e541a848 ("sock-diag: Report shutdown for inet and unix sockets (v2)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d915e584d ]
We can dump the socket queue length via UNIX_DIAG by specifying
UDIAG_SHOW_RQLEN.
If sk->sk_state is TCP_LISTEN, we return the recv queue length,
but here we do not hold recvq lock.
Let's use skb_queue_len_lockless() in sk_diag_show_rqlen().
Fixes: c9da99e647 ("unix_diag: Fixup RQLEN extension report")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83690b82d2 ]
If the socket type is SOCK_STREAM or SOCK_SEQPACKET, unix_release_sock()
checks the length of the peer socket's recvq under unix_state_lock().
However, unix_stream_read_generic() calls skb_unlink() after releasing
the lock. Also, for SOCK_SEQPACKET, __skb_try_recv_datagram() unlinks
skb without unix_state_lock().
Thues, unix_state_lock() does not protect qlen.
Let's use skb_queue_empty_lockless() in unix_release_sock().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45d872f0e6 ]
Once sk->sk_state is changed to TCP_LISTEN, it never changes.
unix_accept() takes advantage of this characteristics; it does not
hold the listener's unix_state_lock() and only acquires recvq lock
to pop one skb.
It means unix_state_lock() does not prevent the queue length from
changing in unix_stream_connect().
Thus, we need to use unix_recvq_full_lockless() to avoid data-race.
Now we remove unix_recvq_full() as no one uses it.
Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in
unix_recvq_full_lockless() because of the following reasons:
(1) For SOCK_DGRAM, it is a written-once field in unix_create1()
(2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the
listener's unix_state_lock() in unix_listen(), and we hold
the lock in unix_stream_connect()
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9f2d0573 ]
net->unx.sysctl_max_dgram_qlen is exposed as a sysctl knob and can be
changed concurrently.
Let's use READ_ONCE() in unix_create1().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0632e53e0 ]
sk_setsockopt() changes sk->sk_sndbuf under lock_sock(), but it's
not used in af_unix.c.
Let's use READ_ONCE() to read sk->sk_sndbuf in unix_writable(),
unix_dgram_sendmsg(), and unix_stream_sendmsg().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aa3be7b3e ]
While dumping AF_UNIX sockets via UNIX_DIAG, sk->sk_state is read
locklessly.
Let's use READ_ONCE() there.
Note that the result could be inconsistent if the socket is dumped
during the state change. This is common for other SOCK_DIAG and
similar interfaces.
Fixes: c9da99e647 ("unix_diag: Fixup RQLEN extension report")
Fixes: 2aac7a2cb0 ("unix_diag: Pending connections IDs NLA")
Fixes: 45a96b9be6 ("unix_diag: Dumping all sockets core")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af4c733b6b ]
unix_stream_read_skb() is called from sk->sk_data_ready() context
where unix_state_lock() is not held.
Let's use READ_ONCE() there.
Fixes: 77462de14a ("af_unix: Add read_sock for stream socket types")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a34d4e8d9 ]
The following functions read sk->sk_state locklessly and proceed only if
the state is TCP_ESTABLISHED.
* unix_stream_sendmsg
* unix_stream_read_generic
* unix_seqpacket_sendmsg
* unix_seqpacket_recvmsg
Let's use READ_ONCE() there.
Fixes: a05d2ad1c1 ("af_unix: Only allow recv on connected seqpacket sockets.")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9bf9c7dc6 ]
As small optimisation, unix_stream_connect() prefetches the client's
sk->sk_state without unix_state_lock() and checks if it's TCP_CLOSE.
Later, sk->sk_state is checked again under unix_state_lock().
Let's use READ_ONCE() for the first check and TCP_CLOSE directly for
the second check.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0718fb3e ]
unix_poll() and unix_dgram_poll() read sk->sk_state locklessly and
calls unix_writable() which also reads sk->sk_state without holding
unix_state_lock().
Let's use READ_ONCE() in unix_poll() and unix_dgram_poll() and pass
it to unix_writable().
While at it, we remove TCP_SYN_SENT check in unix_dgram_poll() as
that state does not exist for AF_UNIX socket since the code was added.
Fixes: 1586a5877d ("af_unix: do not report POLLOUT on listeners")
Fixes: 3c73419c09 ("af_unix: fix 'poll for write'/ connected DGRAM sockets")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a0f38eb28 ]
ioctl(SIOCINQ) calls unix_inq_len() that checks sk->sk_state first
and returns -EINVAL if it's TCP_LISTEN.
Then, for SOCK_STREAM sockets, unix_inq_len() returns the number of
bytes in recvq.
However, unix_inq_len() does not hold unix_state_lock(), and the
concurrent listen() might change the state after checking sk->sk_state.
If the race occurs, 0 is returned for the listener, instead of -EINVAL,
because the length of skb with embryo is 0.
We could hold unix_state_lock() in unix_inq_len(), but it's overkill
given the result is true for pre-listen() TCP_CLOSE state.
So, let's use READ_ONCE() for sk->sk_state in unix_inq_len().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 942238f973 ]
sk->sk_state is changed under unix_state_lock(), but it's read locklessly
in many places.
This patch adds WRITE_ONCE() on the writer side.
We will add READ_ONCE() to the lockless readers in the following patches.
Fixes: 83301b5367 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26bfb8b570 ]
When a SOCK_DGRAM socket connect()s to another socket, the both sockets'
sk->sk_state are changed to TCP_ESTABLISHED so that we can register them
to BPF SOCKMAP.
When the socket disconnects from the peer by connect(AF_UNSPEC), the state
is set back to TCP_CLOSE.
Then, the peer's state is also set to TCP_CLOSE, but the update is done
locklessly and unconditionally.
Let's say socket A connect()ed to B, B connect()ed to C, and A disconnects
from B.
After the first two connect()s, all three sockets' sk->sk_state are
TCP_ESTABLISHED:
$ ss -xa
Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
u_dgr ESTAB 0 0 @A 641 * 642
u_dgr ESTAB 0 0 @B 642 * 643
u_dgr ESTAB 0 0 @C 643 * 0
And after the disconnect, B's state is TCP_CLOSE even though it's still
connected to C and C's state is TCP_ESTABLISHED.
$ ss -xa
Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
u_dgr UNCONN 0 0 @A 641 * 0
u_dgr UNCONN 0 0 @B 642 * 643
u_dgr ESTAB 0 0 @C 643 * 0
In this case, we cannot register B to SOCKMAP.
So, when a socket disconnects from the peer, we should not set TCP_CLOSE to
the peer if the peer is connected to yet another socket, and this must be
done under unix_state_lock().
Note that we use WRITE_ONCE() for sk->sk_state as there are many lockless
readers. These data-races will be fixed in the following patches.
Fixes: 83301b5367 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f921a58ae2 ]
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,
taprio_parse_mqprio_opt() must validate it, or userspace
can inject arbitrary data to the kernel, the second time
taprio_change() is called.
First call (with valid attributes) sets dev->num_tc
to a non zero value.
Second call (with arbitrary mqprio attributes)
returns early from taprio_parse_mqprio_opt()
and bad things can happen.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9633e9377e ]
Like previous patch does in TCP, we need to adhere to RFC 1213:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
So let's consider CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Fixes: d9cd27b8cd ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46d0ea5c9 ]
According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit affc18fdc6 ]
q->bands will be assigned to qopt->bands to execute subsequent code logic
after kmalloc. So the old q->bands should not be used in kmalloc.
Otherwise, an out-of-bounds write will occur.
Fixes: c2999f7fb0 ("net: sched: multiq: don't call qdisc_put() while holding tree lock")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb0aa0781a ]
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.
And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].
Fixes: 30c3c4a449 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a535d59432 ]
For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.
The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.
Fixes: c5c37af6ec ("tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530232607.82686-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b98ac1cc ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in seg6_output_core() is not good enough,
because seg6_output_core() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter seg6_output_core()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in seg6_input_core().
Fixes: fa79581ea6 ("ipv6: sr: fix several BUGs when preemption is enabled")
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <dlebrun@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe40483ec ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in ioam6_output() is not good enough,
because ioam6_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter ioam6_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Fixes: 8cb3bf8bff ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e85e271dec ]
Currently NCSI driver will send several NCSI commands back to back without
waiting the response of previous NCSI command or timeout in some state
when NIC have multi channel. This operation against the single thread
manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1)
According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe
one channel at a time by sending NCSI commands (Clear initial state, Get
version ID, Get capabilities...), than repeat this steps until the max
number of channels which we got from NCSI command (Get capabilities) has
been probed.
Fixes: e6f44ed6d0 ("net/ncsi: Package and channel management")
Signed-off-by: DelphineCCChiu <delphine_cc_chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240529065856.825241-1-delphine_cc_chiu@wiwynn.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c797ce1689 ]
Background:
1. CONFIG_NCSI_OEM_CMD_KEEP_PHY
If this is enabled, we send an extra OEM Intel command in the probe
sequence immediately after discovering a channel (e.g. after "Clear
Initial State").
2. CONFIG_NCSI_OEM_CMD_GET_MAC
If this is enabled, we send one of 3 OEM "Get MAC Address" commands from
Broadcom, Mellanox (Nvidida), and Intel in the *configuration* sequence
for a channel.
3. mellanox,multi-host (or mlx,multi-host)
Introduced by this patch:
https://lore.kernel.org/all/20200108234341.2590674-1-vijaykhemka@fb.com/
Which was actually originally from cosmo.chou@quantatw.com:
9f132a10ec
Cosmo claimed that the Nvidia ConnectX-4 and ConnectX-6 NIC's don't
respond to Get Version ID, et. al in the probe sequence unless you send
the Set MC Affinity command first.
Problem Statement:
We've been using a combination of #ifdef code blocks and IS_ENABLED()
conditions to conditionally send these OEM commands.
It makes adding any new code around these commands hard to understand.
Solution:
In this patch, I just want to remove the conditionally compiled blocks
of code, and always use IS_ENABLED(...) to do dynamic control flow.
I don't think the small amount of code this adds to non-users of the OEM
Kconfigs is a big deal.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e85e271dec ("net/ncsi: Fix the multi thread manner of NCSI driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 166fcf86cd ]
The object "ax25_dev" is managed by reference counting. Thus it should
not be directly released by kfree(), replace with ax25_dev_put().
Fixes: d01ffb9eee ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240530051733.11416-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c34fb0bd4 ]
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<TASK>
? show_regs+0x64/0x70
? __warn+0x83/0x120
? refcount_warn_saturate+0xb2/0x100
? report_bug+0x158/0x190
? prb_read_valid+0x20/0x30
? handle_bug+0x3e/0x70
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xb2/0x100
? refcount_warn_saturate+0xb2/0x100
ax25_release+0x2ad/0x360
__sock_release+0x35/0xa0
sock_close+0x19/0x20
[...]
On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:
unregister_netdevice: waiting for ax0 to become free. Usage count = 0
This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release().
Fixes: 9fd75b66b8 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Lars Kellogg-Stedman <lars@oddbit.com>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Dan Cross <crossd@gmail.com>
Tested-by: Chris Maness <christopher.maness@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240529210242.3346844-2-lars@oddbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26d8dc522 ]
Currently, the way of parsing Spatial Reuse Parameter Set element is
incorrect and some members of struct ieee80211_he_obss_pd are not assigned.
To address this issue, it must be parsed in the order of the elements of
Spatial Reuse Parameter Set defined in the IEEE Std 802.11ax specification.
The diagram of the Spatial Reuse Parameter Set element (IEEE Std 802.11ax
-2021-9.4.2.252).
-------------------------------------------------------------------------
| | | | |Non-SRG| SRG | SRG | SRG | SRG |
|Element|Length| Element | SR |OBSS PD|OBSS PD|OBSS PD| BSS |Partial|
| ID | | ID |Control| Max | Min | Max |Color | BSSID |
| | |Extension| | Offset| Offset|Offset |Bitmap|Bitmap |
-------------------------------------------------------------------------
Fixes: 1ced169cc1 ("mac80211: allow setting spatial reuse parameters from bss_conf")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://msgid.link/20240516021854.5682-3-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
