Commit graph

589,246 commits

Author SHA1 Message Date
Heiko Carstens
758d39ebd3 s390/dumpstack: merge all four stack tracers
We have four different stack tracers of which three had bugs. So it's
time to merge them to a single stack tracer which allows to specify a
call back function which will be called for each step.

This patch changes behavior a bit:

- the "nosched" and "in_sched_functions" check within
  save_stack_trace_tsk did work only for the last stack frame within a
  context. Now it considers the check for each stack frame like it
  should.

- both the oprofile variant and the perf_events variant did save a
  return address twice if a zero back chain was detected, which
  indicates an interrupt frame. The new dump_trace function will call
  the oprofile and perf_events backends with the psw address that is
  contained within the corresponding pt_regs structure instead.

- the original show_trace and save_context_stack functions did already
  use the psw address of the pt_regs structure if a zero back chain
  was detected. However now we ignore the psw address if it is a user
  space address. After all we trace the kernel stack and not the user
  space stack. This way we also get rid of the garbage user space
  address in case of warnings and / or panic call traces.

So this should make life easier since now there is only one stack
tracer left which we can break.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:20 +01:00
Martin Schwidefsky
3c2c126a67 s390/mm: remove unnecessary indirection with pgste_update_all
The first parameter of pgste_update_all is a pointer to a pte.
Simplify the code by passing the pte value.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:19 +01:00
Stefan Haberland
9bfefde718 s390/dasd: fix incorrect locking order for LCU device add/remove
The correct lock order for LCU lock and cdev lock is to take the cdev
lock first and afterwards the LCU lock. This is caused by the fact
that LCU functions are called in an interrupt context with the cdev
lock implicitly hold by CIO.

To assure the right locking order but also be able to iterate over
devices in a LCU introduce a trylock block that can be called with
the device lock for one device hold and then takes the LCU lock and
try to lock all devices accounted to this LCU. Afterwards all devices
and the LCU itself are locked.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:19 +01:00
Heiko Carstens
1f021ea0da s390/dumpstack: use bit fields to decode psw mask in show_registers()
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:19 +01:00
Heiko Carstens
ca0fd75a54 s390/dumpstack: add missing ri bit to show_registers() output
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:18 +01:00
Heiko Carstens
76737ce17a s390: add current_stack_pointer() helper function
Implement current_stack_pointer() helper function and use it
everywhere, instead of having several different inline assembly
variants.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:18 +01:00
Heiko Carstens
77ec8a5451 s390/stacktrace: use nosched instead of savesched parameter
Use the inversed "nosched" logic like all other architectures.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Martin Schwidefsky
007ccec53d s390/pageattr: do a single TLB flush for change_page_attr
The change of the access rights for an address range in the kernel
address space is currently done with a loop of IPTE + a store of the
modified PTE. Between the IPTE and the store the PTE will be invalid,
this intermediate state can cause problems with concurrent accesses.

Consider a change of a kernel area from read-write to read-only, a
concurrent reader of that area should be fine but with the invalid
PTE it might get an unexpected exception.

Remove the IPTEs for each PTE and do a global flush after all PTEs
have been modified.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Martin Schwidefsky
2cfc5f9ce7 s390/xor: optimized xor routing using the XC instruction
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:17 +01:00
Sebastian Ott
9a99649f2a s390/pci: remove pdev pointer from arch data
For each PCI function we need to maintain arch specific data in
struct zpci_dev which also contains a pointer to struct pci_dev.

When a function is registered or deregistered (which is triggered by PCI
common code) we need to adjust that pointer which could interfere with
the machine check handler (triggered by FW) using zpci_dev->pdev.

Since multiple instances of the same pdev could exist at a time this can't
be solved with locking.

Fix that by ditching the pdev pointer and use a bus walk to reach
struct pci_dev (only one instance of a pdev can be registered at the bus
at a time).

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-23 08:56:16 +01:00
Laurent Pinchart
7863ac504b drm: rcar-du: Add tri-planar memory formats support
Those formats are supported on Gen3 only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:33 +02:00
Laurent Pinchart
fee8abc3bc drm: rcar-du: Add probe deferral debug messages
Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:33 +02:00
Koji Matsuoka
6bc2e15cf2 drm: rcar-du: lvds: Add R-Car Gen3 support
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:32 +02:00
Laurent Pinchart
82e7c5e496 drm: rcar-du: lvds: Rename PLLEN bit to PLLON
The bit is named PLLON in the datasheet, rename it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:31 +02:00
Laurent Pinchart
5e1ac3bdc6 drm: rcar-du: lvds: Fix PLL frequency-related configuration
The frequency checks don't match the datasheet, fix them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:30 +02:00
Laurent Pinchart
d9829a3289 drm: rcar-du: lvds: Avoid duplication of clock clamp code
Replace the duplicate code by a single central function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:30 +02:00
Laurent Pinchart
2427b30377 drm: rcar-du: Add R8A7795 device support
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:29 +02:00
Laurent Pinchart
a5e18b2b7d drm: rcar-du: Output the DISP signal on the ODDF pin
The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.

Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:28 +02:00
Laurent Pinchart
d792bc77e5 drm: rcar-du: Output the DISP signal on the DISP pin
The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:28 +02:00
Koji Matsuoka
6a8c49fc4a drm: rcar-du: Support up to 4 CRTCs
The Gen3 R8A7795 DU has 4 CRTCs, support them all.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:27 +02:00
Laurent Pinchart
dadab320e0 drm: rcar-du: Drop LVDS double dependency on OF
LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:27 +02:00
Koji Matsuoka
7372e8940b drm: rcar-du: Enable compilation on ARM64
The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:26 +02:00
Koji Matsuoka
07ece19bdc drm: rcar-du: Fix compile warning on 64-bit platforms
Use %tu instead of %u to print difference between pointers.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:25 +02:00
Laurent Pinchart
6d62ef3ac3 drm: rcar-du: Expose the VSP1 compositor through KMS planes
On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:32:44 +02:00
Alexey Brodkin
3e5177c191 arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE
Even though DEVTMPFS is required when our pre-built initramfs
is used it is not the case in general. It is perfectly possible
to use initramfs with device nodes already populated or there
could be other usages, see discussion below for more detials:
http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/37819/focus=37821

This change removes mentioned dependency from arch/arc/Kconfig
updating instead those defconfigs that are usually used with this
kind of pre-build initramfs.

And while at it all touched defconfigs were regenerated via
savedefconfig and some options were removed:
 * USB is selected by other options implicitly
 * VGA_CONSOLE is disableb for ARC since
   031e29b587
 * EXT3_FS automatically selects EXT4_FS
 * MTDxxx and JFFS2_FS make no sense for AXS because
   AXS NAND controller is not upstreamed
 * NET_OSCI_LAN is not in upstream as well
 * ARCPGU_xxx options make no sense because ARC PGU is not yet
   in upstream and when it gets there all config options would
   be taken from devicetree

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23 12:31:04 +05:30
Felipe Balbi
3b2435192f MAINTAINERS: drop OMAP USB and MUSB maintainership
Now that I have switched to another company, I won't
be able to help by maintaining OMAP USB Support and/or
the MUSB driver.

OMAP USB Support is left Orphaned. MUSB's new
maintainer will be Bin Liu from Texas Instruments
who has accepted to take over starting with v4.6.

Cc: Bin Liu <b-liu@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:39 +02:00
Cristian Birsan
4c2ba0c673 usb: musb: fix DMA for host mode
Commit ac33cdb166 ("usb: musb: Remove ifdefs for musb_host_rx in
musb_host.c part5") introduces a problem setting DMA host mode.

The musb_advance_schedule() is called immediately after receiving an
endpoint RX interrupt without waiting for the DMA transfer to complete.

As a consequence when the dma complete interrupt arrives the in_qh
member of hw_ep is already null an the musb_host_rx() exits on !urb
error case. Fix the done condition that advances the musb schedule.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:38 +02:00
Ivan T. Ivanov
8de4b3a3fc usb: phy: msm: Trigger USB state detection work in DRD mode
When working in Dual Role Device mode, USB state machine is not kicked,
when host or gadget drivers are loaded. Fix this be explicitly triggering
state detection on client driver load.

Issue is that if the board is booted without micro usb cable and usb
device attached, kernel fails to populate the usb host and device.
The reason for this is that the state machine worker logic only checks
for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker
thread. However if the phy is configured in OTG mode it would fail
to run the state machine, resulting in failure to detect for very
first time.

This patch fixes the issue by removing the explicit checks.

Issue is noticed on Qualcomm Dragon board DB410C.

[srinivas.kandagatla@linaro.org: Added more details to log]
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:38 +02:00
Simon Appleby
ca1c118942 usb: gadget: net2280: fix endpoint max packet for super speed connections
This patch fixes the register offset used for super-speed connection's
max packet size. Without it using the 338x series of devices in enhanced
mode will only allow full or high speed operation to function correctly.

Signed-off-by: Simon Appleby <simon.appleby@pickeringtest.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:38 +02:00
Marek Szyprowski
7b0a271d5c usb: gadget: gadgetfs: unregister gadget only if it got successfully registered
Gadgetfs driver called usb_gadget_unregister_driver unconditionally, even
if it didn't register it earlier due to other failures. This patch fixes
this.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:37 +02:00
Marek Szyprowski
31b994a498 usb: gadget: remove driver from pending list on probe error
Retry gadget probe only if the probe result is -EPROBE_DEFER, not on
every probe error.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-23 08:51:37 +02:00
Bryan O'Donoghue
c637fa5294 x86/platform/intel/quark: Drop IMR lock bit support
Isolated Memory Regions support a lock bit. The lock bit in an IMR prevents
modification of the IMR until the core goes through a warm or cold reset.
The lock bit feature is not useful in the context of the kernel API and is
not really necessary since modification of IMRs is possible only from
ring-zero anyway. This patch drops support for IMR locks bits, it
simplifies the kernel API and removes an unnecessary and needlessly complex
feature.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andriy.shevchenko@linux.intel.com
Cc: boon.leong.ong@intel.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/1456190999-12685-3-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:37:23 +01:00
Ingo Molnar
fb86780bf7 Merge branch 'x86/urgent' into x86/platform, to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:36:46 +01:00
Bryan O'Donoghue
dd71a17b11 x86/platform/intel/quark: Change the kernel's IMR lock bit to false
Currently when setting up an IMR around the kernel's .text section we lock
that IMR, preventing further modification. While superficially this appears
to be the right thing to do, in fact this doesn't account for a legitimate
change in the memory map such as when executing a new kernel via kexec.

In such a scenario a second kernel can have a different size and location
to it's predecessor and can view some of the memory occupied by it's
predecessor as legitimately usable DMA RAM. If this RAM were then
subsequently allocated to DMA agents within the system it could conceivably
trigger an IMR violation.

This patch fixes the this potential situation by keeping the kernel's .text
section IMR lock bit false by default.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boon.leong.ong@intel.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/1456190999-12685-2-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-23 07:35:53 +01:00
Sven Eckelmann
7e2366c626 batman-adv: Rename batadv_tt_orig_list_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:01 +08:00
Sven Eckelmann
5dafd8a6cc batman-adv: Rename batadv_tt_global_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:01 +08:00
Sven Eckelmann
95c0db90c7 batman-adv: Rename batadv_tt_local_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:00 +08:00
Sven Eckelmann
21754e2501 batman-adv: Rename batadv_orig_node_vlan *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:50:58 +08:00
Sven Eckelmann
5fff28255f batman-adv: Rename batadv_nc_path *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:11 +08:00
Sven Eckelmann
27ad7545bb batman-adv: Rename batadv_nc_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:11 +08:00
Sven Eckelmann
9c3bf08189 batman-adv: Rename batadv_softif_vlan *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:10 +08:00
Sven Eckelmann
4a13147cb5 batman-adv: Rename batadv_tvlv_container *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:10 +08:00
Sven Eckelmann
ba610043af batman-adv: Rename batadv_tvlv_handler *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:09 +08:00
Sven Eckelmann
3a01743ddf batman-adv: Rename batadv_gw_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:06 +08:00
Sven Eckelmann
a6416f9ffc batman-adv: Rename batadv_dat_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:28 +08:00
Sven Eckelmann
321e3e0884 batman-adv: Rename batadv_claim *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:27 +08:00
Sven Eckelmann
c8b86c1241 batman-adv: Rename batadv_backbone_gw *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:27 +08:00
Sven Eckelmann
accadc35a1 batman-adv: Rename batadv_hardif_neigh *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:26 +08:00
Sven Eckelmann
35f94779c9 batman-adv: Rename batadv_orig_ifinfo *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:26 +08:00
Sven Eckelmann
044fa3ae12 batman-adv: Rename batadv_neigh_ifinfo *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:25 +08:00