Commit graph

589,246 commits

Author SHA1 Message Date
Kan Liang
be280bad15 i40e/ethtool: support coalesce getting by queue
This patch implements get_per_queue_coalesce for i40e driver.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:10 -05:00
Kan Liang
a75e8005d5 i40e: queue-specific settings for interrupt moderation
For i40e driver, each vector has its own ITR register. However, there
are no concept of queue-specific settings in the driver proper. Only
global variable is used to store ITR values. That will cause problems
especially when resetting the vector. The specific ITR values could be
lost.
This patch move rx_itr_setting and tx_itr_setting to i40e_ring to store
specific ITR register for each queue.
i40e_get_coalesce and i40e_set_coalesce are also modified accordingly to
support queue-specific settings. To make it compatible with old ethtool,
if user doesn't specify the queue number, i40e_get_coalesce will return
queue 0's value. While i40e_set_coalesce will apply value to all queues.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:10 -05:00
Kan Liang
f38d138a7d net/ethtool: support set coalesce per queue
This patch implements sub command ETHTOOL_SCOALESCE for ioctl
ETHTOOL_PERQUEUE. It introduces an interface set_per_queue_coalesce to
set coalesce of each masked queue to device driver. The wanted coalesce
information are stored in "data" for each masked queue, which can copy
from userspace.
If it fails to set coalesce to device driver, the value which already
set to specific queue will be tried to rollback.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:10 -05:00
Kan Liang
421797b1aa net/ethtool: support get coalesce per queue
This patch implements sub command ETHTOOL_GCOALESCE for ioctl
ETHTOOL_PERQUEUE. It introduces an interface get_per_queue_coalesce to
get coalesce of each masked queue from device driver. Then the interrupt
coalescing parameters will be copied back to user space one by one.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:09 -05:00
Kan Liang
ac2c7ad0e5 net/ethtool: introduce a new ioctl for per queue setting
Introduce a new ioctl ETHTOOL_PERQUEUE for per queue parameters setting.
The following patches will enable some SUB_COMMANDs for per queue
setting.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:09 -05:00
David Decotigny
5fd003f56c test_bitmap: unit tests for lib/bitmap.c
This is mainly testing bitmap construction and conversion to/from u32[]
for now.

Tested:
  qemu i386, x86_64, ppc, ppc64 BE and LE, ARM.

Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:09 -05:00
David Decotigny
e52bc7c28a lib/bitmap.c: conversion routines to/from u32 array
Aimed at transferring bitmaps to/from user-space in a 32/64-bit agnostic
way.

Tested:
  unit tests (next patch) on qemu i386, x86_64, ppc, ppc64 BE and LE,
  ARM.

Signed-off-by: David Decotigny <decot@googlers.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19 22:54:09 -05:00
Nishanth Menon
000e094914 hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init).

When thermal framework invokes
gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
especially in a polled configuration for thermal governor, we
basically hog the i2c interface to the extent that other functions
fail to get any traffic out :(.

Instead, just provide the last state set in the driver - since the gpio
fan driver is responsible for the fan state immaterial of override, the
fan_data->speed_index should accurately reflect the state.

Fixes: b5cf88e46b ("(gpio-fan): Add thermal control hooks")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-02-19 17:14:25 -08:00
Bhumika Goyal
837f9989c6 Staging: wilc1000: Remove and rename struct typedefs
This patch gets rid of struct typedefs wilc_cfg_byte_t, wilc_cfg_hword_t,
wilc_cfg_word_t and wilc_cfg_str_t as as linux kernel coding style
guidelines suggest not using typdefs for structure types.
Also drop '_t' from the names.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 17:09:44 -08:00
Amitoj Kaur Chawla
fe747f0f34 staging: wilc1000: Return correct error codes
This change has been made with the goal that kernel functions should
return something more descriptive than -1 on failure.

The return value on an alloc_etherdev failure should be -ENOMEM,
and not -1.

This was found using Coccinelle. A simplified version of the semantic
patch used is:

//<smpl>
@@
expression *e;
identifier l1;
@@

e = alloc_etherdev(...);
if (e == NULL) {
...
return
- -1
+ -ENOMEM
;
}
//</smpl

Furthermore, introduced `ret` variable to store and return the
corresponding error code returned by register_netdev on failure.

The two call sites store the return value in a variable which only
checks that the value is non-zero, hence no change is required at
the call sites.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 17:00:07 -08:00
Janani Ravichandran
8459af6acf staging: wilc1000: Rearrange statement to respect 80 char limit
Split statement across multiple lines as the line modified is over 80
chars in length.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 17:00:07 -08:00
Janani Ravichandran
3e758b2788 staging: wilc1000: Use kmalloc_array instead of kmalloc
Use kmalloc_array instead of kmalloc for arrays to prevent integer
overflows.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 17:00:07 -08:00
Laurent Pinchart
ab334e137c drm: rcar-du: Move plane allocator to rcar_du_plane.c
The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:56 +02:00
Laurent Pinchart
2af0394409 drm: rcar-du: Restart the DU group when a plane source changes
Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:55 +02:00
Laurent Pinchart
34a04f2b7b drm: rcar-du: Add VSP1 compositor support
Configure the plane source at plane setup time to source frames from
memory or from the VSP1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:54 +02:00
Laurent Pinchart
af8ad96290 drm: rcar-du: Add VSP1 support to the planes allocator
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.

Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:54 +02:00
Laurent Pinchart
2f13c5296d drm: rcar-du: Refactor plane setup
Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:53 +02:00
Laurent Pinchart
ff967363dd drm: rcar-du: Compute plane DDCR4 register value directly
There's no need for a read-modify-write pattern, all register bits can
be set explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:52 +02:00
Laurent Pinchart
1b0fd0ea49 drm: rcar-du: Don't update planes on disabled CRTCs
A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:51 +02:00
Laurent Pinchart
6ea22ab4a0 drm: rcar-du: Remove local CRTC enabled state
The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:51 +02:00
Laurent Pinchart
c1d4b38c93 drm: rcar-du: Perform initialization/cleanup at probe/remove time
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.

For consistency inline the .unload() handler in the remove function as
well.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-20 02:58:50 +02:00
Laurent Pinchart
4c4400504f Merge remote-tracking branch 'linuxtv/vsp1' into HEAD 2016-02-20 02:58:43 +02:00
Janani Ravichandran
aae9620151 staging: wilc1000: Modify tcp_process to return void rather than int
tcp_process() returns int, which is not used anywhere. So, change
function header to return void intead of int and remove all uses of
the local variable ret, which is used as a return variable in the
function.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:58:06 -08:00
Amitoj Kaur Chawla
792f4b1c4e staging: wilc1000: Remove unused function
Remove wilc_wlan_global_reset function since it is not used anywhere
in this driver.

This also silences the following sparse warning:
drivers/staging/wilc1000/wilc_wlan.c:1120:6: warning: symbol
'wilc_wlan_global_reset' was not declared. Should it be static?

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:58:06 -08:00
Roger H. Newell
e0a30008be staging: wilc1000: Removed braces from single block statements
This patch corrects warnings generated by checkpatch.pl by
removing braces from single block statements.

Signed-off-by: Roger H. Newell <newell.roger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:56:26 -08:00
Roger H. Newell
5142a14eba staging: wilc1000: Whitespaces removed from function call
This patch corrects errors generated by checkpatch.pl by
removing whitespace between parameters passed to dev_err()

Signed-off-by: Roger H. Newell <newell.roger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:56:26 -08:00
Chaehyun Lim
9eab9a8f93 staging: wilc1000: handle_set_mac_address: use netdev_err
This patch uses netdev_err instead of PRINT_ER that is a custom debug
print.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
47b89ad645 staging: wilc1000: handle_set_mac_address: rename result
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. It will be changed until all handle_*() function
has same variable name as ret.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
9470edcded staging: wilc1000: handle_set_mac_address: change data type of result
result variable gets value from wilc_send_config_pkt that has return
value of int. This patch changes data type of result variable to int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
157edcca33 staging: wilc1000: handle_set_mac_address: change return type to void
When handle_set_mac_address is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes a brace of if statement due to
have a single statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
31cc9885e7 staging: wilc1000: handle_set_mac_address: use kmemdup
This patch replaces kmalloc followed by memcpy with kmemdup.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
2b489e0e26 staging: wilc1000: handle_set_mac_address: fix kmalloc return error code
This patch fix return error code of kmalloc as -ENOMEM instead of
-EFAULT.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Chaehyun Lim
b713ce0e49 staging: wilc1000: handle_set_mac_address: remove debug message of kmalloc failure
There is no need to print debug message when kmalloc is failed. This
message is redundant. The code already show us that kmalloc is failed.
The brace of if statement is remove as well due to have a single
statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:55:33 -08:00
Alison Schofield
23411f37ca staging: wilc1000: host_interface: remove unused semaphores
Remove unused semaphore declarations, initializations, and unlocks.

The functions that locked these semaphores were previously removed,
so this cleans up the remains.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:53:56 -08:00
Eva Rachel Retuya
6c2ab2398b staging: wilc1000: remove spaces around '->'
Delete the space around '->' as it is prohibited and breaks the code.
Checkpatch found this issue.

ERROR: spaces prohibited around that '->'

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:53:56 -08:00
Eva Rachel Retuya
c22177dbab staging: wilc1000: remove trailing whitespace
Remove unnecessary whitespaces as pointed out by checkpatch:

ERROR: trailing whitespace

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19 16:53:56 -08:00
Dan Williams
747ffe11b4 libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
Use the output length specified in the command to size the receive
buffer rather than the arbitrary 4K limit.

This bug was hiding the fact that the ndctl implementation of
ndctl_bus_cmd_new_ars_status() was not specifying an output buffer size.

Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-02-19 15:21:52 -08:00
Mario Kleiner
e1d09dc0cc drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
This fixes a regression introduced in Linux 4.4.

This is a port of the same fix for radeon-kms in the
patch "drm/radeon: Don't hang in radeon_flip_work_func
on disabled crtc. (v2)"

Limit the amount of time amdgpu_flip_work_func can
delay programming a page flip, by both limiting the
maximum amount of time per wait cycle and the maximum
number of wait cycles. Continue the flip if the limit
is exceeded, even if that may result in a visual or
timing glitch.

This is to prevent a hang of page flips, as reported
in fdo bug #93746: Disconnecting a DisplayPort display
in parallel to a kms pageflip getting queued can cause
the following hang of page flips and thereby an unusable
desktop:

1. kms pageflip ioctl() queues pageflip -> queues execution
   of amdgpu_flip_work_func.

2. Hotunplug of display causes the driver to DPMS OFF
   the unplugged display. Display engine shuts down,
   scanout no longer moves, but stays at its resting
   position at start line of vblank.

3. amdgpu_flip_work_func executes while crtc is off, and
   due to the non-moving scanout position, the new flip
   delay code introduced into Linux 4.4 by
   commit 8e36f9d33c ("drm/amdgpu: Fixup hw vblank counter/ts..")
   enters an infinite wait loop.

4. After reconnecting the display, the pageflip continues
   to hang in 3. and the display doesn't update its view
   of the desktop.

This patch fixes the Linux 4.4 regression from fdo bug #93746

<https://bugs.freedesktop.org/show_bug.cgi?id=93746>

Reported-by: Bernd Steinhauser <linux@bernd-steinhauser.de>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>

Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-19 18:15:30 -05:00
Mario Kleiner
2b8341b3f9 drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
This fixes a regression introduced in Linux 4.4.

Limit the amount of time radeon_flip_work_func can
delay programming a page flip, by both limiting the
maximum amount of time per wait cycle and the maximum
number of wait cycles. Continue the flip if the limit
is exceeded, even if that may result in a visual or
timing glitch.

This is to prevent a hang of page flips, as reported
in fdo bug #93746: Disconnecting a DisplayPort display
in parallel to a kms pageflip getting queued can cause
the following hang of page flips and thereby an unusable
desktop:

1. kms pageflip ioctl() queues pageflip -> queues execution
   of radeon_flip_work_func.

2. Hotunplug of display causes the driver to DPMS OFF
   the unplugged display. Display engine shuts down,
   scanout no longer moves, but stays at its resting
   position at start line of vblank.

3. radeon_flip_work_func executes while crtc is off, and
   due to the non-moving scanout position, the new flip
   delay code introduced into Linux 4.4 by
   commit 5b5561b366 ("drm/radeon: Fixup hw vblank counter/ts..")
   enters an infinite wait loop.

4. After reconnecting the display, the pageflip continues
   to hang in 3. and the display doesn't update its view
   of the desktop.

This patch fixes the Linux 4.4 regression from fdo bug #93746

<https://bugs.freedesktop.org/show_bug.cgi?id=93746>

v2: Skip wait immediately if !radeon_crtc->enabled, as
    suggested by Michel.

Reported-by: Bernd Steinhauser <linux@bernd-steinhauser.de>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Bernd Steinhauser <linux@bernd-steinhauser.de>

Cc: <stable@vger.kernel.org> # 4.4+
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-19 18:15:29 -05:00
Namhyung Kim
5b2ea6f2f6 perf report: Check error during report__collapse_hists()
If it returns an error, warn user and bail out instead of silently
ignoring it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:17:50 -03:00
Namhyung Kim
bba58cdfaa perf hists: Return error from hists__collapse_resort()
Currently hists__collapse_resort() and hists__collapse_insert_entry()
don't return an error code. Now that callchain_merge() can check for
errors, abort and pass the error to the user.  A later patch can add
more work which also can fail.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:16:06 -03:00
Namhyung Kim
dca0d122e4 perf callchain: Check return value of append_chain_children()
Now it can check the error case, so check and pass it to the caller.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:15:01 -03:00
Namhyung Kim
f2bb4c5af4 perf callchain: Check return value of split_add_child()
Now create_child() and add_child() return errors so check and pass it
to the caller.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:14:36 -03:00
Namhyung Kim
2d713b809d perf callchain: Add enum match_result for match_chain()
The append_chain() might return either result of match_chain() or other
(error) code.  But match_chain() can return any value in s64 type so
it's hard to check the error case.  Add new enum match_result and make
match_chain() return non-negative values only so that we can check the
error cases.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:14:20 -03:00
Namhyung Kim
8451cbb9b1 perf callchain: Check return value of fill_node()
Memory allocation in the fill_node() can fail so change its return type
to int and check it in add_child() too.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:13:21 -03:00
Namhyung Kim
7565bd39c1 perf callchain: Check return value of add_child()
The create_child() in add_child() can return NULL in case of memory
allocation failure.  So check the return value and bail out.  The proper
error handling will be added later.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:12:52 -03:00
Namhyung Kim
467ef10c68 perf hists browser: Fix percentage update on key press
Currently 'perf top --tui' decrements percentage of all entries on any
key press.  This is because it adds total period as new samples are
added to hists.  As perf-top does it currently but added samples are not
passed to the display thread, the percentages are decresing
continuously.

So separate total period stat into a different variable so that it
cannot affect the output total period.  This new total period stats are
used only for calcualating callchain percent limit.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0f58474ec8 ("perf hists: Update hists' total period when adding entries")
Link: http://lkml.kernel.org/r/1455631723-17345-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:12:51 -03:00
Wang Nan
43d0b97817 perf tools: Enable config and setting names for legacy cache events
This patch allows setting config terms for legacy cache events.
For example:

  # perf stat -e L1-icache-misses/name=valA/ -e branches/name=valB/ ls
  ...
   Performance counter stats for 'ls':

              11299      valA
             451605      valB

        0.000779091 seconds time elapsed

  # perf record -e cache-misses/name=inh/ -e cache-misses/name=noinh,no-inherit/ bash
  # ls
  # exit
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.023 MB perf.data (131 samples) ]
  # perf report --stdio | grep -B 1 'Event count'
  # Samples: 105  of event 'inh'
  # Event count (approx.): 109118
  --
  # Samples: 26  of event 'noinh'
  # Event count (approx.): 48302

A test case is introduced to test this feature.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:12:51 -03:00
Wang Nan
10bf358a1b perf tools: Enable config raw and numeric events
This patch allows setting config terms for raw and numeric events.
For example:

  # perf stat -e cycles/name=cyc/ ls
  ...
  1821108      cyc
  ...

  # perf stat -e r6530160/name=event/ ls
  ...
  1103195      event
  ...

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  ...
  # perf report --stdio
  ...
  # Samples: 124  of event 'cycles'
  46.61%     0.00%  swapper        [kernel.vmlinux]            [k] cpu_startup_entry
  41.26%     0.00%  swapper        [kernel.vmlinux]            [k] start_secondary
  ...
  # Samples: 91  of event 'evtx'
  ...
  93.76%     0.00%  swapper      [kernel.vmlinux]            [k] cpu_startup_entry
          |
          ---cpu_startup_entry
             |
             |--66.63%--call_cpuidle
             |          cpuidle_enter
             |          |
  ...

3 test cases are introduced to test config terms for symbol, raw and
numeric events.

Committer note:

Further testing shows that we can retrieve the event name using 'perf
evlist -v' and looking at the 'config' perf_event_attr field, i.e.:

  # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.724 MB perf.data (2076 samples) ]
  # perf evlist
  cycles
  evtx
  # perf evlist -v
  cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
evtx: type: 4, size: 112, config: 0x6530160, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
  #

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:12:50 -03:00
Arnaldo Carvalho de Melo
1d55e8ef34 perf tools: Introduce opt_event_config nonterminal
To remove duplicated code that differs only in using the matching
'/a,b,c/' part or NULL if no event configuration is done ('//' or no
pair of slashes at all).

Will be used by some new targets allowing the configuration of hardware
events, etc.

Lifted part of the 'opt_event_config' nonterminal from a patch by Wang
Nan.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-e3xzpx9cqsmwnaguaxyw6r42@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 19:12:50 -03:00