Commit graph

589,246 commits

Author SHA1 Message Date
Romain Izard
5ddc7bd43c mtd: atmel_nand: Support variable RB_EDGE interrupts
The NFC controller used to accelerate the NAND transfers on SAMA5 chips
can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit.

Use the controller's compatible string to select the correct bit.

For the binding:
Acked-by: Rob Herring <robh@kernel.org>

Reviewed-by: Wenyou Yang <Wenyou.yang@atmel.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12 10:27:46 -08:00
Wolfram Sang
50a5ba8769 i2c: mux: demux-pinctrl: add driver
This driver allows an I2C bus to switch between multiple masters. This
is not hot-switching because connected I2C slaves will be
re-instantiated. It is meant to select the best I2C core at runtime once
the task is known. Example: Prefer i2c-gpio over another I2C core
because of HW errata affecting your use case.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-12 19:16:04 +01:00
Han Xu
38714fbd29 MAINTAINERS: update Han's email
Update my email address from freescale to nxp.

Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12 10:08:16 -08:00
Linus Torvalds
5952cc779e MMC core:
- Fix an sysfs ABI regression
  - Return an error in a specific error path dealing with mmc ioctls
 
 MMM host:
  - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
  - sh_mmcif: Correct TX DMA channel allocation
  - mmc_spi: Fix error handling for dma mapping errors
  - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
  - pxamci: Fix the device-tree probe deferral path
  - pxamci: Fix read-only GPIO polarity
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWvdBdAAoJEP4mhCVzWIwpd94P/2QwChkOhWUiy+39DJbOV7A6
 0CIYm+yKhbv+lNrOIwcdCOq/HgPE2kNyhobhYFSaO7yuCuzztG2CwfK3BZb0b//n
 T84A9rcmuGQ7dS1iQxlgNam2mWKFwLpW5+MeMP91kOHI1GwvXm6pr28yh7bmUUxe
 8C05vHSsGzhPLLlg6p+2RckkoIRHaBDPRgvsyUTRM6n72CjxGWNLYkUPNIYXntNs
 mSrIPy1vJ4w1tnw1mEiNbB4l/eE6usRthu0SRbgwIzdS7YTEnMt+IWVkX7u0vyDT
 TQ75ULTqgeBVkjCORzVYgf/mQD0VC1UV3ArDEtlFmIL18gbTRAgqLRpO9IXpGAB0
 G0NtgXn/MhLn7c4G/1rCsYrGr5pRdYDdjyfKK5x9sc+3dkWmmQPPb7ZPfaH6Urgt
 wprAaT5CRRk4ymoRnVo6y4n7RZp1Y4dVRiQFQQmGWje5kM6EwjCHYH7O7XN2Izko
 i0qCdMHnh2bRTNGLbZnTqu0fXmNLRjIhPt5pH/9Y8qhPkoMP5B8Hyrh7Xp+BTx/R
 iU17FYmMqUR9MVke35Cm+9PWSHxEUUeFPQKzYycCCIcnaVuCGhWr/vWG+7/bO2lv
 CT0wX1oVub8ryGyua7tIxNkUT7+xBEjd117nuqtBZxnoZgaYO+fSl4ixQlJ3ETl7
 67pLF9sMuFfcXuhbNpyV
 =BBlq
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.5 rc4.

  MMC core:
   - Fix an sysfs ABI regression
   - Return an error in a specific error path dealing with mmc ioctls

  MMC host:
   - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
   - sh_mmcif: Correct TX DMA channel allocation
   - mmc_spi: Fix error handling for dma mapping errors
   - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
   - pxamci: Fix the device-tree probe deferral path
   - pxamci: Fix read-only GPIO polarity"

* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: block: don't use parameter prefix if built as module"
  mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
  mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
  mmc: sdhci: Allow override of get_cd() called from sdhci_request()
  mmc: sdhci: Allow override of mmc host operations
  mmc: sh_mmcif: Correct TX DMA channel allocation
  mmc: block: return error on failed mmc_blk_get()
  mmc: pxamci: fix the device-tree probe deferral path
  mmc: mmc_spi: add checks for dma mapping error
  mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
  mmc: pxamci: fix again read-only gpio detection polarity
2016-02-12 09:48:55 -08:00
Linus Torvalds
0df34ad9b7 sound fixes for 4.5-rc4
In this rc, we've got more volume than previous rc, unsurprisingly;
 the majority of updates in ASoC are about Intel drivers, and another
 major changes are the continued plumbing of ALSA timer bugs revealed
 by syzkaller fuzzer.  Hopefully both settle down now.
 
 Other than that, HD-audio received a couple of code fixes as well as
 the usual quirks, and various small fixes are found for FireWire
 devices, ASoC codecs and drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWvaEAAAoJEGwxgFQ9KSmkIoAP/j3wwbGhEm5EmJaoUurgOrSv
 wrrFulUT6okCUfOoJMnn4nmW/8iYGS7ZsUTPOfcLYndnx0hAPVsQVIdSIIQJ8Adf
 pU+9KzdGCuZt9cblZthQePXQa6FKByfURQ3ycMWTy0PGUDE8IoR79C8p829cjrdt
 0xFp64G2oEqCLHDPDpgkp6fGbA6YKKUYWFNuM+fJ99oDNnFkaHfaRCYy7dvL7QqY
 0rpOyn6wnwjmmF2ng9YE0yqLf8s7fGHzwq8kHfklFoZyhaqA7iB8yeIZwDo536co
 m1Vl2KAhv+droGr6uXT+vASMTqkRBRf+8b0Y8+sCWpRLsBOJX4vAY7iQRC9MiHMM
 A7zIXPVHeRheb+GReujoJ+RSqB8xyuN0zcMUInQogVkI6C1APt8AkPxYXXWGBASO
 04Dr+Z7frm6taQpXyOw65p5btmb5QhC9zmi79fmEk9ZMdFze74SFimpODm4u079u
 lM8wQPbRKx8cWfg/7y7M6cyZQYaYCNjy2dIl8ICyQkxB4d94aE+75hSvvHc2knJb
 IDg5orF39rK1MrQk3pjGKyoghDxMWLkVdSBi75zWsBED7jf/jtlhEy1Q7UAvaRok
 1CdxeBhQf4PTcYEz9jTRZbmXNL55r/DMKaAwJOJhDLg3HHamq86+1Zi7YlNB8C0O
 mLIjktpkIHAZZ/Xwomfq
 =60er
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "In this rc, we've got more volume than previous rc, unsurprisingly;
  the majority of updates in ASoC are about Intel drivers, and another
  major changes are the continued plumbing of ALSA timer bugs revealed
  by syzkaller fuzzer.  Hopefully both settle down now.

  Other than that, HD-audio received a couple of code fixes as well as
  the usual quirks, and various small fixes are found for FireWire
  devices, ASoC codecs and drivers"

* tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
  ASoC: arizona: fref must be limited in pseudo-fractional mode
  ASoC: sigmadsp: Fix missleading return value
  ALSA: timer: Fix race at concurrent reads
  ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
  ALSA: hda - Fix bad dereference of jack object
  ALSA: timer: Fix race between stop and interrupt
  ALSA: timer: Fix wrong instance passed to slave callbacks
  ASoC: Intel: Add module tags for common match module
  ASoC: Intel: Load the atom DPCM driver only
  ASoC: Intel: Create independent acpi match module
  ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM driver"
  ALSA: dummy: Implement timer backend switching more safely
  ALSA: hda - Fix speaker output from VAIO AiO machines
  Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
  ALSA: firewire-tascam: remove needless member for control and status message
  ALSA: firewire-tascam: remove a flag for controller
  ALSA: firewire-tascam: add support for FW-1804
  ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
  ALSA: hda - Fix static checker warning in patch_hdmi.c
  ASoC: Intel: Skylake: Remove autosuspend delay
  ...
2016-02-12 09:42:05 -08:00
Linus Torvalds
14379cdc76 fbdev fixes for v4.5
* fix omap2plus_defconfig to enable omapfb as it was in v4.4
 * ocfb: fix timings for margins
 * s6e8ax0, da8xx-fb: fix compile warnings
 * mmp: fix build failure caused by bad printk parameters
 * imxfb: fix clock issue which kept the display off
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWvb3dAAoJEPo9qoy8lh71UREP/39iw5a2pvZtKC4tbeIWGntJ
 +wP0Hp6hCxAVh8S+SsSEF2i2oZzs4/ZYgRFoGGKK3j2CcizRxG9WMvaqbb3C8s4r
 3aoj02oDyw/kpui+0O+eSUpLvc75c1nrVh31SrLK5zhx0fg59UEJZYlO/VkLTKTJ
 mN22y0VUtffx61plAs/e9EU3x6+Y3UEhDd6nuxJ+J5e9ruzjNDE5IVzyPjpP+kvA
 2ry/cjvmDKTqw2jJGYJ7CbBuAtCXz7BgT5XXKAeNLPFqewF5CN2Jck2k9Ix7M1Tv
 rAcLLEl9vrUIO5Ss3BI0VK4IXa0CYPQkPxsdVFvf26QaDXDGTdOkOAkZGMAi6jXZ
 SulDABha5VThbJUQSskBUoMF6f2l2A3MX6Gr5cNJazPagMBYCNG++HoLA17cEnH9
 a3+ujaGgdhBJqCYrJ7Wjif1wL77eHvby4xYdxdyssTVbd3MWcRqK1Nws8YBn4bw9
 jE8TOy4RAYqA/LA7QjXCel4sI6cbYejJfz1/mH31MgjWC96tRBr0NhkT7W5zQvll
 toycESYP6STwKTDfuntfo0PUwMOOxhZwVzSQD5Ov2cQvl3eEKWR1WRZLIOwWtz5/
 L4HkpCAQzIPNDOpnV7nS/jdTwwoV3bKjYluHHIeByvLrFaOQuKy/zO69pj7vUtpU
 2XgQJcu6UHLYDAwDFCuV
 =kfw6
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs
2016-02-12 09:39:34 -08:00
Linus Torvalds
4c05121e25 SCSI fixes on 20160211
A set of seven fixes.  Two regressions in the new hisi_sas arm driver, a
 blacklist entry for the marvell console which was causing a reset cascade
 without it, a race fix in the WRITE_SAME/DISCARD routines, a retry fix for the
 rdac driver, without which, it would prematurely return EIO and a couple of
 fixes for the hyper-v storvsc driver.
 
 Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJWvXAcAAoJEDeqqVYsXL0MAdkIAMC3LDF4tnfkgDmgl/vHAJTH
 q7UEOGzMv3XubgZXQRr190eWwCkpo0D0eQBqLIwV6AYMCdauTZ/kZ9Nd3ENn4+F1
 qZa+YU1vYstIS6hJkt/byZojH7bht/ueaiqxXxz21T6kNrQJt44pn2jFfUQeZoMg
 x5A16cUNdIl5H7F37qaerP/A4dNzFYGcdBJZoJZi90L7V9tzOBoaau1FdvtjFg9o
 V4N92JTpm0/I02h9znXhwoHpinREg705rB7duKHUQ82F8hBZvuXkPVibXD/xhjuy
 CXavuF1xeb/xjFh4X3a58SNRuxDuo6b8vYb8W6J0yi9j9O1iBe8XEIxgMRR6OJE=
 =i5+x
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "A set of seven fixes:

  Two regressions in the new hisi_sas arm driver, a blacklist entry for
  the marvell console which was causing a reset cascade without it, a
  race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
  driver, without which, it would prematurely return EIO and a couple of
  fixes for the hyper-v storvsc driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
  SCSI: Add Marvell Console to VPD blacklist
  scsi_dh_rdac: always retry MODE SELECT on command lock violation
  storvsc: Use the specified target ID in device lookup
  storvsc: Install the storvsc specific timeout handler for FC devices
  hisi_sas: fix v1 hw check for slot error
  hisi_sas: add dependency for HAS_IOMEM
2016-02-12 09:32:37 -08:00
Linus Torvalds
c747f97c36 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm amd fixes from Dave Airlie:
 "Been pretty quiet.

  This is an amdgpu fixes pull from AMD, a bunch of powerplay stability
  fixes, race fix, hibernate fix, and a possible circular locking fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits)
  drm/amdgpu: fix issue with overlapping userptrs
  drm/radeon: hold reference to fences in radeon_sa_bo_new
  drm/amdgpu: remove unnecessary forward declaration
  drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
  drm/amdgpu: fix s4 resume
  drm/amdgpu/cz: plumb pg flags through to powerplay
  drm/amdgpu/tonga: plumb pg flags through to powerplay
  drma/dmgpu: move cg and pg flags into shared headers
  drm/amdgpu: remove unused cg defines
  drm/amdgpu: add a cgs interface to fetch cg and pg flags
  drm/amd/powerplay/tonga: disable vce pg
  drm/amd/powerplay/tonga: disable uvd pg
  drm/amd/powerplay/cz: disable vce pg
  drm/amd/powerplay/cz: disable uvd pg
  drm/amdgpu: be consistent with uvd cg flags
  drm/amdgpu: clean up vce pg flags for cz/st
  drm/amdgpu: handle vce pg flags properly
  drm/amdgpu: handle uvd pg flags properly
  drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
  drm/amdgpu/cik: don't mess with aspm if gpu is root bus
  ...
2016-02-12 09:27:31 -08:00
Linus Torvalds
df8c2723a1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull crypto fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  EVM: Use crypto_memneq() for digest comparisons
2016-02-12 09:24:48 -08:00
Linus Torvalds
27c9d772e5 Merge branch 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "This has a few fixes from Filipe, along with a readdir fix from Dave
  that we've been testing for some time"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: properly set the termination value of ctx->pos in readdir
  Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
  Btrfs: remove no longer used function extent_read_full_page_nolock()
  Btrfs: fix page reading in extent_same ioctl leading to csum errors
  Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
2016-02-12 09:21:28 -08:00
Linus Torvalds
dfc852864d xfs: updates for 4.5-rc4
Contains:
 o fix for endian conversion issue in new CRC validation in
   log recovery that was discovered on a ppc64 platform.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJWvVMvAAoJEK3oKUf0dfodgugP/ioNOzuHYWUabT9Eltq+5ca4
 r4/vp8OcQfxQDepWacPhO3K5sR8yI7eM5KG0+NmrIO06HypLjQpLT9h6RB/oj7G2
 bIpSzYwWC/D2fCt3HNMLfHmbZRCAOSP8szeKaWp+G3VfF9cZKVpiqm0QJdQc6xi2
 52ePFw/Irx2AaThW41U6UP+B9Efw7bBQkSd4ogHXMdilG1tqsWFxTAee7V7+Z3oQ
 Pj5g6DpOpV5we3EoYGgdVu4+b66AS5I5srhm8to2wHGu22IE3z4rn1B151gRNVx7
 qrtDGdPQcgJkg5g9Ez3LLX1ikN3cBn67ZNGNXpkDveABdS17trgQ5IWxNB6Z57zq
 +nnSQnwhmr/CCZoP9F2OzVE4WUtqr5fk07NEx6eOyHcVMQeeW2fzwjzL/BXZze4/
 55GwrQU86VYHjMXeD8876qRz108v5/tlBqBrGJ6qxAMEPdKizxJFbQEE06LMz1Mi
 v9hga7ssJilo4BDIsrDZ/nkdT01rY8HZiIMUd117TWdhwafvH8wyp9a/wtdbRvu7
 tcea+n2gTGkkGcfTmgWQBvtqKU/gpDDLtpIO5zZzNE1kCiITcwnANKus9Ha0/DNj
 WBdO/a+bN+i32G0+SI9qnYMCeGMgG6FBLGVk9ZytBvRLr4Fkq2eVFmK1bWpvTMTE
 vn8QunELgutZxR2PnOyc
 =ti5p
 -----END PGP SIGNATURE-----

Merge tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs fix from Dve Chinner:
 "This contains a fix for an endian conversion issue in new CRC
  validation in log recovery that was discovered on a ppc64 platform"

* tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: fix endianness error when checking log block crc on big endian platforms
2016-02-12 09:17:03 -08:00
Tony Lindgren
cf26f11373 ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid
If a driver PM runtime is disabled via sysfs, and the module is
unloaded, PM runtime can't do anything to disable the device. Let's
let the interconnect disable the device on BUS_NOTIFY_UNBOUND_DRIVER.

Otherwise omap_device will produce and error on the following module
reload. This can be easily tested with something like:

# modprobe omap_hsmmc
# echo on > /sys/devices/platform/68000000.ocp/4809c000.mmc/power/control
# rmmod omap_hsmmc
# modprobe omap_hsmmc

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Nishanth Menon <nm@ti.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-12 08:56:52 -08:00
Tony Lindgren
08c78e9d61 ARM: OMAP2+: Improve omap_device error for driver writers
Drivers using pm_runtime_use_autosuspend() may not get disabled after
-EPROBE_DEFER. On the following device driver probe, hardware state
is different from the PM runtime state causing omap_device to produce
the following error:

omap_device_enable() called from invalid state 1

And with omap_device and omap hardware being picky for PM, this will
block any deeper idle states in hardware.

Let's add a proper error message so driver writers can easily fix
their drivers for PM.

In general, the solution is to fix the drivers to follow the PM
runtime documentation:

1. For sections of code that needs the device disabled, use
   pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has
   been set.

2. For driver exit code, use pm_runtime_dont_use_autosuspend() before
   pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been
   set.

Let's not return with 0 from _od_runtime_resume() as that will
eventually lead into new drivers with broken PM runtime that will
block deeper idle states on omaps.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Nishanth Menon <nm@ti.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-12 08:56:52 -08:00
Thomas Petazzoni
af5ece3967 ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
This commit adds the Device Tree description for the 1GB NAND flash
present in the Armada 370 DB and Armada XP DB evaluation boards from
Marvell.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-12 17:45:49 +01:00
Lior Amsalem
b3a7f31eb7 ARM: dts: armada-375: use armada-370-sata for SATA
The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which
requires the PHY speed to be set in the LP_PHY_CTL register for SATA
hotplug to work.

Therefore, this commit updates the compatible string used to describe
the SATA IP in Armada 375 from marvell,orion-sata to
marvell,armada-370-sata.

Fixes: 4de5908509 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-12 17:45:37 +01:00
Abhay Kumar
d28d4731ac drm/i915: edp resume/On time optimization.
Make resume/on codepath not to wait for panel_power_cycle_delay(t11_t12)
if this time is already spent in suspend/poweron time.

v2: Use CLOCK_BOOTTIME and remove jiffies for panel power cycle
    delay calculation(Ville).

v3: Addressed below comments
    1. Tracking time from where last powercycle is initiated.
    2. Used ktime_get_bootime() wrapper for boottime clock.
    3. Used ktime_ms_delta() to get time difference.

v4: Updated v3 change log in detail.

v5: Removed static from panel_power_on_time(Stéphane).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453513144-14135-1-git-send-email-abhay.kumar@intel.com
2016-02-12 17:07:26 +01:00
Yang Shi
a80a0eb70c arm64: make irq_stack_ptr more robust
Switching between stacks is only valid if we are tracing ourselves while on the
irq_stack, so it is only valid when in current and non-preemptible context,
otherwise is is just zeroed off.

Fixes: 132cd887b5 ("arm64: Modify stack trace and dump for use with irq_stack")
Acked-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-12 15:53:51 +00:00
Arnaldo Carvalho de Melo
89fee70943 perf hists: Do column alignment on the format iterator
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.

This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.

This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.

Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.

In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 12:52:25 -03:00
Arnaldo Carvalho de Melo
37d9bb580a perf tools: Add comment explaining the repsep_snprintf function
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4j67nvlfwbnkg85b969ewnkr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 12:52:20 -03:00
Hannes Reinecke
2d99b55d37 bio: return EINTR if copying to user space got interrupted
Commit 35dc248383 introduced a check for
current->mm to see if we have a user space context and only copies data
if we do. Now if an IO gets interrupted by a signal data isn't copied
into user space any more (as we don't have a user space context) but
user space isn't notified about it.

This patch modifies the behaviour to return -EINTR from bio_uncopy_user()
to notify userland that a signal has interrupted the syscall, otherwise
it could lead to a situation where the caller may get a buffer with
no data returned.

This can be reproduced by issuing SG_IO ioctl()s in one thread while
constantly sending signals to it.

Fixes: 35dc248 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # v.3.11+
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:17:41 -07:00
Keith Busch
f8e68a7c9a NVMe: Rate limit nvme IO warnings
We don't need to spam the kernel logs with thousands of IO cancelling
messages. We can infer all IO's are being cancelled with fewer, or
even none at all. This patch rate limits the message and uses the debug
log level as it is mainly used for testing purposes.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:31 -07:00
Keith Busch
ff23a2a15a NVMe: Poll device while still active during remove
A device failure or link down wouldn't have been detected during namespace
removal. This patch keeps the device in the list for polling so that the
thread may see such failure and initiate a reset. The device is removed
from the list after disable, so we can safely flush the reset work as
it can't be requeued when disable completes.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:16 -07:00
Keith Busch
ae1fba2001 NVMe: Requeue requests on suspended queues
It's possible a request may get to the driver after the nvme queue was
disabled. This has the request requeue if that happens.

Note the request is still "started" by the driver, but requeuing will
clear the start state for timeout handling.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-12 08:10:08 -07:00
Daniel Vetter
c11e391da2 dma-buf: Add ioctls to allow userspace to flush
The userspace might need some sort of cache coherency management e.g. when CPU
and GPU domains are being accessed through dma-buf at the same time. To
circumvent this problem there are begin/end coherency markers, that forward
directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
used like following:
     - mmap dma-buf fd
     - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
       to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
       want (with the new data being consumed by the GPU or say scanout device)
     - munmap once you don't need the buffer any more

v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the
doc about sync usage.
v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals
and its mask order check. Add <linux/types.h> include in dma-buf.h.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
2016-02-12 16:01:32 +01:00
Taeung Song
b416e204f8 perf python scripting: Append examples to err msg about audit-libs-python
To print syscall names, the audit-libs-python package is required.. If
not installed, it prints this error string:

    # perf script syscall-counts
    Install the audit-libs-python package to get syscall names.

But the package name is different in Ubuntu, mention that in the error
message, similar to a error message of util/trace-event-scripting.c:

    # perf script syscall-counts
    Install the audit-libs-python package to get syscall names.
    For example:
      # apt-get install python-audit (Ubuntu)
      # yum install audit-libs-python (Fedora)
      etc.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1455018790-13425-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 11:30:27 -03:00
Zubair Lutfullah Kakakhel
37b4e2020a perf build: Add EXTRA_LDFLAGS option to makefile
To compile for little-endian systems, you need to pass -EL to CC and LD.

EXTRA_CFLAGS works to pass -EL to CC.
Add EXTRA_LDFLAGS to pass -EL to LD.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1455024818-15842-1-git-send-email-Zubair.Kakakhel@imgtec.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 11:30:20 -03:00
Qu Wenruo
fed8f166eb btrfs: Introduce new mount option alias for nologreplay
Introduce new mount option alias "norecovery" for nologreplay, to keep
"norecovery" behavior the same with other filesystems.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-12 15:14:49 +01:00
Qu Wenruo
96da09192c btrfs: Introduce new mount option to disable tree log replay
Introduce a new mount option "nologreplay" to co-operate with "ro" mount
option to get real readonly mount, like "norecovery" in ext* and xfs.

Since the new parse_options() need to check new flags at remount time,
so add a new parameter for parse_options().

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-12 15:14:49 +01:00
Qu Wenruo
8dcddfa048 btrfs: Introduce new mount option usebackuproot to replace recovery
Current "recovery" mount option will only try to use backup root.
However the word "recovery" is too generic and may be confusing for some
users.

Here introduce a new and more specific mount option, "usebackuproot" to
replace "recovery" mount option.
"Recovery" will be kept for compatibility reason, but will be
deprecated.

Also, since "usebackuproot" will only affect mount behavior and after
open_ctree() it has nothing to do with the filesystem, so clear the flag
after mount succeeded.

This provides the basis for later unified "norecovery" mount option.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ dropped usebackuproot from show_mount, added note about 'recovery' to
  docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-12 15:14:14 +01:00
Takashi Iwai
f65e0d2998 ALSA: timer: Call notifier in the same spinlock
snd_timer_notify1() is called outside the spinlock and it retakes the
lock after the unlock.  This is rather racy, and it's safer to move
snd_timer_notify() call inside the main spinlock.

The patch also contains a slight refactoring / cleanup of the code.
Now all start/stop/continue/pause look more symmetric and a bit better
readable.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-12 15:07:31 +01:00
Wang Nan
e7ee404757 perf symbols: Fix symbols searching for module in buildid-cache
Before this patch, if a sample is triggered inside a module not in
/lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf
report' will still be unable to find the correct symbol.  For example:

  # rm -rf ~/.debug/
  # perf buildid-cache -a ./mymodule.ko
  # perf probe -m ./mymodule.ko -a get_mymodule_val
  Added new event:
    probe:get_mymodule_val (on get_mymodule_val in mymodule)

  You can now use it in all perf tools, such as:

 	perf record -e probe:get_mymodule_val -aR sleep 1

  # perf record -e probe:get_mymodule_val cat /proc/mymodule
  mymodule:3
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]

  # perf report --stdio
  [SNIP]
  #
  # Overhead  Command  Shared Object     Symbol
  # ........  .......  ................  ......................
  #
    100.00%  cat      [mymodule]        [k] 0x0000000000000001

  # perf report -vvvv --stdio
  dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70
  symbol__new: get_mymodule_val 0x70-0x8a
  [SNIP]

This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod
is true only when its file is found in some well know directories. All
files loaded from buildid-cache are treated as user programs. Following
dso__load_sym() set map->pgoff incorrectly.

This patch gives kernel modules in buildid-cache a chance to adjust
value of kmod. After dso__load() get the type of symbols, if it is
buildid, check the last 3 chars of original filename against '.ko', and
adjust the value of kmod if the file is a kernel module.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 10:54:47 -03:00
Taeung Song
c7ac24178c perf config: Add '--system' and '--user' options to select which config file is used
The '--system' option means $(sysconfdir)/perfconfig and '--user' means
$HOME/.perfconfig. If none is used, both system and user config file are
read.  E.g.:

    # perf config [<file-option>] [options]

    With an specific config file:

    # perf config --user | --system

    or both user and system config file:

    # perf config

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1455126685-32367-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12 10:54:46 -03:00
Daniel Vetter
05fd934ba5 Merge tag 'topic/drm-misc-2016-02-12' into drm-intel-next-queued
Backmerge to get at the new encoder_mask support in atomic helpers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-02-12 14:24:37 +01:00
Rafael Antognolli
e94cb37b34 drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.
This module is heavily based on i2c-dev. Once loaded, it provides one
dev node per DP AUX channel, named drm_dp_auxN, where N is an integer.

It's possible to know which connector owns this aux channel by looking
at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if
the connector device pointer was correctly set in the aux helper struct.

Two main operations are provided on the registers read and write. The
address of the register to be read or written is given using lseek. The
seek position is updated upon read or write.

v2:
 - lseek is used to select the register to read/write
 - read/write are used instead of ioctl
 - no blocking_notifier is used, just a direct callback

v3:
 - use drm_dp_aux_dev prefix for public functions
 - chardev is named drm_dp_auxN
 - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a
   time
 - remove notifier list from the implementation
 - option on menuconfig is now a boolean
 - add inline stub functions to avoid breakage when this option is disabled

v4:
 - fix build system changes - actually disable this module when not selected.

v5:
 - Use kref to avoid device closing while still in use
 - Don't use list, use an idr for storing aux_dev
 - Remove "connector" attribute
 - set aux.dev to the connector drm_connector device, instead of
   drm_device

v6:
 - Use atomic_t for usage count
 - Use a mutex instead of spinlock for idr lock
 - Destroy chardev immediately on unregister
 - other minor suggestions from Ville

v7:
 - style fixes
 - error handling fixes

v8:
 - more error handling fixes

v9:
 - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit
 to drm_kms_helper_init/exit.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-02-12 14:22:40 +01:00
Rafael Antognolli
70412cfa6d drm/kms_helper: Add a common place to call init and exit functions.
The module_init and module_exit functions will start here, and call the
subsequent init's and exit's.

v10:
 - Keep __init on drm_fb_helper init function.
 - Move MODULE_* macros to the common file.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
2016-02-12 14:22:18 +01:00
Jean Delvare
2f749c3ac7 pinctrl: intel: Remove unneeded header includes
pinctrl-intel doesn't use anything from <linux/init.h>,
<linux/acpi.h>, <linux/gpio.h> or <linux/pm.h>, so it should not
include these header files.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-12 13:56:57 +01:00
Javier Martinez Canillas
96173cc6a4 regulator: Rename files for max77686 and max77802 drivers
The max77686 and max77802 regulator drivers are for sub-devices of a MFD
driver for some PMIC blocks. But the same object file name (max77686.o)
was used for both the common MFD driver and the max77686 regulator one.

This confuses kbuild if both drivers are built as module causing the MFD
driver to not be copied when installing the modules.

Also, max77{686,802} are a quite generic name for MFD subdevices drivers
so it is better to rename them to max77{686,802}-regulator like it's the
case for most regulator drivers.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-12 12:15:51 +00:00
David S. Miller
667f00630e Merge branch 'local-checksum-offload'
Edward Cree says:

====================
Local Checksum Offload

Re-tested VxLAN; everything else is unchanged from v4.

Changes from v4:
 * Rebased series to fix conflicts with vxlan/vxlan6 merge.

Changes from v3:
 * Fixed inverted checksum values introduced in v3.
 * Don't mangle zero checksums in GRE.
 * Clear skb->encapsulation in iptunnel_handle_offloads when not using
   CHECKSUM_PARTIAL, lest drivers incorrectly interpret that as a request
   for inner checksum offload.

Changes from v2:
 * Added support for IPv4 GRE.
 * Split out 'always set up for checksum offload' into its own patch.
 * Removed csum_help from iptunnel_handle_offloads.
 * Rewrote LCO callers to only fold once.
 * Simplified nocheck handling.

Changes from v1:
 * Enabled support in more encapsulation protocols.
   I think it now covers everything except GRE.
 * Wrote up some documentation covering TX checksum offload, LCO and RCO.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:41 -05:00
Edward Cree
e8ae7b000e Documentation/networking: add checksum-offloads.txt to explain LCO
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:16 -05:00
Edward Cree
6fa79666e2 net: ip_tunnel: remove 'csum_help' argument to iptunnel_handle_offloads
All users now pass false, so we can remove it, and remove the code that
 was conditional upon it.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:16 -05:00
Edward Cree
53936107ba net: gre: Implement LCO for GRE over IPv4
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:16 -05:00
Edward Cree
06f622926d fou: enable LCO in FOU and GUE
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:16 -05:00
Edward Cree
b57085019d net: vxlan: enable local checksum offload
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:15 -05:00
Edward Cree
21e2e7f9b5 net: enable LCO for udp_tunnel_handle_offloads() users
The only protocol affected at present is Geneve.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:15 -05:00
Edward Cree
d75f1306d9 net: udp: always set up for CHECKSUM_PARTIAL offload
If the dst device doesn't support it, it'll get fixed up later anyway
 by validate_xmit_skb().  Also, this allows us to take advantage of LCO
 to avoid summing the payload multiple times.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:15 -05:00
Edward Cree
179bc67f69 net: local checksum offload for encapsulation
The arithmetic properties of the ones-complement checksum mean that a
 correctly checksummed inner packet, including its checksum, has a ones
 complement sum depending only on whatever value was used to initialise
 the checksum field before checksumming (in the case of TCP and UDP,
 this is the ones complement sum of the pseudo header, complemented).
Consequently, if we are going to offload the inner checksum with
 CHECKSUM_PARTIAL, we can compute the outer checksum based only on the
 packed data not covered by the inner checksum, and the initial value of
 the inner checksum field.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:52:15 -05:00
David S. Miller
e51271d4ce Merge branch 'tcp_dccp_ports'
Eric Dumazet says:

====================
tcp/dccp: better use of ephemeral ports

Big servers have bloated bind table, making very hard to succeed
ephemeral port allocations, without special containers/namespace tricks.

This patch series extends the strategy added in commit 07f4c90062
("tcp/dccp: try to not exhaust ip_local_port_range in connect()").

Since ports used by connect() are much likely to be shared among them,
we give a hint to both bind() and connect() to keep the crowds separated
if possible.

Of course, if on a specific host an application needs to allocate ~30000
ports using bind(), it will still be able to do so. Same for ~30000 connect()
to a unique 2-tuple (dst addr, dst port)

New implemetation is also more friendly to softirqs and reschedules.

v2: rebase after TCP SO_REUSEPORT changes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:28:38 -05:00
Eric Dumazet
ea8add2b19 tcp/dccp: better use of ephemeral ports in bind()
Implement strategy used in __inet_hash_connect() in opposite way :

Try to find a candidate using odd ports, then fallback to even ports.

We no longer disable BH for whole traversal, but one bucket at a time.
We also use cond_resched() to yield cpu to other tasks if needed.

I removed one indentation level and tried to mirror the loop we have
in __inet_hash_connect() and variable names to ease code maintenance.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:28:32 -05:00
Eric Dumazet
1580ab63fc tcp/dccp: better use of ephemeral ports in connect()
In commit 07f4c90062 ("tcp/dccp: try to not exhaust ip_local_port_range
in connect()"), I added a very simple heuristic, so that we got better
chances to use even ports, and allow bind() users to have more available
slots.

It gave nice results, but with more than 200,000 TCP sessions on a typical
server, the ~30,000 ephemeral ports are still a rare resource.

I chose to go a step further, by looking at all even ports, and if none
was available, fallback to odd ports.

The companion patch does the same in bind(), but in opposite way.

I've seen exec times of up to 30ms on busy servers, so I no longer
disable BH for the whole traversal, but only for each hash bucket.
I also call cond_resched() to be gentle to other tasks.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-12 05:28:32 -05:00
Emil Goode
fb724ed5c6 wlcore: Fix regression in wlcore_set_partition()
The commit 3719c17e18 ("wlcore/wl18xx: fw logger over sdio") introduced a
regression causing the wlcore to time out and go into recovery. Reverting the
changes regarding write of the last partition size brings the module back to
it's functional state.

Fixes: 3719c17e18 ("wlcore/wl18xx: fw logger over sdio")
Reported-by: Ross Green <rgkernel@gmail.com>
Signed-off-by: Emil Goode <emil.fsw@goode.io>
[kvalo@codeaurora.org: improved commit log]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-12 11:44:47 +02:00