Commit graph

589,246 commits

Author SHA1 Message Date
Lucas Stach
a77c5422d7 PCI: imx6: Remove broken Gen2 workaround
Remove the remnants of the workaround for erratum ERR005184 which was never
completely implemented.  The checks alone don't carry any value as we don't
act properly on the result.

A workaround should be added to the lane speed change in establish_link
later.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25 16:49:57 -06:00
Lucas Stach
54a47a8342 PCI: imx6: Move PHY reset into imx6_pcie_establish_link()
This adds the PHY reset into a common error path of
imx6_pcie_establish_link(), deduplicating some of the debug prints.  Also
reduce the severity of the "no-link" message in the one place where it is
expected to be hit when no peripheral is attached.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25 16:49:53 -06:00
Lucas Stach
53eeb48b49 PCI: imx6: Move imx6_pcie_reset_phy() near other PHY handling functions
Move imx6_pcie_reset_phy() near the other PHY related functions in the
file.  This is a cosmetic change, but also allows to do the following
changes without introducing needless forward declarations.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-25 16:49:46 -06:00
Tejun Heo
566d1827df libata: disable forced PORTS_IMPL for >= AHCI 1.3
Some early controllers incorrectly reported zero ports in PORTS_IMPL
register and the ahci driver fabricates PORTS_IMPL from the number of
ports in those cases.  This hasn't mattered but with the new nvme
controllers there are cases where zero PORTS_IMPL is valid and should
be honored.

Disable the workaround for >= AHCI 1.3.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: stable@vger.kernel.org
2016-01-25 15:45:55 -05:00
Shikha Jain
b00622fc34 libata: blacklist a Viking flash model for MWDMA corruption
Viking flash model VRFDFC22048UCHC-TE causes data corruption in MWDMA mode.

Cc: xe-kernel@external.cisco.com
Signed-off-by: Shikha Jain <shikjain@cisco.com>
Signed-off-by: Anil Veliyankara Madam <aveliyan@cisco.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-25 15:24:13 -05:00
Danesh Petigara
fb32963355 drivers: ata: wake port before DMA stop for ALPM
The AHCI driver code stops and starts port DMA engines at will
without considering the power state of the particular port. The
AHCI specification isn't very clear on how to handle this scenario,
leaving implementation open to interpretation.

Broadcom's STB SATA host controller is unable to handle port DMA
controller restarts when the port in question is in low power mode.
When a port enters partial or slumber mode, its PHY is powered down.
When a controller restart is requested, the controller's internal
state machine expects the PHY to be brought back up by software which
never happens in this case, resulting in failures.

To avoid this situation, logic is added to manually wake up the port
just before its DMA engine is stopped, if the port happens to be in
a low power state. HBA initiated power management ensures that the port
eventually returns to its configured low power state, when the link is
idle (as per the conditions listed in the spec). A new host flag is also
added to ensure this logic is only exercised for hosts with the above
limitation.

tj: Formatting changes.

Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-25 15:20:44 -05:00
Diego Viola
3047bcc537 README: cosmetic fixes
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-01-25 12:39:18 -07:00
Thomas Gardner
32fd52d56b Documentation/CodingStyle: add space before parenthesis in example macro
Signed-off-by: Thomas Gardner <tmg@fastmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-01-25 12:36:28 -07:00
Jakub Wilk
6ac9937c97 SubmittingPatches: fix spelling of "git send-email"
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-01-25 12:30:18 -07:00
Takashi Iwai
462b3f161b ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
Some architectures like PowerPC can handle the maximum struct size in
an ioctl only up to 13 bits, and struct snd_compr_codec_caps used by
SNDRV_COMPRESS_GET_CODEC_CAPS ioctl overflows this limit.  This
problem was revealed recently by a powerpc change, as it's now treated
as a fatal build error.

This patch is a stop-gap for that: for architectures with less than 14
bit ioctl struct size, get rid of the handling of the relevant ioctl.
We should provide an alternative equivalent ioctl code later, but for
now just paper over it.  Luckily, the compress API hasn't been used on
such architectures, so the impact must be effectively zero.

Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-25 20:27:33 +01:00
Adam Ford
0ea24daae0 ARM: dts: Fix wl12xx missing clocks that cause hangs
The tcxo-clock-frequency binding is listed as optional,
but without it the wl12xx used on the torpedo + wireless
may hang.  Scanning also appears broken without this patch.

Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 687c276761 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 10:52:35 -08:00
Haiyang Zhang
c85e492445 hv_netvsc: Fix book keeping of skb during batching process
Since eliminating send_completion_tid from struct hv_netvsc_packet, we
haven't add proper book keeping for the skb of the batched packet. This
patch fixes this issue and allows the previous skb is properly freed.
Otherwise, a panic may happen.
Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:53 -08:00
Vitaly Kuznetsov
757647e10e hv_netvsc: use skb_get_hash() instead of a homegrown implementation
Recent changes to 'struct flow_keys' (e.g commit d34af823ff ("net: Add
VLAN ID to flow_keys")) introduced a performance regression in netvsc
driver. Is problem is, however, not the above mentioned commit but the
fact that netvsc_set_hash() function did some assumptions on the struct
flow_keys data layout and this is wrong.

Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change
will also imply switching to Jenkins hash from the currently used Toeplitz
but it seems there is no good excuse for Toeplitz to stay.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:53 -08:00
Thadeu Lima de Souza Cascardo
87e57399e9 sit: set rtnl_link_ops before calling register_netdevice
When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before
ipip6_tunnel_create is called. When register_netdevice is called, there is
no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:53 -08:00
Johannes Berg
05f3b50ea8 net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28
is wrong if some other ARM platform uses this device - the operation
of the driver would depend on an unrelated ARM platform that might
or might not be set for multi-platform kernels.

Prior to my previous patch, any other platforms using it would have
been broken already due to having the cbd_datlen/cbd_sc fields in
the wrong order, but byte ordering correctly, so no such platforms
can exist and work today.

In any case, it seems likely that only Freescale SoCs use this part,
and those are little-endian on ARM, so CONFIG_ARM is safe for them.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:53 -08:00
Sudip Mukherjee
62f2aaabcf defxx: fix build warning
We are getting many build warnings about:
'bar_start' may be used uninitialized
and
'bar_len' may be used uninitialized

They are not actually uninitialized as dfx_get_bars() will initialize
them properly. But still lets have them initialized just to satisfy the
compiler (gcc 4.8.2).

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:52 -08:00
Sudip Mukherjee
36df745536 net: macb: fix build warning
We are getting build warning about:
macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function
macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function

In reality they are not used uninitialized as clk_init() will initialize
them, this patch will just silence the warning.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:52 -08:00
Johannes Berg
5cfa30397b net: fec: make driver endian-safe
The driver treats the device descriptors as CPU-endian, which appears
to be correct with the default endianness on both ARM (typically LE)
and PowerPC (typically BE) SoCs, indicating that the hardware block
is generated differently. Add endianness annotations and byteswaps as
necessary.

It's not clear that the ifdef there really is correct and shouldn't
just be #ifdef CONFIG_ARM, but I also can't test on anything but the
i.MX6 HummingBoard where this gets it working with a BE kernel.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:51:52 -08:00
Russell King
db0e51afa4 net: dsa: fix mv88e6xxx switches
Since commit 76e398a627 ("net: dsa: use switchdev obj for VLAN add/del
ops"), the Marvell 88E6xxx switch has been unable to pass traffic
between ports - any received traffic is discarded by the switch.
Taking a port out of bridge mode and configuring a vlan on it also the
port to start passing traffic.

With the debugfs files re-instated to allow debug of this issue by
comparing the register settings between the working and non-working
case, the reason becomes clear:

     GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
- 7:  1111    707f    2001     2    2    2    2    2    0    2
+ 7:  1111    707f    2001     1    1    1    1    1    0    1

Register 7 for the ports is the default vlan tag register, and in the
non-working setup, it has been set to 2, despite vlan 2 not being
configured.  This causes the switch to drop all packets coming in to
these ports.  The working setup has the default vlan tag register set
to 1, which is the default vlan when none is configured.

Inspection of the code reveals why.  The code prior to this commit
was:

-		for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
...
-			if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID)
-				err = ds->drv->port_pvid_set(ds, p->port, vid);

but the new code is:

+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
...
+	}
...
+	if (pvid)
+		err = _mv88e6xxx_port_pvid_set(ds, port, vid);

This causes the new code to always set the default vlan to one higher
than the old code.

Fix this.

Fixes: 76e398a627 ("net: dsa: use switchdev obj for VLAN add/del ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:49:15 -08:00
Martin Roth
426f04684b 82xx: FCC: Fixing a bug causing to FCC port lock-up (second try)
This is an additional patch to the one already submitted recently.
The previous patch was not complete, and the FCC port lock-up scenario
has been reproduced in lab.
I had an opportunity to check the current patch in lab and the FCC
port lock no longer freezes, while the previous patch still locks-up the
FCC port.
The current patch fixes a pointer arithmetic bug (second bug in the same
line), which leads FCC port lock-up during underrun/collision handling.
Within the tx_startup() function in mac-fcc.c, the address of last BD is
not calculated correctly. As a result of wrong calculation of the last BD
address, the next transmitted BD may be set to an area out of the transmit
BD ring. This actually causes to port lock-up and it is not recoverable.

Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:47:01 -08:00
Tony Lindgren
7e3b120770 Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
Thomas Egerer
32b6170ca5 ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIV
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have
to select CRYPTO_ECHAINIV in order to work properly. This solves the
issues caused by a misconfiguration as described in [1].
The original approach, patching crypto/Kconfig was turned down by
Herbert Xu [2].

[1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html
[2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2

Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25 10:45:41 -08:00
Martin Fuzzey
8d1a0ae724 ARM: perf: Set ARMv7 SDER SUNIDEN bit
ARMv7 counters other than the CPU cycle counter only work if the Secure
Debug Enable Register (SDER) SUNIDEN bit is set.

Since access to the SDER is only possible in secure state, it will
only be done if the device tree property "secure-reg-access" is set.

Without this:

 Performance counter stats for 'sleep 1':

          14606094 cycles                    #    0.000 GHz
                 0 instructions              #    0.00  insns per cycle

After applying:

 Performance counter stats for 'sleep 1':

           5843809 cycles
           2566484 instructions              #    0.44  insns per cycle

       1.020144000 seconds time elapsed

Some platforms (eg i.MX53) may also need additional platform specific
setup.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Pooya Keshavarzi <Pooya.Keshavarzi@de.bosch.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
[will: add warning if property is found on arm64]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-25 18:37:44 +00:00
Daniel Vetter
09859d2a3c drm/crtc-helper: Add caveat to disable_unused_functions doc
This shouldn't be used by atomic drivers any more, it confuses the
state tracking.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452695476-31147-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25 19:35:06 +01:00
Daniel Vetter
941a77b078 drm/gma500: Remove empty preclose hook
I'm auditing them all, empty ones just confuse ...

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-9-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25 19:35:05 +01:00
Daniel Vetter
d704f8e1a6 drm/armada: Remove NULL open/pre/postclose hooks
The compiler will do this, but the void hits when grepping all the
hooks for a subsystem wide audit are slightly annoying. So remove them
for next time around.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-8-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25 19:35:05 +01:00
Daniel Vetter
0b5ef656f7 drm/fsl: Remove preclose hook
Doesn't do anything, but annoys when auditing them all.

Cc: Jianwei Wang <jianwei.wang.chn@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-7-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25 19:35:04 +01:00
Daniel Vetter
fb740cf249 drm: Create drm_send_event helpers
Use them in the core vblank code and exynos/vmwgfx drivers.

Note that the difference between wake_up_all and _interruptible in
vmwgfx doesn't matter since the only waiter is the core code in
drm_fops.c. And that is interruptible.

v2: Adjust existing kerneldoc too.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Acked-by: Daniel Stone <daniels@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Inki Dae <inki.dae@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-6-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Squash in compile fixup, spotted by 0-day.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-25 19:34:43 +01:00
Nick Hoath
1803c035ef drm/i915: Fix context/engine cleanup order
Swap the order of context & engine cleanup, so that contexts are cleaned
up first, and *then* engines. This is a more sensible order anyway, but
in particular has become necessary since the 'intel_ring_initialized()
must be simple and inline' patch, which now uses ring->dev as an
'initialised' flag, so it can now be NULL after engine teardown. This
in turn can cause a problem in the context code, which (used to) check
the ring->dev->struct_mutex -- causing a fault if ring->dev was NULL.

Also rename the cleanup function to reflect what it actually does
(cleanup engines, not a ringbuffer), and fix an annoying whitespace issue.

v2: Also make the fix in i915_load_modeset_init, not just in
    i915_driver_unload (Chris Wilson)
v3: Had extra stuff in it.
v4: Reverted extra stuff (so we're back to v2).
    Rebased and updated commentary above (Dave Gordon).

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453405067-32890-3-git-send-email-david.s.gordon@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-25 19:09:03 +01:00
Chris Wilson
768e159f43 drm/i915: Improve handling of overlapping objects
The generic interval tree we use to speed up range invalidation is an
augmented rbtree that can report all overlapping intervals for a given
range. Therefore we do not need to degrade to a linear list if we find
overlapping objects. Oops.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453397563-2848-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-25 19:03:46 +01:00
Matthias Brugger
be29523da3 soc: mediatek: SCPSYS: use builtin_platform_driver
SCPSYS can't be built as module. Use builtin_platform_driver instead.
For this probe must not be __init and the data accessed can't be
__initconst. Remove this macros. To make the impact as small as possible,
fold scp_domain_data into scp_domain via a pointer.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-01-25 18:59:41 +01:00
Louis Yu
5b0fb1ea13 ARM: mediatek: add mt2701 smp bringup code
Add support for booting secondary CPUs on mt2701.

Signed-off-by: Louis Yu <louis.yu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-01-25 18:59:41 +01:00
Henry Chen
a3bbfbb0bc soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of WDT_SRC_EN
Since STAUPD interrupts aren't handled on mt8173, disable watchdog timeout
monitor of STAUPD to avoid WDT_INT triggered by STAUPD.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-01-25 18:59:41 +01:00
John Crispin
fd63892fcf ARM: mediatek: add MT7623 smp bringup code
Add support for booting secondary CPUs on MT7623.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-01-25 18:59:41 +01:00
Henry Chen
73efe5792b soc: mediatek: PMIC wrap: Clear the vldclr if state machine stay on FSM_VLDCLR state.
Sometimes PMIC is too busy to send data in time to cause pmic wrap timeout,
because pmic wrap is waiting for FSM_VLDCLR after finishing WACS2_CMD. It
just return error when issue happened, so the state machine will stay on
FSM_VLDCLR state when data send back later by PMIC and timeout again in next
time because pmic wrap waiting for FSM_IDLE state at the beginning of the
read/write function.

Clear the vldclr when timeout if state machine stay on FSM_VLDCLR.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Tested-by: Ricky Liang <jcliang@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-01-25 18:59:41 +01:00
Neil Armstrong
20437f79f6 ARM: OMAP: Add PWM dmtimer platform data quirks
In order to set the currently platform dependent dmtimer
functions pointers as platform data for the pwm-omap-dmtimer
platform driver, add it to plat-omap auxdata_lookup table.

Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 09:51:28 -08:00
Heiner Kallweit
fb16aaf58c [media] nuvoton-cir: fix setting ioport base address
At least on Zotac CI321 ACPI provides an ioport range for the wake up part
but accessing these ioports has no effect.
Instead the ioport base address is set to another value already
(0xa20 in my case) and accessing this ioport range works.

Therefore set a new ioport base address only if the current ioport base
address is 0 (register reset default).

The need to use the existing base address instead of trying to set
an own one doesn't seem to be limited to this specific device as other
drivers like hwmon/nct6775 do it the same way.

This change was successfully tested on the mentioned device.
And the change should be generic enough to not break the driver for
other chips (however due to lack of appropriate hardware I wasn't
able to test this).

[mchehab@osg.samsung.com: Tested on Intel NUC NUC5i7RYB with BIOS
 version RYBDWi35.86A.0350.2015.0812.1722]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:42 -02:00
Heiner Kallweit
d790c9b93b [media] nuvoton-cir: remove unneeded call to nvt_set_cir_iren
Calling nvt_set_cir_iren separately is not needed as this is done
by nvt_cir_regs_init.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:41 -02:00
Heiner Kallweit
0c6fbfdf86 [media] nuvoton-cir: remove unneeded EFM operation in nvt_cir_isr
Selecting the logical device in the interrupt handler is not needed
as no configuration register is accessed.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:41 -02:00
Heiner Kallweit
ccca00d6d7 [media] nuvoton-cir: improve logical device handling
Only enable the logical devices after the registers have been initialized.

The call to nvt_enable_logical_dev in nvt_resume is not needed as this is
done implicitely by nvt_cir_regs_init now.

[mchehab@osg.samsung.com: fixed multiline comment to kernel CodingStyle]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:40 -02:00
Heiner Kallweit
0890655c29 [media] nuvoton-cir: factor out logical device enabling
Factor out enabling of a logical device.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:40 -02:00
Heiner Kallweit
f2c2ba0e25 [media] nuvoton-cir: use IR_DEFAULT_TIMEOUT and consider SAMPLE_PERIOD
Switch to using the recently introduced IR default timeout value
(IR_DEFAULT_TIMEOUT) and consider the value of SAMPLE_PERIOD
when calculating the limit count register value.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:39 -02:00
Heiner Kallweit
e1a7d981cf [media] nuvoton-cir: fix clearing wake fifo
At least on NVT6779D clearing the wake fifo works in learning mode only
(although this condition is not mentioned in the chip spec).
Setting the clear fifo bit has no effect in wake up mode.
Even if clearing the wake fifo should work in wake up mode on other
chips this workaround doesn't hurt.
If needed the caller of nvt_clear_cir_wake_fifo has to take care
of locking.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:45:35 -02:00
Heiner Kallweit
a17ede9ac1 [media] nuvoton-cir: factor out logical device disabling
Factor out disabling of a logical device.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:44:24 -02:00
Heiner Kallweit
1feac493b0 [media] nuvoton-cir: simplify nvt_cir_tx_inactive
Simplify nvt_cir_tx_inactive.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:44:19 -02:00
Heiner Kallweit
7a89836e99 [media] nuvoton-cir: simplify nvt_select_logical_ dev
Use nvt_cr_write to simplify nvt_select_logical_ dev.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:44:14 -02:00
Heiner Kallweit
3def9ad6d3 [media] nuvoton-cir: use request_muxed_region for accessing EFM registers
The two EFM ioports are accessed by drivers for other parts of the Nuvoton
Super-IO chips too. Therefore access to these ioports needs to be
protected by using request_muxed_region (like it's implemented e.g. in
hwmon/nct6775 already).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:44:06 -02:00
Markus Elfring
a73cfe527c [media] msi2500: Delete an unnecessary check in msi2500_set_usb_adc()
This issue was detected by using the Coccinelle software.

Return the value from a call of the msi2500_ctrl_msg() function
without using an extra check for the variable "ret" at the end.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:15:39 -02:00
Markus Elfring
61f8e1a732 [media] r820t: Delete an unnecessary variable initialisation in generic_set_freq()
The variable "rc" will be set to an appropriate value from a call of
the r820t_set_tv_standard() function.
Thus let us omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:15:39 -02:00
Markus Elfring
2050d14c6e [media] tuners: Refactoring for m88rs6000t_sleep()
This issue was detected by using the Coccinelle software.

1. Let us return directly if a call of the regmap_write() function failed.

2. Delete the jump label "err" then.

3. Return zero as a constant at the end.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 15:15:38 -02:00