Commit graph

589,246 commits

Author SHA1 Message Date
Ley Foon Tan
eff31f4002 PCI: altera: Fix altera_pcie_link_is_up()
Originally altera_pcie_link_is_up() decided the link was up if any of the
low four bits of the LTSSM register were set.  But the link is only up if
the LTSSM state is L0, so check for that exact value.

[bhelgaas: changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-11 12:14:39 -06:00
Linus Torvalds
63cf207e93 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
  breakage on recovery from failed rename() in jffs2"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  jffs2: reduce the breakage on recovery from halfway failed rename()
  ncpfs: fix a braino in OOM handling in ncp_fill_cache()
2016-03-11 10:13:49 -08:00
Simon Horman
304e6d572b PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS.  The motivation is that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-11 12:03:41 -06:00
Dmitry Torokhov
62d5bdf972 Merge branch 'synaptics-rmi4' into next
Bring in support for devices using Synaptics RMI4 protocol, including
RMI4 bus, 2D sensor and button handlers, and SPI and I2C interface
drivers.
2016-03-11 09:51:25 -08:00
Brian Norris
6871c1b96d mtd: nand: remove kerneldoc for removed function parameter
The 'getchip' parameter is gone as of commit 9f3e04297b ("mtd: nand:
don't select chip in nand_chip's block_bad op"), so kill the doc with
it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-03-11 09:41:19 -08:00
Dan Carpenter
8134233e8d ata: ahci_xgene: dereferencing uninitialized pointer in probe
If the call to acpi_get_object_info() fails then "info" hasn't been
initialized.  In that situation, we already know that "version" should
be XGENE_AHCI_V1 so we don't actually need to dereference "info".

Fixes: c9802a4be6 ('ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:40:34 -05:00
Anna-Maria Gleixner
22aceb3176 workqueue: Fix comment for work_on_cpu()
Function is processed in thread context, not in user context.

Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:39:01 -05:00
Scott Lawson
8ba559fd09 AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
These PCI device IDs have been removed from the Intel Lewisburg design
specification. They are no longer needed.

Signed-off-by: Scott Lawson <scott.lawson@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:31:49 -05:00
Tejun Heo
fe6c58146d Merge branch 'for-4.5-fixes' into for-4.6 2016-03-11 12:30:17 -05:00
Parav Pandit
6c83e6cb0c Documentation: cgroup v2: Trivial heading correction.
Corrected the heading to match with index.

Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-11 12:13:28 -05:00
Amir Vadai
8208d21bf3 net/flower: Fix pointer cast
Cast pointer to unsigned long instead of u64, to fix compilation warning
on 32 bit arch, spotted by 0day build.

Fixes: 5b33f48 ("net/flower: Introduce hardware offload support")
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 12:04:37 -05:00
Sukadev Bhattiprolu
4c9d6c18fd perf test: Remove 'core_id' check in topo test
The topology test case of 'perf test' seems to be broken on my x86
system - due to the comparison of a "core-id" with # of CPUs online.

There are 8 online CPUs:

	$ cat /sys/devices/system/cpu/online
	0-7

but core-ids are not sequential and some core-ids exceed the number
of online CPUs.

	$ cat /sys/devices/system/cpu/cpu?/topology/core_id
	0
	1
	9
	10
	0
	1
	9
	10

Looks like we can safely remove the check.  Output before:

	$ perf --version
	perf version 4.4.rc1.g34258a

	$ perf test -v topo
	36: Test topology in session                                 :
	--- start ---
	test child forked, pid 5906
	templ file: /tmp/perf-test-vCwWG3
	core_id number is too big.You may need to upgrade the perf tool.
	test child interrupted
	---- end ----
	Test topology in session: FAILED!

and after:

	$ perf test -v topo
	36: Test topology in session                                 :
	--- start ---
	test child forked, pid 6532
	templ file: /tmp/perf-test-y10wFJ
	CPU 0, core 0, socket 0
	CPU 1, core 1, socket 0
	CPU 2, core 9, socket 0
	CPU 3, core 10, socket 0
	CPU 4, core 0, socket 1
	CPU 5, core 1, socket 1
	CPU 6, core 9, socket 1
	CPU 7, core 10, socket 1
	test child finished with 0
	---- end ----
	Test topology in session: Ok

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20151203233219.GA27696@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-11 13:45:04 -03:00
Dan Carpenter
07c9a8e077 btrfs: scrub: silence an uninitialized variable warning
It's basically harmless if "ref_level" isn't initialized since it's only
used for an error message, but it causes a static checker warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:21:59 +01:00
Anand Jain
ebb8765b2d btrfs: move btrfs_compression_type to compression.h
So that its better organized.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:12:46 +01:00
Anand Jain
8ae1af3cd1 btrfs: rename btrfs_print_info to btrfs_print_mod_info
So that it indicates what it does.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:12:46 +01:00
Satoru Takeuchi
3c1d84b71e Btrfs: Show a warning message if one of objectid reaches its highest value
It's better to show a warning message for the exceptional case
that one of objectid (in most case, inode number) reaches its
highest value. For example, if inode cache is off and this event
happens, we can't create any file even if there are not so many files.
This message ease detecting such problem.

Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:12:35 +01:00
Sudeep Holla
3c177a1662 pinctrl: single: Use a separate lockdep class
The single pinmux controller can be cascaded to the other interrupt
controllers. Hence when propagating wake-up settings to its parent
interrupt controller, there's possiblity of detecting possible recursive
locking and getting lockdep warning.

This patch avoids this false positive by using a separate lockdep class
for this single pinctrl interrupts.

Cc: linux-gpio@vger.kernel.org
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-11 23:03:06 +07:00
David Sterba
6788f5ca64 Documentation: btrfs: remove usage specific information
The document in the kernel sources is yet another palce where the
documentation would need to be updated, while it is not the primary
source. We actively maintain the wiki pages.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:02:09 +01:00
Rasmus Villemoes
02def69fae btrfs: use kbasename in btrfsic_mount
This is more readable.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 16:55:52 +01:00
Andre Przywara
96851d391d drivers: pinctrl: add driver for Allwinner A64 SoC
Based on the Allwinner A64 user manual and on the previous sunxi
pinctrl drivers this introduces the pin multiplex assignments for
the ARMv8 Allwinner A64 SoC.
Port A is apparently used for the fixed function DRAM controller, so
the ports start at B here (the manual mentions "n from 1 to 7", so
not starting at 0).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-11 22:46:27 +07:00
Johan Hedberg
6a0e78072c Bluetooth: Fix potential buffer overflow with Add Advertising
The Add Advertising command handler does the appropriate checks for
the AD and Scan Response data, however fails to take into account the
general length of the mgmt command itself, which could lead to
potential buffer overflows. This patch adds the necessary check that
the mgmt command length is consistent with the given ad and scan_rsp
lengths.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2016-03-11 16:28:43 +01:00
Johan Hedberg
6a19cc8c89 Bluetooth: Fix setting correct flags in AD
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by
get_adv_instance_flags(), however failed to take into account limited
discoverable mode. This patch fixes the issue by setting the correct
discoverability flag in the AD data.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-11 16:28:24 +01:00
Rafael J. Wysocki
5b3e7e0536 Merge branches 'device-properties-fixes' and 'acpica-fixes'
* device-properties-fixes:
  device property: fwnode->secondary may contain ERR_PTR(-ENODEV)

* acpica-fixes:
  ACPICA: Revert "Parser: Fix for SuperName method invocation"
2016-03-11 14:22:54 +01:00
Tadeusz Struk
34074205bb crypto: qat - remove redundant arbiter configuration
The default arbiter configuration for ring weights and response ordering
is exactly what we want so we don't need to configure anything more.
This will also fix the problem where number of bundles is different
between different devices.

Reported-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:22:18 +08:00
Vladimir Zapolskiy
b62917a262 crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.

The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: 5a4eea2658 ("crypto: ux500 - Use devm_xxx() managed function")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:20 +08:00
Vladimir Zapolskiy
9b52d55f4f crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.

The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: b0e8b3417a ("crypto: atmel - use devm_xxx() managed function")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:19 +08:00
Pingchao Yang
84a0ced0b6 crypto: qat - Change the definition of icp_qat_uof_regtype
The definition of icp_qat_uof_regtype should be coherent with
 the definition in firmware compiler.

Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:19 +08:00
Arnd Bergmann
b93f342da1 hwrng: exynos - use __maybe_unused to hide pm functions
The exynos random driver uses #ifdef to check for CONFIG_PM, but
then uses SIMPLE_DEV_PM_OPS, which leaves the references out when
CONFIG_PM_SLEEP is not defined, so we get a warning with
PM=y && PM_SLEEP=n:

drivers/char/hw_random/exynos-rng.c:166:12: error: 'exynos_rng_suspend' defined but not used [-Werror=unused-function]
drivers/char/hw_random/exynos-rng.c:171:12: error: 'exynos_rng_resume' defined but not used [-Werror=unused-function]

This removes the incorrect #ifdef and instead uses a __maybe_unused
annotation to let the compiler know it can silently drop
the function definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:18 +08:00
Gary R Hook
ea0375afa1 crypto: ccp - Add abstraction for device-specific calls
Support for different generations of the coprocessor
requires that an abstraction layer be implemented for
interacting with the hardware. This patch splits out
version-specific functions to a separate file and populates
the version structure (acting as a driver) with function
pointers.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:17 +08:00
Gary R Hook
c7019c4d73 crypto: ccp - CCP versioning support
Future hardware may introduce new algorithms wherein the
driver will need to manage resources for different versions
of the cryptographic coprocessor. This precursor patch
determines the version of the available device, and marks
and registers algorithms accordingly. A structure is added
which manages the version-specific data.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:16 +08:00
Gary R Hook
553d2374db crypto: ccp - Support for multiple CCPs
Enable management of >1 CCPs in a system. Each device will
get a unique identifier, as well as uniquely named
resources. Treat each CCP as an orthogonal unit and register
 resources individually.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:07 +08:00
Gary R Hook
3f19ce2054 crypto: ccp - Remove check for x86 family and model
Each x86 SoC will make use of a unique PCI ID for the CCP
device so it is not necessary to check for the CPU family
and model.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-11 21:19:06 +08:00
Arnd Bergmann
13aa38e291 xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
The Xen framebuffer driver selects the xen keyboard driver, so the latter
will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT
is a loadable module, this configuration cannot work. On mainline kernels,
the symbol will be enabled but not used, while in combination with
a patch I have to detect such useless configurations, we get the
expected link failure:

drivers/input/built-in.o: In function `xenkbd_remove':
xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device'
xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device'

This removes the extra "select", as it just causes more trouble than
it helps. In theory, some defconfig file might break if it has
XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig
fragment we ship in the kernel (kernel/configs/xen.config) however
already enables both, and anyone using an old .config file would
keep having both enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Fixes: 36c1132e34 ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND")
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-11 13:37:02 +02:00
Catalin Marinas
2776e0e8ef arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
With the 16KB and 64KB page size configurations, SWAPPER_BLOCK_SIZE is
PAGE_SIZE and ARM64_SWAPPER_USES_SECTION_MAPS is 0. Since
kimg_shadow_end is not page aligned (_end shifted by
KASAN_SHADOW_SCALE_SHIFT), the edges of previously mapped kernel image
shadow via vmemmap_populate() may be overridden by subsequent calls to
kasan_populate_zero_shadow(), leading to kernel panics like below:

------------------------------------------------------------------------------
Unable to handle kernel paging request at virtual address fffffc100135068c
pgd = fffffc8009ac0000
[fffffc100135068c] *pgd=00000009ffee0003, *pud=00000009ffee0003, *pmd=00000009ffee0003, *pte=00e0000081a00793
Internal error: Oops: 9600004f [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc4+ #1984
Hardware name: Juno (DT)
task: fffffe09001a0000 ti: fffffe0900200000 task.ti: fffffe0900200000
PC is at __memset+0x4c/0x200
LR is at kasan_unpoison_shadow+0x34/0x50
pc : [<fffffc800846f1cc>] lr : [<fffffc800821ff54>] pstate: 00000245
sp : fffffe0900203db0
x29: fffffe0900203db0 x28: 0000000000000000
x27: 0000000000000000 x26: 0000000000000000
x25: fffffc80099b69d0 x24: 0000000000000001
x23: 0000000000000000 x22: 0000000000002000
x21: dffffc8000000000 x20: 1fffff9001350a8c
x19: 0000000000002000 x18: 0000000000000008
x17: 0000000000000147 x16: ffffffffffffffff
x15: 79746972100e041d x14: ffffff0000000000
x13: ffff000000000000 x12: 0000000000000000
x11: 0101010101010101 x10: 1fffffc11c000000
x9 : 0000000000000000 x8 : fffffc100135068c
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000004
x3 : fffffc100134f651 x2 : 0000000000000400
x1 : 0000000000000000 x0 : fffffc100135068c

Process swapper/0 (pid: 1, stack limit = 0xfffffe0900200020)
Call trace:
[<fffffc800846f1cc>] __memset+0x4c/0x200
[<fffffc8008220044>] __asan_register_globals+0x5c/0xb0
[<fffffc8008a09d34>] _GLOBAL__sub_I_65535_1_sunrpc_cache_lookup+0x1c/0x28
[<fffffc8008f20d28>] kernel_init_freeable+0x104/0x274
[<fffffc80089e1948>] kernel_init+0x10/0xf8
[<fffffc8008093a00>] ret_from_fork+0x10/0x50
------------------------------------------------------------------------------

This patch aligns kimg_shadow_start and kimg_shadow_end to
SWAPPER_BLOCK_SIZE in all configurations.

Fixes: f9040773b7 ("arm64: move kernel image to base of vmalloc area")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2016-03-11 11:03:35 +00:00
Catalin Marinas
2f76969f2e arm64: kasan: Use actual memory node when populating the kernel image shadow
With the 16KB or 64KB page configurations, the generic
vmemmap_populate() implementation warns on potential offnode
page_structs via vmemmap_verify() because the arm64 kasan_init() passes
NUMA_NO_NODE instead of the actual node for the kernel image memory.

Fixes: f9040773b7 ("arm64: move kernel image to base of vmalloc area")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: James Morse <james.morse@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
2016-03-11 11:03:34 +00:00
Catalin Marinas
fdc69e7df3 arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
The set_pte_at() function must update the hardware PTE_RDONLY bit
depending on the state of the PTE_WRITE and PTE_DIRTY bits of the given
entry value. However, it currently only performs this for pte_valid()
entries, ignoring PTE_PROT_NONE. The side-effect is that PROT_NONE
mappings would not have the PTE_RDONLY bit set. Without
CONFIG_ARM64_HW_AFDBM, this is not an issue since such PROT_NONE pages
are not accessible anyway.

With commit 2f4b829c62 ("arm64: Add support for hardware updates of
the access and dirty pte bits"), the ptep_set_wrprotect() function was
re-written to cope with automatic hardware updates of the dirty state.
As an optimisation, only PTE_RDONLY is checked to assess the "dirty"
status. Since set_pte_at() does not set this bit for PROT_NONE mappings,
such pages may be considered "dirty" as a result of
ptep_set_wrprotect().

This patch updates the pte_valid() check to pte_present() in
set_pte_at(). It also adds PTE_PROT_NONE to the swap entry bits comment.

Fixes: 2f4b829c62 ("arm64: Add support for hardware updates of the access and dirty pte bits")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Tested-by: Ganapatrao Kulkarni <gkulkarni@cavium.com>
Cc: <stable@vger.kernel.org>
2016-03-11 11:03:34 +00:00
Florian Westphal
f0716cd6eb netfilter: nft_compat: check match/targetinfo attr size
We copy according to ->target|matchsize, so check that the netlink attribute
(which can include padding and might be larger) contains enough data.

Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-11 11:37:56 +01:00
Pablo Neira Ayuso
d387eaf51f Merge tag 'ipvs-fixes-for-v4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs
Simon Horman says:

====================
please consider these IPVS fixes for v4.5 or
if it is too late please consider them for v4.6.

* Arnd Bergman has corrected an error whereby the SIP persistence engine
  may incorrectly access protocol fields
* Julian Anastasov has corrected a problem reported by Jiri Bohac with the
  connection rescheduling mechanism added in 3.10 when new SYNs in
  connection to dead real server can be redirected to another real server.
* Marco Angaroni resolved a problem in the SIP persistence engine
  whereby the Call-ID could not be found if it was at the beginning of a
  SIP message.
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-11 11:37:35 +01:00
Vineet Gupta
2d746eeb4f ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE
The problem is with CONFIG_CPU_BIG_ENDIAN=y we still needed .config
fixup to override the the defconfig prefix to arceb-linux-

So remove these from defconfig and let user pass this via CROSS_COMPILE
environment var or use the default for ENDIAN (per previous patch)

No other arch carries them in defconfigs anyways !

Cc: Noam Camus <noamc@ezchip.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synosys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-11 14:59:55 +05:30
Vineet Gupta
89a269285f ARC: [BE] Select correct CROSS_COMPILE prefix
This allows CONFIG_CPU_BIG_ENDIAN=y to build correctly out of the box,
w/o any other tweaks.

Cc: Noam Camus <noamc@ezchip.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synosys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-11 14:59:54 +05:30
Vineet Gupta
2a41b6dc28 ARC: bitops: Remove non relevant comments
commit 80f420842f removed the ARC bitops microoptimization but failed
to prune the comments to same effect

Fixes: 80f420842f ("ARC: Make ARC bitops "safer" (add anti-optimization)")
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-11 14:59:54 +05:30
Adam Buchbinder
7423cc0cae ARC: Fix misspellings in comments.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-11 14:59:53 +05:30
Dan Carpenter
143d36a33b irqchip/irq-alpine-msi: Release the correct domain on error
The "msi_domain" variable is NULL here so it leads to a NULL dereference.  It
looks like we actually intended to free "middle_domain".

Fixes: e6b78f2c3e ('irqchip: Add the Alpine MSIX interrupt controller')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: kernel-janitors@vger.kernel.org
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Link: http://lkml.kernel.org/r/20160311081442.GE31887@mwanda
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-11 10:06:55 +01:00
Dave Hansen
0d47638f80 x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
Kirill Shutemov pointed this out to me.

The tip tree currently has commit:

	dfb4a70f2 [x86/cpufeature, x86/mm/pkeys: Add protection keys related CPUID definitions]

whioch added support for two new CPUID bits: X86_FEATURE_PKU and
X86_FEATURE_OSPKE.  But, those bits were mis-merged and put in
cpufeature.h instead of cpufeatures.h.

This didn't cause any breakage *except* it keeps the "ospke" and
"pku" bits from showing up in cpuinfo.

Now cpuinfo has the two new flags:

	flags	: ...  pku ospke

BTW, is it really wise to have cpufeature.h and cpufeatures.h?
It seems like they can only cause confusion and mahem with tab
completion.

Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160310221213.06F9DB53@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-11 09:55:57 +01:00
Max Filippov
c91e02bd97 xtensa: support hardware breakpoints/watchpoints
Use perf framework to manage hardware instruction and data breakpoints.
Add two new ptrace calls: PTRACE_GETHBPREGS and PTRACE_SETHBPREGS to
query and set instruction and data breakpoints.
Address bit 0 choose instruction (0) or data (1) break register, bits
31..1 are the register number.
Both calls transfer two 32-bit words: address (0) and control (1).
Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set.
Data breakpoint control word bit 31 is 'trigger on store', bit 30 is
'trigger on load, bits 29..0 are length. Length 0 is used to clear a
breakpoint. To set a breakpoint length must be a power of 2 in the range
1..64 and the address must be length-aligned.

Introduce new thread_info flag: TIF_DB_DISABLED. Set it if debug
exception is raised by the kernel code accessing watched userspace
address and disable corresponding data breakpoint. On exit to userspace
check that flag and, if set, restore all data breakpoints.

Handle debug exceptions raised with PS.EXCM set. This may happen when
window overflow/underflow handler or fast exception handler hits data
breakpoint, in which case save and disable all data breakpoints,
single-step faulting instruction and restore data breakpoints.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00
Max Filippov
6ec7026ac0 xtensa: use context structure for debug exceptions
With implementation of data breakpoints debug exceptions raised when
PS.EXCM is set need to be handled, e.g. window overflow code can write
to watched userspace address. Currently debug exception handler uses
EXCSAVE and DEPC SRs to save temporary registers, but DEPC may not be
available when PS.EXCM is set and more space will be needed to save
additional state.
Reorganize debug context: create per-CPU structure debug_table instance
and store its address in the EXCSAVE<debug level> instead of
debug_exception function address. Expand this structure when more save
space is needed.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00
Max Filippov
816aa58895 xtensa: remove remaining non-functional KGDB bits
KGDB is not supported on xtensa, but there are bits of related code
under arch/xtensa/kernel. Remove these bits.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00
Max Filippov
7de7ac785a xtensa: clear all DBREAKC registers on start
There are XCHAL_NUM_DBREAK registers, clear them all.
This also fixes cryptic assembler error message with binutils 2.25 when
XCHAL_NUM_DBREAK is 0:

  as: out of memory allocating 18446744073709551575 bytes after a total
  of 495616 bytes

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00
Max Filippov
56b9f9d672 xtensa: xtfpga: fix earlycon endianness
Serial port is attached to XTFPGA boards as native endian device, now
that earlycon parameter parser understands mmio32native put it into
earlycon kernel parameter. This makes early console functional on both
little- and big-endian CPUs with identical kernel command lines.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00
Max Filippov
bce299ca54 xtensa: xtfpga: fix i2c controller register width and endianness
I2C controller is attached to XTFPGA boards as native endian device, mark
it as such in DTS.
Set register width in DTS to 4, this way it works both for little- and
big-endian CPUs.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-11 08:53:32 +00:00