Commit graph

589,246 commits

Author SHA1 Message Date
Jan Höppner
46d1c03c82 s390/dasd: Improve dasd format code
- Make sure a calling function can rely on data in fdata by resetting to
  its initial values
- Move special treatment for track 0 and 1 to dasd_eckd_build_format
- Replace dangerous backward goto with a loop logic
- Add define for number that specifies the maximum amount of CCWs per
  request and is used for format_step calculation
- Remove unused variable

Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07 13:11:56 +01:00
Christian Lamparter
2f10e50e3d carl9170: import 1.9.9 firmware headers
Import new headers from my firmware branch:
<https://github.com/chunkeey/carl9170fw>

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07 14:11:09 +02:00
One Thousand Gnomes
9cc3fdc86c rt2x00: unterminated strlen of user data
The buffer needs to be zero terminated in case the user data is not.
Otherwise we run off the end of the buffer.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07 14:00:25 +02:00
Larry Finger
7b5acd11a3 rtlwifi: rtl8821ae: Silence useless log output
When driver rtl8821ae is loaded but not connected to any AP, it logs
a "firmware not ready to run" message roughly once a minute. To
eliminate logging this massage under normal debug conditions, the
degug level needed to print this message is increased.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07 13:59:08 +02:00
Sara Sharon
7c70fee5ae iwlwifi: mvm: extend time event duration
Before authentication, we start a time event during
which we wait for a beacon in order to sync our timers.
If we didn't hear the beacon during this time - we abandon
the connection. However, in congested environment, it was
observed we might not hear beacons in that time slot.
Extend the time event to give the connection a better chance.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-07 13:34:16 +02:00
Sara Sharon
30d915c2ec iwlwifi: mvm: set the correct amsdu enum values
The amsdu enum values are off by 1 bit. Fix it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-07 13:34:16 +02:00
Chaya Rachel Ivgi
04ddc2aacc iwlwifi: mvm: fix unregistration of thermal in some error flows
The call to iwl_mvm_thermal_initialize() was too early in the
function.
Unregister will be performed when goto out_unregister is called,
but as the code was - out_free may be called and leave without
unregistering from thermal.

Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-07 13:34:15 +02:00
Sara Sharon
afd5b1704c iwlwifi: refactor the code that reads the MAC address from the NVM
It makes it slightly easier to follow. Pass the pointer to
the transport which allows to read WFMP_MAC_ADDR_X register
only when needed and to use IWL_ERR instead of the less
commonly used IWL_ERR_DEV logger macro.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-07 13:33:00 +02:00
Andreas Färber
cc733bc906 ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Add Device Trees for Tronsmart Vega S95 Pro, Meta and Telos TV boxes.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 11:12:40 +01:00
Andreas Färber
3c7bccccd3 Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
Use "tronsmart,vega-s95" as well as
    "tronsmart,vega-s95-pro",
    "tronsmart,vega-s95-meta" and
    "tronsmart,vega-s95-telos" compatible strings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 11:12:40 +01:00
Andreas Färber
4f24eda840 ARM64: dts: Prepare configs for Amlogic Meson GXBaby
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 11:12:40 +01:00
Andreas Färber
985b81817c Documentation: devicetree: amlogic: Document Meson GXBaby
Use "amlogic,meson-gxbb" compatible string.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 11:12:30 +01:00
Matthias Brugger
1cd6709175 devicetree: bindings: Add vendor prefix for Tronsmart
Tronsmart is a China based company building consumer electronic
devices.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 11:11:52 +01:00
Takashi Iwai
ad09ef2cce ASoC: Fixes for v4.5
This is far too big a set of fixes for this late in the release cycle
 but the overwhelming bulk is essentially the same simple fix from
 Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
 interface where drivers were accessing things using the wrong element in
 a union which worked OK on 32 bit platforms as the correct element
 happened to be aligned the same way but with 64 bit platforms ABIs are
 different and the two members of the union are laid out in different
 places.  They aren't all tagged to stable since some of these chips have
 vanishingly little chance of being used in 64 bit systems.
 
 The other changes are:
  - A fix for Qualcomm devices to work on big endian systems.  The
    original change is actually correct but triggered a bug in regmap
    which is too invasive to fix for this cycle and can be worked around
    by just letting regmap pick the default.
  - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
    spinlocks when it needed to.
  - A fix for the new Intel Sky Lake driver forgetting that C pointer
    arithmetic takes the type of the pointer into consideration.
  - A revert of a change to the FSL SSI driver that broke some systems.
  - A fix for the cleanup path of the wm9713 driver.
  - A fix for some incorrect register definitions in the ADAU17x1 driver
    that caused misclocking in some configurations.
  - A fix for the tracepoints for jack detection to avoid using an
    internal field of the core jack structure which is no longer present
    in all configurations.
  - A fix for another of the new Intel drivers which tried to write to a
    string literal.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW3OpsAAoJECTWi3JdVIfQ/lMH/05/atIZLFI3tfxpp9P1zCD2
 6BH6aUtGEz8uh7wpfLlgUKvBhFZxZmr2aYHiuD2c2UQYWJ5L14GavkUvrohQ1oBp
 6LGN2pJ/0uhQ6XnFHcYnJt5C3pdQspNxaNZBCTdLQZDjjki13Q8jXVL2vToFFbpK
 vFEHLqeuwtSLgtgNJMHHLR6o5QpfX7lcMGKwsfNI8k5b+2j5UDh+fwGQcnU9wueU
 FyxIy9FNlHd1nWwQDNyGL06pMKazsPV6KaPDXa/rG6RsOBxpjz+5JgCVKmAh7EUp
 /qUS2Xy0DVTkedtunnA9EIIHyfC1zuFjeH6lU2UyP/A2kcMlzpNyt7uMRK0dolg=
 =+Y7p
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.5

This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places.  They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.

The other changes are:
 - A fix for Qualcomm devices to work on big endian systems.  The
   original change is actually correct but triggered a bug in regmap
   which is too invasive to fix for this cycle and can be worked around
   by just letting regmap pick the default.
 - A fix for the Samsung I2S driver locking which wasn't using IRQ safe
   spinlocks when it needed to.
 - A fix for the new Intel Sky Lake driver forgetting that C pointer
   arithmetic takes the type of the pointer into consideration.
 - A revert of a change to the FSL SSI driver that broke some systems.
 - A fix for the cleanup path of the wm9713 driver.
 - A fix for some incorrect register definitions in the ADAU17x1 driver
   that caused misclocking in some configurations.
 - A fix for the tracepoints for jack detection to avoid using an
   internal field of the core jack structure which is no longer present
   in all configurations.
 - A fix for another of the new Intel drivers which tried to write to a
   string literal.
2016-03-07 11:06:46 +01:00
Andreas Färber
451e9e54e2 ARM64: Enable Amlogic Meson GXBaby platform
Provide the ARCH_MESON Kconfig symbol to allow enabling existing serial
and i2c drivers.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2016-03-07 10:44:31 +01:00
Mugunthan V N
0f514e6907 ARM: dts: dra7: do not gate cpsw clock due to errata i877
Errata id: i877

Description:
------------
The RGMII 1000 Mbps Transmit timing is based on the output clock
(rgmiin_txc) being driven relative to the rising edge of an internal
clock and the output control/data (rgmiin_txctl/txd) being driven relative
to the falling edge of an internal clock source. If the internal clock
source is allowed to be static low (i.e., disabled) for an extended period
of time then when the clock is actually enabled the timing delta between
the rising edge and falling edge can change over the lifetime of the
device. This can result in the device switching characteristics degrading
over time, and eventually failing to meet the Data Manual Delay Time/Skew
specs.
To maintain RGMII 1000 Mbps IO Timings, SW should minimize the
duration that the Ethernet internal clock source is disabled. Note that
the device reset state for the Ethernet clock is "disabled".
Other RGMII modes (10 Mbps, 100Mbps) are not affected

Workaround:
-----------
If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps,
SW should minimize the time the Ethernet internal clock source is disabled
to a maximum of 200 hours in a device life cycle. This is done by enabling
the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android)
by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP.

So, do not allow to gate the cpsw clocks using ti,no-idle property in
cpsw node assuming 1000 Mbps is being used all the time. If someone does
not need 1000 Mbps and wants to gate clocks to cpsw, this property needs
to be deleted in their respective board files.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07 01:41:22 -07:00
Lokesh Vutla
2e18f5a1bc ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.

Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07 01:41:21 -07:00
Ingo Molnar
ec87e1cf7d Linux 4.5-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW3LO0AAoJEHm+PkMAQRiGhewIAIVHA1+qSSXEHTFeuLRuYpiz
 +ptQUIjPJdakWm/XqOnwSG8SWUuD4XL6ysfNmLSZIdqXYBAPpAuwT1UA2FZhz0dN
 soZxMNleAvzHWRDFLqwjVdOVlTxS6CTTdEQNzi+3R0ZCADllsRcuj/GBIY+M8cr6
 LvxK8BnhDU+Au3gZQjaujTMO7fKG6gOq4wKz/U7RIG37A6rwW577kEfLg4ZgFwt9
 RVjsky5mrX9+4l3QFtox9ZC383P/0VZ6+vXwN2QH1/joDK4EvA8pCwsGTyjRJiqi
 fArHbS+mHyAtbPWJmDbVlQ5dkZJAqRgtWBydjQYoC16S4Bwdce2/FbhBiTgEQAo=
 =sqln
 -----END PGP SIGNATURE-----

Merge tag 'v4.5-rc7' into x86/asm, to pick up SMAP fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-07 09:27:30 +01:00
Kuninori Morimoto
09e5907549 ASoC: rsnd: CMD TIMSEL support for Capture
CMD.out should use same as SRC.out for TIMSEL settings,
but it cares Playback case only. This patch fixup it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
0102eed57c ASoC: rsnd: SRC TIMSEL support for Capture
SRC has Sync/Async mode, and it can't use Sync mode when Capture
with CMD. In Async mode, it needs to care about in/out SRC rate
for settings, but current driver supporting Playback case only.
This patch supports Capture case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
cbf1494fbc ASoC: rsnd: add rsnd_src_get_in/out_rate()
SRC will convert rate, and then, CMD and SSI want to know its
rate (= SRC.in / SRC.out) for each purpose.
Current driver is supporting only Playback, but SRC+Capture support
needs more flexibility.
This patch adds rsnd_src_get_in/out_rate() for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
ab2049f9de ASoC: rsnd: rename rsnd_enable_sync_convert() to rsnd_src_sync_is_enabled()
rsnd_enable_sync_convert() is for checking, not for setting.
In order to avoid confusion, this patch renamed it to
rsnd_src_sync_is_enabled()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
1a9be9ee19 ASoC: rsnd: SRC function parameter uses "mod" instead of "src"
To reduce confusion, SRC uses "mod" instead of "src"
as function parameter

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
b5ebbb3a16 ASoC: rsnd: SRC sync mode is not related to clock master mode
SRC sync mode needs to control its clock (= for in/out). 1st but codec
side clock

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Kuninori Morimoto
61a219fe19 ASoC: rsnd: don't enable SRC Sync mode when Capture with CMD
It can't use SRC Synchronous convert when Capture if it uses CMD,
because no one provide out side clocks.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:41:54 +07:00
Bard Liao
57586fb764 ASoC: rt5640: add supplys for dac power
The DAC1/2 power is for both DACs and related mixer/mux. Add SUPPLY
type widgets to support it.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:39:38 +07:00
Bard Liao
c467fc0e01 ASoC: rt5640: Set PLL src according to source
rt5640_set_dai_pll set pll source according to given source and
dai id. However, the pll source should be set according to given
source only.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:39:38 +07:00
James Ban
623f7b9339 regulator: pv88090: fix incorrect clear of event register
This is a patch to fix incorrect clear of event register.

Signed-off-by: James Ban <James.Ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:39:03 +07:00
Kuninori Morimoto
74e26809fb ASoC: rsrc-card: tidyup convert-channels explain
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:20:01 +07:00
John Lin
d7fcd13663 ASoC: rt5616: add missing mute control for HPVOL
Add missing kcontrol for HPVOL mute control.

Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07 14:19:15 +07:00
Bamvor Jian Zhang
a961f9b472 gpiolib: rewrite gpiodev_add_to_list
The original code of gpiodev_add_to_list is not very clear which
lead to bugs or compiling warning, reference the following patches:
Bugs:
1.  Commit ef7c755303 ("gpiolib: improve overlap check of range of
    gpio").
2.  Commit 96098df125 ("gpiolib: fix chip order in gpio list")

Warning:
1.  Commit e28ecca6ea ("gpio: fix warning about iterator").
of gpio").

There is a off-list discussion about how to improve it consequently.
This commit try to follow this by rewriting the whole functions.

Tested pass with my gpio mockup driver and test scripts[1].

[1] http://www.spinics.net/lists/linux-gpio/msg09598.html

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 12:02:46 +07:00
Axel Lin
24030d9d95 gpio: moxart: Allow compile test build
There is no build dependency for this driver, so enable COMPILE_TEST to get
better build coverage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 11:38:34 +07:00
Axel Lin
0c271658aa gpio: moxart: Drop redundant code to set already initialized gpio_chip fields
These fields are initialized by bgpio_init() with exactly the same settings
so remove the redundant code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 11:37:11 +07:00
Jon Paul Maloy
e74a386d70 tipc: remove pre-allocated message header in link struct
Until now, we have kept a pre-allocated protocol message header
aggregated into struct tipc_link. Apart from adding unnecessary
footprint to the link instances, this requires extra code both to
initialize and re-initialize it.

We now remove this sub-optimization. This change also makes it
possible to clean up the function tipc_build_proto_msg() and remove
a couple of small functions that were accessing the mentioned header.
In particular, we can replace all occurrences of the local function
call link_own_addr(link) with the generic tipc_own_addr(net).

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 23:01:20 -05:00
Parthasarathy Bhuvaragan
4de13d7ed6 tipc: fix nullptr crash during subscription cancel
commit 4d5cfcba2f ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().

This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.

In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.

Fixes: 4d5cfcba2f ('tipc: fix connection abort during subscription cancel')
Reported-by: Anders Widell <anders.widell@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 23:00:08 -05:00
Colin Ian King
11f7f79b40 net: eth: altera: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:59:18 -05:00
Colin Ian King
57a0f36754 net/ethoc: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:58:51 -05:00
Phil Sutter
44ef548f4f net: sched: fix act_ipt for LOG target
Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:57:35 -05:00
Colin Ian King
eb1f420214 asix: do not free array priv->mdio->irq
Used to be allocated and required freeing, but now
priv->mdio->irq is now a fixed sized array and should no longer be
free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc3536 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:56:48 -05:00
Richard Alpe
34f65dbb6c tipc: make sure required IPv6 addresses are scoped
Make sure the user has provided a scope for multicast and link local
addresses used locally by a UDP bearer.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:57 -05:00
Richard Alpe
ddb3712552 tipc: safely copy UDP netlink data from user
The netlink policy for TIPC_NLA_UDP_LOCAL and TIPC_NLA_UDP_REMOTE
is of type binary with a defined length. This causes the policy
framework to threat the defined length as maximum length.

There is however no protection against a user sending a smaller
amount of data. Prior to this patch this wasn't handled which could
result in a partially incomplete sockaddr_storage struct containing
uninitialized data.

In this patch we use nla_memcpy() when copying the user data. This
ensures a potential gap at the end is cleared out properly.

This was found by Julia with Coccinelle tool.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:57 -05:00
Richard Alpe
2837f39c7c tipc: don't check link reset on non existing link
Make sure we have a link before checking if it has been reset or not.

Prior to this patch tipc_link_is_reset() could be called with a non
existing link, resulting in a null pointer dereference.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:56 -05:00
Richard Alpe
9b3009604b tipc: add net device to skb before UDP xmit
Prior to this patch enabling a IPv4 UDP bearer caused a null pointer
dereference in iptunnel_xmit_stats(), when it tried to dereference the
net device from the skb. To resolve this we now point the skb device
to the net device resolved from the routing table.

Fixes: 039f50629b (ip_tunnel: Move stats update to iptunnel_xmit())
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:56 -05:00
Torsten Duwe
8c50b72a3b powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel
Firstly we add logic to Kconfig to allow a user to choose if they want
mprofile-kernel. This has to be user-selectable because only some
current toolchains support it. If we enabled it unconditionally we would
prevent some users from building the kernel entirely.

Arguably it would be nice if we could detect if mprofile-kernel was
available, and use it then. However that would violate the principle of
least surprise because a user having choosen options such as live
patching, would then see them quietly disabled at build time.

We also make the user selectable option negative, ie. it disables when
selected, so that allyesconfig continues to build on old toolchains.

Once we've decided we do want to use mprofile-kernel, we then add a
script which checks it actually works. That is because there are
versions of gcc that accept the flag but don't generate correct code.

Due to the way kconfig works, we can't error out when we detect a
non-working toolchain. If we did a user would never be able to modify
their config and run oldconfig - because the check would block oldconfig
from running. Instead we emit a warning and add a bogus flag to CFLAGS
so that the build will fail.

Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:56 +11:00
Torsten Duwe
153086644f powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI
The gcc switch -mprofile-kernel defines a new ABI for calling _mcount()
very early in the function with minimal overhead.

Although mprofile-kernel has been available since GCC 3.4, there were
bugs which were only fixed recently. Currently it is known to work in
GCC 4.9, 5 and 6.

Additionally there are two possible code sequences generated by the
flag, the first uses mflr/std/bl and the second is optimised to omit the
std. Currently only gcc 6 has the optimised sequence. This patch
supports both sequences.

Initial work started by Vojtech Pavlik, used with permission.

Key changes:
 - rework _mcount() to work for both the old and new ABIs.
 - implement new versions of ftrace_caller() and ftrace_graph_caller()
   which deal with the new ABI.
 - updates to __ftrace_make_nop() to recognise the new mcount calling
   sequence.
 - updates to __ftrace_make_call() to recognise the nop'ed sequence.
 - implement ftrace_modify_call().
 - updates to the module loader to surpress the toc save in the module
   stub when calling mcount with the new ABI.

Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:55 +11:00
Torsten Duwe
9a7841ae8d powerpc/ftrace: Use $(CC_FLAGS_FTRACE) when disabling ftrace
Rather than open-coding -pg whereever we want to disable ftrace, use the
existing $(CC_FLAGS_FTRACE) variable.

This has the advantage that it will work in future when we use a
different set of flags to enable ftrace.

Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:55 +11:00
Torsten Duwe
c96f83856f powerpc/ftrace: Use generic ftrace_modify_all_code()
Convert powerpc's arch_ftrace_update_code() from its own version to use
the generic default functionality (without stop_machine -- our
instructions are properly aligned and the replacements atomic).

With this we gain error checking and the much-needed function_trace_op
handling.

Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:54 +11:00
Michael Ellerman
336a7b5dd8 powerpc/module: Create a special stub for ftrace_caller()
In order to support the new -mprofile-kernel ABI, we need to be able to
call from the module back to ftrace_caller() (in the kernel) without
using the module's r2. That is because the function in this module which
is calling ftrace_caller() may not have setup r2, if it doesn't
otherwise need it (ie. it accesses no globals).

To make that work we add a new stub which is used for calling
ftrace_caller(), which uses the kernel toc instead of the module toc.

Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:54 +11:00
Michael Ellerman
f17c4e01e9 powerpc/module: Mark module stubs with a magic value
When a module is loaded, calls out to the kernel go via a stub which is
generated at runtime. One of these stubs is used to call _mcount(),
which is the default target of tracing calls generated by the compiler
with -pg.

If dynamic ftrace is enabled (which it typically is), another stub is
used to call ftrace_caller(), which is the target of tracing calls when
ftrace is actually active.

ftrace then wants to disable the calls to _mcount() at module startup,
and enable/disable the calls to ftrace_caller() when enabling/disabling
tracing - all of these it does by patching the code.

As part of that code patching, the ftrace code wants to confirm that the
branch it is about to modify, is in fact a call to a module stub which
calls _mcount() or ftrace_caller().

Currently it does that by inspecting the instructions and confirming
they are what it expects. Although that works, the code to do it is
pretty intricate because it requires lots of knowledge about the exact
format of the stub.

We can make that process easier by marking the generated stubs with a
magic value, and then looking for that magic value. Altough this is not
as rigorous as the current method, I believe it is sufficient in
practice.

Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:53 +11:00
Michael Ellerman
136cd3450a powerpc/module: Only try to generate the ftrace_caller() stub once
Currently we generate the module stub for ftrace_caller() at the bottom
of apply_relocate_add(). However apply_relocate_add() is potentially
called more than once per module, which means we will try to generate
the ftrace_caller() stub multiple times.

Although the current code deals with that correctly, ie. it only
generates a stub the first time, it would be clearer to only try to
generate the stub once.

Note also on first reading it may appear that we generate a different
stub for each section that requires relocation, but that is not the
case. The code in stub_for_addr() that searches for an existing stub
uses sechdrs[me->arch.stubs_section], ie. the single stub section for
this module.

A cleaner approach is to only generate the ftrace_caller() stub once,
from module_finalize(). Although the original code didn't check to see
if the stub was actually generated correctly, it seems prudent to add a
check, so do that. And an additional benefit is we can clean the ifdefs
up a little.

Finally we must propagate the const'ness of some of the pointers passed
to module_finalize(), but that is also an improvement.

Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-07 14:53:53 +11:00