[ Upstream commit 3de0f2627e ]
Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.
One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:
WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
RIP: 0010:regulator_unregister
Call Trace:
<TASK>
regulator_unregister
devres_release_group
i2c_device_remove
device_release_driver_internal
bus_remove_device
device_del
device_unregister
x86_android_tablet_remove
On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.
On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.
But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.
Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.
For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-1-hdegoede@redhat.com
[ Resolve minor conflicts ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be765b292 ]
Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.
Add a quirk to handle this.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec61f0bb4f ]
Some Alienware devices have a key that locks/unlocks the Meta key. This
key triggers a WMI event that should be ignored by the kernel, as it's
handled by internally the firmware.
There is no known way of changing this default behavior. The firmware
would lock/unlock the Meta key, regardless of how the event is handled.
Tested on an Alienware x15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154441.6663-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a36b8b84ac ]
Fixes the following error:
dell_smbios: Unable to run on non-Dell system
Which is triggered after dell-wmi driver fails to initialize on
Alienware systems, as it depends on dell-smbios.
This effectively extends dell-wmi, dell-smbios and dcdbas support to
Alienware devices, that might share some features of the SMBIOS intereface
calling interface with other Dell products.
Tested on an Alienware X15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154023.6149-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bceec87a73 ]
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.
Link: https://lore.kernel.org/platform-driver-x86/c588ff5d-3e04-4549-9a86-284b9b4419ba@amd.com
Fixes: 3d7d407dfb ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241028180241.1341624-1-bugfood-ml@fatooh.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7990957fa upstream.
Some machines like the Dell G15 5155 emit WMI events when
suspending/resuming. Ignore those WMI events.
Tested-by: siddharth.manthan@gmail.com
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241014220529.397390-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a561509b41 ]
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f7d0f5fd8 ]
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 6f7d0f5fd8)
[Harshit: CVE-2024-26836; Resolve conflicts due to missing commit:
318d97849f ("platform/x86: think-lmi: Add bulk save feature") which is
not in 6.6.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fae3129c0 ]
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba014120 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26 ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b57d33a6f ]
Create a platform_device from module_init() and change
x86_android_tablet_init() / cleanup() into platform_device
probe() and remove() functions.
This is a preparation patch for refactoring x86_android_tablet_get_gpiod()
to no longer use gpiolib private functions like gpiochip_find().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-6-hdegoede@redhat.com
Stable-dep-of: 2fae3129c0 ("platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7d59ac07cc upstream.
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d9dca21570 ]
While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed'
warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify()
at probe time to get the initial tablet-mode-switch state and the key-code
lenovo_ymc_notify() reads from the firmware is not initialized at probe
time yet on the Lenovo 14ARB7.
The hardware/firmware does an ACPI notify on the WMI device itself when
it initializes the tablet-mode-switch state later on.
Add 0x0 YMC state to the sparse keymap to silence the warning.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.1724340562.git.soyer@irl.hu
[hdegoede@redhat.com: Reword commit message]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c11619af35 ]
Add touschscreen info for the nanote next (UMPC-03-SR).
After checking with multiple owners the DMI info really is this generic.
Signed-off-by: Ckath <ckath@yandex.ru>
Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3379eca24 ]
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240825132415.8307-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 33297cef31 upstream.
Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value, allocate 1 entry extra.
Also make the SQTY <-> SINF package count mismatch error more verbose
to help debugging similar issues in the future.
This fixes the panasonic-laptop driver failing to probe() on some
devices with the following errors:
[ 3.958887] SQTY reports bad SINF length SQTY: 37 SINF-pkg-count: 38
[ 3.958892] Couldn't retrieve BIOS data
[ 3.983685] Panasonic Laptop Support - With Macros: probe of MAT0019:00 failed with error -5
Fixes: 709ee531c1 ("panasonic-laptop: add Panasonic Let's Note laptop extras driver v0.94")
Cc: stable@vger.kernel.org
Tested-by: James Harmison <jharmison@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f52e98d16e upstream.
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.
Fixes: e424fb8cc4 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed235163c3 ]
Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-3-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c8e022567 ]
Add SAM client device nodes for the Surface Pro 10. It seems to use the
same SAM client devices as the Surface Pro 9, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-2-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffc17e1479 ]
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c7df6645 ]
Framework Laptops have ACPI code which accesses the MEC memory. It
uses an AML mutex to prevent concurrent access. But the cros_ec_lpc
driver was not aware of this mutex. The ACPI code and LPC driver both
attempted to talk to the EC at the same time, messing up communication
with the EC.
Allow the LPC driver MEC code to find and use the AML mutex.
Tested-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Ben Walsh <ben@jubnut.com>
Link: https://lore.kernel.org/r/20240605063351.14836-3-ben@jubnut.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc923d594d ]
There is a small window in ssam_serial_hub_probe() where the controller
is initialized but has not been started yet. Specifically, between
ssam_controller_init() and ssam_controller_start(). Any failure in this
window, for example caused by a failure of serdev_device_open(),
currently results in an incorrect warning being emitted.
In particular, any failure in this window results in the controller
being destroyed via ssam_controller_destroy(). This function checks the
state of the controller and, in an attempt to validate that the
controller has been cleanly shut down before we try and deallocate any
resources, emits a warning if that state is not SSAM_CONTROLLER_STOPPED.
However, since we have only just initialized the controller and have not
yet started it, its state is SSAM_CONTROLLER_INITIALIZED. Note that this
is the only point at which the controller has this state, as it will
change after we start the controller with ssam_controller_start() and
never revert back. Further, at this point no communication has taken
place and the sender and receiver threads have not been started yet (and
we may not even have an open serdev device either).
Therefore, it is perfectly safe to call ssam_controller_destroy() with a
state of SSAM_CONTROLLER_INITIALIZED. This, however, means that the
warning currently being emitted is incorrect. Fix it by extending the
check.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811124645.246016-1-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a76dbb36 ]
Perform additional validation prior to loading IFS image.
Error out if the size of the file being loaded doesn't match the size
specified in the header.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-6-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3114f77e94 ]
If the IFS scan test exits prematurely due to a timeout before
completing a single run, the union ifs_status remains uninitialized,
leading to incorrect test status reporting. To prevent this, always
initialize the union ifs_status to zero.
Fixes: 2b40e654b7 ("platform/x86/intel/ifs: Add scan test support")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240730155930.1754744-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72b96ee29e ]
Width of chunk related bitfields is ACTIVATE_SCAN and SCAN_STATUS MSRs
are different in newer IFS generation compared to gen0.
Make changes to scan test flow such that MSRs are populated
appropriately based on the generation supported by hardware.
Account for the 8/16 bit MSR bitfield width differences between gen0 and
newer generations for the scan test trace event too.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-5-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 3114f77e94 ("platform/x86/intel/ifs: Initialize union ifs_status to zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97a5e801b3 ]
IFS generation number is reported via MSR_INTEGRITY_CAPS. As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.
Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 3114f77e94 ("platform/x86/intel/ifs: Initialize union ifs_status to zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit df615907f1 upstream.
The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.
The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.
Fixes: f74c7557ed ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure")
Cc: stable@vger.kernel.org
Signed-off-by: Patryk Duda <patrykd@google.com>
Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4d430db17 upstream.
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b27ea27955 ]
On the LG Gram 16Z90S, the WMAB and WMBB ACPI methods are not mapped
under \XINI, but instead are mapped under \_SB.XINI.
The reason for this is that the LGEX0820 ACPI device used by this
driver is mapped at \_SB.XINI, so the ACPI methods where moved as well
to appear below the LGEX0820 ACPI device.
Fix this by using the ACPI handle from the ACPI device when evaluating
both methods.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218901
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58a54f27a0 ]
The LGEX0815 ACPI device id is used for handling hotkey events, but
this functionality is already handled by the wireless-hotkey driver.
The LGEX0820 ACPI device id however is used to manage various
platform features using the WMAB/WMBB ACPI methods. Use this ACPI
device id to avoid blocking the wireless-hotkey driver from probing.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 413c204595 ]
The rfkill hotkey handling is already provided by the wireless-hotkey
driver. Remove the now unnecessary rfkill hotkey handling to avoid
duplicating functionality.
The ACPI notify handler still prints debugging information when
receiving ACPI notifications to aid in reverse-engineering.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151e78a0b8 ]
The LGEX0815 ACPI device is used by the "LG Airplane Mode Button"
Windows driver for handling rfkill requests. When the ACPI device
receives an 0x80 ACPI notification, an rfkill event is to be
send to userspace.
Add support for the LGEX0815 ACPI device to the driver.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d56fbfbaf5 ]
Add check for the return value of platform_device_add_resources() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240605032745.2916183-1-nichen@iscas.ac.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b6e02c6b03 upstream.
In order to use toshiba_dmi_quirks[] together with the standard DMI
matching functions, it must be terminated by a empty entry.
Since this entry is missing, an array out-of-bounds access occurs
every time the quirk list is processed.
Fix this by adding the terminating empty entry.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407091536.8b116b3d-lkp@intel.com
Fixes: 3cb1f40dfd ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240709143851.10097-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3050052613 ]
The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e527a61272 upstream.
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <kmal@cock.li>
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
Tested-by: kemal <kmal@cock.li>
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240701194539.348937-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c6370e660 ]
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().
- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
enough to avoid a race with any dependent drivers.
- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
unset BARs going forward.
- Return error values from p2sb_fs_init() so that the 'initcall_debug'
cmdline arg provides useful data.
Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23f1d8b47d ]
The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.
As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1981b296f8 ]
When reading token data from sysfs on my Inspiron 3505, the token
locations and values are wrong. This happens because match_attribute()
blindly assumes that all entries in da_tokens have an associated
entry in token_attrs.
This however is not true as soon as da_tokens[] contains zeroed
token entries. Those entries are being skipped when initialising
token_attrs, breaking the core assumption of match_attribute().
Fix this by defining an extra struct for each pair of token attributes
and use container_of() to retrieve token information.
Tested on a Dell Inspiron 3050.
Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240528204903.445546-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2fbe479c00 upstream.
Commit 47ea0ddb1f ("platform/chrome: cros_ec_lpc: Separate host
command and irq disable") re-ordered the resume sequence. Before that
change, cros_ec resume sequence is:
1) Enable IRQ
2) Send resume event
3) Handle events during suspend
After commit 47ea0ddb1f ("platform/chrome: cros_ec_lpc: Separate host
command and irq disable"), cros_ec resume sequence is:
1) Enable IRQ
2) Handle events during suspend
3) Send resume event.
This re-ordering leads to delayed handling of any events queued between
items 2) and 3) with the updated sequence. Also in certain platforms, EC
skips triggering interrupt for certain events eg. mkbp events until the
resume event is received. Such events are stuck in the host event queue
indefinitely. This change puts back the original order to avoid any
delay in handling the pending events.
Fixes: 47ea0ddb1f ("platform/chrome: cros_ec_lpc: Separate host command and irq disable")
Cc: <stable@vger.kernel.org>
Cc: Lalith Rajendran <lalithkraj@chromium.org>
Cc: <chrome-platform@lists.linux.dev>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Link: https://lore.kernel.org/r/20240429121343.v2.1.If2e0cef959f1f6df9f4d1ab53a97c54aa54208af@changeid
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db643cb7eb upstream.
If none of the clusters are added because of some error, fail to load
driver without presenting root domain. In this case root domain will
present invalid data.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 01c10f88c9 ("platform/x86/intel-uncore-freq: tpmi: Provide cluster level control")
Cc: <stable@vger.kernel.org> # 6.5+
Link: https://lore.kernel.org/r/20240415215210.2824868-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2920141fc1 upstream.
When tpmi_process_info() returns error, fail to load the driver.
This can happen if call to ioremap() returns error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # v6.3+
Link: https://lore.kernel.org/r/20240423204619.3946901-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e397c56429 ]
hotkey_exit() already takes the mutex around the hotkey_poll_stop_sync()
call, but not around the other calls.
commit 38831eaf7d ("platform/x86: thinkpad_acpi: use lockdep
annotations") has added lockdep_assert_held() checks to various hotkey
functions.
These lockdep_assert_held() checks fail causing WARN() backtraces in
dmesg due to missing locking in hotkey_exit(), fix this.
Fixes: 38831eaf7d ("platform/x86: thinkpad_acpi: use lockdep annotations")
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c748a6d77c ]
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 974afccd37 ("leds: pwm: Disable PWM when going to suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 515a3c3a54 ]
Add Grand Ridge (ATOM_CRESTMONT) to hpm_cpu_ids, so that MSR 0x54 can be
used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240422212222.3881606-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c2d38c4d ]
Add Granite Rapids-D to hpm_cpu_ids, so that MSR 0x54 can be used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415212853.2820470-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f609e7b1b4 ]
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
