On bcm63xx SoCs there are registers that control the PHYs in
the GPIO controller. Allow the b53 driver to access them
by passing in the syscon through the device tree.
Add a structure to describe the ephy control register
and add register info for bcm63268.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-5-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description for bcm63xx gpio-ctrl phandle which allows
access to registers that control phy functionality.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724035300.20497-3-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy enable/disable to b53 ops to be called when
enabling/disabling ports.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250724035300.20497-2-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up the inet_addr union by removing unused fields that are
redundant with existing members:
This simplifies the union structure while maintaining all necessary
functionality for both IPv4 and IPv6 address handling.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netconsole_ref-v3-1-8be9b24e4a99@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of the way read access support is implemented, read access
interruptions are only triggered at privilege levels 2 and 3. The
kernel executes at privilege level 0, so __get_user() never triggers
a read access interruption (code 26). Thus, it is currently possible
for user code to access a read protected address via a system call.
Fix this by probing read access rights at privilege level 3 (PRIV_USER)
and setting __gu_err to -EFAULT (-14) if access isn't allowed.
Note the cmpiclr instruction does a 32-bit compare because COND macro
doesn't work inside asm.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
We use load and stbys,e instructions to trigger memory reference
interruptions without writing to memory. Because of the way read
access support is implemented, read access interruptions are only
triggered at privilege levels 2 and 3. The kernel and gateway
page execute at privilege level 0, so this code never triggers
a read access interruption. Thus, it is currently possible for
user code to execute a LWS compare and swap operation at an
address that is read protected at privilege level 3 (PRIV_USER).
Fix this by probing read access rights at privilege level 3 and
branching to lws_fault if access isn't allowed.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
I have observed warning to occassionally trigger.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
When a PTE is changed, we need to flush the PTE. set_pte_at()
was lost in the folio update. PA-RISC version is the same as
the generic version.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
The local name used in cache.c conflicts the declaration in
include/asm-generic/tlb.h.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
Because of the way the _PAGE_READ is handled in the parisc PTE, an
access interruption is not generated when the kernel reads from a
region where the _PAGE_READ is zero. The current code was written
assuming read access faults would also occur in the kernel.
This change adds user access checks to raw_copy_from_user(). The
prober_user() define checks whether user code has read access to
a virtual address. Note that page faults are not handled in the
exception support for the probe instruction. For this reason, we
precede the probe by a ldb access check.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
The following testcase exposed a problem with our read access checks
in get_user() and raw_copy_from_user():
#include <stdint.h>
#include <stddef.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/types.h>
int main(int argc, char **argv)
{
unsigned long page_size = sysconf(_SC_PAGESIZE);
char *p = malloc(3 * page_size);
char *p_aligned;
/* initialize memory region. If not initialized, write syscall below will correctly return EFAULT. */
if (1)
memset(p, 'X', 3 * page_size);
p_aligned = (char *) ((((uintptr_t) p) + (2*page_size - 1)) & ~(page_size - 1));
/* Drop PROT_READ protection. Kernel and userspace should fault when accessing that memory region */
mprotect(p_aligned, page_size, PROT_NONE);
/* the following write() should return EFAULT, since PROT_READ was dropped by previous mprotect() */
int ret = write(2, p_aligned, 1);
if (!ret || errno != EFAULT)
printf("\n FAILURE: write() did not returned expected EFAULT value\n");
return 0;
}
Because of the way _PAGE_READ is handled, kernel code never generates
a read access fault when it access a page as the kernel privilege level
is always less than PL1 in the PTE.
This patch reworks the comments in the make_insert_tlb macro to try
to make this clearer.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.12+
For building a 64-bit kernel, both 32-bit and 64-bit VDSO binaries
are built, so both 32-bit and 64-bit compilers (and tools) should be
in the PATH environment variable.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.3+
Many of the original rtla tests included durations of 1 minute and 30
seconds. Experience has shown this is unnecessary, since 10 seconds as
waiting time for samples to appear.
Change duration of all rtla tests to at most 10 seconds. This speeds up
testing significantly.
Before:
$ make check
All tests successful.
Files=3, Tests=54, 536 wallclock secs
( 0.03 usr 0.00 sys + 20.31 cusr 22.02 csys = 42.36 CPU)
Result: PASS
After:
$ make check
...
All tests successful.
Files=3, Tests=54, 196 wallclock secs
( 0.03 usr 0.01 sys + 20.28 cusr 20.68 csys = 41.00 CPU)
Result: PASS
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a bunch of tests covering most of both --on-threshold and --on-end.
Parts sensitive to implementation of hist/top are tested for both.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add argument to the check command in the test suite that takes a regular
expression that the output of rtla command is checked against. This
allows testing for specific information in rtla output in addition
to checking the return value.
Two minor improvements are included: running rtla with "eval" so that
arguments with spaces can be passed to it via shell quotations, and
the stdout of pushd and popd is suppressed to clean up the test output.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at the
end of the measurement.
For example:
$ rtla timerlat hist -d 5s --on-end trace
will save the trace output at the end.
All actions supported by --on-threshold are also supported by --on-end,
except for continue, which does nothing with --on-end.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce option to resume tracing after a latency threshold overflow.
The option is implemented as an action named "continue".
Example:
$ rtla timerlat top -q -T 200 -d 1s --on-threshold \
exec,command="echo Threshold" --on-threshold continue
Threshold
Threshold
Threshold
Timer Latency
...
The feature is supported for both hist and top. After the continue
action is executed, processing of the list of actions is stopped and
tracing is resumed.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, rtla-timerlat BPF program uses a global variable stored in a
.bss section to store whether tracing has been stopped.
Move the information to a separate map, so that it is easily writable
from userspace, and add a function that clears the value, resuming
tracing after it has been stopped.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Extend the functionality provided by the -t/--trace option, which
triggers saving the contents of a tracefs buffer after tracing is
stopped, to support implementing arbitrary actions.
A new option, --on-threshold, is added, taking an argument
that further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename.
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process.
- shell,command=<command>: Execute shell command.
Multiple actions may be specified and will be executed in order,
including multiple actions of the same type. Trace output requested via
-t and -a now adds a trace action to the end of the list.
If an action fails, the following actions are not executed. For
example, this command:
$ rtla timerlat -T 20 --on-threshold trace \
--on-threshold shell,command="grep ipi_send timerlat_trace.txt" \
--on-threshold signal,num=2,pid=parent
will send signal 2 (SIGINT) to parent process, but only if saved trace
contains the text "ipi_send".
This way, the feature can be used for flexible reactions on latency
spikes, and allows combining rtla with other tooling like perf.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After the introduction of BPF-based sample collection, rtla-timerlat
effectively runs in one of three modes:
- Pure BPF mode, with tracefs only being used to set up the timerlat
tracer. Sample processing and stop on threshold are handled by BPF.
- tracefs mode. BPF is unsupported or kernel is lacking the necessary
trace event (osnoise:timerlat_sample). Stop on theshold is handled by
timerlat tracer stopping tracing in all instances.
- BPF/tracefs mixed mode - BPF is used for sample collection for top or
histogram, tracefs is used for trace output and/or auto-analysis. Stop
on threshold is handled both through BPF program, which stops sample
collection for top/histogram and wakes up rtla, and by timerlat
tracer, which stops tracing for trace output/auto-analysis instances.
Add enum timerlat_tracing_mode, with three values:
- TRACING_MODE_BPF
- TRACING_MODE_TRACEFS
- TRACING_MODE_MIXED
Those represent the modes described above. A field of this type is added
to struct timerlat_params, named "mode", replacing the no_bpf variable.
params->mode is set in timerlat_{top,hist}_parse_args to
TRACING_MODE_BPF or TRACING_MODE_MIXED based on whether trace output
and/or auto-analysis is requested. timerlat_{top,hist}_main then checks
if BPF is not unavailable or disabled, in that case, it sets
params->mode to TRACING_MODE_TRACEFS.
A condition is added to timerlat_apply_config that skips setting
timerlat tracer thresholds if params->mode is TRACING_MODE_BPF (those
are unnecessary, since they only turn off tracing, which is already
turned off in that case, since BPF is used to collect samples).
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
Fixes: 21b688dabe ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Larysch <fl@n621.de>
Link: https://patch.msgid.link/20250723222250.13960-1-fl@n621.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i915:
- Fix DP 2.7 Gbps DP_LINK_BW value on g4x
- Fix return value on intel_atomic_commit_fence_wait
xe:
- Fix build without debugfs
-----BEGIN PGP SIGNATURE-----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=rf5N
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-07-26' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes (part 2) from Dave Airlie:
"Just the follow up fixes for i915 and xe, all pretty minor.
i915:
- Fix DP 2.7 Gbps DP_LINK_BW value on g4x
- Fix return value on intel_atomic_commit_fence_wait
xe:
- Fix build without debugfs"
* tag 'drm-fixes-2025-07-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Fix build without debugfs
drm/i915/display: Fix dma_fence_wait_timeout() return value handling
drm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4x
Like others, the MediaTek DisplayPort controller provides an
auxiliary bus: import the common dp-aux-bus.yaml in this binding
to allow specifying an aux-bus subnode.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When KSZ8863 support was first added to KSZ driver the RX drop MIB
counter was somehow defined as 0x105. The TX drop MIB counter
starts at 0x100 for port 1, 0x101 for port 2, and 0x102 for port 3, so
the RX drop MIB counter should start at 0x103 for port 1, 0x104 for
port 2, and 0x105 for port 3.
There are 5 ports for KSZ8895, so its RX drop MIB counter starts at
0x105.
Fixes: 4b20a07e10 ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250723030403.56878-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert fsl,vf610-mscm-ir.txt to yaml format.
Additional changes:
- remove label at example dts.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724190342.1321632-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add fsl,icoll.yaml for i.MX23 and i.MX28.
Also add a generic fallback compatible string "fsl,icoll" for legacy
devices, which have existed for over 15 years.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724164624.1271661-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add missing description for AMD/Xilinx interrupt controller. The binding is
used by Microblaze before dt-binding even existed but never been
documented properly.
IP acts as primary interrupt controller on Microblaze systems or can be
used as secondary interrupt controller on ARM based systems like Zynq,
ZynqMP, Versal or Versal Gen 2. Also as secondary interrupt controller on
Microblaze-V (Risc-V) systems.
Over the years IP exists in multiple variants based on attached bus as OPB,
PLB or AXI that's why generic filename is used.
Property xlnx,kind-of-intr is in hex because every bit position corresponds
to interrupt line. Controller support mixing edge or level interrupts
together and this is the property which distinguish them.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2b9d4a3a693f501d420da88b8418732ba9def877.1753354675.git.michal.simek@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The local variable i is used to iterate over unsigned
values. The lower bound of the loop is set to 0. While
the upper bound is cgx->lmac_count, where they lmac_count is
an u8. So the theoretical upper bound is 255.
As is, GCC can't see this range of values and warns that
a formatted string, which includes the %d representation of i,
may overflow the buffer provided.
GCC 15.1.0 says:
.../cgx.c: In function 'cgx_lmac_init':
.../cgx.c:1737:49: warning: '%d' directive writing between 1 and 11 bytes into a region of size between 4 and 6 [-Wformat-overflow=]
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~
.../cgx.c:1737:37: note: directive argument in the range [-2147483641, 254]
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~~~~~~~~~~~~~~
.../cgx.c:1737:17: note: 'sprintf' output between 12 and 24 bytes into a destination of size 16
1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Empirically, changing the type of i from (signed) int to unsigned int
addresses this problem. I assume by allowing GCC to see the range of
values described above.
Also update the format specifiers for the integer values in the string
in question from %d to %u. This seems appropriate as they are now both
unsigned.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250724-octeontx2-af-unsigned-v1-1-c745c106e06f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: track more fallback cases
This series has two patches linked to fallback to TCP:
- Patch 1: additional MIB counters for remaining error code paths around
fallback
- Patch 2: remove dedicated pr_debug() linked to fallback now that
everything should be covered by dedicated MIB counters.
====================
Link: https://patch.msgid.link/20250723-net-next-mptcp-track-fallbacks-v1-0-a83cce08f2d5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can now track fully the fallback status of a given connection via the
relevant mibs, the mentioned helper is redundant. Remove it completely.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250723-net-next-mptcp-track-fallbacks-v1-2-a83cce08f2d5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the mibs required to cover the few possible fallback causes still
lacking suck info.
Move the relevant mib increment into the fallback helper, so that no
eventual future fallback operation will miss a paired mib increment.
Additionally track failed fallback via its own mib, such mib is
incremented only when a fallback mandated by the protocol fails - due to
racing subflow creation.
While at the above, rename an existing helper to reduce long lines
problems all along.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250723-net-next-mptcp-track-fallbacks-v1-1-a83cce08f2d5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, USB CDC devices that do not use MDIO to get link status have
their duplex mode set to half-duplex by default. However, since the CDC
specification does not define a duplex status, this can be misleading.
This patch changes the default to DUPLEX_UNKNOWN in the absence of MII,
which more accurately reflects the state of the link and avoids implying
an incorrect or error state.
Link: https://lore.kernel.org/all/20250723152151.70a8034b@kernel.org/
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250724013133.1645142-1-yicongsrfy@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cosmin reports the following locking issue:
# BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:275
# dump_stack_lvl+0x4f/0x60
# __might_resched+0xeb/0x140
# mutex_lock+0x1a/0x40
# dev_set_promiscuity+0x26/0x90
# __dev_set_promiscuity+0x85/0x170
# __dev_set_rx_mode+0x69/0xa0
# dev_uc_add+0x6d/0x80
# vlan_dev_open+0x5f/0x120 [8021q]
# __dev_open+0x10c/0x2a0
# __dev_change_flags+0x1a4/0x210
# netif_change_flags+0x22/0x60
# do_setlink.isra.0+0xdb0/0x10f0
# rtnl_newlink+0x797/0xb00
# rtnetlink_rcv_msg+0x1cb/0x3f0
# netlink_rcv_skb+0x53/0x100
# netlink_unicast+0x273/0x3b0
# netlink_sendmsg+0x1f2/0x430
Which is similar to recent syzkaller reports in [0] and [1] and triggers
because macsec does not advertise IFF_UNICAST_FLT although it has proper
ndo_set_rx_mode callback that takes care of pushing uc/mc addresses
down to the real device.
In general, dev_uc_add call path is problematic for stacking
non-IFF_UNICAST_FLT because we might grab netdev instance lock under
addr_list_lock spinlock, so this is not a systemic fix.
0: https://lore.kernel.org/netdev/686d55b4.050a0220.1ffab7.0014.GAE@google.com
1: https://lore.kernel.org/netdev/68712acf.a00a0220.26a83e.0051.GAE@google.com/
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: Cosmin Ratiu <cratiu@nvidia.com>
Tested-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723224715.1341121-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a statistical item to count the number of reset failures.
This statistical item can be queried using ethtool -S or
reported through diagnose information.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250723074826.2756135-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_reporter_rx_timeout() is currently invoked synchronously
in the driver's open error flow. This causes the thread holding
priv->state_lock to attempt acquiring the devlink lock, which
can result in a circular dependency with other devlink operations.
For example:
- Devlink health diagnose flow:
- __devlink_nl_pre_doit() acquires the devlink lock.
- devlink_nl_health_reporter_diagnose_doit() invokes the
driver's diagnose callback.
- mlx5e_rx_reporter_diagnose() then attempts to acquire
priv->state_lock.
- Driver open flow:
- mlx5e_open() acquires priv->state_lock.
- If an error occurs, devlink_health_reporter may be called,
attempting to acquire the devlink lock.
To prevent this circular locking scenario, defer the RX timeout
recovery by scheduling it via a workqueue. This ensures that the
recovery work acquires locks in a consistent order: first the
devlink lock, then priv->state_lock.
Additionally, make the recovery work acquire the netdev instance
lock to safely synchronize with the open/close channel flows,
similar to mlx5e_tx_timeout_work. Repeatedly attempt to acquire
the netdev instance lock until it is taken or the target RQ is no
longer active, as indicated by the MLX5E_STATE_CHANNELS_ACTIVE bit.
Fixes: 32c57fb268 ("net/mlx5e: Report and recover from rx timeout")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1753256672-337784-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating the PBMC register, we read its current value,
modify desired fields, then write it back.
The port_buffer_size field within PBMC is Read-Only (RO).
If this RO field contains a non-zero value when read,
attempting to write it back will cause the entire PBMC
register update to fail.
This commit ensures port_buffer_size is explicitly cleared
to zero after reading the PBMC register but before writing
back the modified value.
This allows updates to other fields in the PBMC register to succeed.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1753256672-337784-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check for ns < 0 is always false because variable ns is a u32 which
is not a signed type. Fix this by making ns a s32 type.
Fixes: cef9991e04 ("spi: Add Amlogic SPISG driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250725171701.839927-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously arch_support_sort_key and arch_perf_header_entry used a
weak symbol to compile as appropriate for x86 and powerpc. A
limitation to this is that the handling of a data file could vary in
cross-platform development. Change to using the perf_env of the
current session to determine the architecture kind and set the sort
key and header entries as appropriate.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-23-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
test__x86_sample_parsing is identical to test__sample_parsing except
it explicitly tested PERF_SAMPLE_WEIGHT_STRUCT. Now the parsing code
is common move the PERF_SAMPLE_WEIGHT_STRUCT to the common sample
parsing test and remove the x86 version.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-22-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
