Under the previous commit's assumption that FIPS isn't
supported by hardware, we don't need to modify the
cipher suite list, but just need to use the software
one instead of the driver's in this case, so clean up
the code.
Also fix it to exclude TKIP in this case, since that's
also dependent on RC4.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.cff427e8f8a5.I744d1ea6a37e3ea55ae8bc3e770acee734eff268@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When fips_enabled is set, don't send any keys to the driver
(including possibly WoWLAN KEK/KCK material), assuming that
no device exists with the necessary certifications. If this
turns out to be false in the future, we can add a HW flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.e5eebc2b19d8.I968ef8c9ffb48d464ada78685bd25d22349fb063@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the paths that could return an error are considered
misuses of the function and WARN already, and none of
the callers ever check the return value. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.5b436ee3c20c.Ieff61ec510939adb5fe6da4840557b649b3aa820@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a link has no chanctx, indicating it is an inactive link
that we tracked CSA for, then attempting to unreserve the
reserved chanctx will throw a warning and fail, since there
never was a reserved chanctx. Skip the unreserve.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.022192f4b1ae.Ib58156ac13e674a9f4d714735be0764a244c0aae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: 788838ebe8 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250709111339.25360-2-fourier.thomas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit e3eac9f32e ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by").
This really has been a completely failed experiment. There were
no actual bugs found, and yet at this point we already have four
"fixes" to it, with nothing to show for but code churn, and it
never even made the code any safer.
In all of the cases that ended up getting "fixed", the structure
is also internally inconsistent after the n_channels setting as
the channel list isn't actually filled yet. You cannot scan with
such a structure, that's just wrong. In mac80211, the struct is
also reused multiple times, so initializing it once is no good.
Some previous "fixes" (e.g. one in brcm80211) are also just setting
n_channels before accessing the array, under the assumption that the
code is correct and the array can be accessed, further showing that
the whole thing is just pointless when the allocation count and use
count are not separate.
If we really wanted to fix it, we'd need to separately track the
number of channels allocated and the number of channels currently
used, but given that no bugs were found despite the numerous syzbot
reports, that'd just be a waste of time.
Remove the __counted_by() annotation. We really should also remove
a number of the n_channels settings that are setting up a structure
that's inconsistent, but that can wait.
Reported-by: syzbot+e834e757bd9b3d3e1251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e834e757bd9b3d3e1251
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Link: https://patch.msgid.link/20250714142130.9b0bbb7e1f07.I09112ccde72d445e11348fc2bef68942cb2ffc94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix an ath12k performance regression introduce in v6.16-rc1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaHUQXwAKCRAsFbugiYzL
ewsPAQCgAgDT3Fl/I+Bs5B35QbGvAwAooHNnLOnglvI8FTmBDAD+KlpZwKX0KBIK
BT5k1yNw1KxlEEsqgX8KWd9wdR07uAg=
=2H7l
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20250714' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.16-rc7
Fix an ath12k performance regression introduce in v6.16-rc1
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Forcibly disable KCSAN for the sev-nmi.c source file, which only
contains functions annotated as 'noinstr' but is emitted with calls to
KCSAN instrumentation nonetheless. E.g.,
vmlinux.o: error: objtool: __sev_es_nmi_complete+0x58: call to __kcsan_check_access() leaves .noinstr.text section
make[2]: *** [/usr/local/google/home/ardb/linux/scripts/Makefile.vmlinux_o:72: vmlinux.o] Error 1
Fixes: a3cbbb4717 ("x86/boot: Move SEV startup code into startup/")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250714073402.4107091-2-ardb+git@google.com
Fix checkpatch error "CHECK: Blank lines aren't necessary
before a close brace '}' in odm_DIG.c:374.
Signed-off-by: Andrei Zeucianu <benjaminpotron@gmail.com>
Link: https://lore.kernel.org/r/20250714134611.119442-1-benjaminpotron@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch error "CHECK: No space is necessary after a cast"
in sdio_intf.c:292
Signed-off-by: Alexandre Viard <xela@viard.dev>
Link: https://lore.kernel.org/r/20250714133238.67997-1-xela@viard.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch "WARNING: braces {} are not necessary for single statement
blocks" in rtl8723bs/os_dep/os_intfs.c:1207.
Signed-off-by: Vincent Caron <vcaron@bearstech.com>
Link: https://lore.kernel.org/r/20250714131743.343482-1-vcaron@bearstech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to Linux kernel coding style according to checkpatch :
CHECK: spaces required around that ':' (ctx:VxV)
Signed-off-by: Jonathan Dupart <jonathan+kernel@dupart.org>
Link: https://lore.kernel.org/r/20250714132343.1613229-1-jonathan+kernel@dupart.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch CHECK:
"Logical continuations should be on the previous line"
in firmware.c:123
Signed-off-by: Abhinav Krishna C K <me@abhy.me>
Link: https://lore.kernel.org/r/20250714134537.59218-1-me@abhy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses all instances of the checkpatch.pl warning
"CHECK: Alignment should match open parenthesis"
in this file.
Signed-off-by: Simon Chopin <schopin@ubuntu.com>
Link: https://lore.kernel.org/r/20250714133148.442401-1-schopin@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function Efuse_WordEnableDataWrite() defined in rtw_efuse.c is not
used. Remove the function and code it is calling, i.e. the function
pointer (*Efuse_WordEnableDataWrite) in struct hal_ops and the function
Hal_EfuseWordEnableDataWrite() to which it points.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250713100229.13917-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-8-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-7-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-6-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When restoring the default socket callbacks during a TLS handshake, we
need to acquire a write lock on sk_callback_lock. Previously, a read
lock was used, which is insufficient for modifying sk_user_data and
sk_data_ready.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Procedures for nvme-mpath IO accounting:
1) initialize nvme_request and clear flags;
2) set NVME_MPATH_IO_STATS and increase inflight counter when IO
started;
3) check NVME_MPATH_IO_STATS and decrease inflight counter when IO is
done;
However, for the case nvme_fail_nonready_command(), both step 1) and 2)
are skipped, and if old nvme_request set NVME_MPATH_IO_STATS and then
request is reused, step 3) will still be executed, causing inflight I/O
counter to be negative.
Fix the problem by clearing nvme_request in nvme_fail_nonready_command().
Fixes: ea5e5f42cd ("nvme-fabrics: avoid double completions in nvmf_fail_nonready_command")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_+dauobyYyP805t33WMJVzOWj=7+51p4_j9rA63D9sog@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This was originally added by commit 8695f060a0 ("nvme: all namespaces
in a subsystem must adhere to a common atomic write size") to check
the all controllers in a subsystem report the same atomic write size,
but the check wasn't quite correct and caused problems for devices
with multiple namespaces that report different LBA sizes. Commit
f46d273449 ("nvme: fix atomic write size validation") tried to fix
this, but then caused problems for namespace rediscovery after a
format with an LBA size change that changes the AWUPF value.
This drops the validation and essentially reverts those two commits while
keeping the cleanup that went in between the two. We'll need to figure
out how to properly check for the mouse trap that nvme left us, but for
now revert the check to keep devices working for users who couldn't care
less about the atomic write feature.
Fixes: 8695f060a0 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size")
Fixes: f46d273449 ("nvme: fix atomic write size validation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Size of ring buffer, as defined in uio_hv_generic driver, is no longer
fixed to 16 KB. This creates a problem in fcopy, since this size was
hardcoded. With the change in place to make ring sysfs node actually
reflect the size of underlying ring buffer, it is safe to get the size
of ring sysfs file and use it for ring buffer size in fcopy daemon.
Fix the issue of disparity in ring buffer size, by making it dynamic
in fcopy uio daemon.
Cc: stable@vger.kernel.org
Fixes: 0315fef2af ("uio_hv_generic: Align ring size to system page")
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/20250711060846.9168-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250711060846.9168-1-namjain@linux.microsoft.com>
Running as nested root on MSHV imposes a different requirement
for the pci-hyperv controller.
In this setup, the interrupt will first come to the L1 (nested) hypervisor,
which will deliver it to the appropriate root CPU. Instead of issuing the
RETARGET hypercall, issue the MAP_DEVICE_INTERRUPT hypercall to L1 to
complete the setup.
Rename hv_arch_irq_unmask() to hv_irq_retarget_interrupt().
Co-developed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com>
Move some of the logic of hv_irq_compose_irq_message() into
hv_map_msi_interrupt(). Make hv_map_msi_interrupt() a globally-available
helper function, which will be used to map PCI interrupts when running
in the root partition.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1752261532-7225-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-3-git-send-email-nunodasneves@linux.microsoft.com>
When running nested, these hypercalls must be sent to the L0 hypervisor
or VMBus will fail.
Remove hv_do_nested_hypercall() and hv_do_fast_nested_hypercall8()
altogether and open-code these cases, since there are only 2 and all
they do is add the nested bit.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com>
In addition to the function latency, it can measure events latencies.
Some kernel tracepoints are paired and it's menningful to measure how
long it takes between the two events. The latency is tracked for the
same thread.
Currently it only uses BPF to do the work but it can be lifted later.
Instead of having separate a BPF program for each tracepoint, it only
uses generic 'event_begin' and 'event_end' programs to attach to any
(raw) tracepoints.
$ sudo perf ftrace latency -a -b --hide-empty \
-e i915_request_wait_begin,i915_request_wait_end -- sleep 1
# DURATION | COUNT | GRAPH |
256 - 512 us | 4 | ###### |
2 - 4 ms | 2 | ### |
4 - 8 ms | 12 | ################### |
8 - 16 ms | 10 | ################ |
# statistics (in usec)
total time: 194915
avg time: 6961
max time: 12855
min time: 373
count: 28
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250714052143.342851-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
