With the introduction of the new object and its infrastructure, update the
doc to reflect that.
Link: https://patch.msgid.link/r/caa3ddc0d9bacf05c5b3e02c5f306ff3172cc54d.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For vIOMMU passing through HW resources to user space (VMs), allowing a VM
to control the passed through HW directly by accessing hardware registers,
add an mmap infrastructure to map the physical MMIO pages to user space.
Maintain a maple tree per ictx as a translation table managing mmappable
regions, from an allocated for-user mmap offset to an iommufd_mmap struct,
where it stores the real physical address range for io_remap_pfn_range().
Keep track of the lifecycle of the mmappable region by taking refcount of
its owner, so as to enforce user space to unmap the region first before it
can destroy its owner object.
To allow an IOMMU driver to add and delete mmappable regions onto/from the
maple tree, add iommufd_viommu_alloc/destroy_mmap helpers.
Link: https://patch.msgid.link/r/9a888a326b12aa5fe940083eae1156304e210fe0.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=4o0B
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.16-20250710' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Remove a pointless warning in the zcrx code
- Fix for MSG_RING commands, where the allocated io_kiocb
needs to be freed under RCU as well
- Revert the work-around we had in place for the anon inodes
pretending to be regular files. Since that got reworked
upstream, the work-around is no longer needed
* tag 'io_uring-6.16-20250710' of git://git.kernel.dk/linux:
Revert "io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well"
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
io_uring/zcrx: fix pp destruction warnings
The code dealing with the 0 terminated meta_formats array is a bit klunky
especially for the uvc_meta_v4l2_enum_formats() case.
Instead of 0 terminating add an unsigned int nmeta_formats member to struct
uvc_device and use that. This leads to slightly cleaner code.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Ricardo Ribalda <ribalda@chrium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org> # Camera with MSXU_CONTROL_METADATA
Link: https://lore.kernel.org/r/20250708104622.73237-2-hansg@kernel.org
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If the camera supports the MSXU_CONTROL_METADATA control, auto set the
MSXU_META quirk.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-5-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The UVC driver provides two metadata types V4L2_META_FMT_UVC, and
V4L2_META_FMT_D4XX. The only difference between the two of them is that
V4L2_META_FMT_UVC only copies PTS, SCR, size and flags, and
V4L2_META_FMT_D4XX copies the whole metadata section.
Now we only enable V4L2_META_FMT_D4XX for the Intel D4xx family of
devices, but it is useful to have the whole metadata payload for any
device where vendors include other metadata, such as the one described by
Microsoft:
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/mf-capture-metadata
This patch introduces a new format V4L2_META_FMT_UVC_MSXU_1_5, that is
identical to V4L2_META_FMT_D4XX.
Let the user enable this format with a quirk for now. This way they can
test if their devices provide useful metadata without rebuilding the
kernel. They can later contribute patches to auto-quirk their devices.
We will also work in methods to auto-detect devices compatible with this
new metadata format.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-4-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Right now, there driver supports devices with one or two metadata
formats. Prepare it to support more than two metadata formats.
This is achieved with the introduction of a new field `meta_formats`,
that contains the array of metadata formats supported by the device, in
the order expected by userspace.
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-3-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The documentation currently describes the UVC length field as the "length
of the rest of the block", which can be misleading. The driver limits the
data copied to a maximum of 12 bytes.
This change adds a clarifying sentence to the documentation to make this
restriction explicit.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-2-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Currently, the driver performs a length check of the metadata buffer
before the actual metadata size is known and before the metadata is
decided to be copied. This results in valid metadata buffers being
incorrectly marked as invalid.
Move the length check to occur after the metadata size is determined and
is decided to be copied.
Cc: stable@vger.kernel.org
Fixes: 088ead2552 ("media: uvcvideo: Add a metadata device node")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-1-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Instead of listing the IOCTLs that do not need to turn on the camera,
list the IOCTLs that need to turn it on. This makes the code more
maintainable.
This patch changes the behaviour for unsupported IOCTLs. Those IOCTLs
will not turn on the camera.
Suggested-by: Hans Verkuil <hans@jjverkuil.nl>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hans@hverkuil.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-7-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
video_translate_cmd() can be useful for drivers to convert between the
VIDIOC_*32 and VIDIOC_ defines. Let's export it.
Now that the function is exported, use this opportunity to rename the
function with the v4l2_ prefix, that is less ambiguous than video_
The VIDIOC_*32 defines are not accessible by the drivers, they live in
v4l2-compat-ioctl32.c.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-6-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If we subscribe to an event with V4L2_EVENT_SUB_FL_SEND_INITIAL, the
driver needs to report back some values that require the camera to be
powered on. But VIDIOC_SUBSCRIBE_EVENT is not part of the ioctls that
turn on the camera.
We could unconditionally turn on the camera during
VIDIOC_SUBSCRIBE_EVENT, but it is more efficient to turn it on only
during V4L2_EVENT_SUB_FL_SEND_INITIAL, which we believe is not a common
usecase.
To avoid a list_del if uvc_pm_get() fails, we move list_add_tail to the
end of the function.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Fixes: d1b618e795 ("media: uvcvideo: Do not turn on the camera for some ioctls")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-5-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The is_streaming field is used by modular PM to know if the device is
currently streaming or not.
With the transition to vb2 and fop helpers, we can use vb2 functions for
the same functionality. The great benefit is that vb2 already tracks the
streaming state for us.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-4-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
uvc_stop_streaming() is used for meta and video nodes. Split the function
in two to avoid confusion.
Use this opportunity to rename uvc_start_streaming() to
uvc_start_streaming_video(), as it is only called by the video nodes.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-3-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Most of the calls to uvc_queue_return_buffers() wrap the call with
spin_lock_irq()/spin_unlock_irq().
Rename uvc_queue_return_buffers to __uvc_queue_return_buffers to
indicate that this is the version that does not handle locks and create
a new version of the function that handles the lock.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-2-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When uvc was written the vb2 ioctl and file operation helpers didn't exist.
This patch switches uvc over to those helpers, which removes a lot of
boilerplate code and allows us to drop the 'privileges' scheme, since
that's now handled inside the vb2 helpers.
This makes it possible for uvc to fix the v4l2-compliance streaming tests:
warn: v4l2-test-formats.cpp(1075): Could not set fmt2
This patch introduces a change on behavior on the uvcdriver to be
aligned with the rest of the subsystem. Now S_INPUT, S_PARM and
S_FORMAT do no grant exclusive ownership of the device.
There are other side effects, some better than others:
- Locking is now more coarse than before, the queue is locked for almost
every ioctl.
- vidioc_querybuf() can now work when the queue is busy.
Future patches should look into the locking architecture of UVC to
remove one of stream->mutex or queue->mutex.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Co-developed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-1-250286570ee7@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
for the release. The Netlink fixes (on top of the tree) restore
operation of iw (WiFi CLI) which uses sillily small recv buffer,
and is the reason for this "emergency PR". The GRE multicast
fix also stands out among the user-visible regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=R36B
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmhw/bMACgkQEacuoBRx
13K1rA/+NEm8lx+u6rcXDMMoKPkEB9LHh/nYDBVd505A6ifPw+Ro9iT2AuI5eePp
S5EmyKB+Xmj0JSfqlYPzc90tZbw4xuKe1FoWuFlDgXKVjbL+lwGuGCUT7gORjNcO
M7CjHd2pw3W4NEEOrYqRiVfS8N/ZI3tAgh17igfvt8C8F0pAGMoPTwA0QXPft6B1
g/zkK5RjsNfKd/Ma/Xz+3RWOGGPXeMgj+5A1EFqHF5jPLSf7kpJhk33mp28Qu0jA
kWIsMDkOv3rFC7z89ygASr0a8VZTX8sGPmM5f9fqfr0vmzDI0mVPx5uGMWTkfGJp
P7qZtn/rxV5XUJy8IIJcX/NMjm5jtu6rbRh74koFlIccRg5FVqHdgrrqmEgINPCL
4Mp9tQBZGrJqm/oHyLhT5RUIBm4GrYJ7QXuQZLklrXcgKh0CYwXZCyvaj4xXJXRb
VPUldCvRauXQjVVHnjSIZxgovRnYfuj7n9/QfIAwoC26AqHYBQd19P1lcakQAJW8
JPyYpurP4KFG+20cE9qhaoMCSc/XpxkEKmSnD4ehd+rslIa4/XIORffrY7ONNTdT
rwmWe0i4yT79RsreC3IQz4cVUYgfVHN0qC05ef81rvNVNY39xzgI/2fqBweXwubz
j8Qxr4LGj/Le+lIdOehnr1TWu4l6DapzH0k21OhIZrG9PYLxuoo=
=2TYC
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: remove bouncing address for Nandor Han
gpio: of: initialize local variable passed to the .of_xlate() callback
gpiolib: fix performance regression when using gpio_chip_get_multiple()
Verify that number of partition maps isn't insanely high which can lead
to large allocation in udf_sb_alloc_partition_maps(). All partition maps
have to fit in the LVD which is in a single block.
Reported-by: syzbot+478f2c1a6f0f447a46bb@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Stop using the obsolete write_cache_pages and use writeback_iter directly.
Use the chance to refactor the inacb writeback code to not have a separate
writeback helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250711081036.564232-1-hch@lst.de
Helper function cxl_resource_contains_addr() can be used to check if a
resource range contains an input address. Use it to replace all code
that checks whether a resource range contains a DPA/HPA/SPA.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-4-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Per Table 8-143. "Get Partition Info Output Payload" in CXL r3.2 section
8.2.10.9.2.1 "Get Partition Info(Opcode 4100h)", DPA 0 is a valid
address of a CXL device. However, cxl_do_ppr() considers it as an
invalid address, so that user will get an -EINVAL when user calls the
sysfs interface of the edac driver to trigger a Post Package Repair(PPR)
operation for DPA 0 on a CXL device. The correct implementation should
be checking if the input DPA is in the DPA range of the CXL device.
Fixes: be9b359e05 ("cxl/edac: Add CXL memory device soft PPR control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-3-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In CXL subsystem, many functions need to check an address availability
by checking if the resource range contains the address. Providing a new
helper function cxl_resource_contains_addr() to check if the resource
range contains the input address.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250711032357.127355-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Currently, the ACK RSSI value is not shown in station dump. Enable WMI
resource flag for ACK RSSI in WMI INIT command to add ACK RSSI value in
management TX completion event from WMI. Update ACK RSSI value obtained
in management and data frame completion path to ieee80211_tx_info. Also
advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag during hardware
register to mac80211 layer so that ACK RSSI is added to station dump
message.
Example output :
Station aa:bb:cc:dd:ee:ff (on wlp88s0)
inactive time: 46584 ms
rx bytes: 955
rx packets: 10
tx bytes: 769
tx packets: 6
tx retries: 81
tx failed: 0
rx drop misc: 0
signal: -39 dBm
signal avg: -40 dBm
tx bitrate: 6.0 MBit/s
tx duration: 1185 us
rx bitrate: 309.7 MBit/s 40MHz HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0
rx duration: 0 us
last ack signal:-41 dBm
avg ack signal: -40 dBm
authorized: yes
authenticated: yes
.......
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sivashankari Madhavan <quic_sivamadh@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250709133554.622463-1-quic_ssreeela@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix a coding mistake in a previous fix related to system suspend
and hibernation merged recently.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhw2k4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1RMYH/2qgZ/ocUAh8SL1y4rhj19O5J5ihZtZr
Joh3zzUirX6bhxlmP9NHtLNBFNSma72rI2WUDPz9tA6RxfY/lV9CssXCIYN/w8YU
xsso4X0cOulxTvR0hiS6DcXXtFg1X/OgV6w+Pv5t1pLvnsIcCRJtGFfGU909kSKV
yap6DMbSiV3WC8B03Az3B6OUFBTaCuvt1ghs2I9F8O4b6/WuUrriYIAb3/MgWqQl
YA/STieJWUo/hgpIvC09x/Raf8cztIqEi98DCADzhU43wZNR/t8ahlOnlIPK/ujh
TnJHZdpVJUDS62reqaZHnQPxGnfltOPAqlWoM1azo8SCeouhEb1fOXM=
=TocQ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in a previous fix related to system suspend and
hibernation merged recently"
* tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
Add support to Alienware Area-51m and Alienware m15 R5.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250710-m15_r5-v1-1-2c6ad44e5987@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Print the status of enabled attack vectors and SMT mitigation status in the
boot log for easier reporting and debugging. This information will also be
available through sysfs.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-21-david.kaplan@amd.com
Use attack vector controls to determine which TSA mitigation to use.
[ bp: Simplify the condition in the select function for better
readability. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250709155844.3279471-1-david.kaplan@amd.com
Use attack vector controls to determine if L1TF mitigation is required.
Disable SMT if cross-thread protection is desired.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-17-david.kaplan@amd.com
Use attack vector controls to determine if retbleed mitigation is
required.
Disable SMT if cross-thread protection is desired and STIBP is not
available.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-13-david.kaplan@amd.com
Use attack vector controls to determine if MDS mitigation is required.
The global mitigations=off command now simply disables all attack vectors
so explicit checking of mitigations=off is no longer needed.
If cross-thread attack mitigations are required, disable SMT.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-6-david.kaplan@amd.com
Add a function which defines which vulnerabilities should be mitigated
based on the selected attack vector controls. The selections here are
based on the individual characteristics of each vulnerability.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-5-david.kaplan@amd.com
ARCH_HAS_CPU_ATTACK_VECTORS should be set for architectures which implement
the new attack-vector based controls for CPU mitigations. If an arch does
not support attack-vector based controls then an attempt to use them
results in a warning.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-4-david.kaplan@amd.com
Define 4 new attack vectors that are used for controlling CPU speculation
mitigations. These may be individually disabled as part of the
mitigations= command line. Attack vector controls are combined with global
options like 'auto' or 'auto,nosmt' like 'mitigations=auto,no_user_kernel'.
The global options come first in the mitigations= string.
Cross-thread mitigations can either remain enabled fully, including
potentially disabling SMT ('auto,nosmt'), remain enabled except for
disabling SMT ('auto'), or entirely disabled through the new
'no_cross_thread' attack vector option.
The default settings for these attack vectors are consistent with existing
kernel defaults, other than the automatic disabling of VM-based attack
vectors if KVM support is not present.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-3-david.kaplan@amd.com
The think-lmi driver uses the firwmare_attributes_class. But this class
is registered after think-lmi, causing the "think-lmi" directory in
"/sys/class/firmware-attributes" to be missing when the driver is
compiled as builtin.
Fixes: 5592240380 ("platform/x86: think-lmi: Directly use firmware_attributes_class")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
