1. Prefer using the BIT macro
2. Macro argument 'n' as '(n)' to avoid precedence issues
3. Add a blank line after enum declarations
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250512124615.2848731-3-andyshrk@163.com
Since this register definition is only use in one single c
file, there is no need to put it in a separate header.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250512124615.2848731-2-andyshrk@163.com
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250515203554564-j1jBXUXR6bdiN6zARicC@zte.com.cn
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Considering that some code depend on the connector, the following
changes have been made:
- Only process edid in &drm_bridge_funcs.edid_read(), so no need to
store additional edid info.
- Now cdn_dp_get_sink_capability() only focused on reading DPCD_REV.
- Update bpc info in cdn_dp_bridge_atomic_enable() instead of
cdn_dp_encoder_mode_set(). Actually, the bpc data will be used in
cdn_dp_bridge_atomic_enable().
- Switch to use DRM_BRIDGE_OP_DP_AUDIO helpers.
This patch also convert to use devm_drm_bridge_alloc() API.
Tested with RK3399 EVB IND board.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250529071334.441-1-kernel@airkyi.com
Each window of a vop2 is usable by a specific set of video ports, so while
binding the vop2, we look through the list of available windows trying to
find one designated as primary-plane and usable by that specific port.
The code later wants to use drm_crtc_init_with_planes with that found
primary plane, but nothing has checked so far if a primary plane was
actually found.
For whatever reason, the rk3576 vp2 does not have a usable primary window
(if vp0 is also in use) which brought the issue to light and ended in a
null-pointer dereference further down.
As we expect a primary-plane to exist for a video-port, add a check at
the end of the window-iteration and fail probing if none was found.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250610212748.1062375-1-heiko@sntech.de
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
[on a not-upstream px30 board with lvds display]
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250526015834.102-1-kernel@airkyi.com
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference.
Fixes: b0d3969d2b ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly added of_reserved_mem_region_to_resource{_byname}()
functions to handle "memory-region" properties.
The error handling is a bit different for mtk_wed_mcu_load_firmware().
A failed match of the "memory-region-names" would skip the entry, but
then other errors in the lookup and retrieval of the address would not
skip the entry. However, that distinction is not really important.
Either the region is available and usable or it is not. So now, errors
from of_reserved_mem_region_to_resource() are ignored so the region is
simply skipped.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250703183459.2074381-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms may be configured to not support notification events from
certain sources. This scenario is already handled gracefully by avoiding
any attempt to send a notification enable request for those sources, as
such requests would inevitably fail.
However, in a more extreme case, a platform might not support even a
single source for a given event type. In this situation, allowing
notifier registration is meaningless. Attempting to register a notifier
would serve no purpose and only result in unnecessary overhead.
To address this, we now detect such conditions during the protocol
initialization. When identified, we flag the unsupported event types and
reject any subsequent notifier registration attempts for them with
-ENOTSUPP. This early rejection avoids redundant processing and
simplifies runtime logic.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250707144220.485365-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While BRBE can record branches within guests, the host recording
branches in guests is not supported by perf (though events are).
Support for BRBE in guests will supported by providing direct access
to BRBE within the guests. That is how x86 LBR works for guests.
Therefore, BRBE needs to be disabled on guest entry and restored on
exit.
For nVHE, this requires explicit handling for guests. Before
entering a guest, save the BRBE state and disable the it. When
returning to the host, restore the state.
For VHE, it is not necessary. We initialize
BRBCR_EL1.{E1BRE,E0BRE}=={0,0} at boot time, and HCR_EL2.TGE==1 while
running in the host. We configure BRBCR_EL2.{E2BRE,E0HBRE} to enable
branch recording in the host. When entering the guest, we set
HCR_EL2.TGE==0 which means BRBCR_EL1 is used instead of BRBCR_EL2.
Consequently for VHE, BRBE recording is disabled at EL1 and EL0 when
running a guest.
Should recording in guests (by the host) ever be desired, the perf ABI
will need to be extended to distinguish guest addresses (struct
perf_branch_entry.priv) for starters. BRBE records would also need to be
invalidated on guest entry/exit as guest/host EL1 and EL0 records can't
be distinguished.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-3-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
To use the Branch Record Buffer Extension (BRBE), some configuration is
necessary at EL3 and EL2. This patch documents the requirements and adds
the initial EL2 setup code, which largely consists of configuring the
fine-grained traps and initializing a couple of BRBE control registers.
Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and
HDFGWTR_EL2 with the same value, relying on the read/write trap controls
for a register occupying the same bit position in either register. The
'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit
59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds.
To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit
layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and
HDFGWTR_EL2 control bits separately. While making this change the
open-coded value (1 << 62) is replaced with
HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK.
The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special
initialisation: even though they are subject to E2H renaming, both have
an effect regardless of HCR_EL2.TGE, even when running at EL2. So we
must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled
in __init_el2_brbe() with a comment to explain the situation.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Mark: rewrite commit message, fix typo in comment]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds definitions related to the Branch Record Buffer Extension
(BRBE) as per ARM DDI 0487K.a. These will be used by KVM and a BRBE driver
in subsequent patches.
Some existing BRBE definitions in asm/sysreg.h are replaced with equivalent
generated definitions.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-1-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703102219.1248399-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chen-Yu Tsai says:
====================
allwinner: a523: Rename emac0 to gmac0
This small series aims to align the name of the first ethernet
controller found on the Allwinner A523 SoC family with the name
found in the datasheets. It renames the compatible string and
any other references from "emac0" to "gmac0".
When support of the hardware was introduced, the name chosen was
"EMAC", which followed previous generations. However the datasheets
use the name "GMAC" instead, likely because there is another "GMAC"
based on a newer DWMAC IP.
====================
Link: https://patch.msgid.link/20250628054438.2864220-1-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47
Reported-by: syzbot+de6565462ab540f50e47@syzkaller.appspotmail.com
Fixes: 270a1c3de4 ("tcp: Support MSG_SPLICE_PAGES")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20250707054112.101081-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Reject SEV{-ES} intra-host migration if one or more vCPUs are actively
being created so as not to create a non-SEV{-ES} vCPU in an SEV{-ES} VM.
- Use a pre-allocated, per-vCPU buffer for handling de-sparsified vCPU masks
when emulating Hyper-V hypercalls to fix a "stack frame too large" issue.
- Allow out-of-range/invalid Xen event channel ports when configuring IRQ
routing to avoid dictating a specific ioctl() ordering to userspace.
- Conditionally reschedule when setting memory attributes to avoid soft
lockups when userspace converts huge swaths of memory to/from private.
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest.
- Add a missing field in struct sev_data_snp_launch_start that resulted in
the guest-visible workarounds field being filled at the wrong offset.
- Skip non-canonical address when processing Hyper-V PV TLB flushes to avoid
VM-Fail on INVVPID.
-----BEGIN PGP SIGNATURE-----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=BSws
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.16-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.16-rcN
- Reject SEV{-ES} intra-host migration if one or more vCPUs are actively
being created so as not to create a non-SEV{-ES} vCPU in an SEV{-ES} VM.
- Use a pre-allocated, per-vCPU buffer for handling de-sparsified vCPU masks
when emulating Hyper-V hypercalls to fix a "stack frame too large" issue.
- Allow out-of-range/invalid Xen event channel ports when configuring IRQ
routing to avoid dictating a specific ioctl() ordering to userspace.
- Conditionally reschedule when setting memory attributes to avoid soft
lockups when userspace converts huge swaths of memory to/from private.
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest.
- Add a missing field in struct sev_data_snp_launch_start that resulted in
the guest-visible workarounds field being filled at the wrong offset.
- Skip non-canonical address when processing Hyper-V PV TLB flushes to avoid
VM-Fail on INVVPID.
- Advertise supported TDX TDVMCALLs to userspace.
- Remove the last leftovers from the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
-----BEGIN PGP SIGNATURE-----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=H+oh
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-5' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #
- Remove the last leftovers from the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
All filesystems will already check the max and min value of their block
size during their initialization. __getblk_slow() is a very low-level
function to have these checks. Remove them and only check for logical
block size alignment.
As this check with logical block size alignment might never trigger, add
WARN_ON_ONCE() to the check. As WARN_ON_ONCE() will already print the
stack, remove the call to dump_stack().
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/20250626113223.181399-1-p.raghav@samsung.com
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa4 ("get rid of NR_OPEN and introduce a sysctl_nr_open")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host on
stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
-----BEGIN PGP SIGNATURE-----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=no8X
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-4' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #4
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host on
stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
The UAPI headers have been split out from the kernel-only headers.
They maintained as part of the bitmap library.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
BITS_PER_LONG does not exist in UAPI headers, so can't be used by the UAPI
__GENMASK(). Instead __BITS_PER_LONG needs to be used.
When __GENMASK() was introduced in commit 3c7a8e190b ("uapi: introduce uapi-friendly macros for GENMASK"),
the code was fine. A broken revert in 1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
introduced the incorrect usage of BITS_PER_LONG.
That was fixed in commit 11fcf36850 ("uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again").
But a broken sync of the kernel headers with the tools/ headers in
commit fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
undid the fix.
Reapply the fix and while at it also fix the tools header.
Fixes: fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Add some comments to dump_enum to help the next person who has to figure
out what it is actually doing.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-8-corbet@lwn.net
We no longer support Python 2 in the docs build chain at all, so we
certainly do not need to admonish folks to keep this file working with it.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-7-corbet@lwn.net
Add a set of comments to process_proto_function and reorganize the logic
slightly; no functional change.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-6-corbet@lwn.net
process_proto_type() is using a complex regex and a "while True" loop to
split a declaration into chunks and, in the end, count brackets. Switch to
using a simpler regex to just do the split directly, and handle each chunk
as it comes. The result is, IMO, easier to understand and reason about.
The old algorithm would occasionally elide the space between function
parameters; see struct rng_alg->generate(), foe example. The only output
difference is to not elide that space, which is more correct.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-5-corbet@lwn.net
Putting the floor under brcount does not change the output in any way, just
remove it.
Change the termination test from ==0 to <=0 to prevent infinite loops in
case somebody does something truly wacko in the code.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-4-corbet@lwn.net
process_proto_type() and process_proto_function() reinventing the strip()
string method with a whole series of separate regexes; take all that out
and just use strip().
The previous implementation also (in process_proto_type()) removed C++
comments *after* the above dance, leaving trailing whitespace in that case;
now we do the stripping afterward. This results in exactly one output
change: the removal of a spurious space in the definition of
BACKLIGHT_POWER_REDUCED - see
https://docs.kernel.org/gpu/backlight.html#c.backlight_properties.
I note that we are putting semicolons after #define lines that really
shouldn't be there - a task for another day.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-2-corbet@lwn.net
pktcdvd got killed in a previous commit, remove the reference to it as
well in the cdrom documentation.
Fixes: 1cea5180f2 ("block: remove pktcdvd driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Panther Lake has proven to be stable through testing and use.
Remove the force_probe requirement and enable the platform by default.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250707201959.319406-1-matthew.s.atwood@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When uloading snd_soc_avs module there is NULL pointer dereference.
It happens, because codec was moved into pdata and
avs_component_hda_unregister_dais() was not updated.
Fixes: 1581d5c682 ("ASoC: Intel: avs: boards: Add Kconfig option for obsolete card names")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20250708105009.1883627-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new netlink parameter 'HANDSHAKE_A_ACCEPT_KEYRING' to provide
the serial number of the keyring to use.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250701144657.104401-1-hare@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
[1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions
Fixes: 757b435aaa ("efi: arm64: Add vmlinux debug link to the Image binary")
Fixes: a050910972 ("efi/libstub: implement generic EFI zboot")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
ADDRLABEL only works when it was set in compilation phase. Replace it with
net_dbg_ratelimited().
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702104417.1526138-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current version of the blk_rq_dma_map support in nvme-pci tries to
reconstruct the DMA mappings from the on the wire descriptors if they
are needed for unmapping. While this is not the case for the direct
mapping fast path and the IOVA path, it is needed for the non-IOVA slow
path, e.g. when using the interconnect is not dma coherent, when using
swiotlb bounce buffering, or a IOMMU mapping that can't coalesce.
While the reconstruction is easy and works fine for the SGL path, where
the on the wire representation maps 1:1 to DMA mappings, the code to
reconstruct the DMA mapping ranges from PRPs can't always work, as a
given PRP layout can come from different DMA mappings, and the current
code doesn't even always get that right.
Give up on this approach and track the actual DMA mapping when actually
needed again.
Fixes: 7ce3c1dd78 ("nvme-pci: convert the data mapping to blk_rq_dma_map")
Reported-by: Ben Copeland <ben.copeland@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250707125223.3022531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from entry handling in arch/arm64/kernel/entry-common.c and
arch/arm64/kernel/entry.S.
This change unconditionally includes the bad stack handling and overflow
detection logic, simplifying the code and reflecting the mandatory use of
VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-8-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all
CONFIG_VMAP_STACK conditionals from SDEI stack allocation and
initialization in arch/arm64/kernel/sdei.c.
This change unconditionally defines the SDEI stack pointers and replaces
runtime checks with BUILD_BUG_ON() assertions, ensuring that the code is
only built when VMAP_STACK is enabled. This simplifies the logic and
reflects the mandatory use of VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-7-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from overflow stack handling in stacktrace code.
This change unconditionally defines the per-CPU overflow_stack and
stackinfo_get_overflow() helper in arch/arm64/include/asm/stacktrace.h,
and always includes the overflow stack in the stack_info array in
arch/arm64/kernel/stacktrace.c. Also, drop redundant CONFIG_VMAP_STACK
checks from SDEI stack declarations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-6-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove the
CONFIG_VMAP_STACK checks from overflow stack definitions and related
code in arch/arm64/kernel/traps.c. The overflow_stack and
panic_bad_stack() logic are now unconditionally included, simplifying
the source and matching the mandatory stack model.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-5-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK always enabled on arm64, drop the CONFIG_VMAP_STACK
checks and legacy irq stack allocation from arch/arm64/kernel/irq.c. The
code now unconditionally uses the VMAP_STACK path for irq stack
initialization, simplifying the logic.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-4-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that VMAP_STACK is always enabled on arm64, remove the
CONFIG_VMAP_STACK conditional logic from the definitions of THREAD_SHIFT
and THREAD_ALIGN in arch/arm64/include/asm/memory.h. This simplifies the
code by unconditionally setting THREAD_ALIGN to (2 * THREAD_SIZE) and
adjusting the THREAD_SHIFT definition to only depend on MIN_THREAD_SHIFT
and PAGE_SHIFT.
This change reflects the updated arm64 stack model, where all kernel
threads use virtually mapped stacks with guard pages, and ensures
alignment and stack sizing are consistently handled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-3-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
