Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions. The latter part has
been done and is present in Rafael's tree at the moment, also see
<URL:https://lore.kernel.org/linux-pm/CAJZ5v0g7-8UWp6ATOy+=oGdxDaCnfKHBG_+kbiTr+
+VeuXZsUFQ@mail.gmail.com/>:
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-runtime-6.17-rc1
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhn7fgACgkQJNaLcl1U
h9ASmAf+J5Wo5QIvuO7FwvNZAId2f21FQSH2PuXC/Pq7RQz2t74u4WdTx19qCU7D
PbduQwzizElKiYHrtvNBGeOHk0LZer1yyI74G5ziRE8gPwQUFK2gKLqGE8dbGhZp
0YjXMK4Yps0br+zJt5UC6zAzPIddYcv43VHb/YJr0dFV3G3vjHQbvyrHHVCgla/u
r1wCdHLqXsHF85OSoc/BIVSwgaDEztAs1bq4jXBw8upVbc0nmi8glJ7gYaRB4Ggv
U5llRHFOgCRWor4yNBXCF8Os9m90khk1/DQqdVBMsXX4R2npbnmPhIu73NarQ49/
F6mTSK4f7jfGBGxpZR16kPHkiwi2fQ==
=ConA
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
Register X0 contains PIE_E1_ASM and should not be written into REG_TCR2_EL1
which could have an adverse impact otherwise. This has remained undetected
till now probably because current value for PIE_E1_ASM (0xcc880e0ac0800000)
clears TCR2_EL1 which again gets set subsequently with 'tcr2' after testing
for FEAT_TCR2.
Drop this unwarranted 'msr' which is a stray change from an earlier commit.
This line got re-introduced when rebasing on top of the commit 926b66e2eb
("arm64: setup: name 'tcr2' register").
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 7052e808c4 ("arm64/sysreg: Get rid of the TCR2_EL1x SysregFields")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250704063812.298914-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We do not currently issue an ISB after updating POR_EL0 when
context-switching it, for instance. The rationale is that if the old
value of POR_EL0 is more restrictive and causes a fault during
uaccess, the access will be retried [1]. In other words, we are
trading an ISB on every context-switching for the (unlikely)
possibility of a spurious fault. We may also miss faults if the new
value of POR_EL0 is more restrictive, but that's considered
acceptable.
However, as things stand, a spurious Overlay fault results in
uaccess failing right away since it causes fault_from_pkey() to
return true. If an Overlay fault is reported, we therefore need to
double check POR_EL0 against vma_pkey(vma) - this is what
arch_vma_access_permitted() already does.
As it turns out, we already perform that explicit check if no
Overlay fault is reported, and we need to keep that check (see
comment added in fault_from_pkey()). Net result: the Overlay ISS2
bit isn't of much help to decide whether a pkey fault occurred.
Remove the check for the Overlay bit from fault_from_pkey() and
add a comment to try and explain the situation. While at it, also
add a comment to permission_overlay_switch() in case anyone gets
surprised by the lack of ISB.
[1] https://lore.kernel.org/linux-arm-kernel/ZtYNGBrcE-j35fpw@arm.com/
Fixes: 160a8e13de ("arm64: context switch POR_EL0 register")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250619160042.2499290-2-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
We have a number of hwcaps for various SME subfeatures enumerated via
ID_AA64SMFR0_EL1. Currently we advertise these without cross checking
against the main SME feature, advertised in ID_AA64PFR1_EL1.SME which
means that if the two are out of sync userspace can see a confusing
situation where SME subfeatures are advertised without the base SME
hwcap. This can be readily triggered by using the arm64.nosme override
which only masks out ID_AA64PFR1_EL1.SME, and there have also been
reports of VMMs which do the same thing.
Fix this as we did previously for SVE in 064737920b ("arm64: Filter
out SVE hwcaps when FEAT_SVE isn't implemented") by filtering out the
SME subfeature hwcaps when FEAT_SME is not present.
Fixes: 5e64b862c4 ("arm64/sme: Basic enumeration support")
Reported-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250620-arm64-sme-filter-hwcaps-v1-1-02b9d3c2d8ef@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For really large values of CONFIG_NR_CPUS, a CPU mask value should
not be put on the stack:
arch/arm64/kernel/smp.c:1188:1: error: the frame size of 8544 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
This could be achieved using alloc_cpumask_var(), which makes it
depend on CONFIG_CPUMASK_OFFSTACK, but as this function is already
serialized and can only run on one CPU, making the variable 'static'
is easier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250620111045.3364827-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250624-fix-kernel-crash-gpu-hard-reset-v1-1-6d24810d72a6@imgtec.com
Cc: stable@vger.kernel.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
For performance reasons (minimizing the number of cache lines accessed
in the hot path), we store the "canceling" state redundantly - there is
one flag in the device, which can be considered the source of truth, and
per-queue copies of that flag. This redundancy can cause confusion, and
opens the door to bugs where the state is set inconsistently. Try to
guard against these bugs by introducing a ublk_set_canceling helper
which is the sole mutator of both the per-device and per-queue canceling
state. This helper always sets the state consistently. Use the helper in
all places where we need to modify the canceling state.
No functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-2-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently, we've observed a few cases where a ublk server is able to
complete restart more quickly than the driver can process the exit of
the previous ublk server. The new ublk server comes up, attempts
recovery of the preexisting ublk devices, and observes them still in
state UBLK_S_DEV_LIVE. While this is possible due to the asynchronous
nature of io_uring cleanup and should therefore be handled properly in
the ublk server, it is still preferable to make ublk server exit
handling faster if possible, as we should strive for it to not be a
limiting factor in how fast a ublk server can restart and provide
service again.
Analysis of the issue showed that the vast majority of the time spent in
handling the ublk server exit was in calls to blk_mq_quiesce_queue,
which is essentially just a (relatively expensive) call to
synchronize_rcu. The ublk server exit path currently issues an
unnecessarily large number of calls to blk_mq_quiesce_queue, for two
reasons:
1. It tries to call blk_mq_quiesce_queue once per ublk_queue. However,
blk_mq_quiesce_queue targets the request_queue of the underlying ublk
device, of which there is only one. So the number of calls is larger
than necessary by a factor of nr_hw_queues.
2. In practice, it calls blk_mq_quiesce_queue _more_ than once per
ublk_queue. This is because of a data race where we read
ubq->canceling without any locking when deciding if we should call
ublk_start_cancel. It is thus possible for two calls to
ublk_uring_cmd_cancel_fn against the same ublk_queue to both call
ublk_start_cancel against the same ublk_queue.
Fix this by making the "canceling" flag a per-device state. This
actually matches the existing code better, as there are several places
where the flag is set or cleared for all queues simultaneously, and
there is the general expectation that cancellation corresponds with ublk
server exit. This per-device canceling flag is then checked under a
(new) lock (addressing the data race (2) above), and the queue is only
quiesced if it is cleared (addressing (1) above). The result is just one
call to blk_mq_quiesce_queue per ublk device.
To minimize the number of cache lines that are accessed in the hot path,
the per-queue canceling flag is kept. The values of the per-device
canceling flag and all per-queue canceling flags should always match.
In our setup, where one ublk server handles I/O for 128 ublk devices,
each having 24 hardware queues of depth 4096, here are the results
before and after this patch, where teardown time is measured from the
first call to io_ring_ctx_wait_and_kill to the return from the last
ublk_ch_release:
before after
number of calls to blk_mq_quiesce_queue: 6469 256
teardown time: 11.14s 2.44s
There are still some potential optimizations here, but this takes care
of a big chunk of the ublk server exit handling delay.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250703-ublk_too_many_quiesce-v2-1-3527b5339eeb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During EL2 setup if GCS is advertised in the ID registers we will reset the
GCS control registers GCSCR_EL1 and GCSCRE0_EL1 to known values in order to
ensure it is disabled. This is done without taking into account overrides
supplied on the command line, meaning that if the user has configured
arm64.nogcs we will still access these GCS specific registers. If this was
done because EL3 does not enable GCS this results in traps to EL3 and a
failed boot which is not what users would expect from having set that
parameter.
Move the writes to these registers to finalise_el2_state where we can pay
attention to the command line overrides. For simplicity we leave the
updates to the traps in HCRX_EL2 and the FGT registers in place since these
should only be relevant for KVM guests and KVM will manage them itself for
guests. This follows the existing practice for other similar traps for
overridable features such as those for TPIDR2_EL0 and SMPRI_EL1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250619-arm64-fix-nogcs-v1-1-febf2973672e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The runtime PM might be left in error state if one of the callbacks
returned an error, e.g. if the (auto)suspend callback failed following
a firmware crash.
When that happens, any further attempt to acquire or release a power
reference will then also fail, making it impossible to do anything else
with the GPU. The driver logic will eventually reach the reset code.
In pvr_power_reset(), replace pvr_power_get() with a new API
pvr_power_get_clear() which also attempts to clear any runtime PM error
state if acquiring a power reference is not possible.
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250624-clear-rpm-errors-gpu-reset-v1-1-b8ff2ae55aac@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC,
with a board design that is very close to the Q20x development boards.
The MMC max-frequency properties are copied from the downstream device
tree.
https://ugoos.com/ugoos-am3-16g
The following functionality has been tested and is known to work:
- debug serial port
- "update" button inside the case
- USB host mode, on all three ports
- HDMI video/audio output
- eMMC, MicroSD, and SDIO WLAN
- S/PDIF audio output
- Ethernet
- Infrared remote control input
The following functionality doesn't seem to work:
- USB role switching and device mode on the "OTG" port
- case LED
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-2-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC.
https://ugoos.com/ugoos-am3-16g
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-1-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
meson-gxm-rbox-pro.dtb: brcmf@1: $nodename:0: 'brcmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250424084721.105113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This contains a few framework core fixes (related to the new dynamic node
id feature), as well as some misc Qualcomm and Samsung driver fixes.
- interconnect: qcom: sc7280: Add missing num_links to xm_pcie3_1 node
- interconnect: exynos: handle node name allocation failure
- interconnect: increase ICC_DYN_ID_START
- interconnect: icc-clk: destroy nodes in case of memory allocation failures
- interconnect: avoid memory allocation when 'icc_bw_lock' is held
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zuLx
-----END PGP SIGNATURE-----
Merge tag 'icc-6.16-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fixes for v6.16-rc
This contains a few framework core fixes (related to the new dynamic node
id feature), as well as some misc Qualcomm and Samsung driver fixes.
- interconnect: qcom: sc7280: Add missing num_links to xm_pcie3_1 node
- interconnect: exynos: handle node name allocation failure
- interconnect: increase ICC_DYN_ID_START
- interconnect: icc-clk: destroy nodes in case of memory allocation failures
- interconnect: avoid memory allocation when 'icc_bw_lock' is held
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.16-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: avoid memory allocation when 'icc_bw_lock' is held
interconnect: icc-clk: destroy nodes in case of memory allocation failures
interconnect: increase ICC_DYN_ID_START
interconnect: exynos: handle node name allocation failure
interconnect: qcom: sc7280: Add missing num_links to xm_pcie3_1 node
The usual mixed back of the recent and ancient issues that have surfaced
so far this cycle.
iio-core
- Fix a possible out of bounds write on writing string terminator.
iio-backend:
- Fix a possible out of bounds write on writing string terminator.
adi,ad3530r
- Fix wrong masking for channels 4-7 in powerdown mode as they are in a
second register and mask assumed all in one larger register.
adi,ad7380
- Fix parsing of adi,gain-milli property by reading it as u16 as specified
in the binding.
adi,ad7606
- Tweak dt-binding to allow both interrupts and backend to be wired up
resolving some dt_schema warnings.
- Mask value before returning it in register read as for parallel busses
both the value and (unwanted) address are read back.
adi,ad7949
- Use spi_is_bpw_supported() to correctly handle bits_per_word_mask == 0
which means default value of 8.
invensense,mpu3050
- Fix wrong number of interrupts in the binding as minItems should have
been maxItems.
maxim,max1363
- Two related fixes for a long running mismatch between array indexes
that now results in warnings after the core gained a sanity check.
Resulted in unnecessary channels being sampled.
nxp,fxls8962
- Fix a use after free in fxls8962af_fifo_flush() if it races with buffer
mode tear down.
st,sensors
- Stop using indio_dev->dev before it was initialized as the parent device
should be used anyway for error messages and similar.
st,stm32-adc
- Fix a race when installing chained IRQ handler.
x-powers,axp20x_adc
- Add missing sentinel in ADC channel map (avoid out of bounds read).
-----BEGIN PGP SIGNATURE-----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=RA9e
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.16a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
iio: 1st set of fixes for the 6.16 cycle
The usual mixed back of the recent and ancient issues that have surfaced
so far this cycle.
iio-core
- Fix a possible out of bounds write on writing string terminator.
iio-backend:
- Fix a possible out of bounds write on writing string terminator.
adi,ad3530r
- Fix wrong masking for channels 4-7 in powerdown mode as they are in a
second register and mask assumed all in one larger register.
adi,ad7380
- Fix parsing of adi,gain-milli property by reading it as u16 as specified
in the binding.
adi,ad7606
- Tweak dt-binding to allow both interrupts and backend to be wired up
resolving some dt_schema warnings.
- Mask value before returning it in register read as for parallel busses
both the value and (unwanted) address are read back.
adi,ad7949
- Use spi_is_bpw_supported() to correctly handle bits_per_word_mask == 0
which means default value of 8.
invensense,mpu3050
- Fix wrong number of interrupts in the binding as minItems should have
been maxItems.
maxim,max1363
- Two related fixes for a long running mismatch between array indexes
that now results in warnings after the core gained a sanity check.
Resulted in unnecessary channels being sampled.
nxp,fxls8962
- Fix a use after free in fxls8962af_fifo_flush() if it races with buffer
mode tear down.
st,sensors
- Stop using indio_dev->dev before it was initialized as the parent device
should be used anyway for error messages and similar.
st,stm32-adc
- Fix a race when installing chained IRQ handler.
x-powers,axp20x_adc
- Add missing sentinel in ADC channel map (avoid out of bounds read).
* tag 'iio-fixes-for-6.16a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3530r: Fix incorrect masking for channels 4-7 in powerdown mode
iio: adc: ad7380: fix adi,gain-milli property parsing
iio: adc: ad7949: use spi_is_bpw_supported()
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel maps
dt-bindings: iio: gyro: invensense,mpu3050: change irq maxItems
iio: common: st_sensors: Fix use of uninitialize device structs
iio: adc: adi-axi-adc: fix ad7606_bus_reg_read()
dt-bindings: iio: adc: adi,ad7606: fix dt_schema validation warning
iio: adc: max1363: Reorder mode_list[] entries
iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]
iio: adc: stm32-adc: Fix race in installing chained IRQ handler
iio: fix potential out-of-bound write
iio: backend: fix out-of-bound write
Now that we expose struct file_attr as our uapi struct rename all the
internal struct to struct file_kattr to clearly communicate that it is a
kernel internal struct. This is similar to struct mount_{k}attr and
others.
Link: https://lore.kernel.org/20250703-restlaufzeit-baurecht-9ed44552b481@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add debugfs support for mqd for each queue of the client.
The address exposed to debugfs could be used to dump
the mqd.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-5-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add a debugfs file under the client directory which shares
the root page table base address of the VM.
This address could be used to dump the pagetable for debug
memory issues.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-4-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
add support to add a directory for each client-id
with root at the dri level. Since the clients are
unique and not just related to one single drm device,
so it makes more sense to add all the client based
nodes with root as dri.
Also create a debugfs file which show the process
information for the client and create a symlink back
to the parent drm device from each client.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-3-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Requirement is to create per client-id based directories to
hold key debugging information and for that access to
root debugfs dentry is need which is not in one place
and that information cannot be stored in drm_device.
Move the debugfs functionality from drm_drv.c and drm_accel.c
to drm_debugfs.c This enables debugfs root node reference
directly drm_debugfs.c and hence enable to create per client-id
directory.
v8: Create drm_accel dentry only if it's config is enabled (Jeff, Hugo)
v8: Merge drm_drv and drm_accel debugfs patches (Koenig, Christian)
v10: Since we moved drm_debugfs_root, hence to handle drm bridge
debugfs add a new function which call drm_bridge_debugfs_params where
drm_debugfs_root is accessible.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-2-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
One additional PCI ID is added in Bspec for BMG, Add it so that
driver recognizes this device with this new ID.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Vodapalli, Ravi Kumar <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250704103527.100178-1-ravi.kumar.vodapalli@intel.com
Aneesh reports that his kernel fails to boot in nVHE mode with
KVM's protected mode enabled. Further investigation by Mostafa
reveals that this fails because CONFIG_JUMP_LABEL=n and that
we have static keys shared between EL1 and EL2.
While this can be worked around, it is obvious that we have long
relied on having CONFIG_JUMP_LABEL enabled at all times, as all
supported compilers now have 'asm goto' (which is the basic block
for jump labels).
Let's simplify our lives once and for all by mandating jump labels.
It's not like anyone else is testing anything without them, and
we already rely on them for other things (kfence, xfs, preempt).
Link: https://lore.kernel.org/r/yq5ah60pkq03.fsf@kernel.org
Reported-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250613141936.2219895-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
KASAN reports invalid accesses during arch_stack_walk() for EFI runtime
services due to vmalloc tagging[1]. The EFI runtime stack must be allocated
with KASAN tags reset to avoid false positives.
This patch uses arch_alloc_vmap_stack() instead of __vmalloc_node() for
EFI stack allocation, which internally calls kasan_reset_tag()
The changes ensure EFI runtime stacks are properly sanitized for KASAN
while maintaining functional consistency.
Link: https://lore.kernel.org/all/aFVVEgD0236LdrL6@gmail.com/ [1]
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250704-arm_kasan-v2-1-32ebb4fd7607@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Add <linux/io.h> header to pull in readl/writel and friends.
This eliminates the following build errors:
drivers/gpu/drm/msm/dp/dp_panel.c: In function 'msm_dp_read_link':
drivers/gpu/drm/msm/dp/dp_panel.c:33:16: error: implicit declaration of function 'readl_relaxed' [-Wimplicit-function-declaration]
33 | return readl_relaxed(panel->link_base + offset);
drivers/gpu/drm/msm/dp/dp_panel.c: In function 'msm_dp_write_link':
drivers/gpu/drm/msm/dp/dp_panel.c:43:9: error: implicit declaration of function 'writel' [-Wimplicit-function-declaration]
43 | writel(data, panel->link_base + offset);
Fixes: 603fc0fc30 ("drm/msm/dp: drop the msm_dp_catalog module")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/659442/
Link: https://lore.kernel.org/r/20250617185611.2965223-1-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
v12.0 DPU on SM8750 comes with new LM crossbar that requires each pipe
rectangle to be programmed separately in blend stage. Implement support
for this along with a new CTL_LAYER_ACTIVE register and setting the
blend stage in layer mixer code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659632/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-12-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
v12.0 DPU on SM8750 comes with new CTL_PIPE_ACTIVE register for
selective activation of pipes, which replaces earlier
dpu_hw_ctl_setup_blendstage() code path for newer devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659630/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-11-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
v12.0 DPU on SM8750 comes with 10-bit color alpha. Add register
differences and new implementations of setup_alpha_out(),
setup_border_color() and setup_blend_config().
Notable changes in v6:
Correct fg_alpha shift on new DPU, pointed out by Abel Vesas.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659629/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-10-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Linux coding style asks to use kernel types like u32 instead of uint32_t
and code already has it in other places, so unify the remaining pieces.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659623/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-9-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support for DSI on Qualcomm SM8750 SoC with notable difference:
DSI PHY PLLs, the parents of pixel and byte clocks, cannot be used as
parents before DSI PHY is configured, the PLLs are prepared and their
initial rate is set. Therefore assigned-clock-parents are not working
here and driver is responsible for reparenting clocks with proper
procedure: see dsi_clk_init_6g_v2_9().
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659619/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-7-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support for DSI PHY v7.0 on Qualcomm SM8750 SoC which comes with an
incompatible hardware interface change:
ICODE_ACCUM_STATUS_LOW and ALOG_OBSV_BUS_STATUS_1 registers - their
offsets were just switched. Currently these registers are not used in
the driver, so the easiest is to document both but keep them commented
out to avoid conflict.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659616/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-6-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add DisplayPort controller for Qualcomm SM8750 SoC which so far looks
fully compatible with earlier SM8650 variant - both are of version
v1.5.1 of the IP block. Datasheet also mentions that both support 4x
MST for DPTX0 and 2x MST for DPTX1.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659611/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-3-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add DSI controller for Qualcomm SM8750 SoC which is quite different from
previous (SM8650) generation.
It does not allow the display clock controller clocks like "byte" and
"pixel" to be reparented to DSI PHY PLLs while the DSI PHY PLL is not
configured (not prepared, rate not set). Therefore
assigned-clock-parents are not working here and driver is responsible
for reparenting clocks with proper procedure. These clocks are now
inputs to the DSI controller device.
Except that SM8750 DSI comes with several differences, new blocks and
changes in registers, making it incompatible with SM8650.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659609/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-2-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Move CTRL-related functions to dp_ctrl.c, inlining one line wrappers
during this process. The enable/disable functions have been split to the
enable/disable or enter/exit pairs. The IRQ and HPD related functions
are left in dp_catalog.c, pending later cleanup.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/654328/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-8-2f0ec3ec000d@oss.qualcomm.com
