The call chain in the prep_rq and completion paths passes around a lot
of nvme_dev, nvme_queue and nvme_command arguments that can be trivially
derived from the passed in struct request. Remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_setup_prp_simple and nvme_setup_sgl_simple share a lot of logic.
Merge them into a single helper that makes use of the previously added
use_sgl tristate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250625113531.522027-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the average segment size into a separate helper, and return a
tristate to distinguish the case where can use SGL vs where we have to
use SGLs. This will allow the simplify the code and make more efficient
decisions in follow on changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250625113531.522027-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_rq_dma_map / blk_rq_dma_unmap pair that does away with
the wasteful scatterlist structure. Instead it uses the mapping iterator
to either add segments to the IOVA for IOMMU operations, or just maps
them one by one for the direct mapping. For the IOMMU case instead of
a scatterlist with an entry for each segment, only a single [dma_addr,len]
pair needs to be stored for processing a request, and for the direct
mapping the per-segment allocation shrinks from
[page,offset,len,dma_addr,dma_len] to just [dma_addr,len].
One big difference to the scatterlist API, which could be considered
downside, is that the IOVA collapsing only works when the driver sets
a virt_boundary that matches the IOMMU granule. For NVMe this is done
already so it works perfectly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To get out of the DMA mapping helpers having to check every segment for
it's P2P status, ensure that bios either contain P2P transfers or non-P2P
transfers, and that a P2P bio only contains ranges from a single device.
This means we do the page zone access in the bio add path where it should
be still page hot, and will only have do the fairly expensive P2P topology
lookup once per bio down in the DMA mapping path, and only for already
marked bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20250625113531.522027-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DM targets must not split zone append and write operations using
dm_accept_partial_bio() as doing so is forbidden for zone append BIOs,
breaks zone append emulation using regular write BIOs and potentially
creates deadlock situations with queue freeze operations.
Modify dm_accept_partial_bio() to add missing BUG_ON() checks for all
these cases, that is, check that the BIO is a write or write zeroes
operation. This change packs all the zone related checks together under
a static_branch_unlikely(&zoned_enabled) and done only if the target is
a zoned device.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read and write operations issued to a dm-crypt target may be split
according to the dm-crypt internal limits defined by the max_read_size
and max_write_size module parameters (default is 128 KB). The intent is
to improve processing time of large BIOs by splitting them into smaller
operations that can be parallelized on different CPUs.
For zoned dm-crypt targets, this BIO splitting is still done but without
the parallel execution to ensure that the issuing order of write
operations to the underlying devices remains sequential. However, the
splitting itself causes other problems:
1) Since dm-crypt relies on the block layer zone write plugging to
handle zone append emulation using regular write operations, the
reminder of a split write BIO will always be plugged into the target
zone write plugged. Once the on-going write BIO finishes, this
reminder BIO is unplugged and issued from the zone write plug work.
If this reminder BIO itself needs to be split, the reminder will be
re-issued and plugged again, but that causes a call to a
blk_queue_enter(), which may block if a queue freeze operation was
initiated. This results in a deadlock as DM submission still holds
BIOs that the queue freeze side is waiting for.
2) dm-crypt relies on the emulation done by the block layer using
regular write operations for processing zone append operations. This
still requires to properly return the written sector as the BIO
sector of the original BIO. However, this can be done correctly only
and only if there is a single clone BIO used for processing the
original zone append operation issued by the user. If the size of a
zone append operation is larger than dm-crypt max_write_size, then
the orginal BIO will be split and processed as a chain of regular
write operations. Such chaining result in an incorrect written sector
being returned to the zone append issuer using the original BIO
sector. This in turn results in file system data corruptions using
xfs or btrfs.
Fix this by modifying get_max_request_size() to always return the size
of the BIO to avoid it being split with dm_accpet_partial_bio() in
crypt_map(). get_max_request_size() is renamed to
get_max_request_sectors() to clarify the unit of the value returned
and its interface is changed to take a struct dm_target pointer and a
pointer to the struct bio being processed. In addition to this change,
to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt
device max_hw_sectors limit to be at most
BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture).
This forces DM core to split write BIOs before passing them to
crypt_map(), and thus guaranteeing that dm-crypt can always accept an
entire write BIO without needing to split it.
This change does not have any effect on the read path of dm-crypt. Read
operations can still be split and the BIO fragments processed in
parallel. There is also no impact on the performance of the write path
given that all zone write BIOs were already processed inline instead of
in parallel.
This change also does not affect in any way regular dm-crypt block
devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250625093327.548866-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250625093327.548866-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Back in 2015, commit d2be537c3b ("block: bump BLK_DEF_MAX_SECTORS to
2560") increased the default maximum size of a block device I/O to 2560
sectors (1280 KiB) to "accommodate a 10-data-disk stripe write with
chunk size 128k". This choice is rather arbitrary and since then,
improvements to the block layer have software RAID drivers correctly
advertize their stripe width through chunk_sectors and abuses of
BLK_DEF_MAX_SECTORS_CAP by drivers (to set the HW limit rather than the
default user controlled maximum I/O size) have been fixed.
Since many block devices can benefit from a larger value of
BLK_DEF_MAX_SECTORS_CAP, and in particular HDDs, increase this value to
be 4MiB, or 8192 sectors.
And given that BLK_DEF_MAX_SECTORS_CAP is only used in the block layer
and should not be used by drivers directly, move this macro definition
to the block layer internal header file block/blk.h.
Suggested-by: Martin K . Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250618060045.37593-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As part of a larger effort to bring various PowerPC-related bindings
into the YAML world, this patch converts msi-pic.txt to YAML and moves
it into the bindings/interrupt-controller/ directory. The conversion may
necessarily be a bit hard to read because the binding is quite verbose.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250611-msipic-yaml-v2-1-f2e174c48802@posteo.net
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add the "gpu-clkgen" reset property to the AON device tree node. This
allows the AON power domain driver to detect the capability to power
sequence the GPU and spawn the necessary pwrseq-thead-gpu auxiliary
driver for managing the GPU's complex power sequence.
This commit also adds the prerequisite
dt-bindings/reset/thead,th1520-reset.h include to make the
TH1520_RESET_ID_GPU_CLKGEN available. This include was previously
dropped during a conflict resolution [1].
Link: https://lore.kernel.org/all/aAvfn2mq0Ksi8DF2@x1/ [1]
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Probing peripherals in the AON and PERI domains, such as the PVT thermal
sensor and the PWM controller, can lead to boot hangs or unresponsive
devices on the LPi4A board. The root cause is that their parent bus
clocks ('CLK_CPU2AON_X2H' and the 'CLK_PERISYS_APB' clocks) are
automatically gated by the kernel's power-saving mechanisms when the bus
is perceived as idle.
Alternative solutions were investigated, including modeling the parent
bus in the Device Tree with 'simple-pm-bus' or refactoring the clock
driver's parentage. The 'simple-pm-bus' approach is not viable due to
the lack of defined bus address ranges in the hardware manual and its
creation of improper dependencies on the 'pm_runtime' API for consumer
drivers.
Therefore, applying the'`CLK_IGNORE_UNUSED' flag directly to the
essential bus clocks is the most direct and targeted fix. This prevents
the kernel from auto-gating these buses and ensures peripherals remain
accessible.
This change fixes the boot hang associated with the PVT sensor and
resolves the functional issues with the PWM controller.
Link: https://lore.kernel.org/all/9e8a12db-236d-474c-b110-b3be96edf057@samsung.com/ [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Users reported insufficient error information for debugging during
firmware update failures on certain platforms. Add verbose error logs
in the error code path to enhance debuggability.
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250604022956.3723438-1-yu.c.chen@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Today, a few work structs inside tcon are initialized inside
cifs_get_tcon and not in tcon_info_alloc. As a result, if a tcon
is obtained from tcon_info_alloc, but not called as a part of
cifs_get_tcon, we may trip over.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Both pwm_config() and pwm_enable() are wrappers around
pwm_apply_might_sleep(). Instead of calling this function twice only
call it once without an intermediate step.
Setup the PWM in max8997_haptic_enable() only where it was enabled
historically. max8997_haptic_set_duty_cycle() is renamed accordingly to
make it clear this function is only about the internal setup now.
pwm_config() was called earlier back then, but that call has no effect
on the hardware when the PWM is disabled, so delaying this configuration
doesn't make a difference.
As pwm_apply_might_sleep() is used now defining the whole state of the
PWM, the call to pwm_apply_args() in .probe() can be dropped now, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630093718.2062359-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Motorola uses its pointer tables for page tables, so its macros should be
using struct ptdesc, not struct page. This removes a user of page->lru.
Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611001255.527952-5-vishal.moola@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Motorola uses init_pointer_table() for page tables, so it should be using
struct ptdesc, not struct page.
This helps us prepare to allocate ptdescs as their own memory
descriptor, and prepares to remove a user of page->lru.
Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611001255.527952-4-vishal.moola@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Motorola uses free_pointer_table() for page tables, so it should be using
struct ptdesc, not struct page.
This helps us prepare to allocate ptdescs as their own memory
descriptor, and prepares to remove a user of page->lru.
Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611001255.527952-3-vishal.moola@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Motorola uses get_pointer_table() for page tables, so it should be using
struct ptdesc, not struct page.
This helps us prepare to allocate ptdescs as their own memory
descriptor, and prepares to remove a user of page->lru.
Signed-off-by: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250611001255.527952-2-vishal.moola@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add Bartlett Lake to the list of supported processors in the RAPL
common driver.
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Qiao Wei <wei.qiao@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PL1 cannot be disabled on some platforms. The ENABLE bit is still set
after software clears it. This behavior leads to a scenario where, upon
user request to disable the Power Limit through the powercap sysfs, the
ENABLE bit remains set while the CLAMPING bit is inadvertently cleared.
According to the Intel Software Developer's Manual, the CLAMPING bit,
"When set, allows the processor to go below the OS requested P states in
order to maintain the power below specified Platform Power Limit value."
Thus this means the system may operate at higher power levels than
intended on such platforms.
Enhance the code to check ENABLE bit after writing to it, and stop
further processing if ENABLE bit cannot be changed.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2d281d8196 ("PowerCap: Introduce Intel RAPL power capping driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250619071340.384782-1-rui.zhang@intel.com
[ rjw: Use str_enabled_disabled() instead of open-coded equivalent ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d862 ("drm/i915/gsc: add gsc as a mei auxiliary device")
Tested-by: Furong Zhou <furong.zhou@intel.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Why]
OLED panels can be fully off, but this behavior is unexpected.
[How]
Ensure that minimum luminance is at least 1.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51496c7737)
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe7645d22b)
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e9d17a5dc)
Cc: stable@vger.kernel.org
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cf66089e2)
Cc: stable@vger.kernel.org
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
The backtrace of hung task:
INFO: task python:348105 blocked for more than 64512 seconds.
Call Trace:
__schedule+0x1c3/0x550
schedule+0x46/0xb0
rwsem_down_write_slowpath+0x24b/0x4c0
unlink_anon_vmas+0xb1/0x1c0
free_pgtables+0xa9/0x130
exit_mmap+0xbc/0x1a0
mmput+0x5a/0x140
svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu]
mn_itree_invalidate+0x72/0xc0
__mmu_notifier_invalidate_range_start+0x48/0x60
try_to_unmap_one+0x10fa/0x1400
rmap_walk_anon+0x196/0x460
try_to_unmap+0xbb/0x210
migrate_page_unmap+0x54d/0x7e0
migrate_pages_batch+0x1c3/0xae0
migrate_pages_sync+0x98/0x240
migrate_pages+0x25c/0x520
compact_zone+0x29d/0x590
compact_zone_order+0xb6/0xf0
try_to_compact_pages+0xbe/0x220
__alloc_pages_direct_compact+0x96/0x1a0
__alloc_pages_slowpath+0x410/0x930
__alloc_pages_nodemask+0x3a9/0x3e0
do_huge_pmd_anonymous_page+0xd7/0x3e0
__handle_mm_fault+0x5e3/0x5f0
handle_mm_fault+0xf7/0x2e0
hmm_vma_fault.isra.0+0x4d/0xa0
walk_pmd_range.isra.0+0xa8/0x310
walk_pud_range+0x167/0x240
walk_pgd_range+0x55/0x100
__walk_page_range+0x87/0x90
walk_page_range+0xf6/0x160
hmm_range_fault+0x4f/0x90
amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu]
amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu]
init_user_pages+0xb1/0x2a0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu]
kfd_ioctl+0x29d/0x500 [amdgpu]
Fixes: fa582c6f36 ("drm/amdkfd: Use mmget_not_zero in MMU notifier")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a29e067bd3)
Cc: stable@vger.kernel.org
The i2c_dw_xfer_init() function requires msgs and msg_write_idx from the
dev context to be initialized.
amd_i2c_dw_xfer_quirk() inits msgs and msgs_num, but not msg_write_idx.
This could allow an out of bounds access (of msgs).
Initialize msg_write_idx before calling i2c_dw_xfer_init().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 17631e8ca2 ("i2c: designware: Add driver support for AMD NAVI GPU")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250627143511.489570-1-michael.j.ruhl@intel.com
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250620-bbg-v5-3-84f9b9a2e3a8@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Document the seeed,am335x-bone-green-eco compatible string in the
appropriate place within the omap family binding file.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250620-bbg-v5-2-84f9b9a2e3a8@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-----BEGIN PGP SIGNATURE-----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=IUBY
-----END PGP SIGNATURE-----
Merge tag 'entry-split-for-arm' into core/entry
Prerequisite for ARM[64] generic entry conversion
Merge it into the entry branch so further changes can be based on it.
Currently CONFIG_GENERIC_ENTRY enables both the generic exception
entry logic and the generic syscall entry logic, which are otherwise
loosely coupled.
Introduce separate config options for these so that architectures can
select the two independently. This will make it easier for
architectures to migrate to generic entry code.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250213130007.1418890-2-ruanjinjie@huawei.com
Link: https://lore.kernel.org/all/20250624-generic-entry-split-v1-1-53d5ef4f94df@linaro.org
[Linus Walleij: rebase onto v6.16-rc1]
This got missed during SDMA 4.4.4 support.
Fixes: 968e3811c3 ("drm/amdgpu: add initial support for sdma444")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51526efe02)
Cc: stable@vger.kernel.org
Set memory mtype to UC host memory when ext-coherent
flag is set and memory is registered as a SVM allocation.
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d14fdab47)
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 61feed0baa)
An errant ';' slipped into that definition, which will cause some
compilers to complain when it's used in an application:
timestamp.c:257:45: error: empty expression statement has no effect; remove unnecessary ';' to silence this warning [-Werror,-Wextra-semi-stmt]
257 | hwts = cqe->flags & IORING_CQE_F_TSTAMP_HW;
| ^
Fixes: 9e4ed359b8 ("io_uring/netcmd: add tx timestamping cmd support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 4900454b4f.
Now that nobody relies of cfg->priv containing anything useful before the
.init() callback is used, restore the previous behaviour.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-4-maz@kernel.org
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
After commit 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref
struct"), fb_deferred_io_init() allocates memory for info->pagerefs as
well as return an error code on failure. However the error code is
ignored here and the memory allocated could leak because of not calling
fb_deferred_io_cleanup() on the error path.
Fix them by adding the cleanup function on the error path, and handling
the error code returned by fb_deferred_io_init().
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/fd2be49cfef72799f17a96d01a4c6b92770cda7d.1751207100.git.abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both wifi_regd.c and ioctl_cfg80211.c define a static function
rtw_ieee80211_channel_to_frequency() with identical functionality.
Remove the function from wifi_regd.c and make it non-static in
ioctl_cfg80211.c to avoid code duplication.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_ieee80211_channel_to_frequency() in ioctl_cfg80211.c
is always called with band = NL80211_BAND_2GHZ. Remove the unnecessary
band parameter from the function and adjust its code and calls.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter 'band' of rtw_ieee80211_channel_to_frequency() in
wifi_regd.c is unused, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
