This patch fixes an issue seen in a large-scale deployment under heavy
incoming pkts where the aRFS flow wrongly matches a flow and reprograms the
NIC with wrong settings. That mis-steering causes RX-path latency spikes
and noisy neighbor effects when many connections collide on the same
hash (some of our production servers have 20-30K connections).
set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by
hashing the skb sized by the per rx-queue table size. This results in
multiple connections (even across different rx-queues) getting the same
hash value. The driver steer function modifies the wrong flow to use this
rx-queue, e.g.: Flow#1 is first added:
Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10
Later when a new flow needs to be added:
Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20
The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This
results in both flows getting un-optimized - packets for Flow#1 goes to
q#20, and then reprogrammed back to q#10 later and so on; and Flow #2
programming is never done as Flow#1 is matched first for all misses. Many
flows may wrongly share the same hash and reprogram rules of the original
flow each with their own q#.
Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf
clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s
72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS,
enable aRFS (global value is 144 * rps_flow_cnt).
Test notes about results from ice_rx_flow_steer():
---------------------------------------------------
1. "Skip:" counter increments here:
if (fltr_info->q_index == rxq_idx ||
arfs_entry->fltr_state != ICE_ARFS_ACTIVE)
goto out;
2. "Add:" counter increments here:
ret = arfs_entry->fltr_info.fltr_id;
INIT_HLIST_NODE(&arfs_entry->list_entry);
3. "Update:" counter increments here:
/* update the queue to forward to on an already existing flow */
Runtime comparison: original code vs with the patch for different
rps_flow_cnt values.
+-------------------------------+--------------+--------------+
| rps_flow_cnt | 512 | 2048 |
+-------------------------------+--------------+--------------+
| Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K |
| Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K |
| CPU User | 216 vs 183 | 216 vs 206 |
| CPU System | 1441 vs 1171 | 1447 vs 1320 |
| CPU Softirq | 1245 vs 920 | 1238 vs 961 |
| CPU Total | 29 vs 22.7 | 29 vs 24.9 |
| aRFS Update | 533K vs 59 | 521K vs 32 |
| aRFS Skip | 82M vs 77M | 7.2M vs 4.5M |
+-------------------------------+--------------+--------------+
A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections
showed no performance degradation.
Some points on the patch/aRFS behavior:
1. Enabling full tuple matching ensures flows are always correctly matched,
even with smaller hash sizes.
2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs
and fewer calls to driver for programming on misses.
3. Larger hash tables reduces mis-steering due to more unique flow hashes,
but still has clashes. However, with larger per-device rps_flow_cnt, old
flows take more time to expire and new aRFS flows cannot be added if h/w
limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt
pkts have been processed by this cpu that are not part of the flow).
Fixes: 28bf26724f ("ice: Implement aRFS")
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The qib Infiniband device has long been decommissioned from distros and
unsupported by the company. We have kept it going in a compile only mode
for a while now and it's time to remove the driver. It has a number of
issues that are never going to be addressed and is a hindrance to
improving hfi1 and rdmavt.
Link: https://patch.msgid.link/r/174836076755.2436819.5981097575800950899.stgit@awdrv-04.cornelisnetworks.com
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the PCI Endpoint (EP) device tree binding documentation to
include PCIe Gen5 and Gen6 support for the `max-link-speed` property.
Similar to the Host Controller binding, the original EP binding
limited this value to 1~4 (Gen1~Gen4). With current SoCs requiring
Gen5/Gen6 support (e.g., Synopsys/Cadence IP), this change aligns
the EP binding with the kernel's PCIe 6.0 capabilities.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250529021026.475861-3-18255117159@163.com
QCS8300 is derived from SA8775p. Hence, add the callback with SA8775p as
the fallback.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250529035635.4162149-3-quic_ziyuzhan@quicinc.com
QCS615 is derived from SM8150. Hence, add the callback with SM8150 as the
fallback.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250527072036.3599076-3-quic_ziyuzhan@quicinc.com
Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().
See commit 7d95680d64 ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().
See commit 7d95680d64 ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The recent change which added READ_ONCE_NOCHECK() to read the nth entry
from the kernel stack incorrectly dropped dereferencing of the stack
pointer in order to read the requested entry.
In result the address of the entry is returned instead of its content.
Dereference the pointer again to fix this.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/r/20250612163331.GA13384@willie-the-truck
Fixes: d93a855c31 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-7-ville.syrjala@linux.intel.com
When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-6-ville.syrjala@linux.intel.com
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-5-ville.syrjala@linux.intel.com
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-4-ville.syrjala@linux.intel.com
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-2-ville.syrjala@linux.intel.com
Fixes the power regulator retrieval in tcan4x5x_can_probe() by ensuring
the regulator pointer is not set to NULL in the successful return from
devm_regulator_get_optional().
Fixes: 3814ca3a10 ("can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config")
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250612191825.3646364-1-brett.werling@garmin.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
btree node scrub was sometimes failing to rewrite nodes with errors;
bch2_btree_node_rewrite() can return a transaction restart and we
weren't checking - the lockrestart_do() needs to wrap the entire
operation.
And there's a better helper it should've been using,
bch2_btree_node_rewrite_key(), which makes all this more convenient.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
LSM hooks such as security_path_mknod() and security_inode_rename() have
access to newly allocated negative dentry, which has NULL d_inode.
Therefore, it is necessary to do the NULL pointer check for d_inode.
Also add selftests that checks the verifier enforces the NULL pointer
check.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20250613052857.1992233-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The parallel scratch layout spans 2k and LRC_ENGINE_ID_PPHWSP_OFFSET
lands within than space. This happens to be ok as the offset lands in
reserved part of guc_sched_wq_desc, but for future safety move
LRC_ENGINE_ID_PPHWSP_OFFSET to the unused offset of 1024 below parallel
scratch layout.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250612172850.4170428-1-matthew.brost@intel.com
Move the VERW clearing before the MONITOR so that VERW doesn't disarm it
and the machine never enters C1.
Original idea by Kim Phillips <kim.phillips@amd.com>.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
The argument should be the string "EXPORTED_FOR_KUNIT_TESTING", not a
bare identifier.
Link: https://lore.kernel.org/r/20250616211637.111358-1-briannorris@chromium.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-7-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
To avoid a cast when calling drm_dev_wedged_event(), replace pid and
task name inside of struct amdgpu_task_info with struct
drm_wedge_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-6-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Add a section about "Task information" for the wedge API.
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-5-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
To avoid repetitive code in amdgpu, create a function that prints the
content of struct amdgpu_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-3-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Allow NULL pointers at amdgpu_vm_put_task_info() as it common practice
for "put" or "free" functions. This avoid an extra check for NULL for
callers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-2-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Add QMP handle which is used to send QMP command to always on processor
to populate DDR stats. Add QMP handle for SM8450/SM8550/SM8650/SM8750.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611-ddr_stats_-v5-3-24b16dd67c9c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recent SoCs (SM8450 onwards) require QMP command to be sent before reading
ddr stats. The duration field of ddr stats will get populated only if QMP
command is sent.
Add support to send ddr stats freqsync QMP command.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611-ddr_stats_-v5-2-24b16dd67c9c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DDR statistic provide different DDR LPM and DDR frequency statistic.
Add support to read from MSGRAM and display via debugfs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250611-ddr_stats_-v5-1-24b16dd67c9c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After a change enabling camera clock controller for all Qualcomm SM8250
boards the explicit control of the clock controller status can be removed
from the RB5 vision mezzanine dts overlay file.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable camera clock controller on all Qualcomm SM8250 derived boards
by default due to the established agreement of having all clock
controllers enabled.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523092313.2625421-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The phy_id field only shows the PHY ID of the C22 device, and the C45
device did not store its PHY ID in this field.
Add a new phy_mmd_group, and export the mmd<n>_device_id for the C45
device. These files are invisible to the C22 device.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250613131903.2961-1-yajun.deng@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct the interrupt number of ready and handover in the DTS example.
Fixes: af5da7b094 ("dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP")
Signed-off-by: Lijuan Gao <lijuan.gao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250612-correct_interrupt_for_remoteproc-v1-1-490ee6d92a1b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250611-restricted-pointers-remoteproc-v1-1-f059097ba663@linutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
PERCPU_MODULE_RESERVE defines the maximum size that can by used for the
per-CPU data size used by modules. This is 8KiB.
Commit 035fcdc4d2 ("openvswitch: Merge three per-CPU structures into
one") restructured the per-CPU memory allocation for the module and
moved the separate alloc_percpu() invocations at module init time to a
static per-CPU variable which is allocated by the module loader.
The size of the per-CPU data section for openvswitch is 6488 bytes which
is ~80% of the available per-CPU memory. Together with a few other
modules it is easy to exhaust the available 8KiB of memory.
Allocate ovs_pcpu_storage dynamically at module init time.
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/c401e017-f8db-4f57-a1cd-89beb979a277@nvidia.com
Fixes: 035fcdc4d2 ("openvswitch: Merge three per-CPU structures into one")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250613123629.-XSoQTCu@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A recent commit moved the error handling of sqpoll thread and tctx
failures into the thread itself, as part of fixing an issue. However, it
missed that tctx allocation may also fail, and that
io_sq_offload_create() does its own error handling for the task_struct
in that case.
Remove the manual task putting in io_sq_offload_create(), as
io_sq_thread() will notice that the tctx did not get setup and hence it
should put itself and exit.
Reported-by: syzbot+763e12bbf004fb1062e4@syzkaller.appspotmail.com
Fixes: ac0b8b327a ("io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function exists in both tctx.h (where it belongs) and in io_uring.h
as a remnant of before the tctx handling code got split out. Remove the
io_uring.h definition and ensure that sqpoll.c includes the tctx.h
header to get the definition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Without explicitly setting a parent for the watchdog device, the device is
registered with a NULL parent. This causes device_add() (called internally
by devm_watchdog_register_device()) to register the device under
/sys/devices/virtual, since no parent is provided. The result is:
DEVPATH=/devices/virtual/watchdog/watchdog0
To fix this, assign &pdev->dev as the parent of the watchdog device before
calling devm_watchdog_register_device(). This ensures the device is
associated with the Portwell EC platform device and placed correctly in
sysfs as:
DEVPATH=/devices/platform/portwell-ec/watchdog/watchdog0
This aligns the device hierarchy with expectations and avoids misplacement
under the virtual class.
Fixes: 8357967533 ("platform/x86: portwell-ec: Add GPIO and WDT driver for Portwell EC")
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20250616074819.63547-1-ivan.hu@canonical.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
