The WMI driver core might append an ID to the WMI device name to avoid
name collisions in case multiple WMI devices with the same GUID are
present. Update all sysfs path referring to WMI devices to inform
users about this important detail.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250610055526.23688-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250610-yoga-aux-v1-1-d6115aa1683c@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the sysfs ABI documentation that drivers should round written
values to the nearest supported value instead of returning an error.
Tested on a Fujitsu Lifebook U7720.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-3-jvanderwaa@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The charge control threshold value ranges from 0-100.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250609102115.36936-2-jvanderwaa@redhat.com
[ij: use reverse xmas-tree order]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As of commit 92ac7de317 ("gpiolib: don't allow setting values on input
lines"), the GPIO core makes sure values cannot be set on input lines.
Remove the unnecessary check.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250612074835.13800-1-brgl@bgdev.pl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shannon Nelson says:
====================
ionic: three little changes
These are three little changes for the code from inspection
and testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cancel any entries on the delayed work queue before starting
to tear down the lif to be sure there is no race with any
other events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware heartbeat value is an unsigned number, and seeing
a negative number when it gets big is a little disconcerting.
Example:
ionic 0000:24:00.0: FW heartbeat stalled at -1342169688
Print using the unsigned flag.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorganize and expand documentation for service configurations. This
reworks the `cfg_services` section by removing explicit service
combinations (e.g., asym;sym, sym;asym) and clarifying that multiple
services can be configured in any order.
Update the documentation to reflect that the attribute previously limited
to qat_4xxx devices is also applicable to qat_6xxx devices.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to configure decompression as a separate service for QAT GEN6
devices. A new arbiter configuration has been added to map the hardware
decompression threads to all ring pairs.
The decompression service is enabled via sysfs by writing "decomp" to
"/sys/bus/pci/devices/<BDF>/qat/cfg_services".
The decompression service is not supported on QAT GEN2 and GEN4 devices,
and attempting it results in an invalid write error. The existing
compression service for QAT GEN2 and GEN4 devices remains unchanged and
supports both compression and decompression operations on the same ring
pair.
Co-developed-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
padata_do_parallel() and padata_index_to_cpu() duplicate cpumask_nth().
Fix both and use the generic helper.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dedicated cpumask_next_wrap() is more verbose and better optimized
comparing to cpumask_next() followed by cpumask_first().
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function opencodes cpumask_nth(). The dedicated helper is faster
than an open for-loop.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the logic in the restore function to properly handle bank
exceptions.
The check for exceptions in the saved state should be performed before
conducting any other ringstat register checks.
If a bank was saved with an exception, the ringstat will have the
appropriate rp_halt/rp_exception bits set, causing the driver to exit
the restore process with an error. Instead, the restore routine should
first check the ringexpstat register, and if any exception was raised,
it should stop further checks and return without any error. In other
words, if a ring pair is in an exception state at the source, it should
be restored the same way at the destination but without raising an error.
Even though this approach might lead to losing the exception state
during migration, the driver will log the exception from the saved state
during the restore process.
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Fixes: bbfdde7d19 ("crypto: qat - add bank save and restore flows")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
introduced an unnecessary change that prevented enabling SR-IOV when
IOMMU is disabled. In certain scenarios, it is desirable to enable
SR-IOV even in the absence of IOMMU. Thus, restoring the previous
functionality to allow VFs to be enumerated in the absence of IOMMU.
Fixes: ca88a2bdd4 ("crypto: qat - allow disabling SR-IOV VFs")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cryptographic Accelerator Unit (CPT) support different engine groups, one
for asymmetric algorithms (only AE engines in this group), one for the
most common symmetric algorithms (all SE and all IE engines in this group),
and one for other symmetric algorithms (only SE engines in this group).
For symmetric engine (SE), we obtain the group number using
"MBOX_MSG_GET_ENG_GRP_NUM" mailbox. Let's follow a similar approach to
determine the group number for asymmetric engine (AE).
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By default, otx2_cpt_get_kcrypto_eng_grp_num() returns the engine group
number of SE engine type. Add an engine type parameter to support
retrieving the engine group number for different engine types.
Since otx2_cpt_get_kcrypto_eng_grp_num() always returns the kernel crypto
engine group number, rename it to otx2_cpt_get_eng_grp_num().
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Fixes: 16295bec63 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sha3 partial hash on s390 is in little-endian just like the
final hash. However the generic implementation produces native
or big-endian partial hashes.
Make s390 sha3 conform to that by doing the byte-swap on export
and import.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 6f90ba7065 ("crypto: s390/sha3 - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hmac export state needs to be one block-size bigger to account
for the ipad.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 08811169ac ("crypto: s390/hmac - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error occurs during queueing the engine load will never be
decremented. Fix this by moving the engine load adjustment into
the cleanup function.
Fixes: bf8f91e711 ("crypto: marvell - Add load balancing between engines")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Completion address should be 32-Byte alignment when loading
microcode.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds timeout to exit from possible infinite loop, which polls
on CPT instruction(load_fvc) completion.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no point in setting the hash state after finalisation
since the hash state must never be used again. Remove that code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dc_data structure holds data required for handling compression
operations, such as overflow buffers. In this context, the use of
managed memory allocation APIs (devm_kzalloc() and devm_kfree())
is not necessary, as these data structures are freed and
re-allocated when a device is restarted in adf_dev_down() and
adf_dev_up().
Additionally, managed APIs automatically handle memory cleanup when the
device is detached, which can lead to conflicts with manual cleanup
processes. Specifically, if a device driver invokes the adf_dev_down()
function as part of the cleanup registered with
devm_add_action_or_reset(), it may attempt to free memory that is also
managed by the device's resource management system, potentially leading
to a double-free.
This might result in a warning similar to the following when unloading
the device specific driver, for example qat_6xxx.ko:
qat_free_dc_data+0x4f/0x60 [intel_qat]
qat_compression_event_handler+0x3d/0x1d0 [intel_qat]
adf_dev_shutdown+0x6d/0x1a0 [intel_qat]
adf_dev_down+0x32/0x50 [intel_qat]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
Use unmanaged memory allocation APIs (kzalloc_node() and kfree()) for
the dc_data structure. This ensures that memory is explicitly allocated
and freed under the control of the driver code, preventing manual
deallocation from interfering with automatic cleanup.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sunset period of SHA-1 is approaching [1] and FIPS 140 certificates
have a validity of 5 years. Any distros starting FIPS certification for
their kernels now would therefore most likely end up on the NIST
Cryptographic Module Validation Program "historical" list before their
certification expires.
While SHA-1 is technically still allowed until Dec. 31, 2030, it is
heavily discouraged by NIST and it makes sense to set .fips_allowed to
0 now for any crypto algorithms that reference it in order to avoid any
costly surprises down the line.
[1]: https://www.nist.gov/news-events/news/2022/12/nist-retires-sha-1-cryptographic-algorithm
Acked-by: Stephan Mueller <smueller@chronox.de>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: John Haxby <john.haxby@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bootloader info reg for pspv6 is the same as pspv4 and pspv5.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use crypto_ahash_blocksize() and crypto_ahash_digestsize() helpers instead
of directly accessing 'struct ahash_alg' members.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove `ivlen` field of `sun8i_cipher_req_ctx`, as it is not really useful.
The iv length returned by crypto_skcipher_ivsize() is already available
everywhere and can be used instead.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In sun8i_ce_cipher_unprepare(), dma_unmap_sg() is incorrectly called with
the number of entries returned by dma_map_sg(), rather than using the
original number of entries passed when mapping the scatterlist.
To fix this, stash the original number of entries passed to dma_map_sg()
in the request context.
Fixes: 0605fa0f78 ("crypto: sun8i-ce - split into prepare/run/unprepare")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mapped SG lists are written to hash_engine->ahash_src_addr which
has the size ASPEED_HASH_SRC_DMA_BUF_LEN. Since scatterlists are
not bound in size, make sure that size is not exceeded.
If the mapped SG list is larger than the buffer, simply iterate
over it as is done in the dma_prepare case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than failing a hash larger than ASPEED_CRYPTO_SRC_DMA_BUF_LEN,
just hash them over and over again until it's done.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a hash request fails due to a DMA mapping error, or if it is too
large to fit in the the driver buffer, use a fallback to do the hash
rather than failing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the Crypto API partial block handling.
Also switch to the generic export format.
Remove final function that is no longer used by the Crypto API.
Move final padding into aspeed_ahash_dma_prepare_sg.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rather than processing a final as two separate updates, combine
them into one for the linear dma_prepare case.
This means that the total hash size is slightly reduced, but that
will be fixed up later by repeating the hash if necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only time when sham_final needs to be called in sham_finup
is when the finup request fits into the partial block. Move this
special handling into sham_update.
The comment about releaseing resources is non-sense. The Crypto
API does not mandate the use of final so the user could always go
away after an update and never come back. Therefore the driver
must not hold any resources after an update call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the from-device DMA buffer to the front of the structure.
Sort the rest by size and alignment.
Keep the partial block buffer at the end.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hmac implementation in aspeed simply duplicates what the new
ahash hmac template already does, namely construct ipad and opad
by hand and then adding them to the hash before feeding it to the
engine.
Remove them and just use the generic ahash hmac template.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250611-gpiochip-set-rv-pinctrl-renesas-v1-5-ad169a794ef0@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250611-gpiochip-set-rv-pinctrl-renesas-v1-4-ad169a794ef0@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250611-gpiochip-set-rv-pinctrl-renesas-v1-3-ad169a794ef0@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
