netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9 ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails.
Fixes: 17e0accac5 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net_sched: no longer use qdisc_tree_flush_backlog()
This series is based on a report from Gerrard Tai.
Essentially, all users of qdisc_tree_flush_backlog() are racy.
We must instead use qdisc_purge_queue().
====================
Link: https://patch.msgid.link/20250611111515.1983366-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac96 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e65 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.
We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.
Tested:
tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a non-exact phy_caps lookup, we are looking for a
supported mode that matches as closely as possible the passed speed/duplex.
Blamed patch broke that logic by returning a match too early in case
the caller asks for half-duplex, as a full-duplex linkmode may match
first, and returned as a non-exact match without even trying to mach on
half-duplex modes.
Reported-by: Jijie Shao <shaojijie@huawei.com>
Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576
Tested-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Fixes: fc81e257d1 ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9c006972c3 ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3 ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()")
Cc: stable@vger.kernel.org
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The sqpoll thread is dereferenced with rcu read protection in one place,
so it needs to be annotated as an __rcu type, and should consistently
use rcu helpers for access and assignment to make sparse happy.
Since most of the accesses occur under the sqd->lock, we can use
rcu_dereference_protected() without declaring an rcu read section.
Provide a simple helper to get the thread from a locked context.
Fixes: ac0b8b327a ("io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250611205343.1821117-1-kbusch@meta.com
[axboe: fold in fix for register.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fixes some issues in the how-to.rst:
1. Add spaces between Chinese and English or numbers;
2. Fold some long sentences or commands;
3. Revise a few improper description and add some important tips;
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Alex Shi <alexs@kernel.org>
Update to commit 413e775efa ("Documentation: fix links to mailing list
services")
scripts/checktransupdate.py reports:
Documentation/translations/zh_CN/process/2.Process.rst
commit 413e775efa ("Documentation: fix links to mailing list services")
1 commits needs resolving in total
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
Update to the commit 6e55b1cbf0 ("docs: try to encourage (netdev?)
reviewers")
scripts/checktransupdate.py reports:
Documentation/translations/zh_CN/process/7.AdvancedTopics.rst
commit 6e55b1cbf0 ("docs: try to encourage (netdev?) reviewers")
1 commits needs resolving in total
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
Update to the commit b45d8f3871 ("docs: remove the tips on how to
submit patches from MAINTAINERS")
scripts/checktransupdate.py reports:
Documentation/translations/zh_CN/process/6.Followthrough.rst
commit b45d8f3871 ("docs: remove the tips on how to submit patches
from MAINTAINERS")
1 commits needs resolving in total
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "speculation.rst" into Simplified Chinese and adjust
zh_CN/staging/index.rst.
Update the translation through commit 6382f4e4e7
("Documentation: fix speculation.rst chapter")
Signed-off-by: Cui Wei <chris.wei.cui@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
This was added by Sima +10 years ago as a solution to avoid exporting
multiple dma-bufs for the same GEM object. I tried to remove it before,
but wasn't 100% sure about all the side effects.
Now Thomas recent modified drm_gem_prime_handle_to_dmabuf() which makes
it obvious that this is a superflous step. We try to look up the DMA-buf
by handle handle and if that fails for some reason (must likely because
the handle is a duplicate) the code just use the DMA-buf from the GEM
object.
Just using the DMA-buf from the GEM object in the first place has the
same effect as far as I can see.
Some more history from Sima:
In d0b2c5334f ("drm/prime: Always add exported buffers to the handle
cache") I added this additional lookup. It wasn't part of the bugfix,
but back then the handle list was just a linked list and you could do
lookups in either direction. And I guess I felt like doing a quick lookup
before we grab the next lock makes sense. Premature optimization, I'm
confessing to the crime guilty as charged :-/
Then Chris Wilson in 077675c1e8 ("drm: Convert prime dma-buf <-> handle
to rbtree") and added 2 rb trees to support both directions. At that point
that handle2buf lookup really didn't make much sense anymore, but we just
kept it and it's been in the tree confusing people ever since.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250604113234.2520-1-christian.koenig@amd.com
Clean up the driver by removing unnecessary header includes that are no
longer referenced after the recent refactoring.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-4-18255117159@163.com
Correct the debug message for PCIE_CLIENT_INT_NFATAL_ERR from
"no fatal error" to "non fatal error interrupt received" to match the
actual interrupt semantics. This avoids confusion in log interpretation.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-3-18255117159@163.com
irq_domain_create_simple() takes a fwnode as the first argument. It can be
extracted from struct device using the dev_fwnode() helper instead of using
of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250611104348.192092-10-jirislaby@kernel.org
Samsung Galaxy S22+ (SM-S906B), codenamed g0s, is a mobile phone from
2022. It features 8GB RAM, 128/256GB UFS 3.1, Exynos 2200 SoC and a
1080x2340 Dynamic AMOLED display.
This device has an issue where cpu2 and cpu3 fail to come up
consistently, which leads to a hang later in the boot process. Disable
them until the problem is figured out.
This initial device tree configures simple-framebuffer, volume-up key and
usb.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos 2200 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy S22
(r0s), S22+ (g0s), S22 Ultra (b0s) Add minimal support for that SoC,
including psci, pmu, chipid, architecture timer and mct, pinctrl,
clocks and usb.
The devices using this SoC suffer from an issue caused by the stock
Samsung bootloader, as it doesn't configure CNTFRQ_EL0. Hence it's
needed to hardcode the adequate frequency in the timer node,
otherwise the kernel panics.
Further platform support will be added over time.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504145907.1728721-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add binding for the Samsung Galaxy S22+ (SM-S906B) board, codenamed G0S,
which is based on the Samsung Exynos2200 SoC.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250504145907.1728721-2-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The probe and remove functions in the mt8183-afe-pcm driver repeatedly uses
`&pdev->dev` for |struct device *|, but then assigns this value to
`afe->dev` and uses that in other places in the same function.
Store `&pdev->dev` in a local pointer and use that exclusively to avoid
the numerous dereferences and to make the code more consistent. Lines
are reflowed where it makes sense.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-10-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe and remove functions in the mt8183-afe-pcm driver repeatedly uses
`&pdev->dev` for |struct device *|, but then assigns this value to
`afe->dev` and uses that in other places in the same function.
Store `&pdev->dev` in a local pointer and use that exclusively to avoid
the numerous dereferences and to make the code more consistent. Lines
are reflowed where it makes sense.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-9-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AFE DMA hardware supports up to 34 bits for DMA addresses. This is
missing from the driver and prevents reserved memory regions from
working properly when the allocated region is above the 4GB line.
Fill in the related register offsets for each DAI, and also set the
DMA mask. Also fill in the LSB end register offsets for completeness.
Fixes: a94aec035a ("ASoC: mediatek: mt8183: add platform driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-8-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It is desirable to reserve memory for the audio frontend.
Allow the "memory-region" property, to be used to point to a reserved
memory region.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It is desirable to reserve memory for the audio frontend.
Allow the "memory-region" property, to be used to point to a reserved
memory region.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It is desirable to reserve memory for the audio frontend.
Allow the "memory-region" property, to be used to point to a reserved
memory region.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio subsystem sits under a controllable power domain.
Add it to the binding.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the MT8173 AFE (audio frontend) binding from text to dt-schema
in YAML. "clocks" is added to the list of required properties to match
"clock-names". And the example was slightly fixed up in style. Otherwise
everything is as before.
A contributer and maintainer for a recently added MediaTek audio binding
was chosen instead of the original submitter.
Cc: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add client id to the drm_file_error api, client id
is a unique id for each drm fd and is quite useful
for debugging.
v2: Swapped client id and client name order [Chrisitan]
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250530062929.1954784-1-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
MSI Bravo 17 (D7VF), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work properly.
Signed-off-by: Gabriel Santese <santesegabriel@gmail.com>
Link: https://patch.msgid.link/20250530005444.23398-1-santesegabriel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This function takes super_lock in shared mode, so it should release the
same lock.
Cc: stable@vger.kernel.org # v6.16-rc1
Fixes: af7551cf13 ("super: remove pointless s_root checks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://lore.kernel.org/20250611164044.GF6138@frogsfrogsfrogs
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We want to print the name in case of mkdir failure and now we will
get a cryptic (efault) as name.
Fixes: c54b386969 ("VFS: Change vfs_mkdir() to return the dentry.")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250612072245.2825938-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add the new firmware filename suffix used for SoundWire systems with
CS35L57, CS35L63 or CS35L56 later than B0 silicon. This uses the SoundWire
physical address of the amp to identify which firmware file to load on that
amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L56 B0 if .bin files are not found with the older
suffix. Some changes in wm_adsp needed to support this have been included
in this patch because they are trivial.
The allows future products with CS35L56 B0 silicon to use the same firmware
file naming as CS35L57 and cs35L63, while retaining backward compatibility
for firmware that has already been published with the old naming scheme.
The old suffix is searched first, partly because there are already many
files using that naming scheme, but also because they are a smaller subset
of all the possible fallback name options offered by wm_adsp so we know
that it will either find the qualified files or fail. All the firmware
files already published have the wmfw qualified with only the ACPI SSID and
the bin files qualified with both SSID and the suffix.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by the
address pin on the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing a redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There are already many published firmware for CS35L56 B0 silicon so this
first looks for the original name suffix, to keep backward compatibility.
If this doesn't find .bin files it will switch to using the new name suffix
so that future products using CS35L56 B0 can start to use the new suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The
change in wm_adsp needed to support this has been included in this patch
because it is fairly trivial.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by a pin on
the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing the redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There have not been any firmwares published for CS35L57 or CS35L63, so
these can safely be switched to using the SoundWire unique address as the
suffix string. Also note that the machine driver in older kernel version
only has match entries for the CS35L56 Soundwire identity so any future
product with a cs35L57 or CS35L63 would require a new kernel anyway.
There are already many published firmware for CS35L56 B0 silicon so this
keeps the original naming scheme on those, to preserve backward
compatibility.
Note that although sdw_slave.id contains a unique_id field, this cannot
be trusted because the SoundWire core code also puts magic values into it
that it uses as a flag. So the unique ID is read from the chip register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64 ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
pinctrl-intel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for the driver code.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When checking for unsupported expect an error is printed every time.
This spams the log for platforms where this is expected, e.g. ls1028a
having a Vivante (etnaviv) GPU and Mali display processor.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250523064042.3275926-1-alexander.stein@ew.tq-group.com
The number of columns relates to the width, not the height. Use the
correct variable.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Link: https://lore.kernel.org/r/20250611111307.1814876-1-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
