Bluetooth needs some way for user to get supported so_timestamping flags
for the different socket types.
Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with
struct net_device, the existing implementation can't be reused, so we
add a small one here.
Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs
slightly from netdev in that the result depends also on socket type.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the socket is a broadcast receiver fields from sockaddr_iso_bc shall
be part of the values returned to getpeername since some of these fields
are updated while doing the PA and BIG sync procedures.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Up until now it has been assumed that the application would be able to
enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has
no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry
it, so it was left unset (0x00) which means it would be unable to
synchronize if the broadcast source is using a different SID e.g. 0x04:
> HCI Event: LE Meta Event (0x3e) plen 57
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0000
Props: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Primary PHY: LE 1M
Secondary PHY: LE 2M
SID: 0x04
TX power: 127 dBm
RSSI: -55 dBm (0xc9)
Periodic advertising interval: 180.00 msec (0x0090)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1f
06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L
75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 14748507 (0xe10b5b)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0400
Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261
< HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x00 (<- Invalid)
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
So instead this changes now allow application to set HCI_SID_INVALID
which will make hci_le_pa_create_sync to wait for a report, update the
conn->sid using the report SID and only then issue PA create sync
command:
< HCI Command: LE Periodic Advertising Create Sync
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x04
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
> HCI Event: LE Meta Event (0x3e) plen 16
LE Periodic Advertising Sync Established (0x0e)
Status: Success (0x00)
Sync handle: 64
Advertising SID: 0x04
Advertiser address type: Random (0x01)
Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Advertiser PHY: LE 2M (0x02)
Periodic advertising interval: 180.00 msec (0x0090)
Advertiser clock accuracy: 0x05
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit b16b327edb.
The sysfs node introduced by this patch could potentially race with user
space. The original motivation - Support configuring altsetting from the
user space will be added by another series.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit 75ddcd5ad4.
This patch doesn't work quite well - It's observed that with this patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Although commit 75ddcd5ad4 ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds "Supported Altsettings" and "Switch Altsetting" commands
that allow the user space program to configure the altsetting freely.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3, and TRANS alt6) could pass the stress HFP test narrow
band speech and wide band speech.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Although commit 75ddcd5ad4 ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This implements host wakeup feature by reading the device tree property
wakeup-source and 'wakeup' interrupt, and nxp,wakeout-pin, and configuring
it as a FALLING EDGE triggered interrupt.
When host is suspended, a trigger from the WAKE_OUT pin of the
controller wakes it up.
To enable this feature, both device tree properties are needed to be
defined.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for host wakeup on interrupt.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
release_firmware() checks for NULL pointers internally.
Remove unneeded NULL check for fmw here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All Intel diagnostic events are part of HCI traces and there is no need
to generate coredump for the same.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 852faf8055 ("gcc-plugins: remove SANCOV gcc plugin") removes the
config CC_HAS_SANCOV_TRACE_PC, as all supported compilers include the
compiler option '-fsanitize-coverage=trace-pc' by now.
The commit however misses the important use of this config option in
Makefile.kcov to add '-fsanitize-coverage=trace-pc' to CFLAGS_KCOV.
Include the compiler option '-fsanitize-coverage=trace-pc' unconditionally
to CFLAGS_KCOV, as all compilers provide that option now.
Fixes: 852faf8055 ("gcc-plugins: remove SANCOV gcc plugin")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pending status was not being passed to user space, leading to
false test alarms when using the pending status. This patch ensures
that the pending status is correctly updated and exposed to user space
when calling getwakeuptime, preventing incorrect handling of the pending
status.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
With the introduction of stage-2 huge mappings in the pKVM hypervisor,
guest pages CMO is needed for PMD_SIZE size. Fixmap only supports
PAGE_SIZE and iterating over the huge-page is time consuming (mostly due
to TLBI on hyp_fixmap_unmap) which is a problem for EL2 latency.
Introduce a shared PMD_SIZE fixmap (hyp_fixblock_map/hyp_fixblock_unmap)
to improve guest page CMOs when stage-2 huge mappings are installed.
On a Pixel6, the iterative solution resulted in a latency of ~700us,
while the PMD_SIZE fixmap reduces it to ~100us.
Because of the horrendous private range allocation that would be
necessary, this is disabled for 64KiB pages systems.
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-11-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now np-guests hypercalls with range are supported, we can let the
hypervisor to install block mappings whenever the Stage-1 allows it,
that is when backed by either Hugetlbfs or THPs. The size of those block
mappings is limited to PMD_SIZE.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-10-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest, add a
nr_pages member for pkvm_mappings to allow EL1 to track the size of the
stage-2 mapping.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-9-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest, let's
convert pgt.pkvm_mappings to an interval tree.
No functional change intended.
Suggested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-8-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_test_clear_young_guest hypercall.
This range supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is
512 on a 4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-7-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_wrprotect_guest hypercall. This
range supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512
on a 4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-6-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_unshare_guest hypercall. This range
supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512 on a
4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-5-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for supporting stage-2 huge mappings for np-guest. Add a
nr_pages argument to the __pkvm_host_share_guest hypercall. This range
supports only two values: 1 or PMD_SIZE / PAGE_SIZE (that is 512 on a
4K-pages system).
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-4-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a helper to iterate over the hypervisor vmemmap. This will be
particularly handy with the introduction of huge mapping support
for the np-guest stage-2.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
clean_dcache_guest_page() and invalidate_icache_guest_page() accept a
size as an argument. But they also rely on fixmap, which can only map a
single PAGE_SIZE page.
With the upcoming stage-2 huge mappings for pKVM np-guests, those
callbacks will get size > PAGE_SIZE. Loop the CMOs on a PAGE_SIZE basis
until the whole range is done.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-2-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-selftest-6.16:
: .
: pKVM selftests covering the memory ownership transitions by
: Quentin Perret. From the initial cover letter:
:
: "We have recently found a bug [1] in the pKVM memory ownership
: transitions by code inspection, but it could have been caught with a
: test.
:
: Introduce a boot-time selftest exercising all the known pKVM memory
: transitions and importantly checks the rejection of illegal transitions.
:
: The new test is hidden behind a new Kconfig option separate from
: CONFIG_EL2_NVHE_DEBUG on purpose as that has side effects on the
: transition checks ([1] doesn't reproduce with EL2 debug enabled).
:
: [1] https://lore.kernel.org/kvmarm/20241128154406.602875-1-qperret@google.com/"
: .
KVM: arm64: Extend pKVM selftest for np-guests
KVM: arm64: Selftest for pKVM transitions
KVM: arm64: Don't WARN from __pkvm_host_share_guest()
KVM: arm64: Add .hyp.data section
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-6.16:
: .
: pKVM memory management cleanups, courtesy of Quentin Perret.
: From the cover letter:
:
: "This series moves the hypervisor's ownership state to the hyp_vmemmap,
: as discussed in [1]. The two main benefits are:
:
: 1. much cheaper hyp state lookups, since we can avoid the hyp stage-1
: page-table walk;
:
: 2. de-correlates the hyp state from the presence of a mapping in the
: linear map range of the hypervisor; which enables a bunch of
: clean-ups in the existing code and will simplify the introduction of
: other features in the future (hyp tracing, ...)"
: .
KVM: arm64: Unconditionally cross check hyp state
KVM: arm64: Defer EL2 stage-1 mapping on share
KVM: arm64: Move hyp state to hyp_vmemmap
KVM: arm64: Introduce {get,set}_host_state() helpers
KVM: arm64: Use 0b11 for encoding PKVM_NOPAGE
KVM: arm64: Fix pKVM page-tracking comments
KVM: arm64: Track SVE state in the hypervisor vcpu structure
Signed-off-by: Marc Zyngier <maz@kernel.org>
Usage of longjmp() was added to ensure that teardown is always run in
commit 63e6b2a423 ("selftests/harness: Run TEARDOWN for ASSERT failures")
However instead of calling longjmp() to the teardown handler it is easier to
just call the teardown handler directly from __bail().
Any potential duplicate teardown invocations are harmless as the actual
handler will only ever be executed once since
commit fff37bd32c ("selftests/harness: Fix fixture teardown").
Additionally this removes a incompatibility with nolibc,
which does not support setjmp()/longjmp().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-12-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the variant and self need to be usable
from __bail().
Make them available from the test metadata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-11-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the teardown logic needs to be usable
from __bail(). Introduce a new callback for it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-10-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the teardown logic needs to be usable
from __bail(). To access the atomic teardown conditional from there,
move it into the test metadata.
This also allows the removal of "setup_completed".
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-9-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Make the kselftest harness compatible with nolibc which does not implement
signals by replacing the signal logic with pidfds.
The code also becomes simpler.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-7-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
__sync_bool_compare_and_swap() is deprecated and requires libatomic on
GCC. Compiler toolchains don't necessarily have libatomic available, so
avoid this requirement by using atomics that don't need libatomic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-6-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The pointers to the wrappers are stored in function pointers,
preventing them from actually being inlined.
Remove the inline qualifier, aligning these wrappers with the other
functions defined through macros.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-5-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
With -Wmissing-prototypes the compiler will warn about non-static
functions which don't have a prototype defined.
As they are not used from a different compilation unit they don't need to
be defined globally.
Avoid the issue by marking the functions static.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-4-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
For tests without fixtures the variant argument is unused.
This is intentional, prevent to compiler from complaining.
Example warning:
harness-selftest.c: In function 'wrapper_standalone_pass':
../kselftest_harness.h:181:52: error: unused parameter 'variant' [-Werror=unused-parameter]
181 | struct __fixture_variant_metadata *variant) \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
../kselftest_harness.h:156:25: note: in expansion of macro '__TEST_IMPL'
156 | #define TEST(test_name) __TEST_IMPL(test_name, -1)
| ^~~~~~~~~~~
harness-selftest.c:15:1: note: in expansion of macro 'TEST'
15 | TEST(standalone_pass) {
| ^~~~
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-3-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
All comments in this file use C89 comment style.
Except for this one. Change it to get one step closer to C89
compatibility.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-2-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add a selftest for the kselftest harness itself so any changes can be
validated.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-1-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>