When translating a VNCR translation fault, we start by marking the
current SW-managed TLB as invalid, so that we can populate it
in place. This is, however, done without the mmu_lock held.
A consequence of this is that another CPU dealing with TLBI
emulation can observe a translation still flagged as valid, but
with invalid walk results (such as pgshift being 0). Bad things
can result from this, such as a BUG() in pgshift_level_to_ttl().
Fix it by taking the mmu_lock for write to perform this local
invalidation, and use invalidate_vncr() instead of open-coding
the write to the 'valid' flag.
Fixes: 069a05e535 ("KVM: arm64: nv: Handle VNCR_EL2-triggered faults")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250520144116.3667978-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The i.MX943 System Manager (SM) firmware supports the System Control
Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM.
The base offset for the i.MX943 IOMUXC Daisy input register differs from
that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for
i.MX943.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250516100423.1685732-1-ping.bai@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allows slcan to receive short messages (typically errors) from the serial
interface.
When error support was added to slcan protocol in
b32ff46685 ("can: slcan: extend the protocol
with error info") the minimum valid message size changed from 5 (minimum
standard can frame tIII0) to 3 ("e1a" is a valid protocol message, it is
one of the examples given in the comments for slcan_bump_err() ), but the
check for minimum message length prodicating all decoding was not adjusted.
This makes short error messages discarded and error frames not being
generated.
This patch changes the minimum length to the new minimum (3 characters,
excluding terminator, is now a valid message).
Signed-off-by: Carlos Sanchez <carlossanchez@geotab.com>
Fixes: b32ff46685 ("can: slcan: extend the protocol with error info")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250520102305.1097494-1-carlossanchez@geotab.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Extern is the default specifier for a function, no need to define it.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/20250520-aaeon-up-board-pinctrl-support-v6-2-dcb3756be3c6@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Davidlohr Bueso <dave@stgolabs.net> says:
Four small patches - the first could be sent to Linus for v6.15
considering it is a missing nonblocking lookup conversion in the getblk
slowpath I had missed. The other two patches are small optimizations
found while reading the code, and one rocket science cleanup patch.
* patches from https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
Link: https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
While invalidating, the clearing of the bits in discard_buffer()
is done in one fully ordered CAS operation. In the past this was
done via individual clear_bit(), until e7470ee89f (fs: buffer:
do not use unnecessary atomic operations when discarding buffers).
This implies that there were never strong ordering requirements
outside of being serialized by the buffer lock.
As such relax the ordering for archs that can benefit. Further,
the implied ordering in buffer_unlock() makes current cmpxchg
implied barrier redundant due to release semantics. And while in
theory the unlock could be part of the bulk clearing, it is
best to leave it explicit, but without the double barriers.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-5-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Get rid of those unnecessary return statements.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-4-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
__getblk_slow() already implies failing a first lookup
as the fastpath, so try to create the buffers immediately
and avoid the redundant lookup. This saves 5-10% of the
total cost/latency of the slowpath.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-3-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Just as with the fast path, call the lookup variant depending
on the gfp flags.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-2-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a random MAC address is not requested during scan request, unicast probe
response frames are only accepted if the destination address matches the
interface address. This works fine for non-ML interfaces. However, with
MLO, the same interface can have multiple links, and a scan on a link would
be requested with the link address. In such cases, the probe response frame
gets dropped which is incorrect.
Therefore, add logic to check if any of the link addresses match the
destination address if the interface address does not match.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-2-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP interface is already beaconing, a subsequent scan is not allowed
unless the user space explicitly sets the flag NL80211_SCAN_FLAG_AP in the
scan request. If this flag is not set, the scan request will be returned
with the error code -EOPNOTSUPP. However, this restriction currently
applies only to non-ML interfaces. For ML interfaces, scans are allowed
without this flag being explicitly set by the user space which is wrong.
This is because the beaconing check currently uses only the deflink, which
does not get set during MLO.
Hence to fix this, during MLO, use the existing helper
ieee80211_num_beaconing_links() to know if any of the link is beaconing.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-1-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Robert Morris reported:
|If a malicious USB device pretends to be an Intersil p54 wifi
|interface and generates an eeprom_readback message with a large
|eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the
|message beyond the end of priv->eeprom.
|
|static void p54_rx_eeprom_readback(struct p54_common *priv,
| struct sk_buff *skb)
|{
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
| struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data;
|
| if (priv->fw_var >= 0x509) {
| memcpy(priv->eeprom, eeprom->v2.data,
| le16_to_cpu(eeprom->v2.len));
| } else {
| memcpy(priv->eeprom, eeprom->v1.data,
| le16_to_cpu(eeprom->v1.len));
| }
| [...]
The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom().
The device is supposed to provide the same length back to the driver.
But yes, it's possible (like shown in the report) to alter the value
to something that causes a crash/panic due to overrun.
This patch addresses the issue by adding the size to the common device
context, so p54_rx_eeprom_readback no longer relies on possibly tampered
values... That said, it also checks if the "firmware" altered the value
and no longer copies them.
The one, small saving grace is: Before the driver tries to read the eeprom,
it needs to upload >a< firmware. the vendor firmware has a proprietary
license and as a reason, it is not present on most distributions by
default.
Cc: <stable@kernel.org>
Reported-by: Robert Morris <rtm@mit.edu>
Closes: https://lore.kernel.org/linux-wireless/28782.1747258414@localhost/
Fixes: 7cb770729b ("p54: move eeprom code into common library")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250516184107.47794-1-chunkeey@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Restructure the ITS mitigation to use select/update/apply functions like
the other mitigations.
There is a particularly complex interaction between ITS and Retbleed as CDT
(Call Depth Tracking) is a mitigation for both, and either its=stuff or
retbleed=stuff will attempt to enable CDT.
retbleed_update_mitigation() runs first and will check the necessary
pre-conditions for CDT if either ITS or Retbleed stuffing is selected. If
checks pass and ITS stuffing is selected, it will select stuffing for
Retbleed as well.
its_update_mitigation() runs after and will either select stuffing if
retbleed stuffing was enabled, or fall back to the default (aligned thunks)
if stuffing could not be enabled.
Enablement of CDT is done exclusively in retbleed_apply_mitigation().
its_apply_mitigation() is only used to enable aligned thunks.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/20250516193212.128782-1-david.kaplan@amd.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
xen_read_msr_safe() currently passes an uninitialized argument 'err' to
xen_do_read_msr(). But as xen_do_read_msr() may not set the argument,
xen_read_msr_safe() could return err with an unpredictable value.
To ensure correctness, initialize err to 0 (representing success)
in xen_read_msr_safe().
Do the same in xen_read_msr(), even err is not used after being passed
to xen_do_read_msr().
Closes: https://lore.kernel.org/xen-devel/aBxNI_Q0-MhtBSZG@stanley.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250517165713.935384-1-xin@zytor.com
Move to using the new API devm_drm_panel_alloc() to allocate the
panel.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250520-drivers-mass-convert-part2-v3-9-f7ae7b723c68@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for memory policy and
migration and add appropriate maintainers and reviewers.
[lorenzo.stoakes@oracle.com: add Ying as reviewer]
Link: https://lkml.kernel.org/r/ed6f0fc2-5608-4eea-b1be-07e3e19be263@lucifer.local
Link: https://lkml.kernel.org/r/20250515191358.205684-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Rakie Kim <rakie.kim@sk.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for Kernel Samepage
Merging (KSM) and add appropriate maintainers and reviewers.
Link: https://lkml.kernel.org/r/20250515190404.203596-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>