The calculation done by bmac_crc(addr) followed by taking the low 6 bits
and reversing them is equivalent to taking the high 6 bits from
crc32(~0, addr, ETH_ALEN). Just do that instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250513050142.635391-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change enhances the robustness of validate_userspace() by ensuring
that all Netlink attributes are fully contained within the parent
attribute. The previous use of nla_parse_nested_deprecated() could
silently skip trailing or malformed attributes, as it stops parsing at
the first invalid entry.
By switching to nla_parse_deprecated_strict(), we make sure only fully
validated attributes are copied for later use.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/67eb414e2d250e8408bb8afeb982deca2ff2b10b.1747037304.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a61 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde836 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The calculation done by calc_crc() is equivalent to
~crc32(~0, buf, len), so just use that instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250513041402.541527-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df77 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8C8t
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
Ilya Leoshkevich says:
====================
I've been looking at fixing the tailcall_bpf2bpf_hierarchy failures on
s390. One of the challenges is that when a BPF trampoline calls a BPF
prog A, the prologue of A sets the tail call count to 0. Therefore it
would be useful to know whether the trampoline is attached to some
other BPF prog B, in which case A should be called using an offset
equal to tail_call_start, bypassing the tail call count initialization.
The trampoline attachment point is passed to trampoline functions via
the orig_call variable. Unfortunately in the case of calculating the
size of a struct_ops trampoline it's NULL, and I could not think of a
good reason to have it this way. This series makes it always non-NULL.
====================
Link: https://patch.msgid.link/20250512221911.61314-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is currently some confusion in the s390x JIT regarding whether
orig_call can be NULL and what that means. Originally the NULL value
was used to distinguish the struct_ops case, but this was superseded by
BPF_TRAMP_F_INDIRECT (see commit 0c970ed2f8 ("s390/bpf: Fix indirect
trampoline generation").
The remaining reason to have this check is that NULL can actually be
passed to the arch_bpf_trampoline_size() call - but not to the
respective arch_prepare_bpf_trampoline()! call - by
bpf_struct_ops_prepare_trampoline().
Remove this asymmetry by passing stub_func to both functions, so that
JITs may rely on orig_call never being NULL.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250512221911.61314-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently a crash in a leaf prog (caused by a bug) produces the
following call trace:
[<000003ff600ebf00>] bpf_prog_6df0139e1fbf2789_fentry+0x20/0x78
[<0000000000000000>] 0x0
This is because leaf progs do not store backchain. Fix by making all
progs do it. This is what GCC and Clang-generated code does as well.
Now the call trace looks like this:
[<000003ff600eb0f2>] bpf_prog_6df0139e1fbf2789_fentry+0x2a/0x80
[<000003ff600ed096>] bpf_trampoline_201863462940+0x96/0xf4
[<000003ff600e3a40>] bpf_prog_05f379658fdd72f2_classifier_0+0x58/0xc0
[<000003ffe0aef070>] bpf_test_run+0x210/0x390
[<000003ffe0af0dc2>] bpf_prog_test_run_skb+0x25a/0x668
[<000003ffe038a90e>] __sys_bpf+0xa46/0xdb0
[<000003ffe038ad0c>] __s390x_sys_bpf+0x44/0x50
[<000003ffe0defea8>] __do_syscall+0x150/0x280
[<000003ffe0e01d5c>] system_call+0x74/0x98
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512122717.54878-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cifs_prepare_read() might be called with a disconnected channel, where
TCP_Server_Info::max_read is set to zero due to reconnect, so calling
->negotiate_rize() will set @rsize to default min IO size (64KiB) and
then logging
CIFS: VFS: SMB: Zero rsize calculated, using minimum value
65536
If the reconnect happens in cifsd thread, cifs_renegotiate_iosize()
will end up being called and then @rsize set to the expected value.
Since we can't rely on the value of @server->max_read by the time we
call cifs_prepare_read(), try to ->negotiate_rize() only if
@cifs_sb->ctx->rsize is zero.
Reported-by: Steve French <stfrench@microsoft.com>
Fixes: c59f7c9661 ("smb: client: ensure aligned IO sizes")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add support for STM32MP25 SoC. There are new counter modes that may be
implemented in later. Still, use newly introduced compatible to handle
this new HW variant and avoid being blocked with existing compatible
in SoC dtsi file. Modes supported currently still remains compatible.
New timer 20 has encoder capability, add it to the list.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-4-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Remove the custom device comparison function compare_dev and replace it
with the existing kernel helper component_compare_of
Signed-off-by: Tang Dongxing <tang.dongxing@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403155419406T5YhIJKId1FWor70EWWHG@zte.com.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.
In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.
This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.
Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.
When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This driver is taking a kobject for mtk_mutex only once per mmsys
device for each drm-mediatek driver instance, differently from the
behavior with other components, but it is decrementing the kobj's
refcount in a loop and once per mmsys: this is not right and will
result in a refcount_t underflow warning when mediatek-drm returns
multiple probe deferrals in one boot (or when manually bound and
unbound).
Besides that, the refcount for mutex_dev was not decremented for
error cases in mtk_drm_bind(), causing another refcount_t warning
but this time for overflow, when the failure happens not during
driver bind but during component bind.
In order to fix one of the reasons why this is happening, remove
the put_device(xx->mutex_dev) loop from the mtk_drm_kms_init()'s
put_mutex_dev label (and drop the label) and add a single call to
correctly free the single incremented refcount of mutex_dev to
the mtk_drm_unbind() function to fix the refcount_t underflow.
Moreover, add the same call to the error cases in mtk_drm_bind()
to fix the refcount_t overflow.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
fsck_err() needs the btree transaction passed to it if there is one - so
that it can unlock/relock around prompting userspace for fixing the
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The regmap_update_bits() function can fail, so propagate its error
up to the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-7-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The regmap_read() function can fail, so propagate its error up to
the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-6-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The armada_37xx_gpio_direction_{in,out}put() functions can fail, so
propagate their error values back to the stack instead of silently
ignoring those.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-5-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The regmap_read() function can fail, so propagate its error up to
the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-4-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The regmap_update_bits() function can fail, so propagate its error
up to the stack instead of silently ignoring that.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-3-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Changing the direction before updating the output value in the
OUTPUT_VAL register may result in a glitch on the output line
if the previous value in the OUTPUT_VAL register is different
from the one we want to set.
In order to avoid that, update the output value before changing
the direction.
Cc: stable@vger.kernel.org
Fixes: 6702abb3bf ("pinctrl: armada-37xx: Fix direction_output() callback behavior")
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The controller has two consecutive OUTPUT_VAL registers and both
holds output value for 32 GPIOs. Due to a missing adjustment, the
current code always uses the first register while setting the
output value whereas it should use the second one for GPIOs > 31.
Add the missing armada_37xx_update_reg() call to adjust the register
according to the 'offset' parameter of the function to fix the issue.
Cc: stable@vger.kernel.org
Fixes: 6702abb3bf ("pinctrl: armada-37xx: Fix direction_output() callback behavior")
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501173411.134130-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501173411.134130-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the orangefs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
[sandeen: forward-port older patch, fix SB_POSIXACL handling]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Martin Brandenburg <martin@omnibond.com>
cc: devel@lists.orangefs.org
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Fsck wants to do transaction commits from an outer context; it may have
other repair to do (i.e. duplicate backpointers).
But when calling backpointer_not_found() from runtime code, i.e. runtime
self healing, we should be doing the commit - the outer context expects
to just be doing lookups.
This fixes bugs where we get stuck spinning, reported as "RCU lock hold
time warnings.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since bch2_seek_pagecache_data() searches for dirty data, we only want
to call it for holes in the extents btree - otherwise we have an
accidental O(n^2), as we repeatedly search the same range.
Reported-by: Marcin Mirosław <marcin@mejor.pl>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
set_should_be_locked() needs to be called before peek_key_cache(), which
traverses other paths and may do a trans unlock/relock.
This fixes an assertion pop in path_peek_slot(), when the path we're
using is unexpectedly not uptodate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Before invoking bch2_accounting_mem_mod_locked in
bch2_gc_accounting_done, we already write locked mark_lock,
in bch2_accounting_mem_insert, we lock mark_lock again.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prevent jobs that do lots of scanning (i.e. evacuatee, scrub) from
causing OOMs.
The shrinker code seems to be having issues when it doesn't do any
freeing because it's just flipping off the acccessed bit - and the
accessed bit shouldn't be set on first use anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the journal is low on space, we might do discards from
journal_res_get() -> journal_entry_open().
Make sure we set j->can_discard correctly, so that if we're low on space
but not because discards aren't keeping up we don't livelock.
Fixes: 8e4d28036c ("bcachefs: Don't aggressively discard the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes btree locking assert pops users were seeing during evacuate:
https://github.com/koverstreet/bcachefs/issues/878
May 09 22:45:02 sharon kernel: bcachefs (68116e25-fa2d-4c6f-86c7-e8b431d792ae): bch2_btree_insert_node(): node not locked at level 1
May 09 22:45:02 sharon kernel: bch2_btree_node_rewrite [bcachefs]: watermark=btree no_check_rw alloc l=0-1 mode=none nodes_written=0 cl.remaining=2 journal_seq=0
May 09 22:45:02 sharon kernel: path: idx 1 ref 1:0 S B btree=alloc level=0 pos 0:3699637:0 0:3698012:1-0:3699637:0 bch2_move_btree.isra.0+0x1db/0x490 [bcachefs] uptodate 0 locks_want 2
May 09 22:45:02 sharon kernel: l=0 locks intent seq 4 node ffff8bd700c93600
May 09 22:45:02 sharon kernel: l=1 locks unlocked seq 1712 node ffff8bd6fd5e7a00
May 09 22:45:02 sharon kernel: l=2 locks unlocked seq 2295 node ffff8bd6cc725400
May 09 22:45:02 sharon kernel: l=3 locks unlocked seq 0 node 0000000000000000
Evacuate walks btree nodes with bch2_btree_iter_next_node() and rewrites
them, bch2_btree_update_start() upgrades the path to take intent locks
as far as it needs to.
But next_node() does low level unlock/relock calls on individual nodes,
and didn't handle the case where a path is supposed to be holding
multiple intent locks. If a path has locks_want > 1, it needs to be
either holding locks on all the btree nodes (at each level) requested,
or none of them.
Fix this with a bch2_btree_path_downgrade().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Fix bch2_bkey_clear_needs_rebalance(): indirect extents are never
supposed to have bch_extent_rebalance stripped off, because that's how
we get the IO path options when we don't have the original inode it
belonged to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Introduce a device tree for the HP EliteBook Ultra G1q 14" AI laptop. It
seems to be using the same baseboard as the HP OmniBook X 14 so just use
that for now.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Link: https://lore.kernel.org/r/20250429144957.2088284-4-juerg.haefliger@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>