[Why]
DMI quirks are relatively big code that makes amdgpu_dm 200 lines
larger.
[How]
Move DMI quirks into a dedicated source file and make all quirks
variables for `struct amdgpu_display_manager`.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When MST config is unplugged/replugged too quickly, it can potentially
result in a scenario where previous DC state has not been reset before
the HPD link detection sequence begins. In this case, driver will
disable the streams/link prior to re-enabling the link for link
training.
There is a bug in the current logic that does not account for the fact
that current_state can be released and cleared prior to swapping to a
new state (resulting in the pipe_ctx stream pointers to be cleared) in
between disabling streams.
To resolve this, cache the original streams prior to committing any
stream updates.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c5 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 756c85e4d0 ("drm/amd/display: Enable urgent latency adjustment on DCN35")
Reason for revert: Negative power impact.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If commands are being submitted to DMCUB while concurrently waiting for
pending commands to complete, rptr and wptr may never match again, and
reported command count will not update.
[HOW]
Modify dmub_srv_wait_for_pending to constantly check wptr and rptr
match, and update inbox status whenever a message is sent to avoid the
race and determine message completion or idle as quickly as possible.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks.
Fixes: 6732ae5cb4 ("ARM: at91: add pinctrl support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/
Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
When backing up and restoring plane states for minimal transition
cases, only configuration should be backed up and restored. Information
only relevant to the object/allocation (like refcount) should be
excluded. Also move this interface to dc_plane.h.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous patch removed smu_mode2_reset_is_support()
which was the only function to call through the mode2_reset_is_support()
method pointer.
Remove the remaining functions that were assigned to it
and the pointer itself.
See discussion at:
https://lore.kernel.org/all/DM4PR12MB5165D85BD85BC8FC8BF7A3B48E88A@DM4PR12MB5165.namprd12.prod.outlook.com/
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To resolve the warning regarding the missing error code 'r' in
amdgpu_userq_wait_ioctl(), assign the value 'r = -EINVAL'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080458.rnV8YfiY-lkp@intel.com/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace all use of DRM_DEBUG_DRIVER in amdgpu_dm.c with
drm_dbg_driver(). The latter prints the instance of the drm device
associated with the error which would helpful in debugging scenarios
involving multiple GPUs
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250506-gpiochip-set-rv-gpio-part3-v1-5-0fbdea5a9667@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull MD changes from Yu Kuai:
- Fix that normal IO can be starved by sync IO, found by mkfs on newly
created large raid5, with some clean up patches for bdev inflight
counters.
* tag 'md-6.16-20250513' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: clean up accounting for issued sync IO
md: fix is_mddev_idle()
md: add a new api sync_io_depth
md: record dm-raid gendisk in mddev
block: export API to get the number of bdev inflight IO
block: clean up blk_mq_in_flight_rw()
block: WARN if bdev inflight counter is negative
block: reuse part_in_flight_rw for part_in_flight
blk-mq: remove blk_mq_in_flight()
-----BEGIN PGP SIGNATURE-----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=2dKC
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-nvmem-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and NVMEM due for the v6.16 merge window
We will extend the firmware methods, so move it to its own module
instead to keep gpu.rs focused.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nova-frts-v3-7-fcb02749754d@nvidia.com
[ Don't require a bound device, remove pub visibility from Firmware
fields, use FIRMWARE_VERSION consistently. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The layout of NV_PMC_BOOT_0 has two small issues:
- The "chipset" field, while useful to identify a chip, is actually an
aggregate of two distinct fields named "architecture" and
"implementation".
- The "architecture" field is split, with its MSB being at a different
location than the rest of its bits.
Redefine the register layout to match its actual definition as provided
by OpenRM and expose the fully-constructed "architecture" field through
our own "Architecture" type. The "chipset" pseudo-field is also useful
to have, so keep providing it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nova-frts-v3-6-fcb02749754d@nvidia.com
[ Use Result from kernel::prelude. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add the register!() macro, which defines a given register's layout and
provide bit-field accessors with a way to convert them to a given type.
This macro will allow us to make clear definitions of the registers and
manipulate their fields safely.
The long-term goal is to eventually move it to the kernel crate so it
can be used by other drivers as well, but it was agreed to first land it
into nova-core and make it mature there.
To illustrate its usage, use it to define the layout for the Boot0
(renamed to NV_PMC_BOOT_0 to match OpenRM's naming scheme) and take
advantage of its accessors.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nova-frts-v3-5-fcb02749754d@nvidia.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Correct the ngpios entry to account for the UFS_RESET pin, which is
expected to be wired to the reset pin of the primary UFS memory and is
exported as GPIOs in addition to the real GPIOs, allowing the UFS driver
to toggle it.
Fixes: 0c4cd2cc87 ("pinctrl: qcom: add the tlmm driver for QCS8300 platforms")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-4-49a7d292befa@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Correct the ngpios entry to account for the UFS_RESET pin being exported
as a GPIO in addition to the real GPIOs, allowing the UFS driver to toggle
it.
Fixes: b698f36a9d ("pinctrl: qcom: add the tlmm driver for QCS615 platform")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-3-49a7d292befa@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Correct the gpio-ranges in the QCS8300 TLMM pin controller example to
include the UFS_RESET pin, which is expected to be wired to the reset
pin of the primary UFS memory. This allows the UFS driver to toggle it.
Fixes: 5778535972 ("dt-bindings: pinctrl: describe qcs8300-tlmm")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-2-49a7d292befa@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Correct the gpio-ranges in the QCS615 TLMM pin controller example to
include the UFS_RESET pin, which is expected to be wired to the reset
pin of the primary UFS memory. This allows the UFS driver to toggle it.
Fixes: 55c487ea60 ("dt-bindings: pinctrl: document the QCS615 Top Level Mode Multiplexer")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-1-49a7d292befa@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add myself and Javier as maintainer for drm_panic, drm_panic_qr_code
and drm_log.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250507075529.263355-1-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Describe the support for hybrid processors in intel_pstate, including
the CAS and EAS support, in the admin-guide documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1935040.CQOukoFCf9@rjwysocki.net
On some hybrid platforms some efficient CPUs (E-cores) are not connected
to the L3 cache, but there are no other differences between them and the
other E-cores that use L3. In that case, it is generally more efficient
to run "light" workloads on the E-cores that do not use L3 and allow all
of the cores using L3, including P-cores, to go into idle states.
For this reason, slightly increase the cost for all CPUs sharing the L3
cache to make EAS prefer CPUs that do not use it to the other CPUs of
the same type (if any).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2032776.usQuhbGJ8B@rjwysocki.net
Modify intel_pstate to register EM perf domains for CPUs on hybrid
platforms without SMT which causes EAS to be enabled on them when
schedutil is used as the cpufreq governor (which requires intel_pstate
to operate in the passive mode).
This change is targeting platforms (for example, Lunar Lake) where the
"little" CPUs (E-cores) are always more energy-efficient than the "big"
or "performance" CPUs (P-cores) when run at the same HWP performance
level, so it is sufficient to tell EAS that E-cores are always preferred
(so long as there is enough spare capacity on one of them to run the
given task). However, migrating tasks between CPUs of the same type
too often is not desirable because it may hurt both performance and
energy efficiency due to leaving warm caches behind.
For this reason, register a separate perf domain for each CPU and choose
the cost values for them so that the cost mostly depends on the CPU type,
but there is also a small component of it depending on the performance
level (utilization) which helps to balance the load between CPUs of the
same type.
The cost component related to the CPU type is computed with the help of
the observation that the IPC metric value for a given CPU is inversely
proportional to its performance-to-frequency scaling factor and the cost
of running code on it can be assumed to be roughly proportional to that
IPC ratio (in principle, the higher the IPC ratio, the more resources
are utilized when running at a given frequency, so the cost should be
higher).
For all CPUs that are online at the system initialization time, EM perf
domains are registered when the driver starts up, after asymmetric
capacity support has been enabled. For the CPUs that become online
later, EM perf domains are registered after setting the asymmetric
capacity for them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/6057101.MhkbZ0Pkbq@rjwysocki.net
Add a function for updating the Energy Model for a CPU after its
capacity has changed, which subsequently will be used by the
intel_pstate driver.
An EM_PERF_DOMAIN_ARTIFICIAL check is added to em_recalc_and_update()
to prevent it from calling em_compute_costs() for an "artificial" perf
domain with a NULL cb parameter which would cause it to crash.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/3637203.iIbC2pHGDl@rjwysocki.net
Move the check of the CPU capacity currently stored in the energy model
against the arch_scale_cpu_capacity() value to em_adjust_new_capacity()
so it will be done regardless of where the latter is called from.
This will be useful when a new em_adjust_new_capacity() caller is added
subsequently.
While at it, move the pd local variable declaration in
em_check_capacity_update() into the loop in which it is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/7810787.EvYhyI6sBW@rjwysocki.net
Fix the API name to free the allocated table in the example driver code
that modifies the EM. Also fix the passing of correct table when
updating the cost.
Signed-off-by: Atul Kumar Pant <atulpant.linux@gmail.com>
Link: https://patch.msgid.link/20250511071141.13237-1-atulpant.linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Policy locking was added to cpufreq_policy_is_good_for_eas() by commit
4854649b1f ("cpufreq/sched: Move cpufreq-specific EAS checks to
cpufreq") to address a theoretical race condition, but it turned out to
introduce a circular locking dependency between the policy rwsem and
sched_domains_mutex via cpuset_mutex. This leads to a board lockup on
OdroidN2 that is based on the ARM64 Amlogic Meson SoC.
Drop the policy locking from cpufreq_policy_is_good_for_eas() to address
this issue.
Fixes: 4854649b1f ("cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq")
Closes: https://lore.kernel.org/linux-pm/1bf3df62-0641-459f-99fc-fd511e564b84@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2806514.mvXUDI8C0e@rjwysocki.net
We will need to perform things like allocating DMA memory during device
creation, so make sure to take the device context that will allow us to
perform these actions. This also allows us to use Devres::access to
obtain the BAR without holding a RCU lock.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nova-frts-v3-4-fcb02749754d@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>